DGS3216-L2MGMT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
30
Rows
30
Columns
116
swL2DevCtrlCFMPortTable
table.1.3.6.1.4.1.171.11.101.2.2.1.2.21.2
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2DevCtrlCFMPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2DevCtrlCFMPortTable'
A table containing the CFM state of specified ports.
The entry of the CFM state on specified ports.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2DevCtrlCFMPortIndexThis object indicates the port number. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.101.2.2.1.2.21.2.1.1 | ||||
| swL2DevCtrlCFMPortStateThis object indicates the CFM state by port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.1.2.21.2.1.2 |
swL2VlanStaticTable
table.1.3.6.1.4.1.171.11.101.2.2.2.1
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2VlanStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2VlanStaticTable'
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Static information for a VLAN configured into the
device by (local or network) management.
device by (local or network) management.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2VlanIndexThe VLAN-ID or other identifier referring to this VLAN. | VlanId Type Constraints: range: 1..4094 | .1.3.6.1.4.1.171.11.101.2.2.2.1.1.1 | ||||
| swL2VLANAdvertisementThis object indicates if the advertisement is active or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.2.1.1.2 |
swL2VlanPortInfoTable
table.1.3.6.1.4.1.171.11.101.2.2.2.3
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2VlanPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2VlanPortInfoTable'
A table containing vlan and port role information of each port.
The table entry of vlan port information.
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2VlanPortInfoPortIndexThe port index. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.2.3.1.1 | ||||||||||
| swL2VlanPortInfoVidThe VLAN-ID assigned to a special port | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.2.3.1.2 | ||||||||||
| swL2VlanPortInfoPortRoleThe port role of a special port.when none,it means this port is not belong to the vlan. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.2.3.1.3 |
swL2PortInfoTable
table.1.3.6.1.4.1.171.11.101.2.2.3.1
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2PortInfoTable'
A table that contains information about every port.
A list of information for each port of the device.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortInfoPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.3.1.1.1 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoMediumTypeIndicates medium type of the port number. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.1.1.2 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoUnitIDIndicates ID of the unit in the system | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.3.1.1.3 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoTypeThis object indicates the connector type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.1.1.4 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoLinkStatusThis object indicates the port link status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.1.1.5 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoNwayStatusThis object indicates the port speed and duplex mode. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.1.1.6 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoErrorDisabledThis object indicates the blocking type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.1.1.8 |
swL2PortCtrlTable
table.1.3.6.1.4.1.171.11.101.2.2.3.2
·
1 row entry
·
8 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2PortCtrlTable'
A table that contains control information about every port.
A list of control information for each port of the device.
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortCtrlPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.3.2.1.1 | ||||||||||||||||
| swL2PortCtrlMediumTypeIndicates medium type of the port number. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.2.1.2 | ||||||||||||||||
| swL2PortCtrlUnitIndexIndicates ID of the unit in the device | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.3.2.1.3 | ||||||||||||||||
| swL2PortCtrlAdminStateThis object decides if the port is enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.2.1.4 | ||||||||||||||||
| swL2PortCtrlNwayStateChose the port speed, duplex mode, and N-Way function mode. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.2.1.5 | ||||||||||||||||
| swL2PortCtrlFlowCtrlStateThe flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames a… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.2.1.6 | ||||||||||||||||
| swL2PortCtrlLearningStateThis object decides if the port is locked or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.2.1.7 | ||||||||||||||||
| swL2PortCtrlMACNotifyStateThis object sets each port's MAC notification state. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.2.1.8 |
swL2PortCounterCtrlTable
table.1.3.6.1.4.1.171.11.101.2.2.3.6
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortCounterCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2PortCounterCtrlTable'
A table that used to clear counter information about every port.
A list of entry used to clear counter information for each port of the device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2PortCounterCtrlPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.3.6.1.1 | ||||
| swL2PortCounterClearCtrlThis object indicates if to clear the counters for each port of the device or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.6.1.2 |
swL2PortErrTable
table.1.3.6.1.4.1.171.11.101.2.2.3.7
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortErrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2PortErrTable'
A table that contains error information for each port.
A list of information regarding port errors on the device.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortErrPortIndexThis object indicates the module's port number.(1..Max port number in the module). | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.3.7.1.1 | ||||||||
| swL2PortErrPortStateThis object indicates the port state is enabled or disabled. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.7.1.2 | ||||||||
| swL2PortErrPortConnStatusThis object indicates whether the PortStatus is err-disabled or not. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.7.1.3 | ||||||||
| swL2PortErrPortReasonThis object describes if the reason for the port error is STP LBD or Storm control. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.3.7.1.4 |
.1.3.6.1.4.1.171.11.101.2.2.5.1
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2MulticastFilterProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2MulticastFilterProfileTable'
A table that contains information about multicast filter address.
A list of multicast filter address information for each profile ID.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2MulticastFilterProfileIndexIndicates index for each profile. | Integer32 Constraints: range: 1-24 | .1.3.6.1.4.1.171.11.101.2.2.5.1.1.1 | ||||||||||||
| swL2MulticastFilterProfileNameSpecifies a profile name for each multicast filter profile. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.171.11.101.2.2.5.1.1.2 | ||||||||||||
| swL2MulticastFilterStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.101.2.2.5.1.1.3 |
.1.3.6.1.4.1.171.11.101.2.2.5.2
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2MulticastFilterProfileAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2MulticastFilterProfileAddressTable'
A table that contains information about multicast filter address.
A list of multicast filter address information for each profile ID.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2MulticastFilterProfileIdIndexIndicates index for each profile. | Integer32 Constraints: range: 1-24 | .1.3.6.1.4.1.171.11.101.2.2.5.2.1.1 | ||||||||||||
| swL2MulticastFilterFromIpSpecifies the head IP address of a multicast address range which will be binded to a multicast filter profile. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.101.2.2.5.2.1.2 | ||||||||||||
| swL2MulticastFilterToIpSpecifies the tail IP address of a multicast address range which will be binded to a multicast filter profile. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.101.2.2.5.2.1.3 | ||||||||||||
| swL2MulticastFilterAddressStateThis object indicates the status of this entry. Setting value to createAndGo(4) will add the multicast address list specified in swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile. Setting… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.101.2.2.5.2.1.4 |
.1.3.6.1.4.1.171.11.101.2.2.5.3
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2LimitedMulticastFilterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2LimitedMulticastFilterPortTable'
A table that used to bind port to profile id.
A list of information that used to bind port to profile id.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2LimitedMulticastFilterPortIndexSpecifies port as an index. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.101.2.2.5.3.1.1 | ||||||
| swL2LimitedMulticastFilterPortAccessThis object indicates the access status for each port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.5.3.1.2 | ||||||
| swL2LimitedMulticastFilterPortProfileIDThis object specifies a profile ID list for each port. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.171.11.101.2.2.5.3.1.3 | ||||||
| swL2LimitedMulticastFilterPortProfileStatusControls the multicast filter profile list which bind to each port. When set add(2), multicast filter profile ID list which specifies in swL2LimitedMulticastFilterPortProfileID will be bound to the port. When set delete… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.5.3.1.4 |
.1.3.6.1.4.1.171.11.101.2.2.5.4
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2MulticastFilterPortMaxGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2MulticastFilterPortMaxGroupTable'
A table that contains information about max group number based on port.
A list of max group number information for each port.
| Column | Syntax | OID |
|---|---|---|
| swL2MulticastFilterPortMaxGroupPortIndexSpecifies port number as table index. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.101.2.2.5.4.1.1 |
| swL2MulticastFilterPortMaxGroupSpecifies maximum multicast filter group numbers for each port. Default value is 256. | Integer32r/w Constraints: range: 1-256 | .1.3.6.1.4.1.171.11.101.2.2.5.4.1.2 |
.1.3.6.1.4.1.171.11.101.2.2.6.1
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOSBandwidthControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2QOSBandwidthControlTable'
.
A list of information contained in the swL2QOSBandwidthControlTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOSBandwidthPortIndexIndicates the port . | Integer32 Constraints: range: 1-768 | .1.3.6.1.4.1.171.11.101.2.2.6.1.1.1 |
| swL2QOSBandwidthRxRateIndicates RX Rate(64Kbit/sec) of the specified port. Value 1024001 means no limit. | Integer32r/w Constraints: range: 64-1024001 | .1.3.6.1.4.1.171.11.101.2.2.6.1.1.2 |
| swL2QOSBandwidthTxRateIndicates TX Rate(64Kbit/sec) of the specified port. Value 1024001 means no limit. | Integer32r/w Constraints: range: 64-1024001 | .1.3.6.1.4.1.171.11.101.2.2.6.1.1.3 |
| swL2QOSBandwidthRadiusRxRateThe RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.101.2.2.6.1.1.4 |
| swL2QOSBandwidthRadiusTxRateThe TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.101.2.2.6.1.1.5 |
swL2QOSSchedulingTable
table.1.3.6.1.4.1.171.11.101.2.2.6.2
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOSSchedulingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2QOSSchedulingTable'
.
A list of information contained in the swL2QOSSchedulingTable.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2QOSSchedulingClassIndexIndicates the hardware queue number. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.101.2.2.6.2.1.1 | ||||||
| swL2QOSSchedulingMaxPktsIndicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.171.11.101.2.2.6.2.1.2 | ||||||
| swL2QOSSchedulingMechanismIndicates the mechanism of QoS scheduling. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.6.2.1.3 |
.1.3.6.1.4.1.171.11.101.2.2.6.3
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOS8021pUserPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2QOS8021pUserPriorityTable'
.
A list of information contained in the swL2QOS8021pUserPriorityTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOS8021pUserPriorityIndexThe 802.1p user priority . | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.101.2.2.6.3.1.1 |
| swL2QOS8021pUserPriorityClassThe number of the switch's hardware priority queue. The switch has seven hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority). | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.101.2.2.6.3.1.2 |
.1.3.6.1.4.1.171.11.101.2.2.6.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOS8021pDefaultPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2QOS8021pDefaultPriorityTable'
.
A list of information contained in the swL2QOS8021pDefaultPriorityTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOS8021pDefaultPriorityIndexIndicates the port number . | Integer32 Constraints: range: 1-768 | .1.3.6.1.4.1.171.11.101.2.2.6.4.1.1 |
| swL2QOS8021pDefaultPriorityThe priority value to assign to untagged packets received by the switch ports on the switch.. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.101.2.2.6.4.1.2 |
| swL2QOS8021pRadiusPriorityThe value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.101.2.2.6.4.1.3 |
.1.3.6.1.4.1.171.11.101.2.2.7.1
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortSecurityControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2PortSecurityControlTable'
A port security feature which controls the address leaning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function. When it is enabled and a number is given said N, which allows N addresses to be learned on this port, the first N learned addresses are locked at this port as static entries. When the learned addresses number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned on this port.
A list of information contained in the swL2PortSecurityControlTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortSecurityPortIndexIndicates the secured port to lock address learning. | Integer32 Constraints: range: 1-768 | .1.3.6.1.4.1.171.11.101.2.2.7.1.1.1 | ||||||||
| swL2PortSecurityMaxLernAddrIndicates allowable number of addresses to be learned on this port. | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.171.11.101.2.2.7.1.1.2 | ||||||||
| swL2PortSecurityModeIndicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that ca… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.7.1.1.3 | ||||||||
| swL2PortSecurityAdmStateIndicates administration state of locking address. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.7.1.1.4 | ||||||||
| swL2PortSecurityEntryClearCtrlUsed to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.7.1.1.5 |
swL2DhcpRelayCtrlTable
table.1.3.6.1.4.1.171.11.101.2.2.8.7
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2DhcpRelayCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2DhcpRelayCtrlTable'
This table specifies the IP address as a destination to forward (relay) DHCP packets to.
A list of information that specifies the IP address as a destination
to forward (relay) DHCP packets to.
to forward (relay) DHCP packets to.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2DhcpRelayCtrlInterfaceNameThe name of the IP interface. | OctetString Constraints: range: 1-12 | .1.3.6.1.4.1.171.11.101.2.2.8.7.1.1 | ||||||
| swL2DhcpRelayCtrlServerThe DHCP server IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.101.2.2.8.7.1.2 | ||||||
| swL2DhcpRelayCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.8.7.1.3 |
swL2TrunkCtrlTable
table.1.3.6.1.4.1.171.11.101.2.2.9.3
·
1 row entry
·
6 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2TrunkCtrlTable'
This table specifies which ports group a set of ports(up to 8) into a single logical link.
A list of information that specifies which ports group a set of
ports(up to 8) into a single logical link.
ports(up to 8) into a single logical link.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2TrunkIndexThe index number of the logical port trunk group. The trunk group number depends on the existence of unit and module. | Integer32 Constraints: range: 0-5 | .1.3.6.1.4.1.171.11.101.2.2.9.3.1.1 | ||||||||||||
| swL2TrunkMasterPortThe object indicates the master port number of the port trunk entry. When using Port Trunk, you cannot configure the other ports of the group except the master port. Their configuration must be same as the master port … | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.101.2.2.9.3.1.3 | ||||||||||||
| swL2TrunkMemberIndicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.9.3.1.4 | ||||||||||||
| swL2TrunkTypeThis object indicates the type of trunk group. static : is static trunk group lacp : is LACP trunk group . | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.9.3.1.6 | ||||||||||||
| swL2TrunkStateThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.101.2.2.9.3.1.7 | ||||||||||||
| swL2TrunkActivePortThe object indicates the active port of a special trunk group. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.9.3.1.8 |
swL2TrunkLACPPortTable
table.1.3.6.1.4.1.171.11.101.2.2.9.5
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkLACPPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2TrunkLACPPortTable'
This table specifies which ports group a set of ports(up to 8) into a single logical link.
A list of information specifies which ports group a set of
ports(up to 8) into a single logical link.
ports(up to 8) into a single logical link.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2TrunkLACPPortIndexThe index of logical port LACP. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.9.5.1.1 | ||||
| swL2TrunkLACPPortStateThe state of logical port LACP. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.9.5.1.2 |
swL2TrunkVLANTable
table.1.3.6.1.4.1.171.11.101.2.2.9.6
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2TrunkVLANTable'
This table is used to manage the VLAN trunking feature of the device.
This object is used to configure the VLAN trunking settings for each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2TrunkVLANPortThis object indicates the port being configured. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.9.6.1.1 | ||||
| swL2TrunkVLANStateThe state of the logical port LACP. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.9.6.1.2 |
swL2IGMPCtrlTable
table.1.3.6.1.4.1.171.11.101.2.2.11.3
·
1 row entry
·
13 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2IGMPCtrlTable'
The table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, there is only one entry in the table, with an index of 1. If the VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12, with an index range from 1 to 12.
The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2IGMPCtrlVidThis object indicates the IGMP control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If the VLAN is in Port-Base mode, the VID is arranged from 1 to 12, in a … | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.1 | ||||||
| swL2IGMPQueryIntervalThe frequency at which IGMP Host-Query packets are transmitted on this switch. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.2 | ||||||
| swL2IGMPMaxResponseTimeThe maximum query response time on this switch. | Integer32r/w Constraints: range: 1-25 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.3 | ||||||
| swL2IGMPRobustnessThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. | Integer32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.4 | ||||||
| swL2IGMPLastMemberQueryIntervalThe Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. | Integer32r/w Constraints: range: 1-25 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.5 | ||||||
| swL2IGMPHostTimeoutThe timer value for sending IGMP query packets when none were sent by the host on the LAN. The timer works on a per-VLAN basis. Our device will be activated to send the query messages if the timer expires. Please ref… | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.6 | ||||||
| swL2IGMPRouteTimeoutThe Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.7 | ||||||
| swL2IGMPLeaveTimerWhen a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left. | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.8 | ||||||
| swL2IGMPQueryStateThis object decides if the IGMP query is enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.11.3.1.9 | ||||||
| swL2IGMPCurrentStateThis object indicates the current IGMP query state. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.11.3.1.10 | ||||||
| swL2IGMPCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.11.3.1.11 | ||||||
| swL2IGMPFastLeaveStateThis object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following value… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.11.3.1.12 | ||||||
| swL2IGMPQueryVersionConfigure the IGMP version of query packet which will be sent by router. | Integer32r/w Constraints: range: 1-3 | .1.3.6.1.4.1.171.11.101.2.2.11.3.1.13 |
swL2IGMPQueryInfoTable
table.1.3.6.1.4.1.171.11.101.2.2.11.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPQueryInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2IGMPQueryInfoTable'
The table contains the number current IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device.
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entry are all enabled.
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entry are all enabled.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPInfoVidThis object indicates the VID of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable). | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.11.4.1.1 |
| swL2IGMPInfoQueryCountThis object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.11.4.1.2 |
| swL2IGMPInfoTxQueryCountThis object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.11.4.1.3 |
swL2IGMPRouterPortTable
table.1.3.6.1.4.1.171.11.101.2.2.11.6
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPRouterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2IGMPRouterPortTable'
The information of the router port table.
The entry of swL2IGMPRouterPortTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPRouterPortVlanidThis object indicates the VLAN ID of the router port entry. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.101.2.2.11.6.1.1 |
| swL2IGMPRouterPortVlanNameThis object indicates the VLAN name of the router port entry. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.101.2.2.11.6.1.2 |
| swL2IGMPRouterPortStaticPortListThis object indicates the static portlist of the router port entry. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.11.6.1.3 |
| swL2IGMPRouterPortDynamicPortListThis object indicates the dynamic portlist of the router port entry. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.11.6.1.4 |
| swL2IGMPRouterPortForbiddenPortListThis object indicates the forbidden portlist of the router port entry. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.11.6.1.5 |
swIGMPSnoopingGroupTable
table.1.3.6.1.4.1.171.11.101.2.2.11.11
·
1 row entry
·
9 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swIGMPSnoopingGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swIGMPSnoopingGroupTable'
The table contains the current IGMP snooping group information captured by the device.
Information about the current IGMP snooping group information which has been captured by
the device.
the device.
| Column | Syntax | OID |
|---|---|---|
| swIGMPSnoopingGroupVidThis object indicates the VID of the individual IGMP snooping group table entry. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.1 |
| swIGMPSnoopingGroupGroupAddrThis object identifies the group IP address which has been captured from the IGMP packet, on a per-VLAN basis. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.2 |
| swIGMPSnoopingGroupSourceAddrThis object identifies the source addresses. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.3 |
| swIGMPSnoopingGroupIncludePortMapThis object indicates the port list under INCLUDE mode. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.4 |
| swIGMPSnoopingGroupExcludePortMapThis object indicates the port list under EXCLUDE mode. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.5 |
| swIGMPSnoopingGroupReportCountThis object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-group basis. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.6 |
| swIGMPSnoopingGroupUpTimeThis object indicates how long since the group was detected. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.7 |
| swIGMPSnoopingGroupExpiryTimeThis object indicates the time left before this group will be aged out. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.8 |
| swIGMPSnoopingGroupRouterPortsThis object indicates the port number of the router ports. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.11.11.1.9 |
.1.3.6.1.4.1.171.11.101.2.2.11.12.3
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPDynIPMultCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2IGMPDynIPMultCtrlTable'
This table is used to manage the IGMP dynamic IP multicast.
A list of manageable entities for IGMP dynamic IP multicast.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2IGMPDynIPMultVlanStateThis object is used to disable or enable the dynamic IP multicast feature in this VLAN. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.11.12.3.1.1 | ||||
| swL2IGMPDynIPMultVlanAgeThis object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.11.12.3.1.2 |
swL2IGMPAccessAuthTable
table.1.3.6.1.4.1.171.11.101.2.2.11.20
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPAccessAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2IGMPAccessAuthTable'
This table is used to manage the IGMP Access Authentication configurations of the device.
A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.
The configuration is done per port.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2IGMPAccessAuthPortThe index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.11.20.1.1 | ||||||
| swL2IGMPAccessAuthStateThis object denotes the status of IGMP Access Authentication of the port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.11.20.1.2 |
swL2TrafficSegTable
table.1.3.6.1.4.1.171.11.101.2.2.14.1
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrafficSegTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2TrafficSegTable'
This table specifies that the port can just forward traffic to the specific port list.
A list of information which specifies the port with its traffic
forwarding list.
forwarding list.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2TrafficSegPortThe port number of the logical port. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.101.2.2.14.1.1.1 |
| swL2TrafficSegForwardPortsThe port list to which the specific port can forward traffic. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.101.2.2.14.1.1.2 |
.1.3.6.1.4.1.171.11.101.2.2.17.1
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2MulticastFilterModeVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2MulticastFilterModeVlanTable'
A table that contains information about VLAN multicast filter mode.
A list of multicast filter mode information for each VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2MulticastFilterVidIndicates VID for each VLAN. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.101.2.2.17.1.1.1 | ||||
| swL2MulticastFilterVlanModeSpecifies multicast filter mode for each VLAN. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.17.1.1.2 |
swL2LoopDetectPortTable
table.1.3.6.1.4.1.171.11.101.2.2.18.2.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2LoopDetectPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2LoopDetectPortTable'
The table specifies the loopback detection function specified by port.
The table specifies the loopback detection function specified by port.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| swL2LoopDetectPortIndexThis object indicates the module's port number. The range is from 1 to the maximum port number specified in the module | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.101.2.2.18.2.1.1.1 | ||||||||
| swL2LoopDetectPortStateThis object indicates the loopback detection function state on the port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.18.2.1.1.2 | ||||||||
| swL2LoopDetectPortLoopVLANThis object indicates the VLAN list that has detected a loopback. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.171.11.101.2.2.18.2.1.1.3 | ||||||||
| swL2LoopDetectPortLoopStatusThis object indicates the port status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.18.2.1.1.4 |
.1.3.6.1.4.1.171.11.101.2.2.24.2
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2DhcpLocalRelayVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3216-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3216-L2MGMT-MIB::swL2DhcpLocalRelayVLANTable'
This table is used to manage the DHCP local relay status for each VLAN.
This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.
corresponding DHCP local relay status.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2DhcpLocalRelayVLANIDThis object shows the VIDs of the current VLANS in the switch. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.101.2.2.24.2.1.1 | ||||||
| swL2DhcpLocalRelayVLANStateThis object indicates the status of the DHCP relay function of the VLAN. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.101.2.2.24.2.1.2 |