DGS-3620-28TC-L3MGMT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
22
Rows
22
Columns
181
swL3IpCtrlTable
table.1.3.6.1.4.1.171.11.118.1.3.2.1.3
·
1 row entry
·
23 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3IpCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3IpCtrlTable'
This table contain IP interface information.
A list of information about a specific IP interface.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3IpCtrlInterfaceNameThis object indicates the name of the IP interface. | OctetString Constraints: range: 1-12 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.1 | ||||||||||||
| swL3IpCtrlIfIndexThis object uniquely identifies the IP interface number in the swL3IpCtrlTable. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.2 | ||||||||||||
| swL3IpCtrlIpAddrThe IP address of the interface. This object only can take the value of the unicast IP address. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.3 | ||||||||||||
| swL3IpCtrlIpSubnetMaskThe IP net mask for this interface. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.4 | ||||||||||||
| swL3IpCtrlVlanNameThis object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.5 | ||||||||||||
| swL3IpCtrlProxyArpThis object indicates enable/disable of the proxy ARP function for IPv4. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.6 | ||||||||||||
| swL3IpCtrlSecondaryWhen this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.7 | ||||||||||||
| swL3IpCtrlModeThis object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The I… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.8 | ||||||||||||
| swL3IpCtrlAdminStateThe state of the IP interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.9 | ||||||||||||
| swL3IpCtrlIpv4AdminStateThe IPv4 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.10 | ||||||||||||
| swL3IpCtrlIpv6AdminStateThe IPv6 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.12 | ||||||||||||
| swL3IpCtrlIpv6LinkLocalAddressThe IPv6 link local address for this interface. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.14 | ||||||||||||
| swL3IpCtrlIpv6LinkLocalPrefixLenThe IPv6 prefix length for this IPv6 link local address. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.15 | ||||||||||||
| swL3IpCtrlStateThis variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.16 | ||||||||||||
| swL3IpCtrlIpv6LinkLocalAutoStateThe state of the IPv6 link local auto. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.17 | ||||||||||||
| swL3IpCtrlLocalProxyArpThis object indicates enable/disable of the local proxy ARP function for IPv4. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.18 | ||||||||||||
| swL3IpCtrlIpMtuThe MTU is the largest size of the IP datagram which may be transferred using a specific data link connection. The MTU value is a design parameter of a LAN and is a mutually agreed value (i.e. both ends of a link agree … | bytesSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.19 | ||||||||||||
| swL3IpCtrlDhcpv6ClientStateThe state of the Dhcpv6 Client. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.20 | ||||||||||||
| swL3IpCtrlIpDirectedBroadcastStateThe state of the IP Directed Broadcast. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.21 | ||||||||||||
| swL3IpCtrlDhcpv6ClientPDStateThe state of the Dhcpv6 Client PD. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.24 | ||||||||||||
| swL3IpCtrlDhcpv6ClientPDPrefixNameThis object indicates the name for the DHCPv6 Client PD. If the swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write. | OctetStringr/w Constraints: range: 0-12 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.25 | ||||||||||||
| swL3IpCtrlDhcpv6ClientPDPrefixThe IPv6 prefix obtained form delegation router. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.26 | ||||||||||||
| swL3IpCtrlDhcpv6ClientPDPrefixLenThe IPv6 prefix length for the prefix obtained from delegation router. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.2.1.3.1.27 |
swL3Ipv6CtrlTable
table.1.3.6.1.4.1.171.11.118.1.3.2.1.4
·
1 row entry
·
12 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3Ipv6CtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3Ipv6CtrlTable'
This table contains IPv6 information of an IP interface.
A list of IPv6 information about a specific IP interface.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL3Ipv6CtrlInterfaceNameThis object indicates the name of the IP interface. | OctetString Constraints: range: 1-12 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.1 | ||||
| swL3Ipv6CtrlMaxReassmblySizeMaximum Reassembly Size of the IP interface. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.2 | ||||
| swL3Ipv6CtrlNsRetransTimerNeighbor solicitation's retransmit timer. The unit is set in milliseconds. | Unsigned32r/w Constraints: range: 0-4294967295 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.3 | ||||
| swL3Ipv6CtrlRaStateNeighbor solicited state. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.5 | ||||
| swL3Ipv6CtrlRaMinRtrAdvIntervalThe minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInt… | Integer32r/w Constraints: range: 3-1350 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.6 | ||||
| swL3Ipv6CtrlRaMaxRtrAdvIntervalThe maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. | Integer32r/w Constraints: range: 4-1800 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.7 | ||||
| swL3Ipv6CtrlRaLifeTimeIndicates the lifetime of the router as the default router. | Integer32r/w Constraints: range: 0-9000 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.8 | ||||
| swL3Ipv6CtrlRaReachableTimeIndicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation. | Integer32r/w Constraints: range: 0-3600000 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.9 | ||||
| swL3Ipv6CtrlRaRetransTimeIndicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond. | Unsigned32r/w Constraints: range: 0-4294967295 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.10 | ||||
| swL3Ipv6CtrlRaHopLimitIndicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.11 | ||||
| swL3Ipv6CtrlRaManagedFlagWhen enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.12 | ||||
| swL3Ipv6CtrlRaOtherConfigFlagWhen enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.4.1.13 |
swL3Ipv6AddressCtrlTable
table.1.3.6.1.4.1.171.11.118.1.3.2.1.5
·
1 row entry
·
8 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3Ipv6AddressCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3Ipv6AddressCtrlTable'
This table contain IPv6 address information for each IP interface.
A list of information about a specific IPv6 address.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3Ipv6AddressCtrlInterfaceNameThis object indicates the name of the IP interface. | OctetString Constraints: range: 1-12 | .1.3.6.1.4.1.171.11.118.1.3.2.1.5.1.1 | ||||||||||||
| swL3Ipv6AddressSpecify the IPv6 address. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.171.11.118.1.3.2.1.5.1.2 | ||||||||||||
| swL3Ipv6AddressCtrlPrefixLenIndicates the prefix length of this IPv6 address. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.2.1.5.1.3 | ||||||||||||
| swL3Ipv6AddressCtrlPreferredLifeTimeIndicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xfffffff… | Unsigned32r/w Constraints: range: 0-4294967294 | .1.3.6.1.4.1.171.11.118.1.3.2.1.5.1.4 | ||||||||||||
| swL3Ipv6AddressCtrlValidLifeTimeIndicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff. | Unsigned32r/w Constraints: range: 0-4294967294 | .1.3.6.1.4.1.171.11.118.1.3.2.1.5.1.5 | ||||||||||||
| swL3Ipv6AddressCtrlOnLinkFlagWhen enabled, the address implied by the specified prefix is available on the link where the RA message is received. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.5.1.6 | ||||||||||||
| swL3Ipv6AddressCtrlAutonomousFlagWhen enabled, the specified prefix will be used to create an autonomous address configuration. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.5.1.7 | ||||||||||||
| swL3Ipv6AddressCtrlStateThis variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.2.1.5.1.8 |
.1.3.6.1.4.1.171.11.118.1.3.2.1.6
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3Ipv6DHCPv6CPDAddrCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3Ipv6DHCPv6CPDAddrCtrlTable'
This table contain the information of the IPv6 address which based on DHCPv6 client PD.
A list of information about a specific DHCPv6 Client PD IPv6 address.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3Ipv6DHCPv6CPDAddrCtrlInterfaceNameThis object indicates the name of the IP interface. | OctetString Constraints: range: 1-12 | .1.3.6.1.4.1.171.11.118.1.3.2.1.6.1.1 | ||||||||||||
| swL3Ipv6DHCPv6CPDAddrCtrlPrefixNameThis object indicates the name of the prefix based on which the IPv6 address will be generate. | OctetString Constraints: range: 1-12 | .1.3.6.1.4.1.171.11.118.1.3.2.1.6.1.2 | ||||||||||||
| swL3Ipv6DHCPv6CPDAddrCtrlIPv6addrSpecify the suffix of the IPv6 address. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.171.11.118.1.3.2.1.6.1.3 | ||||||||||||
| swL3Ipv6DHCPv6CPDAddrCtrlPrefixLenIndicates the prefix length of this IPv6 address. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.2.1.6.1.4 | ||||||||||||
| swL3Ipv6DHCPv6CPDAddrCtrlStateThis variable displays the status of the entry. The status is used for creating and deleting instances of the objects in this table. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.2.1.6.1.5 |
swL3LoopBackIpCtrlTable
table.1.3.6.1.4.1.171.11.118.1.3.2.1.8
·
1 row entry
·
6 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3LoopBackIpCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3LoopBackIpCtrlTable'
This table contains loopback IP interface information.
A list of information about a specific loopback IP interface.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3LoopBackIpCtrlInterfaceNameThis object indicates the name of the loopback IP interface. | OctetString Constraints: range: 1-12 | .1.3.6.1.4.1.171.11.118.1.3.2.1.8.1.1 | ||||||||||||
| swL3LoopBackIpCtrlIfIndexThis object uniquely identifies the loopback IP interface number in the swL3LoopBackIpCtrlTable. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.118.1.3.2.1.8.1.2 | ||||||||||||
| swL3LoopBackIpCtrlIpAddrThe IP address of the loopback interface. This object only can take the value of the unicast IP address. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.1.8.1.3 | ||||||||||||
| swL3LoopBackIpCtrlIpSubnetMaskThe IP net mask for this loopback interface. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.1.8.1.4 | ||||||||||||
| swL3LoopBackIpCtrlAdminStateThe state of the loopback IP interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.1.8.1.5 | ||||||||||||
| swL3LoopBackIpCtrlRowStatusThis variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.2.1.8.1.6 |
swL3IpFdbInfoTable
table.1.3.6.1.4.1.171.11.118.1.3.2.2.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3IpFdbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3IpFdbInfoTable'
A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets.
Information about a specific IP address for which the bridge
has some forwarding and/or filtering information.
has some forwarding and/or filtering information.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL3IpFdbInfoIpAddrA IP address for which switch has forwarding and/or filtering information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.2.1.1.1 | ||||||
| swL3IpFdbInfoIpSubnetMaskA IP net mask for this interface for which the switch has forwarding and/or filtering information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.2.1.1.2 | ||||||
| swL3IpFdbInfoPortEither the value '0', or the port number of the port on which packets having an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port … | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.118.1.3.2.2.1.1.3 | ||||||
| swL3IpFdbInfoTypeThe status of this entry. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.2.1.1.4 |
swL3IpStaticRouteTable
table.1.3.6.1.4.1.171.11.118.1.3.2.5
·
1 row entry
·
8 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3IpStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3IpStaticRouteTable'
This entity's IP static Routing table.
A particular route to a particular destination, under a particular policy.
Once an entry is built,it shouldn't be modified.That is,it just supports
create and delete actions.
Once an entry is built,it shouldn't be modified.That is,it just supports
create and delete actions.
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3IpStaticRouteDestThe destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a valu… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.5.1.1 | ||||||||||
| swL3IpStaticRouteMaskIndicate the mask to be logical-AND with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent c… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.5.1.2 | ||||||||||
| swL3IpStaticRouteBkupStateThe routing state for this route.The value SHOULD be primary(1), backup(2) or none(3). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.5.1.3 | ||||||||||
| swL3IpStaticRouteNextHopSpecifies the IP address for the next hop router. An IP address of 255.255.255.255 denotes a Null interface as the next hop. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.5.1.4 | ||||||||||
| swL3IpStaticRouteMetricSpecifies the routing metric for this route. If this metric is not used, its value will be displayed as -1. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.118.1.3.2.5.1.5 | ||||||||||
| swL3IpStaticRouteStatusThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.2.5.1.6 | ||||||||||
| swL3IpStaticRouteWeightSpecifies the weight value. Used for the weighted multipath. | Integer32r/w Constraints: range: 0-4 | .1.3.6.1.4.1.171.11.118.1.3.2.5.1.7 | ||||||||||
| swL3IpStaticRouteInterfaceNameSpecifies the name of the IP interface. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.171.11.118.1.3.2.5.1.8 |
.1.3.6.1.4.1.171.11.118.1.3.2.6.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3IpMcastStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3IpMcastStaticRouteTable'
IP multicast static routing allows you to have multicast paths diverge from the unicast paths.
A list of information about IP multicast static routes.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3IpMcastStaticRouteIpmrouteAddrIf the source IP address of the received IP multicast packet matches this Ipmrouteaddress, the RPF network is used to do an RPF check. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.6.1.1.1 | ||||||||||||
| swL3IpMcastStaticRouteIpmrouteMaskThis specifies an IP net Mask for this interface. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.6.1.1.2 | ||||||||||||
| swL3IpMcastStaticRouteRpfAddrIf the source IP address of the received IP multicast packet matches the Ipmrouteaddress, the Rpfaddress will be used to check whether the packet received is from a legal interface. If it is set to null, it means that i… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.2.6.1.1.3 | ||||||||||||
| swL3IpMcastStaticRouteRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.2.6.1.1.4 |
.1.3.6.1.4.1.171.11.118.1.3.2.7
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3IpStaticRouteTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3IpStaticRouteTunnelTable'
This entity's IPv4 static Routing tunnel table.
A particular route to a particular destination, under a particular policy.
Once an entry is built, it cannot be modified. That is, it just supports create
and delete actions.
Once an entry is built, it cannot be modified. That is, it just supports create
and delete actions.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3IpStaticRouteTunnelInterfaceNameThis object indicates the name of the IP tunnel interface. | OctetString Constraints: range: 0-12 | .1.3.6.1.4.1.171.11.118.1.3.2.7.1.1 | ||||||||||||
| swL3IpStaticRouteTunnelRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.2.7.1.2 |
swL3RelayDnsCtrlTable
table.1.3.6.1.4.1.171.11.118.1.3.3.3.6
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3RelayDnsCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3RelayDnsCtrlTable'
This table displays the current DNS relay static table.
A list of information display the current DNS relay static
table.
table.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL3RelayDnsCtrlDomainNameThe domain name of the entry. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.171.11.118.1.3.3.3.6.1.1 | ||||||
| swL3RelayDnsCtrlIpAddrThe IP address of the entry. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.3.3.6.1.2 | ||||||
| swL3RelayDnsCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.3.3.6.1.3 |
swL3Md5Table
table.1.3.6.1.4.1.171.11.118.1.3.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3Md5Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3Md5Table'
This table displays the current MD5 key table.
A list of information displays the current MD5 key table.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3Md5KeyIdThe MD5 key ID. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.118.1.3.4.1.1 | ||||||||||||
| swL3Md5KeyAn MD5 password of up to 16 bytes. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.171.11.118.1.3.4.1.2 | ||||||||||||
| swL3Md5RowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.4.1.3 |
swL3RouteRedistriTable
table.1.3.6.1.4.1.171.11.118.1.3.5
·
1 row entry
·
6 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3RouteRedistriTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3RouteRedistriTable'
Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
A list of information displaying the route redistribution table.
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3RouteRedistriSrcProtocolAllows the selection of the protocol of the source device. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.5.1.1 | ||||||||||||||||||||
| swL3RouteRedistriDstProtocolAllows the selection of the protocol of the destination device. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.5.1.2 | ||||||||||||||||||||
| swL3RouteRedistriTypeAllows the selection of one of the methods for calculating the metric value. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.5.1.3 | ||||||||||||||||||||
| swL3RouteRedistriMetricAllows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value. | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.118.1.3.5.1.4 | ||||||||||||||||||||
| swL3RouteRedistriRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.5.1.5 | ||||||||||||||||||||
| swL3RouteRedistriRouteMapNameThis Object just works when the destination protocol is BGP and indicate the route-map working when redistribute the route to BGP. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.171.11.118.1.3.5.1.6 |
swL3OspfHostTable
table.1.3.6.1.4.1.171.11.118.1.3.6
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3OspfHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3OspfHostTable'
The list of Hosts, and their metrics, that the router will advertise as host routes.
A metric to be advertised, for a given type of service, when a
given host is reachable.
given host is reachable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3OspfHostIpAddressThe IP Address of the Host. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.6.1.1 | ||||||||||||
| swL3OspfHostTOSThe Type of Service of the route being configured. | OSPF-MIBTOSType Type Constraints: range: 0..30 | .1.3.6.1.4.1.171.11.118.1.3.6.1.2 | ||||||||||||
| swL3OspfHostMetricThe Metric to be advertised. | OSPF-MIBMetricr/w Type Constraints: range: 0..65535 | .1.3.6.1.4.1.171.11.118.1.3.6.1.3 | ||||||||||||
| swL3OspfHostAreaIDThe Area the Host Entry is to be found within. By default, the area that a subsuming OSPF interface is in, or 0.0.0.0 | OSPF-MIBAreaIDr/w | .1.3.6.1.4.1.171.11.118.1.3.6.1.4 | ||||||||||||
| swL3OspfHostStatusThis variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.6.1.5 |
swL3ospfVirtIfTable
table.1.3.6.1.4.1.171.11.118.1.3.7
·
1 row entry
·
12 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3ospfVirtIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3ospfVirtIfTable'
Information about this router's virtual inter- faces.
Information about a single Virtual Interface.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3ospfVirtIfAreaIdThe Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 | OSPF-MIBAreaID | .1.3.6.1.4.1.171.11.118.1.3.7.1.1 | ||||||||||||
| swL3ospfVirtIfNeighborThe Router ID of the Virtual Neighbor. | OSPF-MIBRouterID | .1.3.6.1.4.1.171.11.118.1.3.7.1.2 | ||||||||||||
| swL3ospfVirtIfTransitDelayThe estimated number of seconds it takes to transmit a link- state update packet over this interface. | OSPF-MIBUpToMaxAge Type Constraints: range: 0..3600 | .1.3.6.1.4.1.171.11.118.1.3.7.1.3 | ||||||||||||
| swL3ospfVirtIfRetransIntervalThe number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state reque… | OSPF-MIBUpToMaxAge Type Constraints: range: 0..3600 | .1.3.6.1.4.1.171.11.118.1.3.7.1.4 | ||||||||||||
| swL3ospfVirtIfHelloIntervalThe length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. | OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535 | .1.3.6.1.4.1.171.11.118.1.3.7.1.5 | ||||||||||||
| swL3ospfVirtIfRtrDeadIntervalThe number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for t… | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.118.1.3.7.1.6 | ||||||||||||
| swL3ospfVirtIfStateOSPF virtual interface states. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.7.1.7 | ||||||||||||
| swL3ospfVirtIfEventsThe number of state changes or error events on this Virtual Link | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.118.1.3.7.1.8 | ||||||||||||
| swL3ospfVirtIfAuthTypeThe authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.171.11.118.1.3.7.1.9 | ||||||||||||
| swL3ospfVirtIfAuthKeyIf Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- ticatio… | OctetStringr/w Constraints: range: 0-256 | .1.3.6.1.4.1.171.11.118.1.3.7.1.10 | ||||||||||||
| swL3ospfVirtIfAuthKeyIDThe MD5 key ID. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.171.11.118.1.3.7.1.11 | ||||||||||||
| swL3ospfVirtIfStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.7.1.12 |
swL3ospfIfTable
table.1.3.6.1.4.1.171.11.118.1.3.8
·
1 row entry
·
24 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3ospfIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3ospfIfTable'
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.
face from the viewpoint of OSPF.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3ospfIfIpAddressThe IP address of this OSPF interface. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.8.1.1 | ||||||||||||||
| swL3ospfAddressLessIfFor the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.8.1.2 | ||||||||||||||
| swL3ospfIfAreaIdA 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | OSPF-MIBAreaIDr/w | .1.3.6.1.4.1.171.11.118.1.3.8.1.3 | ||||||||||||||
| swL3ospfIfTypeThe OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.8.1.4 | ||||||||||||||
| swL3ospfIfAdminStatThe OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is extern… | OSPF-MIBStatusr/w Type Values:
| .1.3.6.1.4.1.171.11.118.1.3.8.1.5 | ||||||||||||||
| swL3ospfIfRtrPriorityThe priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designate… | OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.171.11.118.1.3.8.1.6 | ||||||||||||||
| swL3ospfIfTransitDelayThe estimated number of seconds it takes to transmit a link state update packet over this interface. | OSPF-MIBUpToMaxAge Type Constraints: range: 0..3600 | .1.3.6.1.4.1.171.11.118.1.3.8.1.7 | ||||||||||||||
| swL3ospfIfRetransIntervalThe number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request … | OSPF-MIBUpToMaxAge Type Constraints: range: 0..3600 | .1.3.6.1.4.1.171.11.118.1.3.8.1.8 | ||||||||||||||
| swL3ospfIfHelloIntervalThe length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. | OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535 | .1.3.6.1.4.1.171.11.118.1.3.8.1.9 | ||||||||||||||
| swL3ospfIfRtrDeadIntervalThe number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for a… | OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.8.1.10 | ||||||||||||||
| swL3ospfIfPollIntervalThe larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. | OSPF-MIBPositiveInteger Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.8.1.11 | ||||||||||||||
| swL3ospfIfStateThe OSPF Interface State. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.8.1.12 | ||||||||||||||
| swL3ospfIfDesignatedRouterThe IP Address of the Designated Router. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.8.1.13 | ||||||||||||||
| swL3ospfIfBackupDesignatedRouterThe IP Address of the Backup Designated Router. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.8.1.14 | ||||||||||||||
| swL3ospfIfEventsThe number of times this OSPF interface has changed its state, or an error has occurred. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.118.1.3.8.1.15 | ||||||||||||||
| swL3ospfIfMulticastForwardingThe way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NB… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.8.1.16 | ||||||||||||||
| swL3ospfIfDemandIndicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.171.11.118.1.3.8.1.17 | ||||||||||||||
| swL3ospfIfAuthTypeThe authentication type specified for an in- terface. Additional authentication types may be assigned locally. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.171.11.118.1.3.8.1.18 | ||||||||||||||
| swL3ospfIfAuthKeyThe Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthentica… | OctetStringr/w Constraints: range: 0-256 | .1.3.6.1.4.1.171.11.118.1.3.8.1.19 | ||||||||||||||
| swL3ospfIfAuthKeyIDThe MD5 key ID. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.171.11.118.1.3.8.1.20 | ||||||||||||||
| swL3ospfIfPassiveModeAssign the designated entry to be a passive interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.8.1.21 | ||||||||||||||
| swL3ospfIfMetricThe Metric to be advertised. | OSPF-MIBMetricr/w Type Constraints: range: 0..65535 | .1.3.6.1.4.1.171.11.118.1.3.8.1.23 | ||||||||||||||
| swL3ospfIfDistributeListInTypeThe type of route filter for distribute list in. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.8.1.24 | ||||||||||||||
| swL3ospfIfDistributeListInNameThe name of route filter for distribute list in. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.171.11.118.1.3.8.1.25 |
swL3ospfAreaTable
table.1.3.6.1.4.1.171.11.118.1.3.10
·
1 row entry
·
6 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3ospfAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3ospfAreaTable'
Information describing the configured parame- ters and cumulative statistics of the router's attached areas.
Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.
ters and cumulative statistics of one of the
router's attached areas.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3ospfAreaIdA 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. | OSPF-MIBAreaID | .1.3.6.1.4.1.171.11.118.1.3.10.1.1 | ||||||||||||
swL3ospfAreaTypeobsolete The type specified for an area. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.10.1.2 | ||||||||||||
| swL3ospfAreaSummaryStateWhether the summary LSA is effective for this area. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.10.1.3 | ||||||||||||
| swL3ospfAreaMetricEnter the metric (1 - 65535; 0 for auto cost) of this area. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.118.1.3.10.1.4 | ||||||||||||
| swL3ospfAreaTranslateState. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.10.1.5 | ||||||||||||
| swL3ospfAreaStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.10.1.6 |
swL3dvmrpInterfaceTable
table.1.3.6.1.4.1.171.11.118.1.3.12
·
1 row entry
·
8 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3dvmrpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3dvmrpInterfaceTable'
The (conceptual) table listing the router's multicast- capable interfaces.
An entry (conceptual row) in the dvmrpInterfaceTable. This
row augments ipMRouteInterfaceEntry in the IP Multicast MIB,
where the threshold object resides.
row augments ipMRouteInterfaceEntry in the IP Multicast MIB,
where the threshold object resides.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3dvmrpInterfaceIfIndexThe ifIndex value of the interface for which DVMRP is enabled. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.12.1.1 | ||||||||||||
| swL3dvmrpInterfaceLocalAddressThe IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interface on the system. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.12.1.2 | ||||||||||||
| swL3dvmrpInterfaceMetricThe distance metric for this interface which is used to calculate distance vectors. | Integer32r/w Constraints: range: 1-31 | .1.3.6.1.4.1.171.11.118.1.3.12.1.3 | ||||||||||||
| swL3dvmrpInterfaceProbeProbe distribution interval. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.118.1.3.12.1.4 | ||||||||||||
| swL3dvmrpInterfaceNbrTimeoutUsed to set the timer before neighbors are timed out. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.118.1.3.12.1.5 | ||||||||||||
| swL3dvmrpInterfaceStatusThe status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the virtual interface. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.12.1.6 | ||||||||||||
| swL3dvmrpInterfaceRcvBadPktsThe number of DVMRP packets received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a route report from an unknown neighbor). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.118.1.3.12.1.7 | ||||||||||||
| swL3dvmrpInterfaceRcvBadRoutesThe number of routes, in valid DVMRP packets, which were ignored because the entry was invalid. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.118.1.3.12.1.8 |
.1.3.6.1.4.1.171.11.118.1.3.13.1
·
1 row entry
·
8 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3OspfInternalLsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3OspfInternalLsdbTable'
The OSPF Process's Link State Database.
A single Link State Advertisement.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3OspfInternalLsdbAreaIdThe 32 bit identifier of the Area from which the LSA was received. | OSPF-MIBAreaID | .1.3.6.1.4.1.171.11.118.1.3.13.1.1.1 | ||||||||||||||
| swL3OspfInternalLsdbTypeThe type of the link state advertisement. Each link state type has a separate advertise- ment format. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.13.1.1.2 | ||||||||||||||
| swL3OspfInternalLsdbLsidThe Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.13.1.1.3 | ||||||||||||||
| swL3OspfInternalLsdbRouterIdThe 32 bit number that uniquely identifies the originating router in the Autonomous System. | OSPF-MIBRouterID | .1.3.6.1.4.1.171.11.118.1.3.13.1.1.4 | ||||||||||||||
| swL3OspfInternalLsdbMetricEnter the metric (1 - 65535; 0 for auto cost) of this area. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.118.1.3.13.1.1.5 | ||||||||||||||
| swL3OspfInternalLsdbSequenceNoThe sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t… | OctetString Constraints: range: 4-4 | .1.3.6.1.4.1.171.11.118.1.3.13.1.1.6 | ||||||||||||||
| swL3OspfInternalLsdbAgeThis field is the age of the link state adver- tisement in seconds. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.118.1.3.13.1.1.7 | ||||||||||||||
| swL3OspfInternalLsdbChecksumThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.13.1.1.8 |
.1.3.6.1.4.1.171.11.118.1.3.13.2
·
1 row entry
·
10 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3OspfExternalLsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3OspfExternalLsdbTable'
The OSPF Process's Links State Database.
A single Link State Advertisement.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL3OspfExternalLsdbTypeThe type of the link state advertisement. Each link state type has a separate advertise- ment format. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.13.2.1.1 | ||||||
| swL3OspfExternalLsdbLsidThe Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.13.2.1.2 | ||||||
| swL3OspfExternalLsdbRouterIdThe 32 bit number that uniquely identifies the originating router in the Autonomous System. | OSPF-MIBRouterID | .1.3.6.1.4.1.171.11.118.1.3.13.2.1.3 | ||||||
| swL3OspfExternalLsdbMetricEnter the metric (1 - 65535; 0 for auto cost) of this area. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.118.1.3.13.2.1.4 | ||||||
| swL3OspfExternalLsdbMetricTypeEnter the metric type of this area. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.13.2.1.5 | ||||||
| swL3OspfExternalLsdbSequenceNoThe sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t… | OctetString Constraints: range: 4-4 | .1.3.6.1.4.1.171.11.118.1.3.13.2.1.6 | ||||||
| swL3OspfExternalLsdbAgeThis field is the age of the link state adver- tisement in seconds. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.118.1.3.13.2.1.7 | ||||||
| swL3OspfExternalLsdbChecksumThis field is the checksum of the complete contents of the advertisement, except the age field. The age field is the exception so that an advertisement's age can be incremented without updating the checksum. Th… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.13.2.1.8 | ||||||
| swL3OspfExternalLsdbForwardingAddressThis field is the forwarding address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.13.2.1.9 | ||||||
| swL3OspfExternalLsdbRouteTagThis field is the route tag. | OctetString | .1.3.6.1.4.1.171.11.118.1.3.13.2.1.10 |
swL3VrrpOperTable
table.1.3.6.1.4.1.171.11.118.1.3.14.1
·
1 row entry
·
16 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3VrrpOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3VrrpOperTable'
Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'swL3vrrpOperEntry' items.
An entry in the vrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.
Rows in the ta…
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.
Rows in the ta…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3VrrpOperIfIndexThe ifIndex value of the interface for which VRRP is enabled. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.1 | ||||||||||||
| swL3VrrpOperVrIdThis object contains the Virtual Router Identifier (VRID). | VrId Type Constraints: range: 1..255 | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.2 | ||||||||||||
| swL3VrrpOperVirtualMacAddrThe virtual MAC address of the virtual router. Although this object can be derived from the 'swL3VrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRR… | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.3 | ||||||||||||
| swL3VrrpOperStateThe current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup'… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.14.1.1.4 | ||||||||||||
| swL3VrrpOperAdminStateThis object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `swL3VrrpOperP… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.14.1.1.5 | ||||||||||||
| swL3VrrpOperPriorityThis object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to… | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.6 | ||||||||||||
| swL3VrrpOperMasterIpAddrThe master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.7 | ||||||||||||
| swL3VrrpOperCriticalIpAddrIn the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `swL3VrrpOperMasterIpAddr', should the virtual router transition from backup … | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.8 | ||||||||||||
| swL3VrrpOperCheckCriticalIpStateCritical IP state. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.14.1.1.9 | ||||||||||||
| swL3VrrpOperAuthTypeAuthentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on th… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.14.1.1.10 | ||||||||||||
| swL3VrrpOperAuthKeyThe Authentication Key. This object is set according to the value of the 'swL3VrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent wil… | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.11 | ||||||||||||
| swL3VrrpOperAdvertisementIntervalThe time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. | secondsInteger32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.12 | ||||||||||||
| swL3VrrpOperPreemptModeControls whether a higher priority virtual router will preempt a lower priority master. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.13 | ||||||||||||
| swL3VrrpOperVirtualRouterUpTimeThis is the value of the `sysUpTime' object when this virtual router (i.e., the `swL3VrrpOperState') transitioned out of `initialized'. | SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.14 | ||||||||||||
| swL3VrrpOperVirtualIpAddrThe assigned IP addresses that a virtual router is responsible for backing up. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.15 | ||||||||||||
| swL3VrrpOperRowStatusThe row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corres… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.14.1.1.16 |
.1.3.6.1.4.1.171.11.118.1.3.19
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3RIPInboundRouteFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3RIPInboundRouteFilterTable'
The list of inbound route filter on RIP interfaces.
The information of inbound route filter on RIP interfaces.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL3RIPInboundRouteFilterIfIpAddressThe IP Address of the RIP interface. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.118.1.3.19.1.1 | ||||
| swL3RIPInboundRouteFilterTypeThe type of inbound route filter for the RIP interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.19.1.2 | ||||
| swL3RIPInboundRouteFilterNameThe name of inbound route filter for the RIP interface. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.171.11.118.1.3.19.1.3 |
swL3Route6RedistriTable
table.1.3.6.1.4.1.171.11.118.1.3.20
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL3Route6RedistriTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3620-28TC-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3620-28TC-L3MGMT-MIB::swL3Route6RedistriTable'
IPv6 Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
A list of information displaying the IPv6 route redistribution table.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL3Route6RedistriSrcProtocolAllows the selection of the protocol of the source device. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.20.1.1 | ||||||||||||
| swL3Route6RedistriDstProtocolAllows the selection of the protocol of the destination device. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.20.1.2 | ||||||||||||
| swL3Route6RedistriTypeAllows the selection of one of the methods for calculating the metric value. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.118.1.3.20.1.3 | ||||||||||||
| swL3Route6RedistriMetricAllows the entry of an OSPFv3 interface cost. This is analogous to a Hop Count in the RIPng routing protocol. The value '0' indicates default value. | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.118.1.3.20.1.4 | ||||||||||||
| swL3Route6RedistriRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.118.1.3.20.1.5 |