 aniDevTrapSuSyncAcquired | .1.3.6.1.4.1.4325.2.10.0.1 | This trap is generated by LKAD when SYNC is acquired. |
| aniDevTrapModemPllNotLocked | .1.3.6.1.4.1.4325.2.10.0.10 | The Modem PLL (Phase Locked Loop) not locked trap. |
| aniDevTrapModemPllNotLockedClear | .1.3.6.1.4.1.4325.2.10.0.11 | PLL (Phase Locked Loop) not locked trap cleared.
This trap is sent out to indicate that the
aniDevTrapModemPllNotLocked alarm is cleared. |
| aniDevTrapRadioVoltReg | .1.3.6.1.4.1.4325.2.10.0.12 | indicates a Radio Voltage Failure.
It is sent out by both BSU and SU. |
| aniDevTrapRadioVoltRegClear | .1.3.6.1.4.1.4325.2.10.0.13 | is sent out when aniDevTrapRadioVoltReg
(Radio Voltage Failure) alarm is cleared.
It is sent out by both BSU and SU. |
| aniDevTrapRadioSynthNotLocked | .1.3.6.1.4.1.4325.2.10.0.14 | is generated when the Radio Synthesizer
is not locked.
It is sent out by BSU and SU. |
| aniDevTrapRadioSynthNotLockedClear | .1.3.6.1.4.1.4325.2.10.0.15 | is sent out by BSU and SU to indicate that
aniDevTrapRadioSynthNotLocked is cleared. |
| aniDevTrapBsuFanStatus | .1.3.6.1.4.1.4325.2.10.0.16 | is sent out when a fan on BSU is not
operational. |
| aniDevTrapBsuFanStatusClear | .1.3.6.1.4.1.4325.2.10.0.17 | is sent to indicate that aniDevTrapBsuFanStatus
is cleared, that is, the fan on BSU is operational again. |
| aniDevTrapBsuDc12vStatus | .1.3.6.1.4.1.4325.2.10.0.18 | is generated when a 12V DC power failure occurs
on the BSU. |
| aniDevTrapBsuDc12vStatusClear | .1.3.6.1.4.1.4325.2.10.0.19 | indicates that aniDevTrapBsuDc12vStatus alarm
on the BSU has been cleared. |
| aniDevTrapBsuSuUp | .1.3.6.1.4.1.4325.2.10.0.2 | is sent out by BSU to report that SU is
operational. |
| aniDevTrapMssPllNotLocked | .1.3.6.1.4.1.4325.2.10.0.20 | L (Phase Locked Loop) not locked trap
which is sent out by BSU. |
| aniDevTrapMssPllNotLockedClear | .1.3.6.1.4.1.4325.2.10.0.21 | indicates that aniDevTrapMssPllNotLocked alarm
on the BSU has been cleared. |
| aniDevTrapBsuTempTooLow | .1.3.6.1.4.1.4325.2.10.0.22 | ates that the temperature on the BSU is below
the operating limits. A temperature sensor on the BSU
checks the operating temperature of the system board. |
| aniDevTrapBsuTempTooHigh | .1.3.6.1.4.1.4325.2.10.0.23 | ates that the temperature on the BSU is above
the operating limits. A temperature sensor on the BSU
checks the operating temperature of the system board. |
| aniDevTrapBsuTempNormal | .1.3.6.1.4.1.4325.2.10.0.24 | ates that the temperature on the BSU is within
the operating limits.
It shows that either the aniDevTrapBsuTempTooLow or
aniDevTrapBsuTempTooHigh alarm on the BSU has been cleared. |
| aniDevTrapFlashSpaceTooLow | .1.3.6.1.4.1.4325.2.10.0.25 | is sent out when the disk space on file system
is too low.
It can be sent out by either BSU or SU. |
| aniDevTrapFlashSpaceNormal | .1.3.6.1.4.1.4325.2.10.0.26 | is sent out when the disk space on file system
is again normal.
It can be sent out by either BSU or SU to clear the
aniDevTrapFlashSpaceTooLow alarm. |
| aniDevTrapNvramCorrupted | .1.3.6.1.4.1.4325.2.10.0.27 | is sent out when the NVRAM is corrupted.
64 kB of NVRAM is allocated from the first block
of flash on both BSU and SU. A checksum is maintained
whenever some value if stored in it. |
| aniDevTrapNvramCorruptionClear | .1.3.6.1.4.1.4325.2.10.0.28 | indicates that aniDevTrapNvramCorrupted
alarm has been cleared. |
| aniDevTrapFileSysCorrupted | .1.3.6.1.4.1.4325.2.10.0.29 | indicates that the file system
has been corrupted.
It can be sent out by either BSU or SU. |
| aniDevTrapBsuSuDown | .1.3.6.1.4.1.4325.2.10.0.3 | This trap is sent out by BSU to report that SU is down. |
| aniDevTrapFileSysCorruptionClear | .1.3.6.1.4.1.4325.2.10.0.30 | indicates that aniDevTrapFileSysCorrupted
alarm has been cleared.
It can be sent out by either BSU or SU. |
| aniDevTrapSmtpConnectFailure | .1.3.6.1.4.1.4325.2.10.0.31 | is sent out when the connection to the
SMTP server fails.
It can be sent out by either BSU or SU. |
| aniDevTrapSmtpDisabled | .1.3.6.1.4.1.4325.2.10.0.32 | is sent out when SMTP is disabled on the
system (either BSU or SU). |
| aniDevTrapSwWatchdogReset | .1.3.6.1.4.1.4325.2.10.0.33 | is sent out when SU is reset by the Software
Watchdog. The Software Watchdog feature detects low memory
and task suspended cases, sends out the trap and reboots
the device. |
| aniDevTrapNatFailure | .1.3.6.1.4.1.4325.2.10.0.34 | is sent out when NAT failure occurs.
It is sent out by SU. |
| aniDevTrapCurrentImageCorrupted | .1.3.6.1.4.1.4325.2.10.0.35 | is sent out to indicate that the current image
is corrupted.
It can be sent out by both BSU or SU. |
| aniDevTrapBsuSuFailedReg | .1.3.6.1.4.1.4325.2.10.0.36 | This trap is sent out when the BSU-SU registration fails. |
| aniDevTrapDefaultConfigFileNotFound | .1.3.6.1.4.1.4325.2.10.0.37 | is sent out when the default configuration
file is not found.
It can be sent out by both BSU or SU. |
| aniDevTrapCurrentBsuState | .1.3.6.1.4.1.4325.2.10.0.38 | This trap shows the current BSU State. |
| aniDevTrapCurrentSuState | .1.3.6.1.4.1.4325.2.10.0.39 | This trap shows the current SU State. |
| aniDevTrapSuBsuUp | .1.3.6.1.4.1.4325.2.10.0.4 | is sent out by SU to report that BSU is
operational. |
| aniDevTrapMemBufferTooLow | .1.3.6.1.4.1.4325.2.10.0.40 | is sent out when the memory buffer is too low.
It can be sent out by either BSU or SU. |
| aniDevTrapMemBufferNormal | .1.3.6.1.4.1.4325.2.10.0.41 | is sent out when the memory buffer is again
normal.
It can be sent out by either BSU or SU to clear the
aniDevMemBufferTooLow alarm. |
| aniDevTrapConfigFileVersionCheckFailure | .1.3.6.1.4.1.4325.2.10.0.42 | is sent out when there is a problem in the version
of the config file. It is sent out when either the version
information is missing or if there is a mismatch in the
version. |
| aniDevTrapDefaultFileVersionCheckFailure | .1.3.6.1.4.1.4325.2.10.0.43 | is sent out when there is a problem in the version
of the default file. It is sent out when either the version
information is missing or if there is a mismatch in the
version. |
| aniDevTrapConfigFileUploadFailure | .1.3.6.1.4.1.4325.2.10.0.44 | is sent out when the upload of the config file
fails. |
| aniDevTrapConfigFileUploadChecksumFailure | .1.3.6.1.4.1.4325.2.10.0.45 | is sent out when there is a checksum error
on the config file after the upload. |
| aniDevTrapRunningBaselineImage | .1.3.6.1.4.1.4325.2.10.0.46 | is sent out when a baseline image is
running. |
| aniDevTrapPowerSupplyFailure | .1.3.6.1.4.1.4325.2.10.0.48 | is sent out by the BSU when there is a power
supply failure. |
| aniDevTrapPowerSupplyNormal | .1.3.6.1.4.1.4325.2.10.0.49 | is sent out by the BSU when the power supply is
normal again. It is sent out to indicate that the
aniDevTrapPowerSupplyFailure alarm is cleared. |
| aniDevTrapSuBsuDown | .1.3.6.1.4.1.4325.2.10.0.5 | This trap is sent out by SU to report that BSU is down. |
| aniDevTrapRealtimeClockFailure | .1.3.6.1.4.1.4325.2.10.0.50 | is sent out by the BSU when there is a real time
clock failure. |
| aniDevTrapRealtimeClockNormal | .1.3.6.1.4.1.4325.2.10.0.51 | is sent out by the BSU when the real time clock
is normal again. It is sent out to indicate that the
aniDevTrapRealtimeClockFailure alarm is cleared. |
| aniDevTrapModelNumFailure | .1.3.6.1.4.1.4325.2.10.0.53 | is sent out when there is an error
related to the model number. |
| aniDevTrapConfigParseFailure | .1.3.6.1.4.1.4325.2.10.0.55 | is sent out when there is an error in
the parsing of the configuration file. |
aniDevUpdateInventory
| .1.3.6.1.4.1.4325.2.10.0.56 | is sent out to notify configuration change in
SU customer name. |
aniDevTrapPppFailure
| .1.3.6.1.4.1.4325.2.10.0.57 | This trap is sent out whenever PPP fails to establish a session. |
aniDevTrapPppStatus
| .1.3.6.1.4.1.4325.2.10.0.58 | This trap is sent whenever a PPP link goes up or down. |
aniDevTrapFrequencyChange
| .1.3.6.1.4.1.4325.2.10.0.59 | is sent out whenever the channel frequency
is changed on the BSU and SU while they are in the
operational state. |
| aniDevTrapDhcpFailure | .1.3.6.1.4.1.4325.2.10.0.6 | This trap is generated when DHCP fails. |
aniDevTrapPPPoeSessionUp
| .1.3.6.1.4.1.4325.2.10.0.62 | This trap is sent out whenever the when a PPPoE Session comes up. |
aniDevTrapPPPoeOfferError
| .1.3.6.1.4.1.4325.2.10.0.63 | is sent out whenever the when no valid PPPoE Active Discovery Offer (PADO)
is received in response to a PPPoE Active Discovery Initiation (PADI) packet
or if no valid PPPoE Active Discovery Session-confirmation (PADS) is received
in response to a PPPoE Active Discovery Request (PADR) packet. |
aniDevTrapPPPoeSessionTerminate
| .1.3.6.1.4.1.4325.2.10.0.64 | This trap is sent out when a PPPoE Session is terminated. |
aniDevTrapEtherAutoNegotiate
| .1.3.6.1.4.1.4325.2.10.0.65 | This trap is sent out when device go back to auto-negotiate mode. |
| aniDevTrapRadioInitError | .1.3.6.1.4.1.4325.2.10.0.66 | is sent out when the radio can't be initialized.
Under an error condition this event will be generated prior to
SU becoming operational. |
| aniDevTrapMaxPowerError | .1.3.6.1.4.1.4325.2.10.0.67 | is sent out when when the radio board can't reach maximum
configured power. This can be caused by a combination of faulty
(or very long) coaxial cable connecting IDU and ODU and/or extremely
hot weather or just bad calibration data on the radio board. |
| aniDevTrapMaxPowerErrorClear | .1.3.6.1.4.1.4325.2.10.0.68 | This trap is sent out when the event aniDevTrapMaxPowerError has been cleared. |
| aniDevTrapAgcTableNotCalibrated | .1.3.6.1.4.1.4325.2.10.0.69 | is sent out when the AGC Table is not calibrated.
SODU platform relies on accurate calibration of the receive gain
throughout the entire receive chain. If the table is not correctly calibrated
or gets corrupted in the field, the SODU will have to fall back on default receive
power adjustment algorithm, which may be far from optimal. This problem doesn't stop
an SODU from getting operational but the downstream link quality can suffer. |
| aniDevTrapConfigDownloadFailure | .1.3.6.1.4.1.4325.2.10.0.7 | This trap is generated when Config file download fails. |
| aniDevTrapFreqTableInvalidEntry | .1.3.6.1.4.1.4325.2.10.0.70 | This trap is sent out whenever the frequency table contains an invalid entry. |
| aniDevTrapHtmlUnzippedError | .1.3.6.1.4.1.4325.2.10.0.71 | is sent out when html compressed zip files are either missing or
corrupted. |
| aniDevTrapBootLineBackupUpdated | .1.3.6.1.4.1.4325.2.10.0.72 | is sent out whenever the backup bootline parameters are updated to bring
them in sync with the actual boot parameters. |
| aniDevTrapBootLineRestoredFromBackup | .1.3.6.1.4.1.4325.2.10.0.73 | is sent out when the main bootline parameters are corrupted
and the system has to fall back on backup boot parameters. |
| aniDevTrapNvramBackupUpdated | .1.3.6.1.4.1.4325.2.10.0.74 | is sent out whenever the backup copy of NVRAM configuration
parameters is updated to bring them in sync with the actual NVRAM configuration. |
| aniDevTrapNvramRestoredFromBackup | .1.3.6.1.4.1.4325.2.10.0.75 | is sent out when the main NVRAM configuration data is corrupted
and the system has to fall back on backup NVRAM configuration. |
| aniDevTrapRamTooLow | .1.3.6.1.4.1.4325.2.10.0.8 | is sent out to indicate that the RAM is
too low. |
| aniDevTrapRamNormal | .1.3.6.1.4.1.4325.2.10.0.9 | is sent out to indicate that the RAM
available is normal.
This trap is sent out to indicate that the
aniDevTrapRamTooLow alarm is cleared. |
aniDevTrap 
aniDevControlTrapGeneration