DES7200-DHCP-SNOOPING-MIB Table View

A table provides the mechanism to configure the trust
state for DHCP Snooping purpose at each physical interface
capable of this feature. Some of the interfaces
(but not limited to) for which this feature might be
applicable are: ifType = ethernetCsmacd(6).

mySNDhcpIfTrustEntry row .1.3.6.1.4.1.171.10.97.2.42.1.2.1.1

A row instance contains the configuration to enable
or disable trust state for DHCP Snooping at each physical
interface capable of this feature.

Indexes

mySNDhcpIfTrustIndex

Column	Syntax	OID
mySNDhcpIfTrustIndex	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.10.97.2.42.1.2.1.1.1
mySNDhcpIfTrustEnable This object indicates whether the interface is trusted for DHCP Snooping purpose. If this object is set to 'true', the interface is trusted. DHCP packets coming to this interface will be forwarded without checking. If …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.97.2.42.1.2.1.1.2

A table provides the mechanism to configure the suppression
state for DHCP Snooping purpose at each physical interface
capable of this feature. Some of the interfaces
(but not limited to) for which this feature might be
applicable are: ifType = ethernetCsmacd(6).

mySNDhcpIfSuppressionEntry row .1.3.6.1.4.1.171.10.97.2.42.1.2.2.1

A row instance contains the configuration to enable
or disable suppression state for DHCP Snooping at each physical
interface capable of this feature.

Indexes

mySNDhcpIfSuppressionIndex

Column	Syntax	OID
mySNDhcpIfSuppressionIndex This object indicates the interface open Suppression	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.10.97.2.42.1.2.2.1.1
mySNDhcpIfSuppressionEnable This object indicates whether the interface is suppression for DHCP Snooping purpose. If this object is set to 'true', the interface is suppressed. DHCP packets coming to this interface will be ingnored. If this object…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.97.2.42.1.2.2.1.2

A table provides the mechanism to configure the DHCP Snooping 
binding database set as IP+MAC Address binding.

mySNDhcpAddressBindEntry row .1.3.6.1.4.1.171.10.97.2.42.1.2.3.1

A row instance contains the configuration to enable
or disable address bind for DHCP Snooping at each physical
interface capable of this feature.

Indexes

mySNDhcpAddressBindIndex

Column	Syntax	OID
mySNDhcpAddressBindIndex This object indicates the interface open Address binding.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.10.97.2.42.1.2.3.1.1
mySNDhcpAddressBindEnable This object indicates if DHCP Snooping Address Binding is enabled. Setting this object to 'true', DHCP binding entry is set as Address binding entrys; Otherwise, this funciton is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.97.2.42.1.2.3.1.2

A table provides the DHCP bindings information learnt by
the device.

mySNDhcpBindingsEntry row .1.3.6.1.4.1.171.10.97.2.42.1.3.1.1

A row instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status of this instance.

Indexes

mySNDhcpBindingsVlan mySNDhcpBindingsMacAddress mySNDhcpBindingsAddrType

Column	Syntax	OID
mySNDhcpBindingsVlan This object indicates the VLAN to which a DHCP client host belongs.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.97.2.42.1.3.1.1.1
mySNDhcpBindingsMacAddress This object indicates the MAC address of a DHCP client host.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.97.2.42.1.3.1.1.2
mySNDhcpBindingsAddrType This object indicates the type of IP+MAC binding address denoted in mySNDhcpBindingsIpAddress object.	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.171.10.97.2.42.1.3.1.1.3
mySNDhcpBindingsIpAddress This object indicates the allocated IP address of a DHCP client host.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.97.2.42.1.3.1.1.4
mySNDhcpBindingsInterface This object indicates the interface where a DHCP client host connects to.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.10.97.2.42.1.3.1.1.5
mySNDhcpBindingsLeasedTime This object indicates the leased time of this DHCP bindings.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.97.2.42.1.3.1.1.6
mySNDhcpBindingsStatus This object is used to to manage the deletion of rows in this table. This object only supports active(1) and destroy(6) value. Whenever a DHCP binding is learnt by the device, an entry will be created by the device in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.97.2.42.1.3.1.1.7