DES3852P-L2MGMT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
18
Rows
18
Columns
92
swDevInfoPowerTable
table.1.3.6.1.4.1.171.11.69.5.2.1.1.8
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swDevInfoPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swDevInfoPowerTable'
A list of the temperature.
An entry for Power information.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swDevInfoPowerUnitIndexIndicates the ID of the unit in the System | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.1.1.8.1.1 | ||||||||||||||
| swDevInfoPowerIDIndicates ID of the power | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.1.1.8.1.2 | ||||||||||||||
| swDevInfoPowerStatusIndicates status of the power | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.1.1.8.1.3 |
.1.3.6.1.4.1.171.11.69.5.2.3.1
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2VlanAdvertisementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2VlanAdvertisementTable'
A table containing the advertisement state for each VLAN configured into the device by (local or network) management.
Advertisement state for each VLAN configured
in the device.
in the device.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2VlanIndexThe VLAN-ID or other identifier referring to this VLAN. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.69.5.2.3.1.1.1 | ||||||
| swL2VlanNameAn administratively assigned string, which may be used to identify the VLAN. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.69.5.2.3.1.1.2 | ||||||
| swL2VlanAdvertiseStateThis object indicates the advertised status of this VLAN entry. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.3.1.1.3 |
.1.3.6.1.4.1.171.11.69.5.2.4.1
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2PortInfoTable'
A table that contains information about every port.
A list of information for each port of the device.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
swL2PortInfoPortIndexobsolete This object indicates the module's port number.(1..Max portnumber in the module). | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.4.1.1.1 | ||||||||||||||||
swL2PortInfoUnitIndexobsolete Indicates ID of the unit in the device | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.4.1.1.2 | ||||||||||||||||
swL2PortInfoTypeobsolete This object indicates the connector type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.1.1.3 | ||||||||||||||||
swL2PortInfoLinkStatusobsolete This object indicates the port link status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.1.1.4 | ||||||||||||||||
swL2PortInfoNwayStatusobsolete This object indicates the port speed and duplex mode. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.1.1.5 | ||||||||||||||||
swL2PortInfoModuleTypeobsolete This object indicates the module type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.1.1.6 | ||||||||||||||||
swL2PortInfoErrorDisabledobsolete This object indicates the blocking type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.1.1.7 |
.1.3.6.1.4.1.171.11.69.5.2.4.2
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2PortCtrlTable'
A table that contains control information about every port.
A list of control information for each port of the device.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
swL2PortCtrlPortIndexobsolete This object indicates the module's port number.(1..Max portnumber in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.4.2.1.1 | ||||||||||||||||
swL2PortCtrlUnitIndexobsolete Indicates the ID of the unit in the device | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.4.2.1.2 | ||||||||||||||||
swL2PortCtrlAdminStateobsolete This object decides whether the port is enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.2.1.3 | ||||||||||||||||
swL2PortCtrlNwayStateobsolete Choose the port speed, duplex mode, and N-Way function mode. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.2.1.4 | ||||||||||||||||
swL2PortCtrlFlowCtrlStateobsolete The flow control mechanism is different between full duplexmode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.2.1.5 | ||||||||||||||||
swL2PortCtrlLockStateobsolete This object decides whether the port is locked or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.2.1.6 | ||||||||||||||||
swL2PortCtrlMACNotifyStateobsolete This object decides whether MAC notification is enabled or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.2.1.7 |
swL2PortInformationTable
table.1.3.6.1.4.1.171.11.69.5.2.4.4
·
1 row entry
·
8 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortInformationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2PortInformationTable'
A table that contains information about every port.
A list of information for each port of the device.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortInformationPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.4.4.1.1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| swL2PortInformationMediumTypeIndicates medium type of the port number. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.4.1.2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| swL2PortInformationUnitIDIndicates ID of the unit in the system | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.4.4.1.3 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| swL2PortInformationTypeThis object indicates the connector type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.4.1.4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| swL2PortInformationLinkStatusThis object indicates the port link status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.4.1.5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| swL2PortInformationNwayStatusThis object indicates the port speed and duplex mode. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.4.1.6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| swL2PortInformationModuleTypeThis object indicates the module type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.4.1.7 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| swL2PortInformationErrorDisabledThis object indicates the blocking type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.4.1.8 |
swL2PortControlTable
table.1.3.6.1.4.1.171.11.69.5.2.4.5
·
1 row entry
·
9 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2PortControlTable'
A table that contains control information about every port.
A list of control information for each port of the device.
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortControlPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.4.5.1.1 | ||||||||||||||||||||
| swL2PortControlMediumTypeIndicates the medium type of the port number. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.5.1.2 | ||||||||||||||||||||
| swL2PortControlUnitIndexIndicates ID of the unit in the device | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.4.5.1.3 | ||||||||||||||||||||
| swL2PortControlAdminStateThis object decides if the port is enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.5.1.4 | ||||||||||||||||||||
| swL2PortControlNwayStateChoose the port speed, duplex mode, and N-Way function mode. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.5.1.5 | ||||||||||||||||||||
| swL2PortControlFlowCtrlStateThe flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.5.1.6 | ||||||||||||||||||||
| swL2PortControlLearningStateThis object decides whether the port is locked or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.5.1.7 | ||||||||||||||||||||
| swL2PortControlMACNotifyStateThis object sets each port's MAC notification state. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.5.1.8 | ||||||||||||||||||||
| swL2PortControlMulticastfilterThis object controls the multicast port filtering mode for a specified port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.4.5.1.9 |
.1.3.6.1.4.1.171.11.69.5.2.6.1
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOSBandwidthControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2QOSBandwidthControlTable'
.
A list of information contained in swL2QOSBandwidthControlTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOSBandwidthPortIndexIndicates the port. | Integer32 Constraints: range: 1-650 | .1.3.6.1.4.1.171.11.69.5.2.6.1.1.1 |
| swL2QOSBandwidthRxRateIndicates the RX Rate(kbit/sec) of the specifed port. Value 0 means no limit. | Integer32r/w Constraints: range: 0-1000000 | .1.3.6.1.4.1.171.11.69.5.2.6.1.1.2 |
| swL2QOSBandwidthTxRateIndicates the TX Rate(kbit/sec) of the specifed port. Value 0 means no limit. | Integer32r/w Constraints: range: 0-1000000 | .1.3.6.1.4.1.171.11.69.5.2.6.1.1.3 |
| swL2QOSBandwidthRadiusRxRateThe Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.69.5.2.6.1.1.4 |
| swL2QOSBandwidthRadiusTxRateThe Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.69.5.2.6.1.1.5 |
swL2QOSSchedulingTable
table.1.3.6.1.4.1.171.11.69.5.2.6.2
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOSSchedulingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2QOSSchedulingTable'
.
A list of information contained in swL2QOSSchedulingTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOSSchedulingClassIndexIndicates the hardware queue number. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.69.5.2.6.2.1.1 |
| swL2QOSSchedulingMaxPktsIndicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 255 can be specified. | Integer32r/w Constraints: range: 0-15 | .1.3.6.1.4.1.171.11.69.5.2.6.2.1.2 |
.1.3.6.1.4.1.171.11.69.5.2.6.3
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOS8021pUserPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2QOS8021pUserPriorityTable'
.
A list of information contained in swL2QOS8021pUserPriorityTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOS8021pUserPriorityIndexThe 802.1p user priority . | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.69.5.2.6.3.1.1 |
| swL2QOS8021pUserPriorityClassThe number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority). | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.69.5.2.6.3.1.2 |
.1.3.6.1.4.1.171.11.69.5.2.6.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOS8021pDefaultPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2QOS8021pDefaultPriorityTable'
.
A list of information contained in swL2QOS8021pDefaultPriorityTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOS8021pDefaultPriorityIndexIndicates the port number. | Integer32 Constraints: range: 1-650 | .1.3.6.1.4.1.171.11.69.5.2.6.4.1.1 |
| swL2QOS8021pDefaultPriorityThe priority value to assign to untagged packets received by the switch ports on the switch. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.69.5.2.6.4.1.2 |
| swL2QOS8021pRadiusPriorityIndicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.69.5.2.6.4.1.3 |
swL2TrunkCtrlTable
table.1.3.6.1.4.1.171.11.69.5.2.8.3
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2TrunkCtrlTable'
This table specifies which ports are grouped as a set of ports(up to 8) into a single logical link.
A list of information specifies which ports are grouped as a set of
ports(up to 8) into a single logical link.
ports(up to 8) into a single logical link.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2TrunkIndexThe index of logical port trunk. The trunk group number depends on the existence of the unit and module. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.8.3.1.1 | ||||||||||||
| swL2TrunkNameThe name of logical port trunk. | OctetStringr/w Constraints: range: 0-12 | .1.3.6.1.4.1.171.11.69.5.2.8.3.1.2 | ||||||||||||
| swL2TrunkMasterPortThe object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master p… | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.69.5.2.8.3.1.3 | ||||||||||||
| swL2TrunkMemberIndicates how many ports are included in this Trunk. The trunk port number depends on the existence of module. The maximum number of ports is 8 for one trunks. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.69.5.2.8.3.1.4 | ||||||||||||
| swL2TrunkFloodingPortThe object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.69.5.2.8.3.1.5 | ||||||||||||
| swL2TrunkTypeThis object indicates the type of the trunk group. static : is static trunk group lacp : is LACP trunk group . | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.8.3.1.6 | ||||||||||||
| swL2TrunkStateThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.69.5.2.8.3.1.7 |
swL2IGMPCtrlTable
table.1.3.6.1.4.1.171.11.69.5.2.10.3
·
1 row entry
·
12 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2IGMPCtrlTable'
This table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with an index range from 1 to 12.
The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2IGMPCtrlVidThis object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the VID is arranged from 1 to 12, fixed form. If … | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.10.3.1.1 | ||||||
| swL2IGMPQueryIntervalThe frequency at which the IGMP Host-Query packets are transmitted on this switch. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.69.5.2.10.3.1.2 | ||||||
| swL2IGMPMaxResponseTimeThe maximum query response time on this switch. | Integer32r/w Constraints: range: 1-25 | .1.3.6.1.4.1.171.11.69.5.2.10.3.1.3 | ||||||
| swL2IGMPRobustnessThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet los… | Integer32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.69.5.2.10.3.1.4 | ||||||
| swL2IGMPLastMemberQueryIntervalThe Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. | Integer32r/w Constraints: range: 1-25 | .1.3.6.1.4.1.171.11.69.5.2.10.3.1.5 | ||||||
| swL2IGMPHostTimeoutThe timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer has expired. Please referen… | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.69.5.2.10.3.1.6 | ||||||
| swL2IGMPRouteTimeoutThe Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.69.5.2.10.3.1.7 | ||||||
| swL2IGMPLeaveTimerWhen a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left. | Integer32r/w Constraints: range: 0-16711450 | .1.3.6.1.4.1.171.11.69.5.2.10.3.1.8 | ||||||
| swL2IGMPQueryStateThis object decides if the IGMP query is enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.10.3.1.9 | ||||||
| swL2IGMPCurrentStateThis object indicates the current IGMP query state. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.10.3.1.10 | ||||||
| swL2IGMPCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disable(2… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.10.3.1.11 | ||||||
| swL2IGMPFastLeaveStateThis object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following value… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.10.3.1.12 |
swL2IGMPQueryInfoTable
table.1.3.6.1.4.1.171.11.69.5.2.10.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPQueryInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2IGMPQueryInfoTable'
The table contains the current number of IGMP query packets which have been captured by this device, as well as the IGMP query packets sent by the device.
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entires are all enabled.
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entires are all enabled.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPInfoVidThis object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable). | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.10.4.1.1 |
| swL2IGMPInfoQueryCountThis object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.10.4.1.2 |
| swL2IGMPInfoTxQueryCountThis object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increments this object by 1. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.10.4.1.3 |
swL2IGMPInfoTable
table.1.3.6.1.4.1.171.11.69.5.2.10.5
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2IGMPInfoTable'
The table containing current IGMP information which have been captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled. Note that the priority of IGMP table entries is lower than the Filtering Table, i.e. if there is a table hash collision between the entries of the IGMP Table and the Filtering Table inside the switch H/W address table, the Filtering Table entry will overwrite the colliding entry of the IGMP Table. See swL2FilterMgmt description also.
Information about current IGMP information which was captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entries are all enabled.
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entries are all enabled.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPVidThis object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.10.5.1.1 |
| swL2IGMPGroupIpAddrThis object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.69.5.2.10.5.1.2 |
| swL2IGMPMacAddrThis object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.171.11.69.5.2.10.5.1.3 |
| swL2IGMPPortMapThis object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port… | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.69.5.2.10.5.1.4 |
| swL2IGMPIpGroupReportCountThis object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.10.5.1.5 |
.1.3.6.1.4.1.171.11.69.5.2.10.6
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPMulticastVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2IGMPMulticastVlanTable'
The information of the IGMP snooping multicast VLAN table.
The entry of swL2IGMPMulticastVlanTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2IGMPMulticastVlanidThis object indicates the VLAN id of the IGMP snooping multicast VLAN entry. | Integer32 Constraints: range: 2-4094 | .1.3.6.1.4.1.171.11.69.5.2.10.6.1.1 | ||||||||||||
| swL2IGMPMulticastVlanNameThis object indicates the VLAN name of the IGMP snooping multicast VLAN entry. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.69.5.2.10.6.1.2 | ||||||||||||
| swL2IGMPMulticastVlanSourcePortThis object indicates the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports would be f… | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.69.5.2.10.6.1.3 | ||||||||||||
| swL2IGMPMulticastVlanMemberPortThis object indicates the portlist of the member ports of IGMP snooping multicast VLAN. The source ports will be set to untag ports of the vlan entry and the IGMP control messages received from the member ports would be… | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.69.5.2.10.6.1.4 | ||||||||||||
| swL2IGMPMulticastVlanRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.69.5.2.10.6.1.5 |
swL2IGMPRouterPortTable
table.1.3.6.1.4.1.171.11.69.5.2.10.7
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPRouterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2IGMPRouterPortTable'
The information of the router port table.
The entry of swL2IGMPRouterPortTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPRouterPortVlanidThis object indicates the VLAN id of the router port entry. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.69.5.2.10.7.1.1 |
| swL2IGMPRouterPortVlanNameThis object indicates the VLAN name of the router port entry. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.69.5.2.10.7.1.2 |
| swL2IGMPRouterPortStaticPortListThis object indicates the static portlist of the router port entry. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.69.5.2.10.7.1.3 |
| swL2IGMPRouterPortDynamicPortListThis object indicates the dynamic portlist of the router port entry. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.69.5.2.10.7.1.4 |
| swL2IGMPRouterPortForbiddenPortListThis object indicates the forbidden portlist of the router port entry. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.69.5.2.10.7.1.5 |
swL2TrafficSegTable
table.1.3.6.1.4.1.171.11.69.5.2.13.1
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrafficSegTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2TrafficSegTable'
This table specifies that the port can just forward traffic to the specific port list.
A list of information specifying the port with its traffic
forward list.
forward list.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2TrafficSegPortThe port number of the logical port. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.13.1.1.1 |
| swL2TrafficSegForwardPortsThe port list that the specific port can forward traffic to. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.69.5.2.13.1.1.2 |
.1.3.6.1.4.1.171.11.69.5.2.14.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortSecurityControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3852P-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3852P-L2MGMT-MIB::swL2PortSecurityControlTable'
The port security feature controls the address learning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as a static entry. When the learned addresses number reaches N, any incoming packet that has not learned a source address is discarded (e.g. dropped) and no more new addresses can be learned on this port.
A list of information contained in the swL2PortSecurityControlTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortSecurityPortIndexIndicates the secured port to lock address learning. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.69.5.2.14.1.1.1 | ||||||||
| swL2PortSecurityMaxLernAddrIndicates allowable number of addresses to be learned at this port. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.69.5.2.14.1.1.2 | ||||||||
| swL2PortSecurityModeIndicates the mode of locking address. In deleteOnTimeout (3) mode, the locked addresses can be aged out after the aging timer has expired. In this mode, when the locked address has aged … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.14.1.1.3 | ||||||||
| swL2PortSecurityAdmStateIndicates the administration state of the locking address. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.69.5.2.14.1.1.4 |