DES3550-L2MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

143

swL2PortCtrlTable

table obsolete

.1.3.6.1.4.1.171.11.64.2.2.4.2 · 1 row entry · 9 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2PortCtrlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2PortCtrlTable'

A table that contains control information about every port.

swL2PortCtrlEntry row .1.3.6.1.4.1.171.11.64.2.2.4.2.1

A list of control information for each port of the device.

Indexes

swL2PortCtrlPortIndex

Column Syntax OID

swL2PortCtrlPortIndexobsolete

This object indicates the module's port number.(1..Max port
number in the module)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.1

swL2PortCtrlUnitIndexobsolete

Indicates the ID of the unit in the device

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.2

swL2PortCtrlAdminStateobsolete

This object decides whether the port is enabled or disabled.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.3

swL2PortCtrlNwayStateobsolete

Choose the port speed, duplex mode, and N-Way function mode.

Enumerationr/w

Enumerated Values:

1	other
2	nway-enabled
3	nway-disabled-10Mbps-Half
4	nway-disabled-10Mbps-Full
5	nway-disabled-100Mbps-Half
6	nway-disabled-100Mbps-Full
7	nway-disabled-1Gigabps-Half
8	nway-disabled-1Gigabps-Full

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.4

swL2PortCtrlFlowCtrlStateobsolete

The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, IEEE 802.3x flow
control function sends PAUSE frames and…

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.5

swL2PortCtrlLockStateobsolete

This object decides whether the port is locked or not.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.6

swL2PortCtrlMACNotifyStateobsolete

This object decides whether MAC notification is enabled or not.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.7

swL2PortCtrlMulticastfilterobsolete

This object decides the multicast packet filtering mode on this port .

Enumerationr/w

Enumerated Values:

0	other
1	forward-all-groups
2	forward-unregistered-groups
3	filter-unregistered-groups

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.8

swL2PortCtrlMdixStateobsolete

This object decides the MDIX mode on this port.

Enumerationr/w

Enumerated Values:

1	auto
2	normal
3	cross

.1.3.6.1.4.1.171.11.64.2.2.4.2.1.11

swL2PortInformationTable

table

.1.3.6.1.4.1.171.11.64.2.2.4.4 · 1 row entry · 8 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2PortInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2PortInformationTable'

A table that contains information about every port.

swL2PortInformationEntry row .1.3.6.1.4.1.171.11.64.2.2.4.4.1

A list of information for each port of the device.

Indexes

swL2PortInformationPortIndex swL2PortInformationMediumType

Column Syntax OID

swL2PortInformationPortIndex

This object indicates the module's port number.(1..Max port
number in the module)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.4.4.1.1

swL2PortInformationMediumType

Indicates medium type of the port number.

Enumeration

Enumerated Values:

1	copper
2	fiber

.1.3.6.1.4.1.171.11.64.2.2.4.4.1.2

swL2PortInformationUnitID

Indicates ID of the unit in the system

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.4.4.1.3

swL2PortInformationType

This object indicates the connector type of this port.

Enumeration

Enumerated Values:

1	portType-100Base-TX
2	portType-100Base-FX
3	portType-100Base-FL
4	portType-1000Base-TX
5	portType-1000Base-SX
6	portType-1000Base-LX
7	portType-1000Base-SX-GBIC
8	portType-1000Base-LX-GBIC
9	portType-1000Base-TX-GBIC
10	portType-1000Base-1394
11	portType-1000Base-TX-GBIC-COMBO
12	portType-1000Base-none-GBIC
13	portType-1000Base-SX-MGBIC
14	portType-1000Base-LX-MGBIC
15	portType-1000Base-TX-MGBIC
16	portType-1000Base-none-MGBIC
17	portType-SIO
18	portType-10G
19	portType-10G-xenpak-1310nm
20	portType-10G-xenpak-850nm
21	portType-10G-xenpak-empty
22	portType-10G-xfp-1310nm
23	portType-10G-xfp-850nm
24	portType-10G-xfp-empty
25	portType-none

.1.3.6.1.4.1.171.11.64.2.2.4.4.1.4

swL2PortInformationLinkStatus

This object indicates the port link status.

Enumeration

Enumerated Values:

1	other
2	link-pass
3	link-fail

.1.3.6.1.4.1.171.11.64.2.2.4.4.1.5

swL2PortInformationNwayStatus

This object indicates the port speed and duplex mode.

Enumeration

Enumerated Values:

0	other
1	empty
2	link-down
3	half-10Mbps
4	full-10Mbps
5	half-100Mbps
6	full-100Mbps
7	half-1Gigabps
8	full-1Gigabps
9	full-10Gigabps

.1.3.6.1.4.1.171.11.64.2.2.4.4.1.6

swL2PortInformationModuleType

This object indicates the module type of this port.

Enumeration

Enumerated Values:

0	none
1	moduleType-COMBO
2	moduleType-1394
3	moduleType-1000T
4	moduleType-MGBIC
5	moduleType-1P-SC-SX
6	moduleType-2P-SC-SX
7	moduleType-1P-SC-LX
8	moduleType-2P-SC-LX
9	moduleType-1P-TX
10	moduleType-2P-TX
11	moduleType-1P-MTRJ-SX
12	moduleType-2P-MTRJ-SX
13	moduleType-1P-MTRJ-LX
14	moduleType-2P-MTRJ-LX
15	moduleType-1P-GBIC
16	moduleType-2P-GBIC
17	moduleType-1P-GBIC-1P-TX
18	moduleType-1P-GBIC-1P-STACK
19	moduleType-2P-STACK
20	moduleType-2P-100FX
21	moduleType-1P-100FX
22	moduleType-2P-100FX-NEW
23	moduleType-1P-100FL
24	moduleType-2P-100FL
25	moduleType-2P-100TX
26	moduleType-BaseModule-24PORT

.1.3.6.1.4.1.171.11.64.2.2.4.4.1.7

swL2PortInformationErrorDisabled

This object indicates the blocking type of this port.

Enumeration

Enumerated Values:

0	none
1	storm
2	lbd
3	unknow

.1.3.6.1.4.1.171.11.64.2.2.4.4.1.8

swL2PortControlTable

table

.1.3.6.1.4.1.171.11.64.2.2.4.5 · 1 row entry · 10 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2PortControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2PortControlTable'

A table that contains control information about every port.

swL2PortControlEntry row .1.3.6.1.4.1.171.11.64.2.2.4.5.1

A list of control information for each port of the device.

Indexes

swL2PortControlPortIndex swL2PortControlMediumType

Column Syntax OID

swL2PortControlPortIndex

This object indicates the module's port number.(1..Max port
number in the module)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.1

swL2PortControlMediumType

Indicates the medium type of the port number.

Enumeration

Enumerated Values:

1	copper
2	fiber

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.2

swL2PortControlUnitIndex

Indicates ID of the unit in the device

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.3

swL2PortControlAdminState

This object decides if the port is enabled or disabled.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.4

swL2PortControlNwayState

Choose the port speed, duplex mode, and N-Way function mode.

Enumerationr/w

Enumerated Values:

1	other
2	nway-enabled
3	nway-disabled-10Mbps-Half
4	nway-disabled-10Mbps-Full
5	nway-disabled-100Mbps-Half
6	nway-disabled-100Mbps-Full
7	nway-disabled-1Gigabps-Half
8	nway-disabled-1Gigabps-Full
9	nway-disabled-1Gigabps-Full-master
10	nway-disabled-1Gigabps-Full-slave

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.5

swL2PortControlFlowCtrlState

The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, the IEEE 802.3x flow
control function sends PAUSE frames…

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.6

swL2PortControlLockStateobsolete

This object decides whether the port is locked or not.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.7

swL2PortControlMACNotifyState

This object sets each port's MAC notification state.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.8

swL2PortControlMulticastfilter

This object controls the multicast port filtering mode for a specified port.

Enumerationr/w

Enumerated Values:

0	other
1	forward-all-groups
2	forward-unregistered-groups
3	filter-unregistered-groups

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.9

swL2PortControlMdixState

This object decides the MDIX mode on this port.

Enumerationr/w

Enumerated Values:

1	auto
2	normal
3	cross

.1.3.6.1.4.1.171.11.64.2.2.4.5.1.11

swL2MulticastRangeTable

table

.1.3.6.1.4.1.171.11.64.2.2.5.1 · 1 row entry · 4 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2MulticastRangeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2MulticastRangeTable'

swL2MulticastRangeEntry row .1.3.6.1.4.1.171.11.64.2.2.5.1.1

A list of information contained in swL2MulticastRangeTable.

Indexes

swL2MulticastRangeName

Column Syntax OID

swL2MulticastRangeName

This object specifies the multicast range name.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.171.11.64.2.2.5.1.1.1

swL2MulticastRangeFromIp

This object specifies the start IP address for this range.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.5.1.1.2

swL2MulticastRangeToIp

This object specifies the end IP address for this range.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.5.1.1.3

swL2MulticastRangeRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.171.11.64.2.2.5.1.1.4

swL2LimitedMulticastStatusTable

table

.1.3.6.1.4.1.171.11.64.2.2.5.2.1 · 1 row entry · 3 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2LimitedMulticastStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2LimitedMulticastStatusTable'

swL2LimitedMulticastStatusEntry row .1.3.6.1.4.1.171.11.64.2.2.5.2.1.1

A list of information contained in swL2LimitedMulticastStatusTable.

Indexes

swL2LimitedMulticastPort

Column Syntax OID

swL2LimitedMulticastPort

This object indicates the port.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.1

swL2LimitedMulticastAccess

This object indicates the access type.

Enumerationr/w

Enumerated Values:

1	none
2	permit
3	deny

.1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.2

swL2LimitedMulticastState

This object indicates the state for this port.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.3

swL2LimitedMulticastRangeTable

table

.1.3.6.1.4.1.171.11.64.2.2.5.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2LimitedMulticastRangeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2LimitedMulticastRangeTable'

swL2LimitedMulticastRangeEntry row .1.3.6.1.4.1.171.11.64.2.2.5.2.2.1

A list of information contained in swL2LimitedMulticastRangeTable.

Indexes

swL2LimitedMulticastPort swL2LimitedMulticastID

Column Syntax OID

swL2LimitedMulticastID

This object indicates the range ID.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.1

swL2LimitedMulticastRangeName

RFC1213-MIBDisplayStringr/w

.1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.2

swL2LimitedMulticastFromIp

This object specifies the start IP address of the
range on this port.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.3

swL2LimitedMulticastToIp

This object specifies the end IP address of the
range on this port.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.4

swL2LimitedMulticastRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.5

swL2QOSBandwidthControlTable

table

.1.3.6.1.4.1.171.11.64.2.2.6.1 · 1 row entry · 5 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2QOSBandwidthControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2QOSBandwidthControlTable'

swL2QOSBandwidthControlEntry row .1.3.6.1.4.1.171.11.64.2.2.6.1.1

A list of information contained in swL2QOSBandwidthControlTable.

Indexes

swL2QOSBandwidthPortIndex

Column	Syntax	OID
swL2QOSBandwidthPortIndex Indicates the port.	Integer32 Constraints: `range: 1-650`	`.1.3.6.1.4.1.171.11.64.2.2.6.1.1.1`
swL2QOSBandwidthRxRate Indicates the RX Rate(Mbit/sec) of the specifed port. Value 0 means no limit.	Integer32r/w Constraints: `range: 0-1000`	`.1.3.6.1.4.1.171.11.64.2.2.6.1.1.2`
swL2QOSBandwidthTxRate Indicates the TX Rate(Mbit/sec) of the specifed port. Value 0 means no limit.	Integer32r/w Constraints: `range: 0-1000`	`.1.3.6.1.4.1.171.11.64.2.2.6.1.1.3`
swL2QOSBandwidthRadiusRxRate The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.11.64.2.2.6.1.1.4`
swL2QOSBandwidthRadiusTxRate The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.11.64.2.2.6.1.1.5`

swL2QOSSchedulingTable

table

.1.3.6.1.4.1.171.11.64.2.2.6.2 · 1 row entry · 3 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2QOSSchedulingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2QOSSchedulingTable'

swL2QOSSchedulingEntry row .1.3.6.1.4.1.171.11.64.2.2.6.2.1

A list of information contained in swL2QOSSchedulingTable.

Indexes

swL2QOSSchedulingClassIndex

Column	Syntax	OID
swL2QOSSchedulingClassIndex Indicates the hardware queue number.	Integer32 Constraints: `range: 0-3`	`.1.3.6.1.4.1.171.11.64.2.2.6.2.1.1`
swL2QOSSchedulingMaxPkts Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 255 can be specified.	Integer32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.171.11.64.2.2.6.2.1.2`
swL2QOSSchedulingMaxLatency Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin transmitting its packets. A value between 0 and 255 can be spe…	Integer32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.171.11.64.2.2.6.2.1.3`

swL2QOS8021pUserPriorityTable

table

.1.3.6.1.4.1.171.11.64.2.2.6.3 · 1 row entry · 2 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2QOS8021pUserPriorityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2QOS8021pUserPriorityTable'

swL2QOS8021pUserPriorityEntry row .1.3.6.1.4.1.171.11.64.2.2.6.3.1

A list of information contained in swL2QOS8021pUserPriorityTable.

Indexes

swL2QOS8021pUserPriorityIndex

Column	Syntax	OID
swL2QOS8021pUserPriorityIndex The 802.1p user priority .	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.11.64.2.2.6.3.1.1`
swL2QOS8021pUserPriorityClass The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority).	Integer32r/w Constraints: `range: 0-3`	`.1.3.6.1.4.1.171.11.64.2.2.6.3.1.2`

swL2QOS8021pDefaultPriorityTable

table

.1.3.6.1.4.1.171.11.64.2.2.6.4 · 1 row entry · 3 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2QOS8021pDefaultPriorityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2QOS8021pDefaultPriorityTable'

swL2QOS8021pDefaultPriorityEntry row .1.3.6.1.4.1.171.11.64.2.2.6.4.1

A list of information contained in swL2QOS8021pDefaultPriorityTable.

Indexes

swL2QOS8021pDefaultPriorityIndex

Column	Syntax	OID
swL2QOS8021pDefaultPriorityIndex Indicates the port number.	Integer32 Constraints: `range: 1-650`	`.1.3.6.1.4.1.171.11.64.2.2.6.4.1.1`
swL2QOS8021pDefaultPriority The priority value to assign to untagged packets received by the switch ports on the switch.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.11.64.2.2.6.4.1.2`
swL2QOS8021pRadiusPriority Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.11.64.2.2.6.4.1.3`

swL2IpMacBindingPortTable

table

.1.3.6.1.4.1.171.11.64.2.2.7.1 · 1 row entry · 6 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IpMacBindingPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IpMacBindingPortTable'

The table specifies the port's ip-mac binding function.

swL2IpMacBindingPortEntry row .1.3.6.1.4.1.171.11.64.2.2.7.1.1

A list of information about the port's ip-mac binding function.

Indexes

swL2IpMacBindingPortIndex

Column Syntax OID

swL2IpMacBindingPortIndex

This object indicates the module's port number.(1..Max port
number in the module).

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.7.1.1.1

swL2IpMacBindingPortState

This object enables (strict or loose mode)/disables IP-MAC binding
on the specified port.

Note:
enable-strict (2): SW learning
enable-loose (4) : HW learning

Enumerationr/w

Enumerated Values:

1	other
2	enable-strict
3	disable
4	enable-loose

.1.3.6.1.4.1.171.11.64.2.2.7.1.1.2

swL2IpMacBindingPortAllowZeroIp

This object enables/disables the allow zero IP status on the specified port.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.171.11.64.2.2.7.1.1.3

swL2IpMacBindingPortForwardDhcpPkt

This object can be set to forward or not forward DHCP packets on the specified port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.11.64.2.2.7.1.1.4

swL2IpMacBindingPortDHCPSnoopMaxEntry

This object indicates the max entry created by DHCP packets on the
specified port.
Note:
When 0 is set on the specified port, the max entry created by DHCP packets
is no limit

Integer32r/w

Constraints:
range: 0-10

.1.3.6.1.4.1.171.11.64.2.2.7.1.1.5

swL2IpMacBindingPortDHCPSnoopEntryClearAction

When set to start(2), the address binding entries learned
for the specified ports will be cleared.
When get, it always returns other (1).

Enumerationr/w

Enumerated Values:

1	other
2	start

.1.3.6.1.4.1.171.11.64.2.2.7.1.1.6

swL2IpMacBindingTable

table

.1.3.6.1.4.1.171.11.64.2.2.7.2 · 1 row entry · 6 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IpMacBindingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IpMacBindingTable'

This table specifies IP-MAC binding information.

swL2IpMacBindingEntry row .1.3.6.1.4.1.171.11.64.2.2.7.2.1

IP-MAC binding entry used to add\delete\configure the address
pair to the switch's authorized user database.

Indexes

swL2IpMacBindingIpIndex

Column Syntax OID

swL2IpMacBindingIpIndex

The IP address of the IP-MAC binding.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.7.2.1.1

swL2IpMacBindingMac

The MAC address of the IP-MAC binding.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.171.11.64.2.2.7.2.1.2

swL2IpMacBindingStatus

The status of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.171.11.64.2.2.7.2.1.3

swL2IpMacBindingPorts

The port members of this entry.

PortListr/w

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.64.2.2.7.2.1.4

swL2IpMacBindingAction

The action of this entry.

Enumeration

Enumerated Values:

0	inactive
1	active

.1.3.6.1.4.1.171.11.64.2.2.7.2.1.5

swL2IpMacBindingMode

The mode of this entry.
arp: This entry is specified as an ARP mode entry, and this
entry will not be added as an access entry. If this
object is not specified, the mode defaults to ARP mode.
If…

Enumerationr/w

Enumerated Values:

0	arp
1	acl
2	auto

.1.3.6.1.4.1.171.11.64.2.2.7.2.1.6

swL2IpMacBindingBlockedTable

table

.1.3.6.1.4.1.171.11.64.2.2.7.3 · 1 row entry · 5 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IpMacBindingBlockedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IpMacBindingBlockedTable'

The table specifies information of MAC addresses which were blocked.

swL2IpMacBindingBlockedEntry row .1.3.6.1.4.1.171.11.64.2.2.7.3.1

The entry can not create/configure. It can only delete.

Indexes

swL2IpMacBindingBlockedVID swL2IpMacBindingBlockedMac

Column Syntax OID

swL2IpMacBindingBlockedVID

The object specifies the VLAN ID.

VlanIndex

.1.3.6.1.4.1.171.11.64.2.2.7.3.1.1

swL2IpMacBindingBlockedMac

The MAC address which was blocked.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.171.11.64.2.2.7.3.1.2

swL2IpMacBindingBlockedVlanName

This object specifies the VLAN name.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.171.11.64.2.2.7.3.1.3

swL2IpMacBindingBlockedPort

The port with which the MAC is associated.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.7.3.1.4

swL2IpMacBindingBlockedType

The value is always blockByAddrBind. This entry will be deleted by setting the value to delete(3).

Enumerationr/w

Enumerated Values:

1	other
2	blockByAddrBind
3	delete

.1.3.6.1.4.1.171.11.64.2.2.7.3.1.5

swL2IpMacBindingDHCPSnoopTable

table

.1.3.6.1.4.1.171.11.64.2.2.7.9 · 1 row entry · 5 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IpMacBindingDHCPSnoopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IpMacBindingDHCPSnoopTable'

The table specifies information regarding the DHCP snooping
function learning IP-MAC binding entries.

swL2IpMacBindingDHCPSnoopEntry row .1.3.6.1.4.1.171.11.64.2.2.7.9.1

A list of information about the DHCP snooping learning
IP-MAC binding entry.

Indexes

swL2IpMacBindingDHCPSnoopIpIndex

Column Syntax OID

swL2IpMacBindingDHCPSnoopIpIndex

The IP address of this entry.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.7.9.1.1

swL2IpMacBindingDHCPSnoopMac

The MAC address of this entry.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.171.11.64.2.2.7.9.1.2

swL2IpMacBindingDHCPSnoopLeaseTime

Specifies the lease time of this entry.
When the lease time expires, this entry will be removed from
this port.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.11.64.2.2.7.9.1.3

swL2IpMacBindingDHCPSnoopPort

Specifies the port of this entry.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.11.64.2.2.7.9.1.4

swL2IpMacBindingDHCPSnoopStatus

Specifies the status (inactive or active) of this entry.

Enumeration

Enumerated Values:

1	inactive
2	active

.1.3.6.1.4.1.171.11.64.2.2.7.9.1.5

swL2IpMacBindingPermitIPPoolTable

table

.1.3.6.1.4.1.171.11.64.2.2.7.10 · 1 row entry · 4 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IpMacBindingPermitIPPoolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IpMacBindingPermitIPPoolTable'

This table specifies the permitted IP pool of IP-MAC binding.

swL2IpMacBindingPermitIPPoolEntry row .1.3.6.1.4.1.171.11.64.2.2.7.10.1

A list of information of each permitted IP pool entry.

Indexes

swL2IpMacBindingPermitIPPoolStartIP swL2IpMacBindingPermitIPPoolEndIP

Column Syntax OID

swL2IpMacBindingPermitIPPoolStartIP

The start IP address of the permitted IP pool.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.7.10.1.1

swL2IpMacBindingPermitIPPoolEndIP

The end IP address of the permitted IP pool.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.7.10.1.2

swL2IpMacBindingPermitIPPoolPorts

The port members of the permitted IP pool.

PortListr/w

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.64.2.2.7.10.1.3

swL2IpMacBindingPermitIPPoolStatus

The status of the permitted IP pool.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.171.11.64.2.2.7.10.1.4

swL2TrunkCtrlTable

table

.1.3.6.1.4.1.171.11.64.2.2.8.3 · 1 row entry · 7 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2TrunkCtrlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2TrunkCtrlTable'

This table specifies which ports are grouped as a set of ports(up to 8)
into a single logical link.

swL2TrunkCtrlEntry row .1.3.6.1.4.1.171.11.64.2.2.8.3.1

A list of information specifies which ports are grouped as a set of
ports(up to 8) into a single logical link.

Indexes

swL2TrunkIndex

Column Syntax OID

swL2TrunkIndex

The index of logical port trunk. The trunk group number depends
on the existence of the unit and module.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.8.3.1.1

swL2TrunkName

The name of logical port trunk.

OctetStringr/w

Constraints:
range: 0-12

.1.3.6.1.4.1.171.11.64.2.2.8.3.1.2

swL2TrunkMasterPort

The object indicates the master port number of the port trunk
entry. When using Port Trunk, you can not configure the other
ports of the group except the master port.
Their configuration must be the same as the master p…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.64.2.2.8.3.1.3

swL2TrunkMember

Indicates how many ports are included in this Trunk.
The trunk port number depends on the existence of module.
The maximum number of ports is 8 for one trunks.

PortListr/w

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.64.2.2.8.3.1.4

swL2TrunkFloodingPort

The object indicates the flooding port number of the port trunk
entry. The first port of the trunk is implicitly configured to
be the flooding port.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.64.2.2.8.3.1.5

swL2TrunkType

This object indicates the type of the trunk group.
static : is static trunk group
lacp : is LACP trunk group .

Enumerationr/w

Enumerated Values:

1	other
2	static
3	lacp

.1.3.6.1.4.1.171.11.64.2.2.8.3.1.6

swL2TrunkState

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.171.11.64.2.2.8.3.1.7

swL2IGMPCtrlTable

table

.1.3.6.1.4.1.171.11.64.2.2.10.3 · 1 row entry · 11 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IGMPCtrlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IGMPCtrlTable'

This table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled
mode, there is only one entry in the table, with index 1. If
VLAN is in Port-Base or 802.1q mode, the number of entries can
be up to 12, with an index range from 1 to 12.

swL2IGMPCtrlEntry row .1.3.6.1.4.1.171.11.64.2.2.10.3.1

The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.

Indexes

swL2IGMPCtrlVid

Column Syntax OID

swL2IGMPCtrlVid

This object indicates the IGMP control entry's VLAN ID. If VLAN
is disabled, the VID is always 0 and cannot be changed by
management users. If VLAN is in Port-Base mode, the VID is
arranged from 1 to 12, fixed form. If …

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.1

swL2IGMPQueryInterval

The frequency at which the IGMP Host-Query packets are
transmitted on this switch.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.2

swL2IGMPMaxResponseTime

The maximum query response time on this switch.

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.3

swL2IGMPRobustness

The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to have a high
loss, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet los…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.4

swL2IGMPLastMemberQueryInterval

The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.5

swL2IGMPHostTimeout

The timer value for sending IGMP query packet when none was
sent by the host in the LAN. The timer works in per-VLAN basis.
Our device will be activated to send the query message if the
timer has expired. Please referen…

Integer32r/w

Constraints:
range: 1-16711450

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.6

swL2IGMPRouteTimeout

The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages.

Integer32r/w

Constraints:
range: 1-16711450

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.7

swL2IGMPLeaveTimer

When a query receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left.

Integer32r/w

Constraints:
range: 0-16711450

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.8

swL2IGMPQueryState

This object decides if the IGMP query is enabled or disabled.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.9

swL2IGMPCurrentState

This object indicates the current IGMP query state.

Enumeration

Enumerated Values:

1	other
2	querier
3	non-querier

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.10

swL2IGMPCtrlState

This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions under
which it will remain so are different for each of the following
values.
disable(2…

Enumerationr/w

Enumerated Values:

1	other
2	disable
3	enable

.1.3.6.1.4.1.171.11.64.2.2.10.3.1.11

swL2IGMPQueryInfoTable

table

.1.3.6.1.4.1.171.11.64.2.2.10.4 · 1 row entry · 3 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IGMPQueryInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IGMPQueryInfoTable'

The table contains the current number of IGMP query packets which
have been captured by this device, as well as the IGMP query packets
sent by the device.

swL2IGMPQueryInfoEntry row .1.3.6.1.4.1.171.11.64.2.2.10.4.1

Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entires are all enabled.

Indexes

swL2IGMPInfoVid

Column	Syntax	OID
swL2IGMPInfoVid This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable).	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.64.2.2.10.4.1.1`
swL2IGMPInfoQueryCount This object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.64.2.2.10.4.1.2`
swL2IGMPInfoTxQueryCount This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increments this object by 1.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.64.2.2.10.4.1.3`

swL2IGMPInfoTable

table

.1.3.6.1.4.1.171.11.64.2.2.10.5 · 1 row entry · 5 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IGMPInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IGMPInfoTable'

The table containing current IGMP information which have been captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entries are all enabled. Note
that the priority of IGMP table entries is lower than the Filtering
Table, i.e. if there is a table hash collision between the
entries of the IGMP Table and the Filtering Table inside the switch H/W
address table, the Filtering Table entry will overwrite the
colliding entry of the IGMP Table. See swL2FilterMgmt description
also.

swL2IGMPInfoEntry row .1.3.6.1.4.1.171.11.64.2.2.10.5.1

Information about current IGMP information which was captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entries are all enabled.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr

Column	Syntax	OID
swL2IGMPVid This object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.64.2.2.10.5.1.1`
swL2IGMPGroupIpAddr This object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.171.11.64.2.2.10.5.1.2`
swL2IGMPMacAddr This object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.171.11.64.2.2.10.5.1.3`
swL2IGMPPortMap This object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port…	PortList Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.64.2.2.10.5.1.4`
swL2IGMPIpGroupReportCount This object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.64.2.2.10.5.1.5`

swL2IGMPMulticastVlanTable

table

.1.3.6.1.4.1.171.11.64.2.2.10.6 · 1 row entry · 6 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IGMPMulticastVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IGMPMulticastVlanTable'

The information of the IGMP snooping multicast VLAN table.

swL2IGMPMulticastVlanEntry row .1.3.6.1.4.1.171.11.64.2.2.10.6.1

The entry of swL2IGMPMulticastVlanTable.

Indexes

swL2IGMPMulticastVlanid

Column Syntax OID

swL2IGMPMulticastVlanid

This object indicates the VLAN id of the IGMP snooping multicast
VLAN entry.

Integer32

Constraints:
range: 2-4094

.1.3.6.1.4.1.171.11.64.2.2.10.6.1.1

swL2IGMPMulticastVlanName

This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.11.64.2.2.10.6.1.2

swL2IGMPMulticastVlanSourcePort

This object indicates the portlist of the source ports of IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports would be f…

PortListr/w

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.64.2.2.10.6.1.3

swL2IGMPMulticastVlanMemberPort

This object indicates the portlist of the member ports of IGMP
snooping multicast VLAN. The source ports will be set to untag ports
of the vlan entry and the IGMP control messages received from the
member ports would be…

PortListr/w

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.64.2.2.10.6.1.4

swL2IGMPMulticastVlanRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.171.11.64.2.2.10.6.1.5

swL2IGMPMulticastVlanReplaceSourceIP

This object is used to replace the source IP address in the IP header for
IGMP control packets.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.10.6.1.6

swL2IGMPRouterPortTable

table

.1.3.6.1.4.1.171.11.64.2.2.10.7 · 1 row entry · 5 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2IGMPRouterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2IGMPRouterPortTable'

The information of the router port table.

swL2IGMPRouterPortEntry row .1.3.6.1.4.1.171.11.64.2.2.10.7.1

The entry of swL2IGMPRouterPortTable.

Indexes

swL2IGMPRouterPortVlanid

Column	Syntax	OID
swL2IGMPRouterPortVlanid This object indicates the VLAN id of the router port entry.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.171.11.64.2.2.10.7.1.1`
swL2IGMPRouterPortVlanName This object indicates the VLAN name of the router port entry.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.11.64.2.2.10.7.1.2`
swL2IGMPRouterPortStaticPortList This object indicates the static portlist of the router port entry.	PortListr/w Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.64.2.2.10.7.1.3`
swL2IGMPRouterPortDynamicPortList This object indicates the dynamic portlist of the router port entry.	PortList Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.64.2.2.10.7.1.4`
swL2IGMPRouterPortForbiddenPortList This object indicates the forbidden portlist of the router port entry.	PortListr/w Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.64.2.2.10.7.1.5`

swL2DhcpRelayCtrlTable

table obsolete

.1.3.6.1.4.1.171.11.64.2.2.11.7 · 1 row entry · 3 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2DhcpRelayCtrlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2DhcpRelayCtrlTable'

This table specifies the IP address og the  destination to forward
(relay) DHCP packets to.

swL2DhcpRelayCtrlEntry row .1.3.6.1.4.1.171.11.64.2.2.11.7.1

A list of information specifying the IP address as a destination
to forward (relay) DHCP packets to.

Indexes

swL2DhcpRelayCtrlInterfaceName swL2DhcpRelayCtrlServer

Column Syntax OID

swL2DhcpRelayCtrlInterfaceNameobsolete

The name of the IP interface.

OctetString

Constraints:
range: 1-12

.1.3.6.1.4.1.171.11.64.2.2.11.7.1.1

swL2DhcpRelayCtrlServerobsolete

The DHCP server IP address.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.171.11.64.2.2.11.7.1.2

swL2DhcpRelayCtrlStateobsolete

This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…

Enumerationr/w

Enumerated Values:

1	other
2	invalid
3	valid

.1.3.6.1.4.1.171.11.64.2.2.11.7.1.3

swL2LoopDetectPortTable

table

.1.3.6.1.4.1.171.11.64.2.2.12.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2LoopDetectPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2LoopDetectPortTable'

The table specifies the loopback detection function specified by the port.

swL2LoopDetectPortEntry row .1.3.6.1.4.1.171.11.64.2.2.12.2.1.1

The table specifies the loopback detection function specified by the port.

Indexes

swL2LoopDetectPortIndex

Column Syntax OID

swL2LoopDetectPortIndex

This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.1

swL2LoopDetectPortState

This object indicates the loopback detection function state on the port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.2

swL2LoopDetectPortLoopVLAN

This object indicates the VLAN list that has detected a loopback.

RFC1213-MIBDisplayString

.1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.3

swL2LoopDetectPortLoopStatus

This object indicates the port status.

Enumeration

Enumerated Values:

1	normal
2	loop
3	error

.1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.4

swL2TrafficSegTable

table

.1.3.6.1.4.1.171.11.64.2.2.13.1 · 1 row entry · 2 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2TrafficSegTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2TrafficSegTable'

This table specifies that the port can just forward traffic to the
specific port list.

swL2TrafficSegEntry row .1.3.6.1.4.1.171.11.64.2.2.13.1.1

A list of information specifying the port with its traffic
forward list.

Indexes

swL2TrafficSegPort

Column	Syntax	OID
swL2TrafficSegPort The port number of the logical port.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.64.2.2.13.1.1.1`
swL2TrafficSegForwardPorts The port list that the specific port can forward traffic to.	PortListr/w Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.64.2.2.13.1.1.2`

swL2PortSecurityControlTable

table

.1.3.6.1.4.1.171.11.64.2.2.14.1 · 1 row entry · 4 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2PortSecurityControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2PortSecurityControlTable'

port security feature which controls the address learning capability and the
traffic forwarding decision. Each port can have this function enabled or disabled.
When it is enabled and a number is given said N, which allows N addresses to be
learned at this port, the first N learned addresses are locked at this port as
static entry. When the learned addresses number reaches N, any incoming packet that
has not learned a source addresses is discarded (e.g. dropped) and no more new addresses
can be learned on this port.

swL2PortSecurityControlEntry row .1.3.6.1.4.1.171.11.64.2.2.14.1.1

A list of information contained in swL2PortSecurityControlTable.

Indexes

swL2PortSecurityPortIndex

Column Syntax OID

swL2PortSecurityPortIndex

Indicates the secured port to lock address learning.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.171.11.64.2.2.14.1.1.1

swL2PortSecurityMaxLernAddr

Indicates allowable number of addresses to be learned at this port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.64.2.2.14.1.1.2

swL2PortSecurityMode

Indicates the mode of locking address.
In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer
has expired. In this mode, when the locked address has aged
…

Enumerationr/w

Enumerated Values:

1	other
2	permanent
3	deleteOnTimeout
4	deleteOnReset

.1.3.6.1.4.1.171.11.64.2.2.14.1.1.3

swL2PortSecurityAdmState

Indicates the administration state of the locking address.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.171.11.64.2.2.14.1.1.4

swL2DhcpLocalRelayVLANTable

table

.1.3.6.1.4.1.171.11.64.2.2.24.2 · 1 row entry · 2 columns

Open in standard view

Uses the d-link variant from /opt/observium/mibs/d-link.

Command help

Walk swL2DhcpLocalRelayVLANTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3550-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3550-L2MGMT-MIB::swL2DhcpLocalRelayVLANTable'

This table is used to manage the DHCP local relay status
for each VLAN.

swL2DhcpLocalRelayVLANEntry row .1.3.6.1.4.1.171.11.64.2.2.24.2.1

This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.

Indexes

swL2DhcpLocalRelayVLANID

Column Syntax OID

swL2DhcpLocalRelayVLANID

This object shows the VIDs of the current VLANS in the switch.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.11.64.2.2.24.2.1.1

swL2DhcpLocalRelayVLANState

This object indicates the status of the DHCP relay function
of the VLAN.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.64.2.2.24.2.1.2

DES3550-L2MGMT-MIB Table View

swDevInfoPowerTable

swL2VlanAdvertisementTable

swL2PortInfoTable

swL2PortCtrlTable

swL2PortInformationTable

swL2PortControlTable

swL2MulticastRangeTable

swL2LimitedMulticastStatusTable

swL2LimitedMulticastRangeTable

swL2QOSBandwidthControlTable

swL2QOSSchedulingTable

swL2QOS8021pUserPriorityTable

swL2QOS8021pDefaultPriorityTable

swL2IpMacBindingPortTable

swL2IpMacBindingTable

swL2IpMacBindingBlockedTable

swL2IpMacBindingDHCPSnoopTable

swL2IpMacBindingPermitIPPoolTable

swL2TrunkCtrlTable

swL2IGMPCtrlTable

swL2IGMPQueryInfoTable

swL2IGMPInfoTable

swL2IGMPMulticastVlanTable

swL2IGMPRouterPortTable

swL2DhcpRelayCtrlTable

swL2LoopDetectPortTable

swL2TrafficSegTable

swL2PortSecurityControlTable

swL2DhcpLocalRelayVLANTable