DES3225G-MIB Table View

A table that contains information about every module.

swModuleInfoEntry row .1.3.6.1.4.1.171.11.24.2.1.1

A list of information for each module of the device.

Indexes

swModuleInfoIndex

Column	Syntax	OID
swModuleInfoIndexmandatory This object indicates switch module number.(1..swDevInfoMaxNumOfModule)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.2.1.1.1
swModuleInfoDescmandatory A textual description of the module for memorization .	RFC1213-MIBDisplayString	.1.3.6.1.4.1.171.11.24.2.1.1.2
swModuleInfoTypemandatory This object indicates the type of this module.	Enumeration Enumerated Values: 1 other 2 baseModule-UTP 3 optionModule-2PortFiber-MTRJ 4 optionModule-2PortTX-UTP 5 optionModule-1PortFiber-SC 6 optionModule-1000Base-SX 7 optionModule-1000Base-LX	.1.3.6.1.4.1.171.11.24.2.1.1.3
swModuleInfoTotalNumOfPortmandatory The number of ports within this module. This value is the sum of the ports within this module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.2.1.1.4
swModuleInfoNumOfPortInUsemandatory The number of ports in this module connected to the segment or the end stations.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.2.1.1.5
swModuleInfoPortLedStatusmandatory This object is a set of module's port LED indications. Every two bytes are presented to a port. Except the module 3 (Gigabit module) ,the first byte is presentd to the Link/Activity LED. The second byte is presented to…	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.171.11.24.2.1.1.6

A table that contains information about every port.

swPortInfoEntry row .1.3.6.1.4.1.171.11.24.3.1.1

A list of information for each port of the device.

Indexes

swPortInfoModuleIndex swPortInfoPortIndex

Column	Syntax	OID
swPortInfoModuleIndexmandatory This object indicates switch module number.(1..Max module number)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.3.1.1.1
swPortInfoPortIndexmandatory This object indicates the module's port number.(1..Max port number in the module)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.3.1.1.2
swPortInfoTypemandatory This object indicates the connector type of this port.	Enumeration Enumerated Values: 1 other 2 portType-UTP 3 portType-AUI 4 portType-Fiber-MTRJ 5 portType-Fiber-SC 6 portType-BNC	.1.3.6.1.4.1.171.11.24.3.1.1.3
swPortInfoLinkStatusmandatory This object indicates the port link status.	Enumeration Enumerated Values: 1 other 2 link-pass 3 link-fail	.1.3.6.1.4.1.171.11.24.3.1.1.4
swPortInfoNwayStatusmandatory This object indicates the port speed and duplex mode.	Enumeration Enumerated Values: 1 other 2 half-10Mbps 3 full-10Mbps 4 half-100Mbps 5 full-100Mbps 6 half-1Gigabps 7 full-1Gigabps	.1.3.6.1.4.1.171.11.24.3.1.1.5
swPortInfoFlowCtrlStatusmandatory This object indicates the port flow control status.	Enumeration Enumerated Values: 1 other 2 flowctrl-disabled 3 flowctrl-enabled 4 backpressure-disabled 5 backpressure-enabled	.1.3.6.1.4.1.171.11.24.3.1.1.6

A table that contains control information about every port.

swPortCtrlEntry row .1.3.6.1.4.1.171.11.24.3.2.1

A list of control information for each port of the device.

Indexes

swPortCtrlModuleIndex swPortCtrlPortIndex

Column	Syntax	OID
swPortCtrlModuleIndexmandatory This object indicates the device module number.(1..Max module number)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.3.2.1.1
swPortCtrlPortIndexmandatory This object indicates the module's port number.(1..Max port number in the module)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.3.2.1.2
swPortCtrlAdminStatemandatory This object decide the port enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.24.3.2.1.3
swPortCtrlLinkStatusAlarmStatemandatory Depending on this object to determine to send a trap or not when link status changes .	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.24.3.2.1.4
swPortCtrlNwayStatemandatory Chose the port speed, duplex mode, and N-Way function mode.	Enumerationr/w Enumerated Values: 1 other 2 nway-enabled 3 nway-disabled-10Mbps-Half 4 nway-disabled-10Mbps-Full 5 nway-disabled-100Mbps-Half 6 nway-disabled-100Mbps-Full 7 nway-disabled-1Gigabps-Half 8 nway-disabled-1Gigabps-Full	.1.3.6.1.4.1.171.11.24.3.2.1.5
swPortCtrlFlowCtrlStatemandatory Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work only when the port is in full duplex mode.If the port is set Auto-negotiation enabled, the ob…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.24.3.2.1.6
swPortCtrlBackPressStatemandatory Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.24.3.2.1.7
swPortCtrlLockStatemandatory The state of this entry. When the swDevCtrlTableLockState object is enabled, the state is not changed. When swVlanInfoStatus is in MAC-Base VLAN mode, this object is always disabled.The meanings of the values are: …	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.24.3.2.1.8
swPortCtrlPrioritymandatory The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destination address. IGMP and BPDU packets are always routed with high priority; packets with unkno…	Enumerationr/w Enumerated Values: 1 other 2 default 3 force-low-priority 4 force-high-priority	.1.3.6.1.4.1.171.11.24.3.2.1.9
swPortCtrlStpStatemandatory The state of STP(spanning tree algorithm) operation on this port. That's meaning the port whether add in the STP. The value enabled(3) indicates that STP is enabled on this port, as long as swDevCtrlStpState is also e…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.24.3.2.1.10
swPortCtrlHOLStatemandatory The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea relies on the assumption that it is better to discard packets de…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.24.3.2.1.11
swPortCtrlBroadcastRisingThrmandatory This allows the user to specify the broadcast packets per second. Broadcast traffic above this rate activates broadcast storm control (i.e. swPortCtrlBroadcastRisingAct) on the port. The default value is 500 broadcast p…	Integer32r/w Constraints: range: 1-1488000	.1.3.6.1.4.1.171.11.24.3.2.1.12
swPortCtrlBroadcastFallingThrmandatory This allows the user to specify the broadcast packets per second. If broadcast traffic is below this rate and rising threshold condition has been met at least once before this falling threshold is met, the device will …	Integer32r/w Constraints: range: 1-1488000	.1.3.6.1.4.1.171.11.24.3.2.1.13
swPortCtrlBroadcastRisingActmandatory This object indicates the system action when broadcast storm rising threshold is met. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the followi…	Enumerationr/w Enumerated Values: 1 other 2 do-nothing 3 blocking 4 blocking-trap	.1.3.6.1.4.1.171.11.24.3.2.1.14
swPortCtrlBroadcastFallingActmandatory This object indicates the device action when broadcast storm falling threshold is met. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the follo…	Enumerationr/w Enumerated Values: 1 other 2 do-nothing 3 forwarding 4 forwarding-trap	.1.3.6.1.4.1.171.11.24.3.2.1.15
swPortCtrlCleanAllStatisticCountermandatory Setting this object will reset current device's all statistic counters.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.3.2.1.16

A list of port statistic Counter entries.

swPortStEntry row .1.3.6.1.4.1.171.11.24.3.3.1

This entry include all the port statistic Counter which support
by the device, like Bytes received, Bytes Sent ...

Indexes

swPortStModuleIndex swPortStPortIndex

Column	Syntax	OID
swPortStModuleIndexmandatory This object indicates the device module number.(1..Max module number)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.3.3.1.1
swPortStPortIndexmandatory This object indicates the module's port number.(1..Max port number in the module)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.3.3.1.2
swPortStByteRxmandatory swDevCtrlCounterMode = 2(switched-frames):This counter is incre- mented once for every data octet of good packets(unicast + multi- cast + broadcast) received. swDevCtrlCounterMode = 3(all-frames):This co…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.3
swPortStByteTxmandatory This counter is incremented once for every data octet of a trans- mitted good packet.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.4
swPortStFrameRxmandatory swDevCtrlCounterMode = 2(switched-frames):This counter is incre- mented once for every good packet(unicast + multicast + broadcast ) received. swDevCtrlCounterMode = 3(all-frames):This counter is increme…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.5
swPortStFrameTxmandatory This counter is incremented once for every transmitted good packet.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.6
swPortStTotalBytesRxmandatory This counter is incremented once for every data octet of all received packets. This include data octets of rejected and local packets which are not forwarded to the switching core for trans- mission. This counter shoul…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.7
swPortStTotalFramesRxmandatory This counter is incremented once for every received packets. This include rejected and local packets which are not forwarded to the switching core for transmission. This counter should reflect all packets received on th…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.8
swPortStBroadcastFramesRxmandatory swDevCtrlCounterMode = 2(switched-frames):This counter is incre- mented once for every good broadcast packet received. swDevCtrlCounterMode = 3(all-frames):This counter is incremented once for every good…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.9
swPortStMulticastFramesRxmandatory swDevCtrlCounterMode = 2(switched-frames):This counter is incre- mented once for every good multicast packet received. swDevCtrlCounterMode = 3(all-frames):This counter is incremented once for every good…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.10
swPortStCRCErrormandatory This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is between 64 and 1518 bytes inclusive. 2.Packet has invalid CRC. 3.Collision event , late collis…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.11
swPortStOversizeFramesmandatory The number of good frames with length more than 1518 bytes.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.12
swPortStFragmentsmandatory This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is less than 64 bytes or packet withourt SFD and is less than 64 bytes in length. 2.Packet has …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.13
swPortStJabbermandatory The number of frames with length more than 1518 bytes and with CRC error or misaligned.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.14
swPortStCollisionmandatory The number of Collisions	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.15
swPortStLateCollisionmandatory The number of Late Collision(collision occurring later than 576th transmitted bit).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.16
swPortStFrames-64-bytesmandatory This counter is incremented once for every received and trans- mitted packet with size of 64 bytes. This counter includes reject- ed received and transmitted packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.17
swPortStFrames-65-127-bytesmandatory This counter is incremented once for every received and trans- mitted packet with size of 65 to 127 bytes. This counter includes rejected received and transmitted packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.18
swPortStFrames-128-255-bytesmandatory This counter is incremented once for every received and trans- mitted packet with size of 128 to 255 bytes. This counter includes rejected received and transmitted packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.19
swPortStFrames-256-511-bytesmandatory This counter is incremented once for every received and trans- mitted packet with size of 256 to 511 bytes. This counter includes rejected received and transmitted packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.20
swPortStFrames-512-1023-bytesmandatory This counter is incremented once for every received and trans- mitted packet with size of 512 to 1023 bytes. This counter includ- es rejected received and transmitted packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.21
swPortStFrames-1024-1536-bytesmandatory This counter is incremented once for every received and trans- mitted packet with size of 1024 to 1536 bytes. This counter includ- es rejected received and transmitted packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.22
swPortStFramesDroppedFramesmandatory This counter is incremented once for every received dropped pack- et.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.23
swPortStMulticastFramesTxmandatory The number of multicast frames sent. This counter does not include broadcast packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.24
swPortStBroadcastFramesTxmandatory The number of broadcast frames sent.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.25
swPortStUndersizeFramesmandatory This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is less than 64 bytes. 2.Packet has valid CRC. 3.Collision event , late collision event and recei…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.24.3.3.1.26

Like typical legacy bridge devices, FDB table records the mapping
of Source MAC Address and its associated source port, and forward
incoming packets to its destination port according to the Destination
MAC Address of the packet as well as the MAC-port pair entries of the
FDB table. Note that the priority of FDB table entries is lower than
Filtering Table, i.e. if there is a table hash collision between the
entries of FDB Table and Filtering Table inside the switch H/W address
table, then Filtering Table entry overwrite the colliding entry of
FDB Table. See swFdbFilterTable description also.

swFdbStaticEntry row .1.3.6.1.4.1.171.11.24.4.1.1

A list of information specifies which ports the frames with specific
destination MAC address to go.

Indexes

swFdbStaticVid swFdbStaticAddressIndex

Column	Syntax	OID
swFdbStaticVidmandatory This object indicates the VLAN-ID. If VLAN is in mac-based mode or disabled, the object indicates the default VLAN-ID (0).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.4.1.1.1
swFdbStaticAddressIndexmandatory The destination MAC address in a frame to which this entry's forwarding information applies. This object can take the value of an unicast address or the multicast address.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.24.4.1.1.2
swFdbStaticPortMapmandatory The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the …	OctetStringr/w Constraints: range: 1-4	.1.3.6.1.4.1.171.11.24.4.1.1.3
swFdbStaticStatemandatory This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.171.11.24.4.1.1.4
swFdbStaticStatusmandatory This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. apply(2)…	Enumeration Enumerated Values: 1 other 2 apply 3 not-apply	.1.3.6.1.4.1.171.11.24.4.1.1.5

A table which contains the filtering information of the
unicast/multicast entries. This table is used by the transparent
switching function in determining how to filter the received frames.
The Filtering Table entries' priority overrides Static FDB Table
as well as IGMP table entries, say, if there is a hash table entry
collision between Filtering Table and Static FDB Table setting in
the switch device's H/W address table, then Filter Table entry setting
overwrites the colliding entry in Static FDB Table. See swFdbStaticTable
description also.

swFdbFilterEntry row .1.3.6.1.4.1.171.11.24.4.2.1

A list of information about a specific unicast/multicast MAC address
for which the switch has filtering information.

Indexes

swFdbFilterVid swFdbFilterAddressIndex

Column	Syntax	OID
swFdbFilterVidmandatory This object indicates the VLAN-ID. If VLAN is in mac-based mode or disabled, the object indicates the default VLAN-ID (0).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.24.4.2.1.1
swFdbFilterAddressIndexmandatory This object indicates a unicast/multicast MAC address for which the bridge has filtering information.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.24.4.2.1.2
swFdbFilterStatemandatory This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. dst-src…	Enumerationr/w Enumerated Values: 1 other 2 dst-src-addr 3 invalid	.1.3.6.1.4.1.171.11.24.4.2.1.3