DES3200-52P-L2MGMT-MIB Table View

This table contains the module information.

swDevModuleInfoEntry row .1.3.6.1.4.1.171.11.113.10.1.2.1.1.3.1

A list of management information for each unit in the system.

Indexes

swDevModuleInfoUnitID

Column	Syntax	OID
swDevModuleInfoUnitID This object indicates the specific unit ID in the stacking/chassis table.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.171.11.113.10.1.2.1.1.3.1.1
swDevModuleInfoModuleName A text string containing the name of the module.	OctetString Constraints: range: 0-12	.1.3.6.1.4.1.171.11.113.10.1.2.1.1.3.1.3
swDevModuleInfoReversion A text string containing the version (name or number) of the module.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.171.11.113.10.1.2.1.1.3.1.4
swDevModuleInfoSerial A text string containing the serial number or serial name of the module.	OctetString Constraints: range: 0-9	.1.3.6.1.4.1.171.11.113.10.1.2.1.1.3.1.5
swDevModuleInfoDescription A text string containing a description of the module.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.171.11.113.10.1.2.1.1.3.1.6

A table containing the CFM state of specified ports.

swL2DevCtrlCFMPortEntry row .1.3.6.1.4.1.171.11.113.10.1.2.1.2.21.2.1

The entry of the CFM state on specified ports.

Indexes

swL2DevCtrlCFMPortIndex

Column	Syntax	OID
swL2DevCtrlCFMPortIndex This object indicates the port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.1.2.21.2.1.1
swL2DevCtrlCFMPortState This object indicates the CFM state by port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.1.2.21.2.1.2

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset.

swL2VlanStaticEntry row .1.3.6.1.4.1.171.11.113.10.1.2.2.1.1

Static information for a VLAN configured into this
device by (local or network) management.

Indexes

swL2VlanIndex

Column	Syntax	OID
swL2VlanIndex The VLAN-ID or other identifier referring to this VLAN.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.11.113.10.1.2.2.1.1.1
swL2VLANAdvertisement This object indicates if the advertisement is active or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.2.1.1.2

A table containing the VLAN and port role information of each port.

swL2VlanPortInfoEntry row .1.3.6.1.4.1.171.11.113.10.1.2.2.3.1

The table entry of VLAN port information.

Indexes

swL2VlanPortInfoPortIndex swL2VlanPortInfoVid

Column	Syntax	OID
swL2VlanPortInfoPortIndex The port index.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.2.3.1.1
swL2VlanPortInfoVid The VLAN ID assigned to a special port	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.11.113.10.1.2.2.3.1.2
swL2VlanPortInfoPortRole The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN.	Enumeration Enumerated Values: 1 other 2 untagged 3 tagged 4 dynamic 5 forbidden	.1.3.6.1.4.1.171.11.113.10.1.2.2.3.1.3

A table containing the subnet VLAN information.

swL2SubnetVLANEntry row .1.3.6.1.4.1.171.11.113.10.1.2.2.4.1

The entry of subnet VLAN information.

Indexes

swL2SubnetVLANIPAddress swL2SubnetVLANIPMask

Column	Syntax	OID
swL2SubnetVLANIPAddress This object indicates the IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.2.4.1.1
swL2SubnetVLANIPMask This object indicates the IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.2.4.1.2
swL2SubnetVLANID This object indicates the VLAN ID.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.11.113.10.1.2.2.4.1.3
swL2SubnetVLANPriority This object indicates the priority.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.171.11.113.10.1.2.2.4.1.4
swL2SubnetVLANRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.113.10.1.2.2.4.1.5

A table containing the VLAN classification precedence information of each port.

swL2VlanPrecedenceEntry row .1.3.6.1.4.1.171.11.113.10.1.2.2.5.1

The entry of VLAN classification precedence information.

Indexes

swL2VlanPrecedencePortIndex

Column	Syntax	OID
swL2VlanPrecedencePortIndex This object indicates the port index.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.2.5.1.1
swL2VlanPrecedenceClassification This object indicates the VLAN classification precedence.	Enumerationr/w Enumerated Values: 1 mac-based 2 subnet-based	.1.3.6.1.4.1.171.11.113.10.1.2.2.5.1.2

A table that contains information about every port.

swL2PortInfoEntry row .1.3.6.1.4.1.171.11.113.10.1.2.3.1.1

A list of information for each port of the device.

Indexes

swL2PortInfoPortIndex swL2PortInfoMediumType

Column	Syntax	OID
swL2PortInfoPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.1.1.1
swL2PortInfoMediumType Indicates the medium type of the port number.	Enumeration Enumerated Values: 1 copper 2 fiber	.1.3.6.1.4.1.171.11.113.10.1.2.3.1.1.2
swL2PortInfoUnitID Indicates the ID of the unit in the system.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.1.1.3
swL2PortInfoType This object indicates the connector type of this port.	Enumeration Enumerated Values: 1 portType-100Base-TX 2 portType-100Base-FX 3 portType-100Base-FL 4 portType-1000Base-TX 5 portType-1000Base-SX 6 portType-1000Base-LX 7 portType-1000Base-SX-GBIC 8 portType-1000Base-LX-GBIC 9 portType-1000Base-TX-GBIC 10 portType-1000Base-1394 11 portType-1000Base-TX-GBIC-COMBO 12 portType-1000Base-none-GBIC 13 portType-1000Base-SX-MGBIC 14 portType-1000Base-LX-MGBIC 15 portType-1000Base-TX-MGBIC 16 portType-1000Base-none-MGBIC 17 portType-SIO 18 portType-10G 19 portType-10G-xenpak-1310nm 20 portType-10G-xenpak-850nm 21 portType-10G-xenpak-empty 22 portType-10G-xfp-1310nm 23 portType-10G-xfp-850nm 24 portType-10G-xfp-empty 25 portType-none	.1.3.6.1.4.1.171.11.113.10.1.2.3.1.1.4
swL2PortInfoLinkStatus This object indicates the port link status.	Enumeration Enumerated Values: 1 other 2 link-pass 3 link-fail	.1.3.6.1.4.1.171.11.113.10.1.2.3.1.1.5
swL2PortInfoNwayStatus This object indicates the port speed and duplex mode.	Enumeration Enumerated Values: 0 other 1 empty 2 link-down 3 half-10Mbps 4 full-10Mbps 5 half-100Mbps 6 full-100Mbps 7 half-1Gigabps 8 full-1Gigabps 9 full-10Gigabps	.1.3.6.1.4.1.171.11.113.10.1.2.3.1.1.6
swL2PortInfoModuleType This object indicates the module type of this port.	Enumeration Enumerated Values: 0 none 1 moduleType-COMBO 2 moduleType-1394 3 moduleType-1000T 4 moduleType-MGBIC 5 moduleType-1P-SC-SX 6 moduleType-2P-SC-SX 7 moduleType-1P-SC-LX 8 moduleType-2P-SC-LX 9 moduleType-1P-TX 10 moduleType-2P-TX 11 moduleType-1P-MTRJ-SX 12 moduleType-2P-MTRJ-SX 13 moduleType-1P-MTRJ-LX 14 moduleType-2P-MTRJ-LX 15 moduleType-1P-GBIC 16 moduleType-2P-GBIC 17 moduleType-1P-GBIC-1P-TX 18 moduleType-1P-GBIC-1P-STACK 19 moduleType-2P-STACK 20 moduleType-2P-100FX 21 moduleType-1P-100FX 22 moduleType-2P-100FX-NEW 23 moduleType-1P-100FL 24 moduleType-2P-100FL 25 moduleType-2P-100TX 26 moduleType-BaseModule-24PORT	.1.3.6.1.4.1.171.11.113.10.1.2.3.1.1.7
swL2PortInfoErrorDisabled This object indicates the blocking type of this port.	Enumeration Enumerated Values: 0 none 1 storm 2 stp-lbd 3 unknow 4 ctp-lbd	.1.3.6.1.4.1.171.11.113.10.1.2.3.1.1.8

A table that contains control information about every port.

swL2PortCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.3.2.1

A list of control information for each port on the device.

Indexes

swL2PortCtrlPortIndex swL2PortCtrlMediumType

Column	Syntax	OID
swL2PortCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.1
swL2PortCtrlMediumType Indicates the medium type of the port number.	Enumeration Enumerated Values: 1 copper 2 fiber	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.2
swL2PortCtrlUnitIndex Indicates the ID of the unit in the device	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.3
swL2PortCtrlAdminState This object decides if the port is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.4
swL2PortCtrlNwayState Chose the port speed, duplex mode, and N-Way function mode.	Enumerationr/w Enumerated Values: 1 other 2 nway-enabled 3 nway-disabled-10Mbps-Half 4 nway-disabled-10Mbps-Full 5 nway-disabled-100Mbps-Half 6 nway-disabled-100Mbps-Full 7 nway-disabled-1Gigabps-Half 8 nway-disabled-1Gigabps-Full 9 nway-disabled-1Gigabps-Full-master 10 nway-disabled-1Gigabps-Full-slave	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.5
swL2PortCtrlFlowCtrlState The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE fram…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.6
swL2PortCtrlLearningState This object decides if the port is locked or not.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.7
swL2PortCtrlMACNotifyState This object sets each port's MAC notification state.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.8
swL2PortCtrlMDIXState This object configures the MDIX setting of the port.	Enumerationr/w Enumerated Values: 1 auto 2 normal 3 cross	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.10
swL2PortCtrlAutoNegRestart If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of…	Enumerationr/w Enumerated Values: 1 restart 2 norestart	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.11
swL2PortCtrlAutoNegCapAdvertisedBits A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegInfoCapabilityBits cannot …	IANAifMauAutoNegCapBitsr/w Type Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD	.1.3.6.1.4.1.171.11.113.10.1.2.3.2.1.12

A table that contains cable diagnostic information about every port.

swL2PortCableDiagnosisEntry row .1.3.6.1.4.1.171.11.113.10.1.2.3.5.1

A list with cable diagnostic information for each port of the device.

Indexes

swL2PortCableDiagnosisPortIndex swL2PortCableDiagnosisPairIndex

Column	Syntax	OID
swL2PortCableDiagnosisPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.5.1.1
swL2PortCableDiagnosisPairIndex Indicates the pair index of each port. Pair 1 means pin 3 and 6 of the connector. Pair 2 means pin 1 and 2 of the connector. Pair 3 means pin 7 and 8 of the connector. Pair 4 means pin 4 and 5 of the conn…	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.171.11.113.10.1.2.3.5.1.2
swL2PortCableDiagnosisCableStatus This object indicates the cable status.	Enumeration Enumerated Values: 0 ok 1 open 2 short 3 open-short 4 not-support 5 unknown	.1.3.6.1.4.1.171.11.113.10.1.2.3.5.1.3
swL2PortCableDiagnosisPairStatus This object indicates the status of the pair.	Enumeration Enumerated Values: 0 ok 1 open 2 short 3 fail 4 not-supported 5 unknown	.1.3.6.1.4.1.171.11.113.10.1.2.3.5.1.4
swL2PortCableDiagnosisPairLength This object indicates the approx. length or length to failure of the pair. The unit value is in meters.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.3.5.1.5
swL2PortCableDiagnosisPairLengthInaccuracy This object indicates the inaccuracy of a pair length. The unit value is in meters.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.3.5.1.6

A table that is used to clear counter information about every port.

swL2PortCounterCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.3.6.1

A list of entries used to clear the counter information for each port of the device.

Indexes

swL2PortCounterCtrlPortIndex

Column	Syntax	OID
swL2PortCounterCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.6.1.1
swL2PortCounterClearCtrl This object indicates whether to clear the counters for each port of the device or not.	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.11.113.10.1.2.3.6.1.2

A table that contains error information for each port.

swL2PortErrEntry row .1.3.6.1.4.1.171.11.113.10.1.2.3.7.1

A list of information regarding port errors on the device.

Indexes

swL2PortErrPortIndex

Column	Syntax	OID
swL2PortErrPortIndex This object indicates the module's port number.(1..Max port number in the module).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.7.1.1
swL2PortErrPortState This object indicates if the port state is enabled or disabled.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.3.7.1.2
swL2PortErrPortConnStatus This object indicates whether the Port Status is err-disabled or not.	Enumeration Enumerated Values: 1 other 2 err-disabled	.1.3.6.1.4.1.171.11.113.10.1.2.3.7.1.3
swL2PortErrPortReason This object describes if the reason for the port error is STP LBD or Storm control.	Enumeration Enumerated Values: 1 stp-lbd 2 storm-control 3 ctp-lbd	.1.3.6.1.4.1.171.11.113.10.1.2.3.7.1.4

A table that contains information about every port's auto negotiation status.

swL2PortAutoNegInfoEntry row .1.3.6.1.4.1.171.11.113.10.1.2.3.8.1

A list of information for each port auto negotiation of the device.

Indexes

swL2PortAutoNegInfoPortIndex

Column	Syntax	OID
swL2PortAutoNegInfoPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.8.1.1
swL2PortAutoNegInfoAdminStatus If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. The status is affect by setting swL2PortCtrlNwayState.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.3.8.1.2
swL2PortAutoNegInfoCapabilityBits A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. …	IANAifMauAutoNegCapBits Type Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD	.1.3.6.1.4.1.171.11.113.10.1.2.3.8.1.3
swL2PortAutoNegInfoCapAdvertisedBits A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegCapabilityBits cannot be en…	IANAifMauAutoNegCapBits Type Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD	.1.3.6.1.4.1.171.11.113.10.1.2.3.8.1.4
swL2PortAutoNegInfoCapReceivedBits A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entiti…	IANAifMauAutoNegCapBits Type Values: 0 bOther 1 b10baseT 2 b10baseTFD 3 b100baseT4 4 b100baseTX 5 b100baseTXFD 6 b100baseT2 7 b100baseT2FD 8 bFdxPause 9 bFdxAPause 10 bFdxSPause 11 bFdxBPause 12 b1000baseX 13 b1000baseXFD 14 b1000baseT 15 b1000baseTFD	.1.3.6.1.4.1.171.11.113.10.1.2.3.8.1.5

A table that contains information for each port drop counter.

swL2PortDropCounterEntry row .1.3.6.1.4.1.171.11.113.10.1.2.3.9.1

A list of information for each port auto negotiation of the device.

Indexes

swL2PortDropCounterPortIndex

Column	Syntax	OID
swL2PortDropCounterPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.3.9.1.1
swL2PortBufferFullDrops The total number of packets discarded while buffer full.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.3.9.1.2
swL2PortACLDrops The total number of packets denied by ACLs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.3.9.1.3
swL2PortMulticastDrops The total number of multicast packet that is discarded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.3.9.1.4
swL2PortVLANIngressDrops The total number of packets discarded by VLAN ingress checking.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.3.9.1.5

A table that contains information for each port's jumbo frame information.

swL2PortJumboFrameCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.3.10.1

A list of information for each port's jumbo frame of the device.

Indexes

swL2PortJumboFrameCtrlPortIndex

Column	Syntax	OID
swL2PortJumboFrameCtrlPortIndex This object indicates the module's port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.3.10.1.1
swL2PortJumboFrameCtrlState This object indicates the jumbo frame state on a specified port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.3.10.1.2

A table that contains the Differentiated Service (DiffServ) type information of each port.

swL2DiffServTypeCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.4.1.1

A list of DiffServ type information for each port of the device.

Indexes

swL2DiffServTypeCtrlPortIndex

Column	Syntax	OID
swL2DiffServTypeCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.113.10.1.2.4.1.1.1
swL2DiffServTypeCtrlDiffServType The DiffServ type of this port. disabled (1) --- no DiffServ and ToS field modification ability. DSCP (2) --- indicates if the associated port's DSCP control information is in the swL2DiffServDS…	Enumerationr/w Enumerated Values: 1 disabled 2 dscp 3 tos	.1.3.6.1.4.1.171.11.113.10.1.2.4.1.1.2

A table that contains DSCP (Differentiated Service Code Point) control
information.

swL2DiffServDSCPCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.4.2.1

A list of DSCP control information for each port.

Indexes

swL2DiffServDSCPCtrlPortIndex

Column	Syntax	OID
swL2DiffServDSCPCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.113.10.1.2.4.2.1.1
swL2DiffServDSCPCtrlMode The DSCP mode of this port. dscp-Force-Overwrite(1) --- The DSCP field for the IP packet is replaced by the specific value regardless of the DSCP of the incoming packet. dscp-Change-If-Zero(…	Enumerationr/w Enumerated Values: 1 dscp-Force-Overwrite 2 dscp-Change-If-Zero	.1.3.6.1.4.1.171.11.113.10.1.2.4.2.1.2
swL2DiffServDSCPCtrlValue The DSCP value of this port.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.171.11.113.10.1.2.4.2.1.3

A table that contains ToS (Type of Service) control
information.

swL2DiffServTOSCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.4.3.1

A list of ToS control information for each port.

Indexes

swL2DiffServTOSCtrlPortIndex

Column	Syntax	OID
swL2DiffServTOSCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.113.10.1.2.4.3.1.1
swL2DiffServTOSCtrlMode The ToS mode of this port. tos-Force-Overwrite(1) --- The IP ToS precedence has changed to the specific value. tos-TOS-Overwrite-802dot1p(2) --- If the incoming packet is an IPv4 packet, change the 802.1p …	Enumerationr/w Enumerated Values: 1 tos-Force-Overwrite 2 tos-TOS-Overwrite-802dot1p 3 tos-802dot1p-Overwrite-TOS	.1.3.6.1.4.1.171.11.113.10.1.2.4.3.1.2
swL2DiffServTOSCtrlValue This object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1)	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.171.11.113.10.1.2.4.3.1.3

A table that contains information about multicast filter profile.

swL2MulticastFilterProfileEntry row .1.3.6.1.4.1.171.11.113.10.1.2.5.1.1

A list of information for each multicast filter profile.

Indexes

swL2MulticastFilterProfileIndex

Column	Syntax	OID
swL2MulticastFilterProfileIndex Indicates index for each profile.	Integer32 Constraints: range: 1-24	.1.3.6.1.4.1.171.11.113.10.1.2.5.1.1.1
swL2MulticastFilterProfileName Specifies a profile name for each multicast filter profile.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.171.11.113.10.1.2.5.1.1.2
swL2MulticastFilterStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.113.10.1.2.5.1.1.3

A table that contains information about multicast filter address.

swL2MulticastFilterProfileAddressEntry row .1.3.6.1.4.1.171.11.113.10.1.2.5.2.1

A list of information for each multicast filter address.

Indexes

swL2MulticastFilterProfileIdIndex swL2MulticastFilterFromIp swL2MulticastFilterToIp

Column	Syntax	OID
swL2MulticastFilterProfileIdIndex Indicates index for each profile.	Integer32 Constraints: range: 1-24	.1.3.6.1.4.1.171.11.113.10.1.2.5.2.1.1
swL2MulticastFilterFromIp Specifies the head IP address of a multicast address range which will be binded to a multicast filter profile.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.5.2.1.2
swL2MulticastFilterToIp Specifies the tail IP address of a multicast address range which will be binded to a multicast filter profile.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.5.2.1.3
swL2MulticastFilterAddressState This object indicates the status of this entry. Setting value to createAndGo (4) will add the multicast address list specified in swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile. Setti…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.113.10.1.2.5.2.1.4

A table that is used to bind the port to the profile ID.

swL2LimitedMulticastFilterPortEntry row .1.3.6.1.4.1.171.11.113.10.1.2.5.3.1

A list of information that is used to bind the port to the profile ID.

Indexes

swL2LimitedMulticastFilterPortIndex

Column	Syntax	OID
swL2LimitedMulticastFilterPortIndex Specifies the port as an index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.5.3.1.1
swL2LimitedMulticastFilterPortAccess This object indicates the access status for each port.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.171.11.113.10.1.2.5.3.1.2
swL2LimitedMulticastFilterPortProfileID This object specifies a profile ID list for each port.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.113.10.1.2.5.3.1.3
swL2LimitedMulticastFilterPortProfileStatus Controls the multicast filter profile list which binds to each port. When set to add (2), the multicast filter profile ID list which is specified in swL2LimitedMulticastFilterPortProfileID will be bound to the port. Whe…	Enumerationr/w Enumerated Values: 1 other 2 add 3 delete	.1.3.6.1.4.1.171.11.113.10.1.2.5.3.1.4

A table that contains information about max group numbers based on each port.

swL2MulticastFilterPortMaxGroupEntry row .1.3.6.1.4.1.171.11.113.10.1.2.5.4.1

A list of max group number information for each port.

Indexes

swL2MulticastFilterPortMaxGroupPortIndex

Column	Syntax	OID
swL2MulticastFilterPortMaxGroupPortIndex Specifies the port number as a table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.5.4.1.1
swL2MulticastFilterPortMaxGroup Specifies maximum multicast filter group numbers for each port. The default value is 256.	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.171.11.113.10.1.2.5.4.1.2

A table that is used to bind the VID to the profile ID.

swL2LimitedMulticastFilterVIDEntry row .1.3.6.1.4.1.171.11.113.10.1.2.5.5.1

A list of information that is used to bind the VID to the profile ID.

Indexes

swL2LimitedMulticastFilterVIDIndex

Column	Syntax	OID
swL2LimitedMulticastFilterVIDIndex Specifies the VID as an index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.5.5.1.1
swL2LimitedMulticastFilterVIDAccess This object indicates the access status for each VID.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.171.11.113.10.1.2.5.5.1.2
swL2LimitedMulticastFilterVIDProfileID This object specifies a profile ID list for each VID.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.113.10.1.2.5.5.1.3
swL2LimitedMulticastFilterVIDProfileStatus Controls the multicast filter profile list which binds to each VID. When set to add (2), the multicast filter profile ID list which is specified in swL2LimitedMulticastFilterVIDProfileID will be bound to the VID. When s…	Enumerationr/w Enumerated Values: 1 other 2 add 3 delete	.1.3.6.1.4.1.171.11.113.10.1.2.5.5.1.4

A table that contains information about max group numbers based on VID.

swL2MulticastFilterVIDMaxGroupEntry row .1.3.6.1.4.1.171.11.113.10.1.2.5.6.1

A list of max group number information for each VID.

Indexes

swL2MulticastFilterVIDMaxGroupVIDIndex

Column	Syntax	OID
swL2MulticastFilterVIDMaxGroupVIDIndex Specifies the VID number as a table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.5.6.1.1
swL2MulticastFilterVIDMaxGroup Specifies maximum multicast filter group numbers for each VID. The default value is 256.	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.171.11.113.10.1.2.5.6.1.2

.

swL2QOSBandwidthControlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.6.1.1

A list of information contained in the swL2QOSBandwidthControlTable.

Indexes

swL2QOSBandwidthPortIndex

Column	Syntax	OID
swL2QOSBandwidthPortIndex Indicates the port.	Integer32 Constraints: range: 1-768	.1.3.6.1.4.1.171.11.113.10.1.2.6.1.1.1
swL2QOSBandwidthRxRate Indicates RX Rate (Mbit/sec) of the specified port. A value of 10000 means no limit.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.171.11.113.10.1.2.6.1.1.2
swL2QOSBandwidthTxRate Indicates TX Rate(Mbit/sec) of the specified port. A value of 10000 means no limit.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.171.11.113.10.1.2.6.1.1.3
swL2QOSBandwidthRadiusRxRate The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.6.1.1.4
swL2QOSBandwidthRadiusTxRate The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.6.1.1.5

.

swL2QOSSchedulingEntry row .1.3.6.1.4.1.171.11.113.10.1.2.6.2.1

A list of information contained in the swL2QOSSchedulingTable.

Indexes

swL2QOSSchedulingClassIndex

Column	Syntax	OID
swL2QOSSchedulingClassIndex Indicates the hardware queue number.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.171.11.113.10.1.2.6.2.1.1
swL2QOSSchedulingMaxPkts Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.171.11.113.10.1.2.6.2.1.2
swL2QOSSchedulingMechanism Indicates the mechanism of QoS scheduling.	Enumeration Enumerated Values: 1 strict 2 roundrobin 3 weightfair	.1.3.6.1.4.1.171.11.113.10.1.2.6.2.1.3
swL2QOSSchedulingMaxLatency Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin transmitting its packets. A value between 0 and 255 can be spe…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.11.113.10.1.2.6.2.1.4

.

swL2QOS8021pUserPriorityEntry row .1.3.6.1.4.1.171.11.113.10.1.2.6.3.1

A list of information contained in the swL2QOS8021pUserPriorityTable.

Indexes

swL2QOS8021pUserPriorityIndex

Column	Syntax	OID
swL2QOS8021pUserPriorityIndex The 802.1p user priority.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.171.11.113.10.1.2.6.3.1.1
swL2QOS8021pUserPriorityClass The number of the switch's hardware priority queue. The switch has seven hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).	Integer32r/w Constraints: range: 0-6	.1.3.6.1.4.1.171.11.113.10.1.2.6.3.1.2

.

swL2QOS8021pDefaultPriorityEntry row .1.3.6.1.4.1.171.11.113.10.1.2.6.4.1

A list of information contained in the swL2QOS8021pDefaultPriorityTable.

Indexes

swL2QOS8021pDefaultPriorityIndex

Column	Syntax	OID
swL2QOS8021pDefaultPriorityIndex Indicates the port number.	Integer32 Constraints: range: 1-768	.1.3.6.1.4.1.171.11.113.10.1.2.6.4.1.1
swL2QOS8021pDefaultPriority The priority value assigned to untagged packets received by the ports on the switch.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.171.11.113.10.1.2.6.4.1.2
swL2QOS8021pRadiusPriority Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.6.4.1.3

A port security feature which controls the address learning capability and      
traffic forwarding decisions. Each port can be enabled or disabled for this function.
When it is enabled and a number is given, e.g N this will allow N addresses to be
learned on this port, the first N address learned will be locked at this port as
static entries. When the learned addresses number reaches N, any incoming packet 
without learned source addresses are discarded (e.g. dropped) and no more new 
addresses can be learned on this port.

swL2PortSecurityControlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.7.1.1

A list of information contained in the swL2PortSecurityControlTable.

Indexes

swL2PortSecurityPortIndex

Column	Syntax	OID
swL2PortSecurityPortIndex Indicates the secured port to lock address learning.	Integer32 Constraints: range: 1-768	.1.3.6.1.4.1.171.11.113.10.1.2.7.1.1.1
swL2PortSecurityMaxLernAddr Indicates allowable number of addresses that can be learned on this port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.7.1.1.2
swL2PortSecurityMode Indicates the locking address mode. In deleteOnTimeout (3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address has aged out, the number of addresses that can…	Enumerationr/w Enumerated Values: 1 other 2 permanent 3 deleteOnTimeout 4 deleteOnReset	.1.3.6.1.4.1.171.11.113.10.1.2.7.1.1.3
swL2PortSecurityAdmState Indicates the administration state of the locking address.	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.171.11.113.10.1.2.7.1.1.4
swL2PortSecurityEntryClearCtrl Used to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'.	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.11.113.10.1.2.7.1.1.5

This table specifies the IP address as a destination to forward
(relay) DHCP packets to.

swL2DhcpRelayCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.8.7.1

A list of information that specifies the IP address as a destination
to forward (relay) DHCP packets to.

Indexes

swL2DhcpRelayCtrlInterfaceName swL2DhcpRelayCtrlServer

Column	Syntax	OID
swL2DhcpRelayCtrlInterfaceName The name of the IP interface.	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.171.11.113.10.1.2.8.7.1.1
swL2DhcpRelayCtrlServer The DHCP server IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.8.7.1.2
swL2DhcpRelayCtrlState This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.171.11.113.10.1.2.8.7.1.3

This table specifies information about the logical port trunk groups.

swL2TrunkCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.9.3.1

A list of information about each logical port trunk group.

Indexes

swL2TrunkIndex

Column	Syntax	OID
swL2TrunkIndex The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.9.3.1.1
swL2TrunkName The name of the logical port trunk group.	OctetStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.171.11.113.10.1.2.9.3.1.2
swL2TrunkMasterPort This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the master port. Their configuration must be the same as the mast…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.113.10.1.2.9.3.1.3
swL2TrunkMember Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.9.3.1.4
swL2TrunkFloodingPort The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.113.10.1.2.9.3.1.5
swL2TrunkType This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group.	Enumerationr/w Enumerated Values: 1 other 2 static 3 lacp	.1.3.6.1.4.1.171.11.113.10.1.2.9.3.1.6
swL2TrunkState This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.113.10.1.2.9.3.1.7

This table specifies which ports are grouped together (this can be up to 8 ports)
into a single logical link.

swL2TrunkLACPPortEntry row .1.3.6.1.4.1.171.11.113.10.1.2.9.5.1

A list of information specifying which ports are grouped together (this can be up to 8 ports)
into a single logical link.

Indexes

swL2TrunkLACPPortIndex

Column	Syntax	OID
swL2TrunkLACPPortIndex The index of logical port LACP.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.9.5.1.1
swL2TrunkLACPPortState The state of a logical port LACP.	Enumerationr/w Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.171.11.113.10.1.2.9.5.1.2

This table is used to manage the VLAN trunking feature of the device.

swL2TrunkVLANEntry row .1.3.6.1.4.1.171.11.113.10.1.2.9.6.1

This object is used to configure the VLAN trunking settings for each port.

Indexes

swL2TrunkVLANPort

Column	Syntax	OID
swL2TrunkVLANPort This object indicates the port being configured.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.9.6.1.1
swL2TrunkVLANState The state of the logical port LACP.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.9.6.1.2

This table specifies information about the mirror group configuration.

swL2MirrorGroupEntry row .1.3.6.1.4.1.171.11.113.10.1.2.10.5.1

A list of information about each mirror group configuration.

Indexes

swL2MirrorGroupID

Column	Syntax	OID
swL2MirrorGroupID This object indicates the mirror group. The range of this object is (1..N), the value of N is project dependent.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.10.5.1.1
swL2MirrorGroupRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.113.10.1.2.10.5.1.2
swL2MirrorGroupState This object indicates the mirror group state.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.10.5.1.3
swL2MirrorGroupTargetPort This object indicates the mirror group target port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.10.5.1.4
swL2MirrorGroupSourceIngress This object indicates the mirror group ingress source ports.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.10.5.1.5
swL2MirrorGroupSourceEngress This object indicates the mirror group engress source ports.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.10.5.1.6

The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, 
there is only one entry in the table, with an index of 1. If the            
VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12, 
with an index range from 1 to 12.

swL2IGMPCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.4.1

The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.

Indexes

swL2IGMPCtrlVid

Column	Syntax	OID
swL2IGMPCtrlVid This object indicates the IGMP control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If the VLAN is in Port-Based mode, the VID is arranged from 1 to 12, in a …	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.1
swL2IGMPQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this switch.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.2
swL2IGMPMaxResponseTime The maximum query response time on this switch.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.3
swL2IGMPRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high packet loss, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) pac…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.4
swL2IGMPLastMemberQueryInterval The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.5
swL2IGMPHostTimeoutobsolete The timer value for sending IGMP query packets when none were sent by the host on the LAN. The timer works on a per-VLAN basis. Our device will be activated to send the query messages if the timer expires. Please ref…	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.6
swL2IGMPRouteTimeoutobsolete The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.7
swL2IGMPLeaveTimerobsolete When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.8
swL2IGMPQueryState This object decides if the IGMP query is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.9
swL2IGMPCurrentState This object indicates the current IGMP query state.	Enumeration Enumerated Values: 1 other 2 querier 3 non-querier	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.10
swL2IGMPCtrlState This object indicates the status of this entry. other (1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.11
swL2IGMPFastLeaveState This object indicates the fast_leave status of this entry. other (1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following valu…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.12
swL2IGMPQueryVersion Configure the IGMP version of query packet which will be sent by the router.	Integer32r/w Constraints: range: 1-3	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.13
swL2IGMPRateLimit Config the rate of IGMP report or leave packet that the switch can process on a specific VLAN. The rate is specified in packet per second. The packet that exceeds the limited rate will be dropped. This se…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.14
swL2IGMPReportSuppression When enabled, multiple IGMP reports or leaves for a specific group (S,G) will be integrated into only one report before being sent to the router port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.11.4.1.15

This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device.

swL2IGMPQueryInfoEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.5.1

Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled.

Indexes

swL2IGMPInfoVid

Column	Syntax	OID
swL2IGMPInfoVid This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.113.10.1.2.11.5.1.1
swL2IGMPInfoQueryCountobsolete This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.5.1.2
swL2IGMPInfoTxQueryCountobsolete This object indicates the send count of IGMP query messages, on a per-VLAN basis. In the case of an IGMP timer expiration, the switch will send IGMP query packets to all related VLAN member ports and increment this obje…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.5.1.3
swL2IGMPQueryIPAddress This object identifies the Query IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.11.5.1.4
swL2IGMPQueryExpiryTime This object indicates the Query Expiry Time.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.5.1.5

The table containing current IGMP information which was captured by            
this device, provided that the swL2DevCtrlIGMPSnooping and          
swL2IGMPCtrlState of the associated VLAN entries are all enabled. 
Note that the priority of IGMP table entries is lower than the Filtering            
Table, i.e. if there is a table hash collision between entries in the 
IGMP Table and Filtering Table inside the switch's H/W address table, 
then the Filtering Table entry overwrites the colliding entry of the IGMP Table.  
Also see the swL2FilterMgmt description.

swL2IGMPInfoEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.6.1

Information about current IGMP information which was captured by
this device, provided that the swL2DevCtrlIGMPSnooping and the
swL2IGMPCtrlState of associated VLAN entries are all enabled.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr

Column	Syntax	OID
swL2IGMPVidobsolete This object indicates the VID of individual IGMP table entries. It shows the VID IGMP report information captured on the network.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.113.10.1.2.11.6.1.1
swL2IGMPGroupIpAddrobsolete This object identifies group IP addresses which were captured from IGMP packets, on a per-VLAN basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.11.6.1.2
swL2IGMPMacAddrobsolete This object identifies MAC addresses which correspond to the swL2IGMPGroupIpAddr, on a per-VLAN basis.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.113.10.1.2.11.6.1.3
swL2IGMPPortMapobsolete This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string which is indicated by a port map. The most significant bit rep…	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.6.1.4
swL2IGMPIpGroupReportCountobsolete This object indicates how many report packets were received by the device, that correspond with this entry when the IGMP function is enabled on a per-VLAN basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.6.1.5
swL2IGMPVersionobsolete This object identifies the version of IGMP from IGMP packets, on a per-VLAN basis.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.11.6.1.6
swL2IGMPGroupModeobsolete When the version of IGMP is v3, this object identifies whether the group is in INCLUDE or EXCLUDE mode.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.171.11.113.10.1.2.11.6.1.7

The information of the router port table.

swL2IGMPRouterPortEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.7.1

The entry of swL2IGMPRouterPortTable.

Indexes

swL2IGMPRouterPortVlanid

Column	Syntax	OID
swL2IGMPRouterPortVlanid This object indicates the VLAN ID of the router's port entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.113.10.1.2.11.7.1.1
swL2IGMPRouterPortVlanName This object indicates the VLAN name of the router's port entry.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.171.11.113.10.1.2.11.7.1.2
swL2IGMPRouterPortStaticPortList This object indicates the static portlist of the router's port entry.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.7.1.3
swL2IGMPRouterPortDynamicPortList This object indicates the dynamic portlist of the router's port entry.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.7.1.4
swL2IGMPRouterPortForbiddenPortList This object indicates the forbidden portlist of the router's port entry.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.7.1.5

Information about the IGMP snooping multicast VLAN table.

swL2IGMPMulticastVlanEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.8.1

The entry of swL2IGMPMulticastVlanTable.

Indexes

swL2IGMPMulticastVlanid

Column	Syntax	OID
swL2IGMPMulticastVlanid This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.1
swL2IGMPMulticastVlanName This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.2
swL2IGMPMulticastVlanSourcePort This object indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports wil…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.3
swL2IGMPMulticastVlanMemberPort This object indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the IGMP control messages received from the member port…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.4
swL2IGMPMulticastVlanTagMemberPort This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.5
swL2IGMPMulticastVlanState This object can be used to enable or disable the IGMP snooping multicast VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.6
swL2IGMPMulticastVlanReplaceSourceIp The replacement source IP of this multicast VLAN.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.7
swL2IGMPMulticastVlanRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.8
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction This object indicates whether to remove all the multicast address lists from the IGMP multicast VLAN or not.	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.9
swL2IGMPMulticastVlanUntagSourcePort This object indicates the untagged member ports to add to the multicast VLAN.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.10
swL2IGMPMulticastVlanRemapPriority The priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to 8, the packet's original priority will be used.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.11
swL2IGMPMulticastVlanReplacePriority Specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.171.11.113.10.1.2.11.8.1.12

The table containing the IGMP snooping multicast VLAN group information

swL2IGMPMulticastVlanGroupEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.9.1

Information about the current IGMP snooping multicast VLAN group.

Indexes

swL2IGMPMulticastVlanGroupVid swL2IGMPMulticastVlanGroupFromIp swL2IGMPMulticastVlanGroupToIp

Column	Syntax	OID
swL2IGMPMulticastVlanGroupVid This object indicates the VID of the IGMP snooping multicast VLAN group.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.113.10.1.2.11.9.1.1
swL2IGMPMulticastVlanGroupFromIp Specifies the multicast address list for this VLAN.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.11.9.1.2
swL2IGMPMulticastVlanGroupToIp Specifies the multicast address list for this VLAN.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.11.9.1.3
swL2IGMPMulticastVlanGroupStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.113.10.1.2.11.9.1.4

This table contains the IGMP snooping V3 information.

swL2IGMPv3Entry row .1.3.6.1.4.1.171.11.113.10.1.2.11.10.1

Information about the current IGMP snooping V3.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr swL2IGMPv3SourceIPAddr

Column	Syntax	OID
swL2IGMPv3SourceIPAddr This object identifies the source IP addresses from the group where they were captured from. IGMP packets, on a per-VLAN basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.11.10.1.1
swL2IGMPv3Forwarding This object identifies if the packets from the source IP addresses are forwarding or not.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.11.10.1.2
swL2IGMPv3ExpireTimer This object identifies the leaving times of the source time.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.11.10.1.3

The table contains the current IGMP snooping group information captured by
the device.

swIGMPSnoopingGroupEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.11.1

Information about the current IGMP snooping group information which has been captured by
the device.

Indexes

swIGMPSnoopingGroupVid swIGMPSnoopingGroupGroupAddr swIGMPSnoopingGroupSourceAddr

Column	Syntax	OID
swIGMPSnoopingGroupVid This object indicates the VID of the individual IGMP snooping group table entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.1
swIGMPSnoopingGroupGroupAddr This object identifies the group IP address which has been captured from the IGMP packet, on a per-VLAN basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.2
swIGMPSnoopingGroupSourceAddr This object identifies the source addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.3
swIGMPSnoopingGroupIncludePortMap This object indicates the port list under INCLUDE mode.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.4
swIGMPSnoopingGroupExcludePortMap This object indicates the port list under EXCLUDE mode.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.5
swIGMPSnoopingGroupReportCount This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-group basis.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.6
swIGMPSnoopingGroupUpTime This object indicates how long since the group was detected.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.7
swIGMPSnoopingGroupExpiryTime This object indicates the time left before this group will be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.8
swIGMPSnoopingGroupRouterPorts This object indicates the port number of the router ports.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.9
swIGMPSnoopingGroupStaticMemberPorts This object indicates the port number of the static member ports. This object is only supported by IGMPv2.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.113.10.1.2.11.11.1.10

This table is used to manage the IGMP dynamic IP multicast.

swL2IGMPDynIPMultCtrlEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.12.3.1

A list of manageable entities for IGMP dynamic IP multicast.

Indexes

swL2IGMPCtrlVid

Column	Syntax	OID
swL2IGMPDynIPMultVlanState This object is used to disable or enable the dynamic IP multicast feature in this VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.11.12.3.1.1
swL2IGMPDynIPMultVlanAge This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.11.12.3.1.2
swL2IGMPDynIPMultGroupExpiryTime This object indicates the dynamic IP multicast Group Expiry Time.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.12.3.1.3

This table is used to manage the IGMP Access Authentication
configurations of the device.

swL2IGMPAccessAuthEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.13.1

A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.

Indexes

swL2IGMPAccessAuthPort

Column	Syntax	OID
swL2IGMPAccessAuthPort The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.113.10.1.2.11.13.1.1
swL2IGMPAccessAuthState This object denotes the status of IGMP Access Authentication of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.113.10.1.2.11.13.1.2

This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device, based on VLAN.

swL2IGMPVlanCounterInfoEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1

Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled.

Indexes

swL2IGMPVlanCounterInfoVid

Column	Syntax	OID
swL2IGMPVlanCounterInfoVid This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable).	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.1
swL2IGMPVlanCounterGroupNumber The group number on a per VLAN basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.2
swL2IGMPVlanQueryCountV1 This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.3
swL2IGMPVlanQueryCountV2 This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.4
swL2IGMPVlanQueryCountV3 This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.5
swL2IGMPVlanDropQueryCount This object indicates the number of query packets dropped since the IGMP function was enabled, on a per-VLAN basis.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.6
swL2IGMPVlanReportCountV1 This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.7
swL2IGMPVlanReportCountV2 This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.8
swL2IGMPVlanReportCountV3 This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.9
swL2IGMPVlanLeaveCountV2 This object indicates the number of leave packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.10
swL2IGMPVlanDropedReportAndLeaveCount This object indicates the number of report and leave packets dropped since the IGMP function was enabled, on a per-VLAN basis.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.11
swL2IGMPVlanDroppedByMaxGroupLimitation This object indicates the number of packets received dropped by max group limitation since the IGMP function was enabled, on a per-VLAN basis.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.12
swL2IGMPVlanDroppedByGroupFilter This object indicates the number of packets received dropped by group filter since the IGMP function was enabled, on a per-VLAN basis.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.13
swL2IGMPVlanTxQueryCountV1 This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv1.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.14
swL2IGMPVlanTxQueryCountV2 This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.15
swL2IGMPVlanTxQueryCountV3 This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv3.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.16
swL2IGMPVlanTxReportCountV1 This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv1.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.17
swL2IGMPVlanTxReportCountV2 This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.18
swL2IGMPVlanTxReportCountV3 This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv3.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.19
swL2IGMPVlanTxLeaveCountV2 This object indicates the send count of IGMP leave messages, on a per-VLAN basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.2.1.20

This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device, based on port.

swL2IGMPPortCounterInfoEntry row .1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1

Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled.

Indexes

swL2IGMPPortCounterInfoIndex

Column	Syntax	OID
swL2IGMPPortCounterInfoIndex This object indicates the port number of the associated IGMP Counter info table entry.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.1
swL2IGMPPortCounterGroupNumber Group number per port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.2
swL2IGMPPortQueryCountV1 This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv1.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.3
swL2IGMPPortQueryCountV2 This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.4
swL2IGMPPortQueryCountV3 This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv3.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.5
swL2IGMPPortDropQueryCount This object indicates the number of query packets dropped since the IGMP function was enabled, on a per-port basis.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.6
swL2IGMPPortReportCountV1 This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv1.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.7
swL2IGMPPortReportCountV2 This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.8
swL2IGMPPortReportCountV3 This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv3.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.9
swL2IGMPPortLeaveCountV2 This object indicates the number of leave packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.10
swL2IGMPPortDropedReportAndLeaveCount This object indicates the number of report and leave packets dropped since the IGMP function was enabled, on a per-port basis.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.11
swL2IGMPPortDroppedByMaxGroupLimitation This object indicates the number of packets received dropped by max group limitation since the IGMP function was enabled, on a per-port basis.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.12
swL2IGMPPortDroppedByGroupFilter This object indicates the number of packets received dropped by group filter since the IGMP function was enabled, on a per-port basis.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.13
swL2IGMPPortTxQueryCountV1 This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv1.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.14
swL2IGMPPortTxQueryCountV2 This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.15
swL2IGMPPortTxQueryCountV3 This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv3.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.16
swL2IGMPPortTxReportCountV1 This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv1.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.17
swL2IGMPPortTxReportCountV2 This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.18
swL2IGMPPortTxReportCountV3 This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv3.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.19
swL2IGMPPortTxLeaveCountV2 This object indicates the send count of IGMP leave messages, on a per-port basis, for IGMPv2.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.113.10.1.2.11.14.3.1.20