DES3052-L2MGMT-MIB Table View

A table that contains information about every port.

swL2PortInfoEntry row .1.3.6.1.4.1.171.11.63.8.2.2.1.1

A list of information for each port of the device.

Indexes

swL2PortInfoPortIndex swL2PortInfoMediumType

Column	Syntax	OID
swL2PortInfoPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.8.2.2.1.1.1
swL2PortInfoMediumType This object indicates the port type: fiber or copper.	Enumeration Enumerated Values: 100 copper 101 fiber	.1.3.6.1.4.1.171.11.63.8.2.2.1.1.2
swL2PortInfoLinkStatus This object indicates the port link status.	Enumeration Enumerated Values: 1 other 2 link-pass 3 link-fail	.1.3.6.1.4.1.171.11.63.8.2.2.1.1.4
swL2PortInfoNwayStatus This object indicates the port speed and duplex mode.	Enumeration Enumerated Values: 1 auto 2 half-10Mbps 3 full-10Mbps 4 half-100Mbps 5 full-100Mbps 6 half-1Gigabps 7 full-1Gigabps	.1.3.6.1.4.1.171.11.63.8.2.2.1.1.5

A table that contains control information about every port.

swL2PortCtrlEntry row .1.3.6.1.4.1.171.11.63.8.2.2.2.1

A list of control information for each port of the device.

Indexes

swL2PortCtrlPortIndex swL2PortCtrlPortMediumType

Column	Syntax	OID
swL2PortCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.1
swL2PortCtrlPortMediumType This object indicates the port type: fiber or copper.	Enumerationr/w Enumerated Values: 100 copper 101 fiber	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.2
swL2PortCtrlAdminState This object decides whether the port is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.3
swL2PortCtrlNwayState Choose the port speed, duplex mode, and N-Way function mode.	Enumerationr/w Enumerated Values: 1 nway-auto 2 nway-disabled-10Mbps-Half 3 nway-disabled-10Mbps-Full 4 nway-disabled-100Mbps-Half 5 nway-disabled-100Mbps-Full 7 nway-disabled-1Gigabps-Full 8 nway-disabled-1Gigabps-Full-Master 9 nway-disabled-1Gigabps-Full-Slave	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.4
swL2PortCtrlFlowCtrlState Set the flow control function as enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.5
swL2PortCtrlDescription The object describes the ports in text.	RFC1213-MIBDisplayStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.6
swL2PortCtrlAddressLearning This object decides whether the address learning is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.7
swL2PortCtrlMACNotifyState This object sets each port's MAC notification state.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.8
swL2PortCtrlMulticastfilter This object decides the multicast packet filtering mode on this port.	Enumerationr/w Enumerated Values: 2 forward-unregistered-groups 3 filter-unregistered-groups	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.9
swL2PortCtrlMDIXState This object configures the MDIX setting of the port. The value 'other' is for those entries in which MDIX is not applicable.	Enumerationr/w Enumerated Values: 1 auto 2 normal 3 cross 4 other	.1.3.6.1.4.1.171.11.63.8.2.2.2.1.10

A table that contains information about the Err port.

swL2PortErrEntry row .1.3.6.1.4.1.171.11.63.8.2.2.3.1

A list of information for the err port of the device.

Indexes

swL2PortErrPortIndex

Column	Syntax	OID
swL2PortErrPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.8.2.2.3.1.1
swL2PortErrPortState This object decides whether the port state is enabled or disabled.	Enumeration Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.171.11.63.8.2.2.3.1.2
swL2PortErrPortStatus This object decides whether the PortStatus is err-disabled.	Enumeration Enumerated Values: 1 other 2 err-disabled	.1.3.6.1.4.1.171.11.63.8.2.2.3.1.3
swL2PortErrPortReason This object indicates the module which disabled the port.	Enumeration Enumerated Values: 1 stp-lbd 2 storm-control 3 ddm 4 duld	.1.3.6.1.4.1.171.11.63.8.2.2.3.1.4
swL2PortErrDescription The object describes the ports in text.	RFC1213-MIBDisplayString Constraints: range: 0-32	.1.3.6.1.4.1.171.11.63.8.2.2.3.1.5

.

swL2QOSBandwidthControlEntry row .1.3.6.1.4.1.171.11.63.8.2.3.1.1

A list of information contained in swL2QOSBandwidthControlTable.

Indexes

swL2QOSBandwidthPortIndex

Column	Syntax	OID
swL2QOSBandwidthPortIndex Indicates the port.	Integer32 Constraints: range: 1-650	.1.3.6.1.4.1.171.11.63.8.2.3.1.1.1
swL2QOSBandwidthRxRate Indicates the RX Rate(Mbit/sec) of the specifed port. A value of 1024000 means no limit.	Integer32r/w Constraints: range: 64-1024000	.1.3.6.1.4.1.171.11.63.8.2.3.1.1.2
swL2QOSBandwidthTxRate Indicates the TX Rate(Mbit/sec) of the specifed port. A value of 1024000 means no limit.	Integer32r/w Constraints: range: 64-1024000	.1.3.6.1.4.1.171.11.63.8.2.3.1.1.3
swL2QOSBandwidthRadiusRxRate The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.3.1.1.4
swL2QOSBandwidthRadiusTxRate The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.3.1.1.5

.

swL2QOSSchedulingEntry row .1.3.6.1.4.1.171.11.63.8.2.3.2.1

A list of information contained in the swL2QOSSchedulingTable.

Indexes

swL2QOSSchedulingClassIndex

Column	Syntax	OID
swL2QOSSchedulingClassIndex Indicates the hardware queue number.	Integer32 Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.8.2.3.2.1.1
swL2QOSSchedulingMaxWeight	Integer32r/w Constraints: range: 1-55	.1.3.6.1.4.1.171.11.63.8.2.3.2.1.4
swL2QOSSchedulingMechanism Indicates the mechanism of QOS scheduling.	Enumeration Enumerated Values: 1 strict 2 roundrobin 3 weightfair	.1.3.6.1.4.1.171.11.63.8.2.3.2.1.5

.

swL2QOS8021pUserPriorityEntry row .1.3.6.1.4.1.171.11.63.8.2.3.3.1

A list of information contained in the swL2QOS8021pUserPriorityTable.

Indexes

swL2QOS8021pUserPriorityIndex

Column	Syntax	OID
swL2QOS8021pUserPriorityIndex The 802.1p user priority.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.171.11.63.8.2.3.3.1.1
swL2QOS8021pUserPriorityClass The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority).	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.8.2.3.3.1.2

.

swL2QOS8021pDefaultPriorityEntry row .1.3.6.1.4.1.171.11.63.8.2.3.4.1

A list of information contained in the swL2QOS8021pDefaultPriorityTable.

Indexes

swL2QOS8021pDefaultPriorityIndex

Column	Syntax	OID
swL2QOS8021pDefaultPriorityIndex Indicates the port number.	Integer32 Constraints: range: 1-650	.1.3.6.1.4.1.171.11.63.8.2.3.4.1.1
swL2QOS8021pDefaultPriority The priority value to assign to untagged packets received by the switch ports on the switch.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.171.11.63.8.2.3.4.1.2
swL2QOS8021pRadiusPriority Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.3.4.1.3

This table specifies the port membership for each logical link.

swPortTrunkEntry row .1.3.6.1.4.1.171.11.63.8.2.4.3.1

A list of information that specifies which port group forms
a single logical link.

Indexes

swPortTrunkIndex

Column	Syntax	OID
swPortTrunkIndex The index of logical port trunk.	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.171.11.63.8.2.4.3.1.1
swPortTrunkMasterPort The object indicates the master port number of the port trunk entry. The first port of the trunk is implicitly configured to be the master logical port. When using a Port Trunk, you can not configure the other ports o…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.4.3.1.2
swPortTrunkPortList Indicate member ports of a logical trunk.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.4.3.1.3
swPortTrunkType This object indicates the type of this entry.	Enumerationr/w Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.171.11.63.8.2.4.3.1.4
swPortTrunkActivePort This object indicates the active ports of this entry.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.4.3.1.5
swPortTrunkState This object indicates the status of this entry. when the state is CreatAndGo (4),the type of trunk is static (1); when the state is CreatAndWait (5), the type of trunk is lacp(2).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.63.8.2.4.3.1.6
swPortTrunkFloodingPort The flooding port of every trunk.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.4.3.1.7

This table specifies which port group a set of ports (up to 8)
is formed into a single logical link.

swL2TrunkLACPPortEntry row .1.3.6.1.4.1.171.11.63.8.2.4.5.1

A list of information specifies which port group a set of
ports (up to 8) is formed into a single logical link.

Indexes

swL2TrunkLACPPortIndex

Column	Syntax	OID
swL2TrunkLACPPortIndex The index of the logical port LACP.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.4.5.1.1
swL2TrunkLACPPortState The state of the logical port LACP.	Enumerationr/w Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.171.11.63.8.2.4.5.1.2

This table is used to manage the VLAN trunking feature of the device.

swL2TrunkVLANEntry row .1.3.6.1.4.1.171.11.63.8.2.4.6.1

This object is used to configure the VLAN trunking settings for each port.

Indexes

swL2TrunkVLANPort

Column	Syntax	OID
swL2TrunkVLANPort This object indicates the port being configured.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.4.6.1.1
swL2TrunkVLANState The state of the logical port LACP.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.63.8.2.4.6.1.2

The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN mode is disabled, there is only one entry in the table, with index 1. If 
VLAN is in Port-Based or 802.1q mode, the number of entries can 
be up to 12, with an index range from 1 to 12.

swL2IGMPCtrlEntry row .1.3.6.1.4.1.171.11.63.8.2.7.3.1

An entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP captures the switch
(swL2DevCtrlIGMPSnooping) is enabled.

Indexes

swL2IGMPCtrlVid

Column	Syntax	OID
swL2IGMPCtrlVid This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Based mode, the VID is arranged from 1 to 12, fixed form. If…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.1
swL2IGMPQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this switch.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.2
swL2IGMPMaxResponseTime The maximum query response time on this switch.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.3
swL2IGMPRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.4
swL2IGMPLastMemberQueryInterval The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.5
swL2IGMPHostTimeout The timer value for sending IGMP query packets when none was sent by the host in the LAN. The timer works on a per-VLAN basis. Our device will be activated to send the query message if the timer expires. Please refere…	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.6
swL2IGMPRouteTimeout The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.7
swL2IGMPLeaveTimer When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.8
swL2IGMPQueryState This object decides if the IGMP query is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.9
swL2IGMPCurrentState This object indicates the current IGMP query state.	Enumeration Enumerated Values: 1 other 2 querier 3 non-querier	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.10
swL2IGMPCtrlState This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.11
swL2IGMPFastLeave	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.12
swL2IGMPDynIPMultVlanState This object is used to disable or enable the dynamic IP multicast feature in this VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.13
swL2IGMPDynIPMultVlanAge This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.63.8.2.7.3.1.14

The table contains the number of current IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device.

swL2IGMPQueryInfoEntry row .1.3.6.1.4.1.171.11.63.8.2.7.4.1

Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled.

Indexes

swL2IGMPInfoVid

Column	Syntax	OID
swL2IGMPInfoVid This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.7.4.1.1
swL2IGMPInfoQueryCount This object indicates the number of query packets received since the IGMP function enabled, on a per-VLAN basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.7.4.1.2
swL2IGMPInfoTxQueryCount This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiring, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.7.4.1.3

The table containing current IGMP information which was captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled. Note
that the priority of IGMP table entries is lower than Filtering
Table, i.e. if there is a table hash collision between the 
entries of IGMP Table and Filtering Table inside the switch H/W
address table, then Filtering Table entry overwrite the 
colliding entry of IGMP Table. Also see swL2FilterMgmt description.

swL2IGMPInfoEntry row .1.3.6.1.4.1.171.11.63.8.2.7.5.1

Information about current IGMP information which was captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr

Column	Syntax	OID
swL2IGMPVid This object indicates the VID of an individual IGMP table entry. It shows the VID of IGMP report information captured on the network.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.7.5.1.1
swL2IGMPGroupIpAddr This object is the identify group IP address which is captured from IGMP packet, on a per-VLAN basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.7.5.1.2
swL2IGMPMacAddr This object identifies the MAC address which is corresponding to swL2IGMPGroupIpAddr, on a per-VLAN basis.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.63.8.2.7.5.1.3
swL2IGMPPortMap This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string to indicate the port map. The most significant bit represents the lowest numbered port…	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.5.1.4
swL2IGMPIpGroupReportCount This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-VLAN basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.7.5.1.5

The information of the router port table.

swL2IGMPRouterPortEntry row .1.3.6.1.4.1.171.11.63.8.2.7.6.1

The entry of the swL2IGMPRouterPortTable.

Indexes

swL2IGMPRouterPortVlanid

Column	Syntax	OID
swL2IGMPRouterPortVlanid This object indicates the VLAN ID of the router port entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.63.8.2.7.6.1.1
swL2IGMPRouterPortVlanName This object indicates the VLAN name of the router port entry.	SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-32	.1.3.6.1.4.1.171.11.63.8.2.7.6.1.2
swL2IGMPRouterPortStaticPortList This object indicates the static portlist of the router port entry.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.6.1.3
swL2IGMPRouterPortDynamicPortList This object indicates the dynamic portlist of the router port entry.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.6.1.4
swL2IGMPRouterPortForbiddenPortList This object indicates the forbidden portlist of the router port entry.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.6.1.5

This table is used to manage the IGMP Access Authentication 
configurations of the device.

swL2IGMPAccessAuthEntry row .1.3.6.1.4.1.171.11.63.8.2.7.7.1

A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.

Indexes

swL2IGMPAccessAuthPort

Column	Syntax	OID
swL2IGMPAccessAuthPort The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.7.7.1.1
swL2IGMPAccessAuthState This object denotes the status of IGMP Access Authentication of the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.171.11.63.8.2.7.7.1.2

Information about the IGMP snooping multicast VLAN table.

swL2IGMPMulticastVlanEntry row .1.3.6.1.4.1.171.11.63.8.2.7.8.1

The entry of swL2IGMPMulticastVlanTable.

Indexes

swL2IGMPMulticastVlanid

Column	Syntax	OID
swL2IGMPMulticastVlanid This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.1
swL2IGMPMulticastVlanName This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.	RFC1213-MIBDisplayStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.2
swL2IGMPMulticastVlanSourcePort This object indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports wil…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.3
swL2IGMPMulticastVlanMemberPort This object indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the IGMP control messages received from the member port…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.4
swL2IGMPMulticastVlanTagMemberPort This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.5
swL2IGMPMulticastVlanState This object can be used to enable or disable the IGMP snooping multicast VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.6
swL2IGMPMulticastVlanReplaceSourceIp The replacement source IP of this multicast VLAN.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.7
swL2IGMPMulticastVlanRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.8
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction This object indicates whether to remove all the multicast address lists from the IGMP multicast VLAN or not.	Enumerationr/w Enumerated Values: 1 other 2 start	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.9
swL2IGMPMulticastVlanUntagSourcePort This object indicates the untagged member ports to add to the multicast VLAN.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.10
swL2IGMPMulticastVlanRemapPriority The priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to 8, the packet's original priority will be used.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.11
swL2IGMPMulticastVlanReplacePriority Specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.171.11.63.8.2.7.8.1.12

The table containing the IGMP snooping multicast VLAN group information

swL2IGMPMulticastVlanGroupEntry row .1.3.6.1.4.1.171.11.63.8.2.7.9.1

Information about the current IGMP snooping multicast VLAN group.

Indexes

swL2IGMPMulticastVlanGroupVid swL2IGMPMulticastVlanGroupFromIp swL2IGMPMulticastVlanGroupToIp

Column	Syntax	OID
swL2IGMPMulticastVlanGroupVid This object indicates the VID of the IGMP snooping multicast VLAN group.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.63.8.2.7.9.1.1
swL2IGMPMulticastVlanGroupFromIp Specifies the multicast address list for this VLAN.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.7.9.1.2
swL2IGMPMulticastVlanGroupToIp Specifies the multicast address list for this VLAN.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.7.9.1.3
swL2IGMPMulticastVlanGroupStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.63.8.2.7.9.1.4

This table contains the IGMP snooping V3 information.

swL2IGMPv3Entry row .1.3.6.1.4.1.171.11.63.8.2.7.10.1

Information about the current IGMP snooping V3.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr swL2IGMPv3SourceIPAddr

Column	Syntax	OID
swL2IGMPv3SourceIPAddr This object identifies the source IP addresses from the group where they were captured from. IGMP packets, on a per-VLAN basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.7.10.1.1
swL2IGMPv3Forwarding This object identifies if the packets from the source IP addresses are forwarding or not.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.63.8.2.7.10.1.2
swL2IGMPv3ExpireTimer This object identifies the leaving times of the source time.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.7.10.1.3

The table contains the current IGMP snooping group information captured by
the device.

swIGMPSnoopingGroupEntry row .1.3.6.1.4.1.171.11.63.8.2.7.11.1

Information about the current IGMP snooping group information which has been captured by
the device.

Indexes

swIGMPSnoopingGroupVid swIGMPSnoopingGroupGroupAddr swIGMPSnoopingGroupSourceAddr

Column	Syntax	OID
swIGMPSnoopingGroupVid This object indicates the VID of the individual IGMP snooping group table entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.1
swIGMPSnoopingGroupGroupAddr This object identifies the group IP address which has been captured from the IGMP packet, on a per-VLAN basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.2
swIGMPSnoopingGroupSourceAddr This object identifies the source addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.3
swIGMPSnoopingGroupIncludePortMap This object indicates the port list under INCLUDE mode.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.4
swIGMPSnoopingGroupExcludePortMap This object indicates the port list under EXCLUDE mode.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.5
swIGMPSnoopingGroupReportCount This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-group basis.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.6
swIGMPSnoopingGroupUpTime This object indicates how long since the group was detected.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.7
swIGMPSnoopingGroupExpiryTime This object indicates the time left before this group will be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.8
swIGMPSnoopingGroupRouterPorts This object indicates the port number of the router ports.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.7.11.1.9

This table specifies the port just can forward traffic to the 
specific port list.

swL2TrafficSegEntry row .1.3.6.1.4.1.171.11.63.8.2.12.1.1

A list of information specifies the port with its traffic
forward list.

Indexes

swL2TrafficSegPort

Column	Syntax	OID
swL2TrafficSegPort The port number of the logical port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.8.2.12.1.1.1
swL2TrafficSegForwardPorts The port list that the specific port can forward traffic.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.8.2.12.1.1.2

The port security feature controls the address leaning capability and the
traffic forwarding decision. Each port can have this function enabled or disabled.
When it is enabled and a number is given said N, which allows N addresses to be
learned at this port, the first N learned addresses are locked at this port as
a static entry. When the learned address number reaches N, any incoming packet without
learned source addresses are discarded (e.g. dropped) and no more new addresses
can be learned at this port.

swL2PortSecurityControlEntry row .1.3.6.1.4.1.171.11.63.8.2.15.1.1

A list of information contained in the swL2PortSecurityControlTable.

Indexes

swL2PortSecurityPortIndex

Column	Syntax	OID
swL2PortSecurityPortIndex Indicates a secured port to lock address learning.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.8.2.15.1.1.1
swL2PortSecurityMaxLernAddr Indicates the allowable number of addresses to be learned at this port.	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.171.11.63.8.2.15.1.1.2
swL2PortSecurityMode Indicates the mode of locking address. In deleteOnTimeout (3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that ca…	Enumerationr/w Enumerated Values: 1 other 2 permanent 3 deleteOnTimeout 4 deleteOnReset	.1.3.6.1.4.1.171.11.63.8.2.15.1.1.3
swL2PortSecurityAdmState Indicates an administration state of locking address.	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.171.11.63.8.2.15.1.1.4

Used to show and configure per port priority-based QoS features on the switch.

swL2CosPriorityEntry row .1.3.6.1.4.1.171.11.63.8.2.17.3.1.1

A list of information contained in the swL2CosPriorityTable.

Indexes

swL2CosPriorityPort

Column	Syntax	OID
swL2CosPriorityPort The port number of CoS Priority.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.1
swL2CosPriorityPortPRI Indicates the port_priority state for CoS.	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.2
swL2CosPriorityEtherPRI Enable Ethernet frame based priority. When set ether8021p (2), enable 802.1p QoS; When set macBase (3), enable MAC-based QoS; When set disable (1), disable Ethernet frame based priority.	Enumerationr/w Enumerated Values: 1 disable 2 ether8021p 3 macBase	.1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.3
swL2CosPriorityIpPRI Enable IP priority QoS. When set tos (2), enable TOS based QoS; When set dscp (3), enable DSCP based QoS; When set disable (1), disable IP priority QoS.	Enumerationr/w Enumerated Values: 1 disable 2 tos 3 dscp	.1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.4
swL2CosPriorityNone When read, it always returns invalid (2); when write valid (1), it disables all priority in this table.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.5

Used to show port-to-class mappings and
map specific port to one of the hardware queues available on the switch.

swL2CosPortPRIEntry row .1.3.6.1.4.1.171.11.63.8.2.17.3.2.1

A list of information contained in the swL2CosPortPRITable.

Indexes

swL2CosPortPRIIndex

Column	Syntax	OID
swL2CosPortPRIIndex Indicates the CoS Priority PortPRI.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.8.2.17.3.2.1.1
swL2CosPortPRIClass The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set on…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.8.2.17.3.2.1.2

Used to show MAC priority map to traffic class and 
map the destination MAC address in incoming packet to one of the hardware queues available on the switch.

swL2CosMacBasePRIEntry row .1.3.6.1.4.1.171.11.63.8.2.17.3.3.1

A list of information contained in the swL2CosMacBasePRITable.

Indexes

swL2CosMacBasePRIIndex

Column	Syntax	OID
swL2CosMacBasePRIIndex Indicates the CoS Priority MacBasePRI.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.63.8.2.17.3.3.1.1
swL2CosMacBasePRIClass The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set on…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.8.2.17.3.3.1.2

Used to show TOS value to traffic class mapping and
map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch.

swL2CosTosPRIEntry row .1.3.6.1.4.1.171.11.63.8.2.17.3.4.1

A list of information contained in the swL2CosTosPRITable.

Indexes

swL2CosTosPRIIndex

Column	Syntax	OID
swL2CosTosPRIIndex Indicates the CoS Priority TosPRI.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.171.11.63.8.2.17.3.4.1.1
swL2CosTosPRIClass The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set on…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.8.2.17.3.4.1.2

Used to show DSCP value to traffic class mapping and
map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch.

swL2CosDscpPRIEntry row .1.3.6.1.4.1.171.11.63.8.2.17.3.5.1

A list of information contained in the swL2CosDscpPRITable.

Indexes

swL2CosDscpPRIIndex

Column	Syntax	OID
swL2CosDscpPRIIndex Indicates the CoS Priority DscpPRI.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.171.11.63.8.2.17.3.5.1.1
swL2CosDscpPRIClass The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set on…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.8.2.17.3.5.1.2

This table specifies the IP address as a destination to forward
(relay) DHCP packets to.

swL2DhcpRelayCtrlEntry row .1.3.6.1.4.1.171.11.63.8.2.18.7.1

A list of information specifies the IP address as a destination
to forward (relay) DHCP packets to.

Indexes

swL2DhcpRelayCtrlInterfaceName swL2DhcpRelayCtrlServer

Column	Syntax	OID
swL2DhcpRelayCtrlInterfaceNameobsolete The name of the IP interface.	RFC1213-MIBDisplayString Constraints: range: 1-12	.1.3.6.1.4.1.171.11.63.8.2.18.7.1.1
swL2DhcpRelayCtrlServer The DHCP server IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.18.7.1.2
swL2DhcpRelayCtrlStateobsolete This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.171.11.63.8.2.18.7.1.3

The table specifies the loopback detection function specified by port.

swL2LoopDetectPortEntry row .1.3.6.1.4.1.171.11.63.8.2.21.2.1.1

The table specifies the loopback detection function specified by port.

Indexes

swL2LoopDetectPortIndex

Column	Syntax	OID
swL2LoopDetectPortIndex This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.8.2.21.2.1.1.1
swL2LoopDetectPortState This object indicates the loopback detection function state on the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.63.8.2.21.2.1.1.2
swL2LoopDetectPortLoopStatus This object indicates the port status.	Enumeration Enumerated Values: 1 normal 2 loop 3 error	.1.3.6.1.4.1.171.11.63.8.2.21.2.1.1.4

A table that contains information about the multicast filter address.

swL2McastFilterEntry row .1.3.6.1.4.1.171.11.63.8.2.22.2.1

A list of multicast filter mode information for each profile ID.

Indexes

swL2McastFilterProfileIndex

Column	Syntax	OID
swL2McastFilterProfileIndex index for each profile	Integer32 Constraints: range: 1-24	.1.3.6.1.4.1.171.11.63.8.2.22.2.1.1
swL2McastFilterProfileName The multicast filter description.	RFC1213-MIBDisplayStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.171.11.63.8.2.22.2.1.2
swL2McastFilterAddOrDelState The control multicast filter address.	Enumerationr/w Enumerated Values: 1 none 2 add 3 delete	.1.3.6.1.4.1.171.11.63.8.2.22.2.1.3
swL2McastFilterGroupList The multicast filter address group list.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.171.11.63.8.2.22.2.1.4
swL2McastFilterStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.63.8.2.22.2.1.5

A table that is used to bind port to profile ID.

swL2McastFilterPortEntry row .1.3.6.1.4.1.171.11.63.8.2.22.3.1

A list of information that is used to bind port to profile ID.

Indexes

swL2McastFilterPortGroupPortIndex

Column	Syntax	OID
swL2McastFilterPortGroupPortIndex The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.22.3.1.1
swL2McastFilterPortProfileAddOrDelState The control multicast filter profile.	Enumerationr/w Enumerated Values: 1 none 2 add 3 delete	.1.3.6.1.4.1.171.11.63.8.2.22.3.1.2
swL2McastFilterPortProfileID This object indicates the profile ID of this entry. When read, it is always 0. When set, 0 can not be set.	Integer32r/w Constraints: range: 0-24	.1.3.6.1.4.1.171.11.63.8.2.22.3.1.3

A table that contains information about the max group number based on port.

swL2McastFilterPortMaxGroupEntry row .1.3.6.1.4.1.171.11.63.8.2.22.4.1

A list of max group number information for each port.

Indexes

swL2McastFilterPortMaxGroupPortIndex

Column	Syntax	OID
swL2McastFilterPortMaxGroupPortIndex The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.22.4.1.1
swL2McastFilterPortMaxGroup The max group numbers. The default is 256.	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.171.11.63.8.2.22.4.1.2

A table that contains information about all of the multicast groups for the ports.

swL2McastFilterPortInfoEntry row .1.3.6.1.4.1.171.11.63.8.2.22.5.1

A list of information about all of the multicast groups for each port.

Indexes

swL2McastFilterPortInfoPortIndex

Column	Syntax	OID
swL2McastFilterPortInfoPortIndex The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.22.5.1.1
swL2McastFilterPortInfoProfileName The multicast filter address profile Name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.171.11.63.8.2.22.5.1.2

A table containing the advertisement state for each
VLAN configured into the device by (local or
network) management.

swL2VlanAdvertisementEntry row .1.3.6.1.4.1.171.11.63.8.2.23.1.1

The advertisement state for each VLAN configured
into the device.

Indexes

swL2VlanIndex

Column	Syntax	OID
swL2VlanIndex The VLAN-ID or other identifier referring to this VLAN.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.63.8.2.23.1.1.1
swL2VlanName An administratively assigned string, which may be used to identify the VLAN.	RFC1213-MIBDisplayString Constraints: range: 0-32	.1.3.6.1.4.1.171.11.63.8.2.23.1.1.2
swL2VlanAdvertiseState This object indicates the advertise status of this VLAN entry.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.8.2.23.1.1.3

This table is used to manage the DHCP local relay status 
for each VLAN.

swL2DhcpLocalRelayVLANEntry row .1.3.6.1.4.1.171.11.63.8.2.24.2.1

This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.

Indexes

swL2DhcpLocalRelayVLANID

Column	Syntax	OID
swL2DhcpLocalRelayVLANID This object shows the VIDs of the current VLANS in the switch.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.63.8.2.24.2.1.1
swL2DhcpLocalRelayVLANState This object indicates the status of the DHCP relay function of the VLAN.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.8.2.24.2.1.2

A table containing a list of configured IP addresses to which the Auto FDB function 
will discover the corresponding VLAN, MAC address and port and have a corresponding
static FDB entry created automatically.

swL2FloodMACAutoFDBCtrlEntry row .1.3.6.1.4.1.171.11.63.8.2.25.1.2.1

Information containing the configured Auto FDB IP address.

Indexes

swL2FloodMACAutoFDBIPAddress

Column	Syntax	OID
swL2FloodMACAutoFDBIPAddress The Auto FDB IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.8.2.25.1.2.1.1
swL2FloodMACAutoFDBRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.63.8.2.25.1.2.1.2

A table containing a list of current and historical flooding MAC entries.

swL2FloodMACFDBEntry row .1.3.6.1.4.1.171.11.63.8.2.25.2.1.1

Information containing the flooding MAC address.

Indexes

swL2FloodMACFDBIndex swL2FloodMACFDBVID swL2FloodMACFDBMacAddress

Column	Syntax	OID
swL2FloodMACFDBIndex The hardware address table index of the flooding MAC entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.1
swL2FloodMACFDBVID The VLAN identifier of the flooding MAC entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.2
swL2FloodMACFDBMacAddress The MAC address of the flooding MAC entry.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.3
swL2FloodMACFDBStatus The status of the flooding MAC entry. When the value is 'active', this means the entry is currently present in the hardware address table, otherwise, the value is 'inactive'.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.4
swL2FloodMACFDBTimestamp A number that correlates to a relative time the entry was detected by the Flooding MAC function.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.5

A table containing the discovered VLAN, MAC address and port of the host 
with an IP address created in swL2FloodMACAutoFDBCtrlTable.

swL2FloodMACAutoFDBEntry row .1.3.6.1.4.1.171.11.63.8.2.25.2.2.1

Information containing the discovered VLAN, MAC address and port of an Auto FDB entry.

Indexes

swL2FloodMACAutoFDBIPAddress

Column	Syntax	OID
swL2FloodMACAutoFDBVID The VLAN identifier of Auto FDB entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.63.8.2.25.2.2.1.1
swL2FloodMACAutoFDBMacAddress The MAC address of the Auto FDB entry.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.63.8.2.25.2.2.1.2
swL2FloodMACAutoFDBPort The port number of the Auto FDB entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.25.2.2.1.3
swL2FloodMACAutoFDBTimestamp A number that represents the relative time when the Auto FDB learned this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.8.2.25.2.2.1.4