DES3026-L2MGMT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
26
Rows
26
Columns
116
swL2PortInfoTable
table.1.3.6.1.4.1.171.11.63.3.2.2.1
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2PortInfoTable'
A table that contains information about every port.
A list of information for each port of the device.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortInfoPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.63.3.2.2.1.1.1 | ||||||||||||||||||||||||||
| swL2PortInfoLinkStatusThis object indicates the port link status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.1.1.4 | ||||||||||||||||||||||||||
| swL2PortInfoNwayStatusThis object indicates the port speed and duplex mode. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.1.1.5 |
swL2PortCtrlTable
table.1.3.6.1.4.1.171.11.63.3.2.2.2
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2PortCtrlTable'
A table that contains control information about every port.
A list of control information for each port of the device.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortCtrlPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.63.3.2.2.2.1.1 | ||||||||||||
| swL2PortCtrlAdminStateThis object decide the port enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.2.1.2 | ||||||||||||
| swL2PortCtrlNwayStateChose the port speed, duplex mode, and N-Way function mode. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.2.1.3 | ||||||||||||
| swL2PortCtrlFlowCtrlStateSet flow control function as enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.2.1.4 | ||||||||||||
| swL2PortCtrlDescriptionThe object describe the ports in text. | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.171.11.63.3.2.2.2.1.5 | ||||||||||||
| swL2PortCtrlMACNotifyStateThis object set each poet MAC notification state. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.2.1.7 | ||||||||||||
| swL2PortCtrlMDIXStateThis object controls the MDIX state of a specified port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.2.1.10 |
swL2PortErrTable
table.1.3.6.1.4.1.171.11.63.3.2.2.3
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortErrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2PortErrTable'
A table that contains information about Err port.
A list of information for err port of the device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2PortErrPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.63.3.2.2.3.1.1 | ||||
| swL2PortErrPortStateThis object decide the portstate enabled or disabled. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.3.1.2 | ||||
| swL2PortErrPortStatusThis object decide the PortStatus whether err-disabled. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.3.1.3 | ||||
| swL2PortErrPortReasonThis object decide the PortStatus STP LBD or Storm control. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.2.3.1.4 | ||||
| swL2PortErrDescriptionThe object describe the ports in text. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.171.11.63.3.2.2.3.1.5 |
.1.3.6.1.4.1.171.11.63.3.2.3.1
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOSBandwidthControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2QOSBandwidthControlTable'
.
A list of information contained in swL2QOSBandwidthControlTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOSBandwidthPortIndexIndicates the port . | Integer32 Constraints: range: 1-650 | .1.3.6.1.4.1.171.11.63.3.2.3.1.1.1 |
| swL2QOSBandwidthRxRateIndicates RX Rate(Kbit/sec) of the specifed port.Value 1024000 means no limit. | Integer32r/w Constraints: range: 64-1024000 | .1.3.6.1.4.1.171.11.63.3.2.3.1.1.2 |
| swL2QOSBandwidthTxRateIndicates TX Rate(Kbit/sec) of the specifed port.Value 1024000 means no limit. | Integer32r/w Constraints: range: 64-1024000 | .1.3.6.1.4.1.171.11.63.3.2.3.1.1.3 |
| swL2QOSBandwidthRadiusRxRateThe RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.63.3.2.3.1.1.4 |
| swL2QOSBandwidthRadiusTxRateThe TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.63.3.2.3.1.1.5 |
swL2QOSSchedulingTable
table.1.3.6.1.4.1.171.11.63.3.2.3.2
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOSSchedulingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2QOSSchedulingTable'
.
A list of information contained in swL2QOSSchedulingTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOSSchedulingClassIndexIndicates the hardware queue number. | Integer32 Constraints: range: 0-3 | .1.3.6.1.4.1.171.11.63.3.2.3.2.1.1 |
| swL2QOSSchedulingMaxWeight | Integer32r/w Constraints: range: 1-55 | .1.3.6.1.4.1.171.11.63.3.2.3.2.1.4 |
.1.3.6.1.4.1.171.11.63.3.2.3.3
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOS8021pUserPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2QOS8021pUserPriorityTable'
.
A list of information contained in swL2QOS8021pUserPriorityTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOS8021pUserPriorityIndexThe 802.1p user priority . | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.63.3.2.3.3.1.1 |
| swL2QOS8021pUserPriorityClassThe number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority). | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.171.11.63.3.2.3.3.1.2 |
.1.3.6.1.4.1.171.11.63.3.2.3.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOS8021pDefaultPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2QOS8021pDefaultPriorityTable'
.
A list of information contained in swL2QOS8021pDefaultPriorityTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOS8021pDefaultPriorityIndexIndicates the port number . | Integer32 Constraints: range: 1-650 | .1.3.6.1.4.1.171.11.63.3.2.3.4.1.1 |
| swL2QOS8021pDefaultPriorityThe priority value to assign to untagged packets received by the switch ports on the switch.. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.63.3.2.3.4.1.2 |
| swL2QOS8021pRadiusPriorityThe value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.63.3.2.3.4.1.3 |
swPortTrunkTable
table.1.3.6.1.4.1.171.11.63.3.2.4.3
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swPortTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swPortTrunkTable'
This table specifies the port membership for each logical link.
A list of information specifies which ports group form
a single logical link.
a single logical link.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swPortTrunkIndexThe index of logical port trunk. | Integer32 Constraints: range: 1-3 | .1.3.6.1.4.1.171.11.63.3.2.4.3.1.1 | ||||||||||||
| swPortTrunkMasterPortThe object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of t… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.63.3.2.4.3.1.2 | ||||||||||||
| swPortTrunkPortListIndicate member ports of a logical trunk. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.4.3.1.3 | ||||||||||||
| swPortTrunkTypeThis object indicates the type of this entry. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.4.3.1.4 | ||||||||||||
| swPortTrunkActivePortThis object indicates the active ports of this entry. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.4.3.1.5 | ||||||||||||
| swPortTrunkStateThis object indicates the status of this entry. when the state is CreatAndGo(4),the type of trunk is static(1); when the state is CreatAndWait(5),the type of trunk is lacp(2). | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.63.3.2.4.3.1.6 | ||||||||||||
| swPortTrunkFloodingPortThe flooding port of every trunk. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.63.3.2.4.3.1.7 |
swL2TrunkLACPPortTable
table.1.3.6.1.4.1.171.11.63.3.2.4.5
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkLACPPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2TrunkLACPPortTable'
This table specifys which ports group a set of ports(up to 8) into a single logical link.
A list of information specifies which ports group a set of
ports(up to 8) into a single logical link.
ports(up to 8) into a single logical link.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2TrunkLACPPortIndexThe index of logical port lacp. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.4.5.1.1 | ||||
| swL2TrunkLACPPortStateThe state of logical port lacp. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.4.5.1.2 |
swL2TrunkVLANTable
table.1.3.6.1.4.1.171.11.63.3.2.4.6
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2TrunkVLANTable'
This table is used to manage the VLAN trunking feature of the device.
This object is used to configure the VLAN trunking settings for each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2TrunkVLANPortThis object indicates the port being configured. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.4.6.1.1 | ||||
| swL2TrunkVLANStateThe state of the logical port LACP. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.4.6.1.2 |
swL2IGMPCtrlTable
table.1.3.6.1.4.1.171.11.63.3.2.7.3
·
1 row entry
·
12 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2IGMPCtrlTable'
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12.
The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2IGMPCtrlVidThis object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If … | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.3.1.1 | ||||||
| swL2IGMPQueryIntervalThe frequency at which IGMP Host-Query packets are transmitted on this switch. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.3.1.2 | ||||||
| swL2IGMPMaxResponseTimeThe maximum query response time on this switch. | Integer32r/w Constraints: range: 1-25 | .1.3.6.1.4.1.171.11.63.3.2.7.3.1.3 | ||||||
| swL2IGMPRobustnessThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. | Integer32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.63.3.2.7.3.1.4 | ||||||
| swL2IGMPLastMemberQueryIntervalThe Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.3.1.5 | ||||||
| swL2IGMPHostTimeoutThe timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please refere… | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.63.3.2.7.3.1.6 | ||||||
| swL2IGMPRouteTimeoutThe Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.63.3.2.7.3.1.7 | ||||||
| swL2IGMPLeaveTimerWhen a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left. | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.63.3.2.7.3.1.8 | ||||||
| swL2IGMPQueryStateThis object decide the IGMP query enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.7.3.1.9 | ||||||
| swL2IGMPCurrentStateThis object indicates the current IGMP query state. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.7.3.1.10 | ||||||
| swL2IGMPCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.7.3.1.11 | ||||||
| swL2IGMPFastLeave | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.7.3.1.12 |
swL2IGMPQueryInfoTable
table.1.3.6.1.4.1.171.11.63.3.2.7.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPQueryInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2IGMPQueryInfoTable'
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled.
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPInfoVidThis object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable). | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.4.1.1 |
| swL2IGMPInfoQueryCountThis object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.4.1.2 |
| swL2IGMPInfoTxQueryCountThis object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.4.1.3 |
swL2IGMPInfoTable
table.1.3.6.1.4.1.171.11.63.3.2.7.5
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2IGMPInfoTable'
The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
Information about current IGMP information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled.
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPVidThis object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.5.1.1 |
| swL2IGMPGroupIpAddrThis object is identify group ip address which is captured from IGMP packet, in per-Vlan basis. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.63.3.2.7.5.1.2 |
| swL2IGMPMacAddrThis object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis. | MacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.171.11.63.3.2.7.5.1.3 |
| swL2IGMPPortMapThis object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered p… | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.7.5.1.4 |
| swL2IGMPIpGroupReportCountThis object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.5.1.5 |
swL2IGMPRouterPortTable
table.1.3.6.1.4.1.171.11.63.3.2.7.6
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPRouterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2IGMPRouterPortTable'
The information of the router port table.
The entry of swL2IGMPRouterPortTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPRouterPortVlanidThis object indicates the vlan id of the router port entry. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.63.3.2.7.6.1.1 |
| swL2IGMPRouterPortVlanNameThis object indicates the vlan name of the router port entry. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.63.3.2.7.6.1.2 |
| swL2IGMPRouterPortStaticPortListThis object indicate the static portlist of the router port entry. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.7.6.1.3 |
| swL2IGMPRouterPortDynamicPortListThis object indicate the dynamic portlist of the router port entry. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.7.6.1.4 |
| swL2IGMPRouterPortForbiddenPortListThis object indicate the forbidden portlist of the router port entry. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.7.6.1.5 |
swL2IGMPAccessAuthTable
table.1.3.6.1.4.1.171.11.63.3.2.7.7
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPAccessAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2IGMPAccessAuthTable'
This table is used to manage the IGMP Access Authentication configurations of the device.
A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.
The configuration is done per port.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2IGMPAccessAuthPortThe index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.7.7.1.1 | ||||||
| swL2IGMPAccessAuthStateThis object denotes the status of IGMP Access Authentication of the port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.7.7.1.2 |
swL2TrafficCtrlTable
table.1.3.6.1.4.1.171.11.63.3.2.11.1
·
1 row entry
·
6 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrafficCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2TrafficCtrlTable'
This table specifys the storm traffic control configuration.
A list of information specifies the storm traffic control
configuration.
configuration.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2TrafficCtrlGroupIndexThe index of logical port trunk. The trunk group number depend on the existence of unit and module. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.11.1.1.1 | ||||||
| swL2TrafficCtrlUnitIndexIndicates ID of the unit in the device | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.11.1.1.2 | ||||||
| swL2TrafficCtrlBMStromthresholdThis object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlUcastStromCtrl objects whether is enabled) will ac… | Integer32r/w Constraints: range: 64-1024000 | .1.3.6.1.4.1.171.11.63.3.2.11.1.1.3 | ||||||
| swL2TrafficCtrlBcastStromCtrlThis object indicates broadcast storm control function is enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.11.1.1.4 | ||||||
| swL2TrafficCtrlMcastStromCtrlThis object indicates multicast storm control function is enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.11.1.1.5 | ||||||
| swL2TrafficCtrlUcastStromCtrlThis object indicates destination lookup fail function is enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.11.1.1.6 |
swL2TrafficSegTable
table.1.3.6.1.4.1.171.11.63.3.2.12.1
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrafficSegTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2TrafficSegTable'
This table specifys the port just can forward traffic to the specific port list.
A list of information specifies the port with its traffic
forward list.
forward list.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2TrafficSegPortThe port number of the logical port. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.63.3.2.12.1.1.1 |
| swL2TrafficSegForwardPortsThe port list that the specific port can forward traffic. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.12.1.1.2 |
.1.3.6.1.4.1.171.11.63.3.2.15.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortSecurityControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2PortSecurityControlTable'
port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as static entry. When the learned addresses number reach N, any coming packet with not learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port.
A list of information contained in swL2PortSecurityControlTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortSecurityPortIndexIndicates the secured port to lock address learning. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.63.3.2.15.1.1.1 | ||||||||
| swL2PortSecurityMaxLernAddrIndicates allowable number of addresses to be learned at this port. | Integer32r/w Constraints: range: 0-10 | .1.3.6.1.4.1.171.11.63.3.2.15.1.1.2 | ||||||||
| swL2PortSecurityModeIndicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.15.1.1.3 | ||||||||
| swL2PortSecurityAdmStateIndicates administration state of locking address. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.15.1.1.4 |
swL2StpPortTable
table.1.3.6.1.4.1.171.11.63.3.2.16.4
·
1 row entry
·
16 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2StpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2StpPortTable'
A table that contains port-specific information for the Spanning Tree Protocol.
A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.
about the Spanning Tree Protocol state for that
port.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2StpPortThe port number of the port for this entry. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.63.3.2.16.4.1.1 | ||||||||||||||||||||||||||
swL2StpPortLbdobsolete The enabled/disabled status is used to Loop-back prevention attachedto this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.16.4.1.2 | ||||||||||||||||||||||||||
| swL2StpPortStatusWhen the port Enable state is enabled, the port's current state as defined by application of the Spanning Tree Protocol. If the PortEnable is disabled, the the port status will be no-stp-enabled(7). If the port is in … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.16.4.1.3 | ||||||||||||||||||||||||||
| swL2StpPortRoleWhen the port Enable state is enabled, the port's current port role as defined by application of the Spanning Tree Protocol. If the Port Enable state is disabled, the the port role will be nonstp(7). If the port is in… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.16.4.1.4 | ||||||||||||||||||||||||||
| swL2StpPortFBPDUThe enabled/disabled status is used to BPDU Filtering attached to this port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.16.4.1.5 | ||||||||||||||||||||||||||
| swL2StpPortLinkStateThis object indicates the stp port speed and duplex mode. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.16.4.1.6 | ||||||||||||||||||||||||||
| swL2StpPortProtocolMigrationWhen operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.171.11.63.3.2.16.4.1.7 | ||||||||||||||||||||||||||
| swL2StpPortAdminEdgePortThe administrative value of the Edge Port parameter. A value of TRUE(0) indicates that this port should be assumed as an edge-port and a value of FALSE(1) indicates that this port should be assumed as a non-edge-port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.16.4.1.8 | ||||||||||||||||||||||||||
| swL2StpPortOperEdgePortThe operational value of the Edge Port parameter. The object is initialized to the value of swL2StpPortAdminEdgePort and is set FALSE on reception of a BPDU. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.171.11.63.3.2.16.4.1.9 | ||||||||||||||||||||||||||
| swL2StpPortAdminPointToPointThe administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.16.4.1.10 | ||||||||||||||||||||||||||
| swL2StpPortOperPointToPointThe operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-det… | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.171.11.63.3.2.16.4.1.11 | ||||||||||||||||||||||||||
| swL2StpPortAdminPathCostThe administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cos… | Unsigned32r/w Constraints: range: 0-200000000 | .1.3.6.1.4.1.171.11.63.3.2.16.4.1.12 | ||||||||||||||||||||||||||
| swL2StpPortPriorityThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of swL2StpPort. | Integer32r/w Constraints: range: 0-240 | .1.3.6.1.4.1.171.11.63.3.2.16.4.1.13 | ||||||||||||||||||||||||||
| swL2STPPortStateThe enabled/disabled status is usedoop-back prevention attached to this port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.16.4.1.14 | ||||||||||||||||||||||||||
| swL2StpPortRestrictedRoleIf TRUE causes the port not to be selected as Root Port, even it has the best spanning tree priotiry vector. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.171.11.63.3.2.16.4.1.15 | ||||||||||||||||||||||||||
| swL2StpPortRestrictedTCNIf TRUE causes the port not to propagate received topology change notifications and topology changes to other Ports. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.171.11.63.3.2.16.4.1.16 |
swL2CosPriorityTable
table.1.3.6.1.4.1.171.11.63.3.2.17.3.1
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2CosPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2CosPriorityTable'
Used to show and config per port priority-based QoS features on the switch
A list of information contained in swL2CosPriorityTable.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2CosPriorityPortThe port number of CoS Priority. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.63.3.2.17.3.1.1.1 | ||||||
| swL2CosPriorityPortPRIIndicates port_priority state for CoS. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.17.3.1.1.2 | ||||||
| swL2CosPriorityEtherPRIEnable Ethernet frame based priority. When set ether8021p(2), enable 802.1p QoS; When set macBase(3), enable MAC-based QoS; When set disable(1), disable Ethernet frame based priority. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.17.3.1.1.3 | ||||||
| swL2CosPriorityIpPRIEnable IP priority QoS. When set tos(2), enable TOS based QoS; When set dscp(3), enable DSCP based QoS; When set disable(1), disable IP priority QoS. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.17.3.1.1.4 | ||||||
| swL2CosPriorityNonewhen read,it always return invalid(2); when write valid(1),it disables all priority in this table. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.17.3.1.1.5 |
swL2CosPortPRITable
table.1.3.6.1.4.1.171.11.63.3.2.17.3.2
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2CosPortPRITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2CosPortPRITable'
Used to show port-to-class mappings and map specific port to one of the hardware queues available on the switch.
A list of information contained in swL2CosPortPRITable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2CosPortPRIIndexIndicates CoS Priority PortPRI. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.63.3.2.17.3.2.1.1 |
| swL2CosPortPRIClassThe number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, Y… | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.171.11.63.3.2.17.3.2.1.2 |
swL2CosMacBasePRITable
table.1.3.6.1.4.1.171.11.63.3.2.17.3.3
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2CosMacBasePRITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2CosMacBasePRITable'
Used to show MAC priority map to traffic class and map the destination MAC address in incoming packet to one of the hardware queues available on the switch.
A list of information contained in swL2CosMacBasePRITable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2CosMacBasePRIIndexIndicates CoS Priority MacBasePRI. | MacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.171.11.63.3.2.17.3.3.1.1 |
| swL2CosMacBasePRIClassThe number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, Y… | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.171.11.63.3.2.17.3.3.1.2 |
swL2CosTosPRITable
table.1.3.6.1.4.1.171.11.63.3.2.17.3.4
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2CosTosPRITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2CosTosPRITable'
Used to show TOS value to traffic class mapping and map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch.
A list of information contained in swL2CosTosPRITable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2CosTosPRIIndexIndicates CoS Priority TosPRI. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.63.3.2.17.3.4.1.1 |
| swL2CosTosPRIClassThe number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, Y… | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.171.11.63.3.2.17.3.4.1.2 |
swL2CosDscpPRITable
table.1.3.6.1.4.1.171.11.63.3.2.17.3.5
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2CosDscpPRITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2CosDscpPRITable'
Used to show DSCP value to traffic class mapping and map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch.
A list of information contained in swL2CosDscpPRITable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2CosDscpPRIIndexIndicates CoS Priority DscpPRI. | Integer32 Constraints: range: 0-63 | .1.3.6.1.4.1.171.11.63.3.2.17.3.5.1.1 |
| swL2CosDscpPRIClassThe number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, Y… | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.171.11.63.3.2.17.3.5.1.2 |
swL2LoopDetectPortTable
table.1.3.6.1.4.1.171.11.63.3.2.18.2.1
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2LoopDetectPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2LoopDetectPortTable'
The table specifies the loopback detection function specified by port.
The table specifies the loopback detection function specified by port.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2LoopDetectPortIndexThis object indicates the module's port number. The range is from 1 to the maximum port number specified in the module | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.63.3.2.18.2.1.1.1 | ||||||
| swL2LoopDetectPortStateThis object indicates the loopback detection function state on the port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.18.2.1.1.2 | ||||||
| swL2LoopDetectPortLoopStatusThis object indicates the port status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.18.2.1.1.4 |
swL2VlanTable
table.1.3.6.1.4.1.171.11.63.3.2.19.1
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2VlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DES3026-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DES3026-L2MGMT-MIB::swL2VlanTable'
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Static information for a VLAN configured into the
device by (local or network) management.
device by (local or network) management.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2VlanIndexThe VLAN ID of the VLAN to be created. The range is 1 - 4094. | VlanId Type Constraints: range: 1..4094 | .1.3.6.1.4.1.171.11.63.3.2.19.1.1.1 | ||||
| swL2VlanNameThe name of the VLAN to be displayed. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.63.3.2.19.1.1.2 | ||||
| swL2VlanTypeThe type of the VLAN to be displayed. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.63.3.2.19.1.1.3 | ||||
| swL2VlanMemberPortsA range of member ports to the VLAN. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.19.1.1.4 | ||||
| swL2VlanStaticPortsA range of static ports to the VLAN. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.19.1.1.5 | ||||
| swL2VlanUntaggedPortsSpecifies the additional ports as untagged. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.19.1.1.6 | ||||
| swL2VlanTaggedPortsSpecifies the additional ports as tagged. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.63.3.2.19.1.1.7 |