DELL-NETWORKING-DCB-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
44
.1.3.6.1.4.1.6027.3.15.2.1
·
1 row entry
·
3 columns
Uses the dell variant from
Command help
/opt/observium/mibs/dell.
Walk dellNetDcbPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-NETWORKING-DCB-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-NETWORKING-DCB-MIB::dellNetDcbPortTable'
Port table contains the DCB features (Enhanced Transmission Selection/Priortiy Based Flow Control) status (enabled or disabled).
An entry containing DCB control parameters for a particular port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
dellNetDcbPortNumberobsolete This indicates the interface identifier for which the Dcb configuration is applied. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.6027.3.15.2.1.1.1 | ||||
dellNetDcbETSAdminStatusobsolete This object is used to display if ETS feature is enabled or disabled on the given port. | EnabledStatus Type Values:
| .1.3.6.1.4.1.6027.3.15.2.1.1.2 | ||||
dellNetDcbPFCAdminStatusobsolete This object is used to display if PFC feature isenabled or disabled on the given port. | EnabledStatus Type Values:
| .1.3.6.1.4.1.6027.3.15.2.1.1.3 |
dellNetDCBXPortTable
table.1.3.6.1.4.1.6027.3.15.3.1.2
·
1 row entry
·
6 columns
Uses the dell variant from
Command help
/opt/observium/mibs/dell.
Walk dellNetDCBXPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-NETWORKING-DCB-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-NETWORKING-DCB-MIB::dellNetDCBXPortTable'
Port table contains the DCBX feature status (enabled or disabled).
An entry containing DCBX control parameters for a particular port.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dellNetDCBXPortNumberThis indicates the interface identifier for which the DCBX configuration is applied. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.6027.3.15.3.1.2.1.1 | ||||||||||
| dellNetDCBXAdminStatusThis object is used to display if DCBX feature is enabled(1) or disabled(2) on the given port. | EnabledStatus Type Values:
| .1.3.6.1.4.1.6027.3.15.3.1.2.1.2 | ||||||||||
| dellNetDCBXAutoCfgPortRolePorts operating in the manual role do not have their configuration affected by peer devices or by internal propagation of configuration. These ports will advertise their configuration to their peer if DCBX is enabled… | DcbxPortRoler/w Type Values:
| .1.3.6.1.4.1.6027.3.15.3.1.2.1.3 | ||||||||||
| dellNetDCBXPortVersionCIN is Cisco Intel Nuova DCBX (version 1.0). CEE is converged enhanced ethernet DCBX (version 1.06). IEEE is 802-1 az version. The default value is auto. DCBX supports the legacy implementations v1.0 (C… | DcbxVersionr/w Type Values:
| .1.3.6.1.4.1.6027.3.15.3.1.2.1.4 | ||||||||||
| dellNetDCBXPortSupportedTLVsBitmap that includes the supported set of DCBX LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Having the bit 'pfc(0)' set indicates tha… | Bits Enumerated Values:
| .1.3.6.1.4.1.6027.3.15.3.1.2.1.5 | ||||||||||
| dellNetDCBXPortConfigTLVsTxEnableBitmap that includes the DCBX defined set of LLDP TLVs whose transmission is enabled on the local LLDP agent by network management. Having the bit 'pfc(0)' set indicates that the LLDP transmit PFC TLV as… | Bitsr/w Enumerated Values:
| .1.3.6.1.4.1.6027.3.15.3.1.2.1.6 |
.1.3.6.1.4.1.6027.3.15.3.1.3
·
1 row entry
·
14 columns
Uses the dell variant from
Command help
/opt/observium/mibs/dell.
Walk dellNetDCBXPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-NETWORKING-DCB-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-NETWORKING-DCB-MIB::dellNetDCBXPortStatusTable'
.
.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| dellNetDCBXPortOperVersionSpecifies the DCBX mode in which the interface is currently operating. | DcbxVersion Type Values:
| .1.3.6.1.4.1.6027.3.15.3.1.3.1.2 | ||||||||
| dellNetDCBXPortPeerMACaddressMAC Address of the DCBX peer. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.6027.3.15.3.1.3.1.3 | ||||||||
| dellNetDCBXPortCfgSourceIndicates if this port is the source of configuration information for auto-* ports. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6027.3.15.3.1.3.1.4 | ||||||||
| dellNetDCBXOperStatusThis object gives information on the operational status of DCBX on the given port. Enabled(1) indicates DCBX on the port is in sync with the remote and is operationally up. Disabled(2) indicates DCBX on the port is ope… | EnabledStatus Type Values:
| .1.3.6.1.4.1.6027.3.15.3.1.3.1.5 | ||||||||
| dellNetDCBXPortMultiplePeerCountIndicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.6 | ||||||||
| dellNetDCBXPortPeerRemovedCount. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.7 | ||||||||
| dellNetDCBXPortPeerOperVersionNumSpecifies the operational version of the peer DCBX device. Valid only when peer device is a CEE/CIN DCBX device. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.8 | ||||||||
| dellNetDCBXPortPeerMaxVersionSpecifies the max version of the peer DCBX device. Valid only when peer device is CEE/CIN DCBX device. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.9 | ||||||||
| dellNetDCBXPortSeqNumSpecifies the current sequence number that is sent in DCBX control TLVs in CEE/CIN Mode. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.10 | ||||||||
| dellNetDCBXPortAckNumSpecifies the current ACK number that is to be sent to peer in DCBX control TLVs in CEE/CIN Mode. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.11 | ||||||||
| dellNetDCBXPortPeerRcvdAckNumSpecifies the current ACK number that is sent by peer in DCBX control TLV in CEE/CIN Mode. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.12 | ||||||||
| dellNetDCBXPortTxCountThe number of DCBX frames transmitted per interface. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.13 | ||||||||
| dellNetDCBXPortRxCountThe number of DCBX frames received per interface. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.14 | ||||||||
| dellNetDCBXPortErrorFramesCountThe number of DCBX frames discarded due to errors in the frame. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.1.3.1.15 |
dellNetETSPortTable
table.1.3.6.1.4.1.6027.3.15.3.2.2
·
1 row entry
·
12 columns
Uses the dell variant from
Command help
/opt/observium/mibs/dell.
Walk dellNetETSPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-NETWORKING-DCB-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-NETWORKING-DCB-MIB::dellNetETSPortTable'
ETS Port table contains the ETS (Enhanced Transmission Selection) features
information specific to this port.
An entry created in this table in the following tables in the standard
DCBX Mib for this port.
lldpXdot1dcbxConfigTCSupportedTable,
lldpXdot1dcbxConfigETSConfigurationTable,
lldpXdot1dcbxConfigETSRecommendationTable,
lldpXdot1dcbxLocTCSupportedTable,
lldpXdot1dcbxLocETSBasicConfigurationTable,
lldpXdot1dcbxLocETSConPriorityAssignmentTable,
lldpXdot1dcbxLocETSRecommendationTable,
lldpXdot1dcbxAdminTCSupportedTable,
lldpXdot1dcbxAdminETSBasicConfigurationTable,
lldpXdot1dcbxAdminETSConPriorityAssignmentTable,
lldpXdot1dcbxAdminETSRecommendationTable.
Deletion of entry in this table deletes all the entries in the above tables
in the standatd DCBX mib for this port.
An entry containing ETS control parameters and ETS information
for a particular port.
for a particular port.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| dellNetETSPortNumberThis indicates the interface identifier for which the ETS configuration is applied. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.6027.3.15.3.2.2.1.1 | ||||||||
| dellNetETSAdminModeThis object is used to display the Admin mode for ETS feature on the given port. If the mode is 'on(1)',ETS feature is enabled on this port. ETS configurations, either from this system or the remote syst… | DcbAdminMode Type Values:
| .1.3.6.1.4.1.6027.3.15.3.2.2.1.2 | ||||||||
| dellNetETSDcbxOperStateThis object is used to display the current state of the DCBX state machine for the ETS feature on the given port. If state is Off '(0)', then ETS Operational(local) parameters will be same as ETS Admin Co… | DcbState Type Values:
| .1.3.6.1.4.1.6027.3.15.3.2.2.1.3 | ||||||||
| dellNetETSDcbxStateMachineThis object is used to display the DCBX state machine type that is used by the ETS feature on the given port. | DcbStateMachineType Type Values:
| .1.3.6.1.4.1.6027.3.15.3.2.2.1.4 | ||||||||
| dellNetETSOperStatusThis object gives information on the operational status of ETS on the given port. Enabled(1) indicates ETS on the port is in sync with the remote and is operationally up. Disabled(2) indicates ETS on the port is operati… | EnabledStatus Type Values:
| .1.3.6.1.4.1.6027.3.15.3.2.2.1.5 | ||||||||
| dellNetETSClearTLVCountersThis object when set to TRUE, clears the following counters associated with a Port: dellNetETSConfTxTLVCounter, dellNetETSConfRxTLVCounter, dellNetETSConfRxTLVErrors, dellNetETSRecoTxTLVCounter, de… | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.6027.3.15.3.2.2.1.6 | ||||||||
| dellNetETSConfTxTLVCounterThis object is used to keep track of the number of ETS configuration TLV that are transmitted from this port. This counter will be incremented every time when there is ETS Configuration TLV is generated and transmitt… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.2.2.1.7 | ||||||||
| dellNetETSConfRxTLVCounterThis object is used to keep track of the number of ETS ConfigurationTLV that are received in this port. This counter will be incremented every time when there is ETS Configuration TLV is received from the LLDP. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.2.2.1.8 | ||||||||
| dellNetETSConfRxTLVErrorsThis object is used to keep track of number of malformed ETS Conf TLVs received by ETS. This counter will be incremented every time a ETS Conf TLV is dropped by ETS. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.2.2.1.9 | ||||||||
| dellNetETSRecoTxTLVCounterThis object is used to keep track of the number of ETS Recommendation TLV that are transmitted from this port. This counter will be incremented every time when there is ETS Recommendation TLV is generated and transmi… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.2.2.1.10 | ||||||||
| dellNetETSRecoRxTLVCounterThis object is used to keep track of the number of ETS Recommendation TLV that are received in this port. This counter will be incremented every time when there is ETS Recommendation TLV is received from the LLDP. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.2.2.1.11 | ||||||||
| dellNetETSRecoRxTLVErrorsThis object is used to keep track of number of malformed ETS Reco TLVs received by ETS. This counter will be incremented every time a ETS Reco TLV is dropped by ETS. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.2.2.1.12 |
dellNetPFCPortTable
table.1.3.6.1.4.1.6027.3.15.3.3.2
·
1 row entry
·
9 columns
Uses the dell variant from
Command help
/opt/observium/mibs/dell.
Walk dellNetPFCPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-NETWORKING-DCB-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-NETWORKING-DCB-MIB::dellNetPFCPortTable'
PFC Port table contains the PFC (Priortiy Based Flow Control) features
information specific to this port.
An entry created in the port table populates the entry in this table and
in the following tables in the standard DCBX Mib for this port.
lldpXdot1dcbxConfigPFCTable,
lldpXdot1dcbxLocPFCBasicTable,
lldpXdot1dcbxLocPFCEnableTable,
lldpXdot1dcbxAdminPFCBasicTable,
lldpXdot1dcbxAdminPFCEnableTable.
Deletion of entry in the port table deletes the entry in this table and
all the entries in the above tables in the standatd DCBX mib for this port.
An entry containing PFC control parameters and PFC information
for a particular port.
for a particular port.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| dellNetPFCPortNumberThis indicates the interface identifier for which the PFC configuration is applied. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.6027.3.15.3.3.2.1.1 | ||||||||
| dellNetPFCAdminModeThis object is used to display Admin mode for PFC feature on the given port. If mode is 'on(1)',PFC feature is enabled on this port. PFC configurations, either from this system or the remote system will t… | DcbAdminMode Type Values:
| .1.3.6.1.4.1.6027.3.15.3.3.2.1.2 | ||||||||
| dellNetPFCDcbxOperStateThis object is used to display the current state of the DCBX state machine for the PFC feature on the given port. If state is Off '(0)', then PFC Operational(local) parameters will be same as PFC Admin Co… | DcbState Type Values:
| .1.3.6.1.4.1.6027.3.15.3.3.2.1.3 | ||||||||
| dellNetPFCDcbxStateMachineThis object is used to display the DCBX state machine type that is used by the PFC feature on the given port. | DcbStateMachineType Type Values:
| .1.3.6.1.4.1.6027.3.15.3.3.2.1.4 | ||||||||
| dellNetPFCOperStatusThis object gives information on the operational status of PFC on the given port. Enabled(1) indicates PFC on the port is in sync with the remote and is operationally up. Disabled(2) indicates PFC on the port is operati… | EnabledStatus Type Values:
| .1.3.6.1.4.1.6027.3.15.3.3.2.1.5 | ||||||||
| dellNetPFCClearTLVCountersThis object when set to TRUE, clears the following counters associated with a Port: dellNetPFCTxTLVCounter, dellNetPFCRxTLVCounter, dellNetPFCRxTLVErrors. Setting this object to FALSE has no e… | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.6027.3.15.3.3.2.1.6 | ||||||||
| dellNetPFCTxTLVCounterThis object is used to keep track of the number of PFC TLV that are transmitted from this port. This counter will be incremented every time when there is PFC TLV is generated and transmitted to the LLDP. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.3.2.1.7 | ||||||||
| dellNetPFCRxTLVCounterThis object is used to keep track of the number of PFC TLV that are received in this port. This counter will be incremented every time when there is PFC TLV is received from the LLDP. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.3.2.1.8 | ||||||||
| dellNetPFCRxTLVErrorsThis object is used to keep track of number of malformed TLVs received by PFC. This counter will be incremented every time a PFC-TLV is dropped by PFC. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6027.3.15.3.3.2.1.9 |