DCP-INTERFACE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
84

dcpInterfaceTable

table
.1.3.6.1.4.1.30826.2.2.1.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the smartoptics variant from /opt/observium/mibs/smartoptics.
Command help
Walk dcpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCP-INTERFACE-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCP-INTERFACE-MIB::dcpInterfaceTable' 
A table with all optical interfaces of the system.
dcpInterfaceEntry row .1.3.6.1.4.1.30826.2.2.1.1.1.1
Description.
Indexes
Column Syntax OID
dcpInterfaceIndex
Interface Index in the following format:
csiixy where

c: chassis.
s: slot number.
ii: Interface number.
x: 1 = line, 2 = client.
y: 0 = tx+rx port, 1 = tx port, 2 = rx port.

For DCP-M produ…
Unsigned32
Constraints:
range: 1-10000000
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.1
dcpInterfaceName
The interface name. If no interface this value is empty.
if-c/s/i where c = chassis, s = slot, i = interface
or
if-c/channelid where c = chassis.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.2
dcpInterfaceRxPower
The optical power received at the Rx port in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.3
dcpInterfaceTxPower
The optical power transmitted at the Tx port in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.4
dcpInterfaceStatus
The operational state for a port.

idle - The port is not activated.

down - The port traffic is lost.

up - There is traffic on the port.
SO-TC-MIBInterfaceStatus
Type Values:
1idle
2down
3up
Description:
The operational state for a port, interface or optical channel.

idle - The port, interface or optical channel is not activated.

down - The port, interface or optical channel traffic is lost.
…
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.5
dcpInterfaceAlarm
The highest alarm severity of the interface.
SO-TC-MIBItuPerceivedSeverity
Type Values:
1cleared
2indeterminate
3critical
4major
5minor
6warning
Description:
ITU perceived severity values
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.6
dcpInterfaceFormat
The traffic format of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.7
dcpInterfaceWavelength
The ITU channel wavelength.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.8
dcpInterfaceChannelId
DWDM or CWDM channel identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.9
dcpInterfaceDescription
User configurable description string for the interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.10
dcpInterfacePortType
Port type of the interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.11
dcpInterfacePortMode
Interface portmode.
SO-TC-MIBInterfacePortMode
Type Values:
1na
2localAD
3xc1
4xc2
5xc3
6xc4Wss1
7xc4Wss2
8xc4Wss3
9xc4Wss4
10xc4Wss5
11xc4
12xc5
13xc6
14xc7
15xc8
16xc9
17xc10
18xc11
19xc12
20xc13
21xc14
22xc15
23xc16
24xc17
25xc18
26xc19
27xc20
28xc21
29xc22
30xc23
31xc24
32xc25
33xc26
34xc27
35xc28
36xc29
37xc30
38xc31
39xc32
40xc33
41xc34
100off
Description:
The interface port mode for a service.
na - Not applicable.
localAD - The service is added to the chosen channel on the local Add/drop ports.
xc1 - The service is added to the cross connect port XC1.
...
xc34 - The serv…
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.12
dcpInterfaceOsnr
Interface OSNR, zero indicates NA.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.13
dcpInterfaceRemoteOsnr
Remote Interface OSNR, zero indicates NA.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.1.1.1.14

dcpInterfaceTrxTable

table
.1.3.6.1.4.1.30826.2.2.1.3.1 · 1 row entry · 37 columns
Open in standard view
Uses the smartoptics variant from /opt/observium/mibs/smartoptics.
Command help
Walk dcpInterfaceTrxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCP-INTERFACE-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCP-INTERFACE-MIB::dcpInterfaceTrxTable' 
A table with all optical interfaces of the system.
dcpInterfaceTrxEntry row .1.3.6.1.4.1.30826.2.2.1.3.1.1
Description.
Indexes
Column Syntax OID
dcpInterfaceTrxIndex
Interface Index in the following format:
csiixy where
c: chassis.
s: slot number.
ii: Interface number.
x: 1 = line, 2 = client.
y: 0 = tx+rx port, 1 = tx port, 2 = rx port.
For DCP-M products Slot is always 0.
Same Ind…
Unsigned32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.1
dcpInterfaceTrxName
The interface name. If no interface this value is empty.
if-c/s/i where c = chassis, s = slot, i = interface
or
if-c/channelid where c = chassis.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.2
dcpInterfaceTrxLanes
Number of lanes for the interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.3
dcpInterfaceTrxTemperature
The transceiver temperature in units of 0.1 C.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.4
dcpInterfaceTrxTemperatureHighWarningThreshold
The high warning temperature alarm threshold in units of 0.1 C.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.5
dcpInterfaceTrxTemperatureHighAlarmThreshold
The high warning temperature alarm threshold in units of 0.1 C.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.6
dcpInterfaceTrxWavelength
The ITU channel wavelength in units of nm.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.7
dcpInterfaceTrxChannelId
DWDM or CWDM channel identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.8
dcpInterfaceTrxActualFrequency
The actual frequency used by the transciever in units of 0.1 THz.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.9
dcpInterfaceTrxWantedFrequency
The wanted frequency used by the transciever in units of 0.1 THz.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.10
dcpInterfaceTrxGridSpacing
The grid space used by the transceiver in units of 0.1 GHz.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.11
dcpInterfaceTrxTotalRxPower
The total rx power measured by the transceiver lane in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.12
dcpInterfaceTrxSignalRxPower
The total signal rx power measured by the transceiver lane in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.13
dcpInterfaceTrxTxPower
The tx power transmitted by the transceiver lane in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.14
dcpInterfaceTrxTxBias
The tx bias current measured by the transceiver lane in units of 0.1 mA.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.15
dcpInterfaceTrxRxSensitivity
The rx sensitivity level for the transceiver lane in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.16
dcpInterfaceTrxRxLosThreshold
The rx LOS threshold for the transceiver lane in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.17
dcpInterfaceTrxModulationType
The modulation type used by the transceiver.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.18
dcpInterfaceTrxBandwidth
The bandwidth used by the transceiver lane in units of Gb/s.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.19
dcpInterfaceTrxFec
The FEC used by the transceiver.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.20
dcpInterfaceTrxPulseShaping
Shows if Pulse Shaping is enabled or disabled for the transceiver.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.21
dcpInterfaceTrxCertified
Indicates if the transceiver is certified or not.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.22
dcpInterfaceTrxOsnr
The OSNR measured by the transceiver lane in units of 0.1 dB.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.23
dcpInterfaceTrxChromaticDispersion
The Chromatic Dispersion measured by the transceiver in units of ps/nm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.24
dcpInterfaceTrxDiffGroupDelay
The Diff Group Delay measured by the transceiver in units of ps.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.25
dcpInterfaceTrxPolarizationDependentLoss
The Polarization Dependent Loss measured by the transceiver in units of 0.1 dB.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.26
dcpInterfaceTrxPreFecBerMantissa
The Mantissa for the Pre FEC BER measured by the transceiver.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.27
dcpInterfaceTrxPreFecBerExponent
The Exponent for the Pre FEC BER measured by the transceiver.
Integer32
Constraints:
range: -30-0
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.28
dcpInterfaceTrxPreFecBerAvgMantissa
The Mantissa for the Pre FEC BER Average measured by the transceiver.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.29
dcpInterfaceTrxPreFecBerAvgExponent
The Exponent for the Pre FEC BER Average measured by the transceiver.
Integer32
Constraints:
range: -30-0
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.30
dcpInterfaceTrxUncorrectedBerMantissa
The Mantissa for the Uncorrected BER measured by the transceiver.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.31
dcpInterfaceTrxUncorrectedBerExponent
The Exponent for the Uncorrected BER measured by the transceiver.
Integer32
Constraints:
range: -30-0
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.32
dcpInterfaceTrxPostFecBerMantissa
The Mantissa for the Post FEC BER measured by the transceiver.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.33
dcpInterfaceTrxPostFecBerExponent
The Exponent for the Post FEC BER measured by the transceiver.
Integer32
Constraints:
range: -30-0
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.34
dcpInterfaceTrxQvalue
The Q value measured by the transceiver in units of 0.1 dBQ.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.35
dcpInterfaceTrxQmargin
The Q margin measured by the transceiver in units of dBQ.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.36
dcpInterfaceTrxStateOfPolarizationROC
Description.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.30826.2.2.1.3.1.1.37

dcpInterfaceTrxLanesTable

table
.1.3.6.1.4.1.30826.2.2.1.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the smartoptics variant from /opt/observium/mibs/smartoptics.
Command help
Walk dcpInterfaceTrxLanesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCP-INTERFACE-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCP-INTERFACE-MIB::dcpInterfaceTrxLanesTable' 
A table with all optical interfaces of the system.
dcpInterfaceTrxLanesEntry row .1.3.6.1.4.1.30826.2.2.1.4.1.1
Description.
Indexes
Column Syntax OID
dcpInterfaceTrxLanesIndex
Interface Index in the following format:
csiill where

c: chassis.
s: slot number.
ii: interface number.
ll: lane number.
Unsigned32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.30826.2.2.1.4.1.1.1
dcpInterfaceTrxLanesName
The interface name. If no interface this value is empty.
if-c/s/i where c = chassis, s = slot, i = interface
or
if-c/channelid where c = chassis.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.4.1.1.2
dcpInterfaceTrxLanesRxPower
The optical power received at the Rx port for the lane in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.4.1.1.3
dcpInterfaceTrxLanesTxPower
The optical power transmitted at the Tx port for the lane in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.4.1.1.4
dcpInterfaceTrxLanesRxSensitivity
The Rx sensitivity for the lane in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.4.1.1.5
dcpInterfaceTrxLanesTxBias
The Tx Bias for the lane in units of 0.1 mA.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.4.1.1.6

dcpInterfaceFlexgridTable

table
.1.3.6.1.4.1.30826.2.2.1.5.1 · 1 row entry · 12 columns
Open in standard view
Uses the smartoptics variant from /opt/observium/mibs/smartoptics.
Command help
Walk dcpInterfaceFlexgridTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCP-INTERFACE-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCP-INTERFACE-MIB::dcpInterfaceFlexgridTable' 
A table with all optical interfaces of the system.
dcpInterfaceFlexgridEntry row .1.3.6.1.4.1.30826.2.2.1.5.1.1
Description.
Indexes
Column Syntax OID
dcpInterfaceFlexgridIndex
Interface Index in the following format:
csiixy where

c: chassis.
s: slot number.
ii: Interface number.
x: 1 = line, 2 = client.
y: 0 = tx+rx port, 1 = tx port, 2 = rx port.

For DCP-M produ…
Unsigned32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.1
dcpInterfaceFlexgridName
The interface name. If no interface this value is empty.
if-c/s/i where c = chassis, s = slot, i = interface
or
if-c/channelid where c = chassis.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.2
dcpInterfaceFlexgridRxPower
The optical power received at the Rx port in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.3
dcpInterfaceFlexgridTxPower
The optical power transmitted at the Tx port in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.4
dcpInterfaceFlexgridStatus
The operational state for a port.

idle - The port is not activated.

down - The port traffic is lost.

up - There is traffic on the port.
SO-TC-MIBInterfaceStatus
Type Values:
1idle
2down
3up
Description:
The operational state for a port, interface or optical channel.

idle - The port, interface or optical channel is not activated.

down - The port, interface or optical channel traffic is lost.
…
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.5
dcpInterfaceFlexgridAlarm
The highest alarm severity of the interface.
SO-TC-MIBItuPerceivedSeverity
Type Values:
1cleared
2indeterminate
3critical
4major
5minor
6warning
Description:
ITU perceived severity values
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.6
dcpInterfaceFlexgridFormat
The traffic format of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.7
dcpInterfaceFlexgridWavelength
The ITU channel wavelength.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.8
dcpInterfaceFlexgridChannelId
DWDM channel identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.9
dcpInterfaceFlexgridDescription
User configurable description string for the interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.10
dcpInterfaceFlexgridPortType
Port type of the interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.11
dcpInterfaceFlexgridPortMode
Interface portmode.
SO-TC-MIBInterfacePortMode
Type Values:
1na
2localAD
3xc1
4xc2
5xc3
6xc4Wss1
7xc4Wss2
8xc4Wss3
9xc4Wss4
10xc4Wss5
11xc4
12xc5
13xc6
14xc7
15xc8
16xc9
17xc10
18xc11
19xc12
20xc13
21xc14
22xc15
23xc16
24xc17
25xc18
26xc19
27xc20
28xc21
29xc22
30xc23
31xc24
32xc25
33xc26
34xc27
35xc28
36xc29
37xc30
38xc31
39xc32
40xc33
41xc34
100off
Description:
The interface port mode for a service.
na - Not applicable.
localAD - The service is added to the chosen channel on the local Add/drop ports.
xc1 - The service is added to the cross connect port XC1.
...
xc34 - The serv…
 .1.3.6.1.4.1.30826.2.2.1.5.1.1.12

dcpInterfaceDeTable

table
.1.3.6.1.4.1.30826.2.2.1.6.1 · 1 row entry · 15 columns
Open in standard view
Uses the smartoptics variant from /opt/observium/mibs/smartoptics.
Command help
Walk dcpInterfaceDeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCP-INTERFACE-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCP-INTERFACE-MIB::dcpInterfaceDeTable' 
A table with all DE channels of the system.
dcpInterfaceDeEntry row .1.3.6.1.4.1.30826.2.2.1.6.1.1
Description.
Indexes
Column Syntax OID
dcpInterfaceDeIndex
Interface Index in the following format:
csiixy
where
c: chassis (always 1 for DCP-M).
s: slot number (always 0 for DCP-M).
ii: interface number (sequential).
x: 1 = line, 2 = client.
y: 1 = tx port, 2 = rx port.
Unsigned32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.1
dcpInterfaceDeName
The interface name. If no interface this value is empty.
if-c/line-[tx/rx] or if-c/<channelid>-[tx/rx]
where c = chassis (always 1 for DCP-M).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.2
dcpInterfaceDeChannelId
DWDM channel identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.3
dcpInterfaceDeDirection
The direction of the channel: Rx or Tx.
SO-TC-MIBInterfaceDirection
Type Values:
1tx
2rx
Description:
The direction of the interface.
tx - The interface is transmitting traffic.
rx - The interface is receiving traffic.
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.4
dcpInterfaceDeWavelength
The ITU channel wavelength.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.5
dcpInterfaceDeStatus
The operational state for the interface.

idle - The optical interface is not activated in this direction.

down - The traffic is lost in this direction.

up - There is traffic …
SO-TC-MIBInterfaceStatus
Type Values:
1idle
2down
3up
Description:
The operational state for a port, interface or optical channel.

idle - The port, interface or optical channel is not activated.

down - The port, interface or optical channel traffic is lost.
…
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.6
dcpInterfaceDeAdminStatus
AdminStatus for the interface.

down - The interface is NOT configured to be in-service.

up - The interface is configured to be in-service.
SO-TC-MIBAdminStatus
Type Values:
1up
2down
3testing
4service
Description:
The adminStatus for a port, interface, or optical channel.
up - The port, interface or optical channel is configured to be in-service.
down - The port, interface or optical channel is NOT configured to be in-service.
te…
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.7
dcpInterfaceDeAlarm
The highest alarm severity of the optical interface.
SO-TC-MIBItuPerceivedSeverity
Type Values:
1cleared
2indeterminate
3critical
4major
5minor
6warning
Description:
ITU perceived severity values
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.8
dcpInterfaceDeClientPower
The optical power for the optical interface in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.9
dcpInterfaceDeOsnr
The interface OSNR, zero indicates NA.
SO-TC-MIBOpticalAttenuation1Decimal
Description:
Optical attenuation in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.10
dcpInterfaceDeWssAttenuation
The WSS attenuation for the optical interface in units of 0.1 dB.
SO-TC-MIBOpticalAttenuation1Decimal
Description:
Optical attenuation in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.11
dcpInterfaceDeWantedPower
The wanted optical power for the optical interface in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.12
dcpInterfaceDeActualPower
The actual optical power for the optical interface in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.13
dcpInterfaceDeLinePower
The line power in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal
Description:
Power level at an interface in units of 0.1 dBm.
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.14
dcpInterfaceDeDescription
User configurable description for the optical interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.1.6.1.1.15