DCMCU3000-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

dcPowerSystemClientSpecificMeasurementTable

table

.1.3.6.1.4.1.27383.6.1.2.12 · 1 row entry · 4 columns

Open in standard view

Uses the benning variant from /opt/observium/mibs/benning.

Command help

Walk dcPowerSystemClientSpecificMeasurementTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCMCU3000-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCMCU3000-MIB::dcPowerSystemClientSpecificMeasurementTable'

A list of client specific measurement entries.

dcPowerSystemClientSpecificMeasurementEntry row .1.3.6.1.4.1.27383.6.1.2.12.1

An entry containing information applicable to a particular client
specific measurement entry.

Indexes

dcPowerSystemClientSpecificMeasurementId

Column	Syntax	OID
dcPowerSystemClientSpecificMeasurementId A unique identifier for a client specific measurement value. This value must remain constant.	PositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.4.1.27383.6.1.2.12.1.1`
dcPowerSystemClientSpecificMeasurementDescription The client specific measurement decscription.	SNMPv2-TCDisplayString Constraints: `range: 0-63` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27383.6.1.2.12.1.2`
dcPowerSystemClientSpecificMeasurementValue This value shows the current client specifc measurement value.	FixedPointNumber Type Constraints: `range: -2147483648..2147483647` Description: This data type is a fixed point value with two decimal places.	`.1.3.6.1.4.1.27383.6.1.2.12.1.3`
dcPowerSystemClientSpecificMeasurementUnit A description of the client specific measurement unit.	SNMPv2-TCDisplayString Constraints: `range: 0-8` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27383.6.1.2.12.1.4`

dcRectifierTable

table

.1.3.6.1.4.1.27383.6.1.4.2 · 1 row entry · 11 columns

Open in standard view

Uses the benning variant from /opt/observium/mibs/benning.

Command help

Walk dcRectifierTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCMCU3000-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCMCU3000-MIB::dcRectifierTable'

A list of rectifier table entries.
The number of entries is given by the value of dcRectifierNumRectifiers.

dcRectifierEntry row .1.3.6.1.4.1.27383.6.1.4.2.1

An entry containing information applicable to a particular rectifier.

Indexes

dcRectifierIndex

Column Syntax OID

dcRectifierIndex

The rectifier identifier.

PositiveInteger

Type Constraints:
range: 1..2147483647

Description:

This data type is a non-zero and non-negative value.

.1.3.6.1.4.1.27383.6.1.4.2.1.1

dcRectifierFirmwareVersion

The rectifier's firmware version.

SNMPv2-TCDisplayString

Constraints:
range: 0-15

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27383.6.1.4.2.1.2

dcRectifierStatus

The current state of the rectifier. Rectifiers can be on or off.

Enumeration

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.27383.6.1.4.2.1.3

dcRectifierModuleFault

The current state of the retifier module fault.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.27383.6.1.4.2.1.4

dcRectifierFanFault

The current state of the retifier fan fault.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.27383.6.1.4.2.1.5

dcRectifierMainsFault

The current state of the retifier mains fault.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.27383.6.1.4.2.1.6

dcRectifierVoltage

The magnitude of the rectifier voltage.

Volt DCFixedPointNumber

Type Constraints:
range: -2147483648..2147483647

Description:

This data type is a fixed point value with
two decimal places.

.1.3.6.1.4.1.27383.6.1.4.2.1.7

dcRectifierCurrent

The magnitude of the present rectifier current.

Amp DCFixedPointNumber

Type Constraints:
range: -2147483648..2147483647

Description:

This data type is a fixed point value with
two decimal places.

.1.3.6.1.4.1.27383.6.1.4.2.1.8

dcRectifierAddress

The address of the rectifier in the system.

NonNegativeInteger

Type Constraints:
range: 0..2147483647

Description:

This data type is a non-negative value.

.1.3.6.1.4.1.27383.6.1.4.2.1.9

dcRectifierSerialNumber

The rectifier's serial number.

SNMPv2-TCDisplayString

Constraints:
range: 0-15

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27383.6.1.4.2.1.10

dcRectifierOperatingHours

The operating hours of the rectifier.

hoursNonNegativeInteger

Type Constraints:
range: 0..2147483647

Description:

This data type is a non-negative value.

.1.3.6.1.4.1.27383.6.1.4.2.1.11

dcAlarmTable

table

.1.3.6.1.4.1.27383.6.1.11.2 · 1 row entry · 5 columns

Open in standard view

Uses the benning variant from /opt/observium/mibs/benning.

Command help

Walk dcAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCMCU3000-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCMCU3000-MIB::dcAlarmTable'

A list of alarm entries.

dcAlarmEntry row .1.3.6.1.4.1.27383.6.1.11.2.1

An entry containing information applicable to a particular alarm.

Indexes

dcAlarmId

Column Syntax OID

dcAlarmId

A unique identifier for an alarm condition. This value must remain constant.

PositiveInteger

Type Constraints:
range: 1..2147483647

Description:

This data type is a non-zero and non-negative value.

.1.3.6.1.4.1.27383.6.1.11.2.1.1

dcAlarmWellKnownDescription

A reference to an alarm description object. The object referenced should not be
accessible, but rather be used to provide a unique description of the alarm condition.

SNMPv2-TCAutonomousType

Description:

Represents an independently extensible type identification
value. It may, for example, indicate a particular sub-tree
with further MIB definitions, or define a particular type of
protocol or hardware.

.1.3.6.1.4.1.27383.6.1.11.2.1.2

dcAlarmTime

The value of sysUpTime when the alarm condition was detected. If the alarm
condition was detected at the time of agent startup and presumably existed before
agent startup, the value of dcAlarmTime shall equal 0.

SNMPv2-TCTimeStamp

Based On: SNMPv2-SMITimeTicks

Description:

The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…

.1.3.6.1.4.1.27383.6.1.11.2.1.3

dcAlarmState

This value shows the current alarm state.

AlarmState

Type Values:

1	notActive
2	active
3	notPresent

Description:

This data type indicates the state of an alarm.

.1.3.6.1.4.1.27383.6.1.11.2.1.4

dcAlarmDescription

A description of the alarm condition.

SNMPv2-TCDisplayString

Constraints:
range: 0-63

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27383.6.1.11.2.1.5