DC-RSVP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
133

dcRsvpProductTable

table
.1.3.6.1.4.1.629.10.6.1.1 · 1 row entry · 72 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk dcRsvpProductTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-RSVP-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-RSVP-MIB::dcRsvpProductTable' 
The table of active instances of DC-RSVP.  The number of
fields in this table is equal to AMB_OID_RSVP_PROD_MAX.
dcRsvpProductEntry row .1.3.6.1.4.1.629.10.6.1.1.1
Each entry represents an RSVP entity.
Indexes
Column Syntax OID
dcRsvpProductIndex
The index of this dcRsvpProductEntry. This is the
HAF entity index passed on the entity create parameters.
DcRsvpIndex
Constraints:
range: 128-128
 .1.3.6.1.4.1.629.10.6.1.1.1.1
dcRsvpProductASNumber
The number identifying the autonomous system (AS) to which
this node belongs.
Integer32r/w
Constraints:
range: 0-65535
range: 128-128
 .1.3.6.1.4.1.629.10.6.1.1.1.2
dcRsvpProductSenderTTL
The TTL set on messages originating at this node. A value
of 0 indicates this number is determined by other means.
Integer32r/w
Constraints:
range: 0-255
range: 128-128
 .1.3.6.1.4.1.629.10.6.1.1.1.3
dcRsvpProductMinTimerPeriod
The minimum granularity to allow an internal timer to be
set in the DC-RSVP product code.
millisecondsSNMPv2-SMIInteger32r/w
Constraints:
range: 128-128
 .1.3.6.1.4.1.629.10.6.1.1.1.4
dcRsvpProductAPIIfIndex
Management assigned interface identifier for the (internal) LRAPI
interface between RSVP and DC-TPM components. This must be unique in
the interface index namespace of the node - it MUST not match any real
interface in…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.629.10.6.1.1.1.5
dcRsvpProductAPIAddress
Management assigned IP address used to identify the (internal) LRAPI
interface between RSVP and DC-TPM components.
The configured API address MUST not be a real address in the network.
It is recommended that this is set…
OctetStringr/w
Constraints:
range: 4-32
 .1.3.6.1.4.1.629.10.6.1.1.1.6
dcRsvpProductAPIRefreshInterval
This field is now deprecated.
millisecondsSNMPv2-SMIInteger32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.629.10.6.1.1.1.7
dcRsvpProductLocalRepairDelay
This object is used to set the delay between detection of a
path error and instigation of local repair procedures. This
allows local routing updates to converge. A value of 0
indicates no delay. A value of -1 indicat…
millisecondsSNMPv2-SMIInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.629.10.6.1.1.1.8
dcRsvpProductRefreshInterval
This RSVP value, R, which is used to set the average
interval between refresh path and resv messages.
Note : If values for the if_refresh_interval and if_refresh_multiple
are configured such that the following inequali…
millisecondsSNMPv2-SMIInteger32r/w
Enumerated Values:
1disabled
2listening
3learning
4forwarding
5blocking
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.9
dcRsvpProductRefreshMultiple
The RSVP value, K, which is the number of unresponded Path
or Resv refresh attempts which must be made, spaced by
the refresh interval before the state is deemed to have
timed out.
Note : See note in dcRsvpProductRefres…
Integer32r/w
Constraints:
range: 1-214783647
range: 0-240
 .1.3.6.1.4.1.629.10.6.1.1.1.10
dcRsvpProductRfrshSlewDenom
The denominator of the fraction, SlewMax, which is the
maximum allowable increase in the refresh interval, R, to
prevent state timeout while changing R. R is increased by
this fraction until it reaches the new desired …
Integer32r/w
Constraints:
range: 1-214783647
range: 1-200000000
 .1.3.6.1.4.1.629.10.6.1.1.1.11
dcRsvpProductRfrshSlewNumerator
The numerator of the fraction, SlewMax, which is the maximum
allowable increase in the refresh interval, R, to prevent
state timeout while changing R. R is increased by this
fraction until it reaches the new desired va…
Integer32r/w
Enumerated Values:
1root
2alternate
3designated
4backup
5disabled
Constraints:
range: 1-214783647
 .1.3.6.1.4.1.629.10.6.1.1.1.12
dcRsvpProductBlockadeMultiple
The RSVP value, Kb, which is the number of refresh timeout
periods after which blockade state is deleted.
Integer32r/w
Constraints:
range: 1-214783647
 .1.3.6.1.4.1.629.10.6.1.1.1.13
dcRsvpProductSocketBufPoolSize
The number of pre-reserved buffers available for sending
sockets data. This is used to pace the sockets data flows.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.14
dcRsvpProductSwitchBufPoolSize
The number of pre-reserved buffers available for programming
the switch. This is used to ensure programming operations do
not fail in buffer shortage conditions.
SNMPv2-SMIInteger32r/w
Constraints:
range: 1-4096
 .1.3.6.1.4.1.629.10.6.1.1.1.15
dcRsvpProductTeMibBufPoolSize
The number of pre-reserved buffers available for signalling
with the DC-TPM entity supporting the instance of the TE-MIB. This is
used to ensure signals are not lost in buffer shortage conditions.
SNMPv2-SMIInteger32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.629.10.6.1.1.1.16
dcRsvpProductRoutingBufPoolSize
The number of pre-reserved buffers available for route
queries. This is used to ensure re-routing of many LSPs does
not fail in buffer shortage conditions.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.17
dcRsvpProductLSPSetupPriority
The setup priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically more or equal (so lower or equal priority)
tha…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.629.10.6.1.1.1.18
dcRsvpProductLSPHoldingPriority
The holding priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically less or equal (so higher or equal priority)
…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.629.10.6.1.1.1.19
dcRsvpProductAdminStatus
The desired administrative state of the RSVP entity.
DcRsvpAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.6.1.1.1.20
dcRsvpProductOperStatus
The current operational state of this instance of DC-RSVP.
DcRsvpOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.6.1.1.1.21
dcRsvpProductRowStatus
Used to create and delete a DC-RSVP Product Table entry.
When this object is set to 'active', only the
dcRsvpProductAdminStatus object in the row may be modified.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.10.6.1.1.1.22
dcRsvpProductLsrIndex
The index of the DC-LMGR product instance which this
DC-RSVP is to join to as its LDB interface provider. If
this value is not specified, or the value of this object
is 0, DC-RSVP will use the dcRsvpProductIndex value …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.23
dcRsvpProductTeMibIndex
The index of the DC-TPM entity (which supports the TE-MIB) with
which this DC-RSVP entity is to join to as its LRA interface
provider. If this value is not specified, or the value of this object
is 0, DC-RSVP will use t…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.24
dcRsvpProductMultiStackSupport
A flag to indicate if multiple RSVP stacks are present
in the same system as the current one and, if so, how
they are supported. If set to PHOP, Path messages are
forwarded to DC-RSVP with the Previous Hop value set as…
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.629.10.6.1.1.1.25
dcRsvpProductUseHopByHop
A flag to indicate that DC-RSVP should use the hop by hop
addressing scheme for PATH and PATH-TEAR messages it
sends. If set then the IP addresses used in the IP header
of PATH messages forwarded by DC-RSVP set source …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.26
dcRsvpProductUseNotify
A flag to indicate that DC-RSVP should attempt to insert
a Notify Request object in all Path requests that it sends
as ingress and all Resv requests that it sends as egress.
The precise behavior is modified by a user ex…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.27
dcRsvpProductNotifyRRDecay
The percentage increase in the rapid retransmission
interval for each consecutive unacknowledged RSVP Notify
message. A value of 0 indicates a constant retransmission
rate.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.629.10.6.1.1.1.28
dcRsvpProductNotifyRRInterval
The interval in milliseconds before a Notify message is
first resent if no acknowledgement is received.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.29
dcRsvpProductNotifyRRLimit
The maximum number of times a Notify message is resent if
no acknowledgement is received.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.30
dcRsvpProductAllowIPEncap
A flag to indicate that DC-RSVP should support the use of
IP encapsulation of RSVP packets, which are required for
out-of-band signaling. If set, then DC-RSVP will accept
incoming RSVP packets that are IP encapsulated,…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.31
dcRsvpProductProtocolExtensions
Specifies which extensions to the standard RSVP-TE protocol
are enabled. For fully standards-compliant behavior, set
this parameter to zero (no bits set). To enable specific
non-standard protocol extensions, set this …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.32
dcRsvpProductPSRFlags
This field is used by DC-RSVP to determine whether it
should set the Path State Removed flag on a PathErr (and
therefore remove corresponding state and generate a
PathTear). Each bit of this flags field corresponds to …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.33
dcRsvpProductInitPathRRDecay
The percentage increase in the rapid
retransmission interval for each consecutive
unacknowledged RSVP Initial Path message. A value of 0
indicates a constant retransmission rate.

A Path message is treate…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.629.10.6.1.1.1.34
dcRsvpProductInitPathRRInterval
The rapid retransmission interval in milliseconds before
an Initial Path message is first resent if no
acknowledgement is received.

A Path message is treated as an initial Path if it is the
Path message w…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.35
dcRsvpProductInitPathRRLimit
The maximum number of times an Initial Path message is
resent if no acknowledgement is received.

A Path message is treated as an initial Path if it is the
Path message which creates the LSP or a Path refr…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.36
dcRsvpProductEnableUni
A flag to indicate whether the local node supports UNI
signaling messages.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.37
dcRsvpProductRestartCapable
A flag to indicate whether the local node should advertise
itself as restart capable. This should be set to AMB_TRUE
if fault-tolerance is enabled in DC-MPLS or if the node
supports recovery procedures.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.38
dcRsvpProductRestartTime
The time in milliseconds that the local node takes to
restart RSVP-TE and the communication channel used for
RSVP communication. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.39
dcRsvpProductRecoveryTime
The period of time in milliseconds that the local node
would like neighbors to take to resyncronize RSVP and MPLS
forwarding information after the re-establishment of Hello
connectivity. This is advertised to neighbors…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.40
dcRsvpProductMinPeerRestart
The mininum period of time in milliseconds that RSVP
should wait for a restart capable neighbor to regain
Hello connectivity before invoking procedures related to
communication loss.

RSVP will wait for th…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.41
dcRsvpProductGracefulDelTimeout
The time in milliseconds that DC-MPLS will wait for
graceful deletion to complete before the forced deletion
procedure is used instead.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.42
dcRsvpProductEgressDelBehavior
Specifies the action that an egress node should take in
the graceful deletion procedure on receipt of a Path
message containing an Admin Status object with the D
and R bits set. The possible values are:

…
Enumerationr/w
Enumerated Values:
1delWithPathErr
2delWithResvD
 .1.3.6.1.4.1.629.10.6.1.1.1.43
dcRsvpProductEnabUniConnSplicing
A flag to indicate whether UNI-N nodes should allow the
splicing of UNI connections with proprietary ON
connections.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.44
dcRsvpProductFastRerouteCaps
Specifies what fast reroute capabilities are enabled
on this node. This field is only valid if the fast
reroute extension is enabled in the
dcRsvpProductProtocolExtensions field above.

- PLR: Node provi…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.45
dcRsvpProductFastRroutBkpRtryInt
When this node is a PLR, this field specifies the period
that the node should wait before retrying the setup of a
backup LSP which failed last time because no route was
available. In the case that a backup LSP is set u…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.46
dcRsvpProductErrorActionFlags
This field is used by DC-RSVP to determine whether it
should take any special action following certain types of
local errors. Each bit of this flags field corresponds to
an error and a corresponding action.
…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.47
dcRsvpProductEnableNni
A flag to indicate whether the local node supports NNI
signaling messages.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
3disabling
 .1.3.6.1.4.1.629.10.6.1.1.1.48
dcRsvpProductBehaviorFlags
Specifies some detailed aspects of the behavior of
DC-RSVP. This field may be changed while _admin_status_
is AMB_ADMIN_STATUS_UP.

- enableTTLMatch: Whether to discard received RSVP
packets sent with the…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.1.1.49
dcRsvpProductLabelSetStyle
Specifies the style of LABEL_SET object that should be
used. RFCs 3741 and 3743 are unclear whether the
LABEL_SET object should include LABEL headers. The
correct interpretation is that the header should not be
presen…
Enumerationr/w
Enumerated Values:
1excludeLabelHeader
2includeLabelHeader
3goingtoexclude
4goingtoinclude
 .1.3.6.1.4.1.629.10.6.1.1.1.50
dcRsvpProductLabelSetOperStatus
The current operational status of Label Set style.
- excludeLabelHeader: The LABEL_SET object contains
concatenated LABEL values without the object headers.

- includeLabelHeader: The LABEL_SET object …
Enumeration
Enumerated Values:
1excludeLabelHeader
2includeLabelHeader
3goingToExclude
4goingToInclude
 .1.3.6.1.4.1.629.10.6.1.1.1.51
dcRsvpProductLabelSetTrapEnable
This object is used to enable traps for the Label
Set style oper_status object.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.52
dcRsvpProductLabelSetChngAct
Specifies the action to take when the value of
dcRsvpProductLabelSetStyle is changed.

- leaveLSPs: All nodes should suppress refreshes and
switch to the new format while refreshes are suppressed.
…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.53
dcRsvpProductExtPrtAdminStatus
The desired operational state of support for the extended
PROTECTION object defined in
draft-lang-ccamp-gmpls-recovery-e2e-signaling.

Support for end-to-end signalling is a separately licensable
component…
DcRsvpAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.6.1.1.1.54
dcRsvpProductUniIncSonetProfile
This field is obsolete. The value in this field is
ignored by DC-RSVP for Test and Set commands. This field is
always set to 0 for Get responses.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.629.10.6.1.1.1.55
dcRsvpProductFrrFacAdminStatus
Specifies whether backup LSPs can be put in place for LSPs
requesting FRR using the facility method.

Setting this to UP means that LSPs that request FRR using
the facility method can have protection at th…
DcRsvpAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.6.1.1.1.56
dcRsvpProductFrrFacOperStatus
The current operational status for FRR Facility support.
When this is UP backup LSPs will be put in place, when this
is down backup LSPs will not be put in place and there will
be no LSPs that have backup LSPs.
DcRsvpOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.6.1.1.1.57
dcRsvpProductIpv6AdminStatus
Specifies whether the local node supports IPv6 LSPs.

Setting this to UP means that this node supports IPv6 LSPs
being set up to, from and through this node.

Setting this to DOWN means that …
DcRsvpAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.6.1.1.1.58
dcRsvpProductIpv6OperStatus
The current operational status for IPv6 support. When
this is UP IPv6 LSPs can be set up to from or through this
node. When this is down there will be no active IPv6 LSPs.
DcRsvpOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.6.1.1.1.59
dcRsvpProductAPIIpv6Address
Management assigned IPv6 address used to identify the
(internal) LRAPI interface between RSVP and DC-TPM
components.

The configured API IPv6 address MUST not be a real address
in the network. It is recomm…
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.629.10.6.1.1.1.60
dcRsvpProductExtPrtOperStatus
The current operational state of support for the extended
PROTECTION object defined in
draft-lang-ccamp-gmpls-recovery-e2e-signaling.
DcRsvpOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.6.1.1.1.61
dcRsvpProductRROHopType
The type of Recorded Route hop that DC-RSVP will insert on
any messages requesting Recorded Route information.
DC-RSVP uses the same hop type on all outgoing messages.
If the hop type is changed while LSPs are active, t…
Enumerationr/w
Enumerated Values:
0outLinkLabel
1teRouterId
2upLink
3dnLinkLabel
4upLinkDnLinkLbl
5rtIdDnLinkLbl
6upLinkRtrIdDnLinkLbl
 .1.3.6.1.4.1.629.10.6.1.1.1.62
dcRsvpProductBfdIndex
The index of the BFD product instance which this
DC-RSVP is to join to as its BFD interface provider. If
the value of this object is 0, DC-RSVP will not attempt to
join to a BFD provider.
DC-MASTER-TCNumericIndexOrZeror/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.63
dcRsvpProductBfdBufPoolSize
The number of pre-reserved buffers available for BFD
interface messages. This is used to ensure that the
establishment of many BFD sessions does not fail in buffer
shortage conditions.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.64
dcRsvpProductLspAttrAdminStatus
Specifies whether the local node supports the
LSP_ATTRIBUTES object.

Setting this to UP means that this node supports LSPs with
the LSP_ATTRIBUTES object being set up to, from and
through this node.
…
DcRsvpAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.6.1.1.1.65
dcRsvpProductLspAttrOperStatus
The current operational state of support for the
LSP_ATTRIBUTES object.
DcRsvpOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.6.1.1.1.66
dcRsvpProductI3Index
The index of the I3 entity with which this DC-RSVP entity
is to join to as its I3 interface provider. If this value
is not specified, DC-RSVP will use the
dcRsvpProductLsrIndex value, or if this is also not
specified, …
DC-MASTER-TCNumericIndexOrZeror/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.67
dcRsvpProductSckIndex
The index of the SCK entity with which this DC-RSVP entity
is to join to as its SCK interface provider. If this
value is not specified, DC-RSVP will use the
dcRsvpProductIndex as the Interface Index when joining on
the…
DC-MASTER-TCNumericIndexOrZeror/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.68
dcRsvpProductNhrIndex
The index of the NHR entity with which this DC-RSVP entity
is to join to as its NHR interface provider. If this
value is not specified, DC-RSVP will use the
dcRsvpProductLsrIndex value, or if this is also not
specified…
DC-MASTER-TCNumericIndexOrZeror/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.69
dcRsvpProductWaitForHellos
Specifies whether DC-RSVP should suppress sending of Path
messages if gracefully restarting and there is no Hello
session up to the next hop.

If a Path message is suppressed, DC-RSVP starts the Path
refre…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.70
dcRsvpProductForcePEOnEgrDel
Forces DC-RSVP to send a PathErr message upstream when
carrying out forced deletion of an LSP at the egress node.
If this field is AMB_TRUE then DC-RSVP will always send a
PathErr upstream with the PSR flag set and rele…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.1.1.71
dcRsvpProductFastRrtBkpSetupInt
When this node is a PLR, this field specifies the maximum
period that the node should wait on initiating the setup
of a backup LSP before sending a Resv message upstream for
the protected LSP.
A value of 0 means that th…
millisecondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.1.1.72

dcRsvpDiagnosticTable

table
.1.3.6.1.4.1.629.10.6.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk dcRsvpDiagnosticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-RSVP-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-RSVP-MIB::dcRsvpDiagnosticTable' 
The table of sessions that are being diagnosed.
dcRsvpDiagnosticEntry row .1.3.6.1.4.1.629.10.6.1.2.1
Each entry represents a session that is being diagnosed.
Indexes
Column Syntax OID
dcRsvpDiagProductIndex
The index of the DC-RSVP product that is handling this query.
DcRsvpIndex .1.3.6.1.4.1.629.10.6.1.2.1.1
dcRsvpDiagRequestIndex
The index of this dcRsvpDiagnosticEntry. This corresponds to a
particular session being diagnosed and is an arbitrary value,
defined on row creation.
DcRsvpDiagReqIndex .1.3.6.1.4.1.629.10.6.1.2.1.2
dcRsvpDiagReqsInProgress
The number of outstanding diagnostic requests relating to this
session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.2.1.3
dcRsvpDiagSessionEndPoint
The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4
session object.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.2.1.4
dcRsvpDiagSessionTunnelId
The tunnel ID, from the LSP_TUNNEL_IPv4 session object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.2.1.5
dcRsvpDiagSessionExtTunnelId
The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.2.1.6
dcRsvpDiagLastHop
The IP address of the last hop to be queried. This is the address
to which the DREQ message is first sent.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.2.1.7
dcRsvpDiagSender
The IP address of the sender for the specified session.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.2.1.8
dcRsvpDiagMaxHops
The maximum number of hops to diagnose.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.10.6.1.2.1.9
dcRsvpDiagHopByHopReply
A flag to indicate that DREPs should be returned hop-by-
hop using the reverse of the path taken by the DREQ.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.2.1.10
dcRsvpDiagRowStatus
Used to create or delete a DC-RSVP Diagnostic Table entry.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.10.6.1.2.1.11

dcRsvpDiagNodeTable

table
.1.3.6.1.4.1.629.10.6.1.3 · 1 row entry · 35 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk dcRsvpDiagNodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-RSVP-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-RSVP-MIB::dcRsvpDiagNodeTable' 
The table of nodes within a session that is being diagnosed.
          
External management can extract information
from this table, but cannot modify information in it.
dcRsvpDiagNodeEntry row .1.3.6.1.4.1.629.10.6.1.3.1
Each entry represents a node within a session that is being diagnosed.
Indexes
Column Syntax OID
dcRsvpDiagNodeProductIndex
The index of the DC-RSVP product that is handling this query.
DcRsvpIndex .1.3.6.1.4.1.629.10.6.1.3.1.1
dcRsvpDiagNodeRequestIndex
The index of the corresponding request in dcRsvpDiagnosticTable.
DcRsvpDiagReqIndex .1.3.6.1.4.1.629.10.6.1.3.1.2
dcRsvpDiagNodeIndex
The index of this dcRsvpDiagNodeEntry. This is equivalent to the
hop number, with 1 being the ingress.
DcRsvpDiagNodeIndexType .1.3.6.1.4.1.629.10.6.1.3.1.3
dcRsvpDiagNodeType
The type of the node: ingress, transit, egress or missing. Missing
indicates that no diagnostic response has been received for this
node, and this entry may in fact represent more than one node.
DcRsvpDiagNodeTypeVal
Type Values:
1missing
2ingress
3transit
4egress
 .1.3.6.1.4.1.629.10.6.1.3.1.4
dcRsvpDiagNodeDreqArrivalTime
The arrival time of the DREQ at the node, specified as a 32-bit
NTP timestamp.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.5
dcRsvpDiagNodeIncomingIfAddr
The IP address of the interface on which message from the sender
are expected to arrive at this node, or 0 if unknown.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.3.1.6
dcRsvpDiagNodeOutgoingIfAddr
The IP address of the interface through which the DREQ arrived
and to which messages flow from the given sender for the
specified session address, or 0 if unknown.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.3.1.7
dcRsvpDiagNodePrevHopAddr
The IP address from which this node receives RSVP PATH messages
for this source, or 0 if unknown. This is also the address to
which the DREQ was forwarded.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.3.1.8
dcRsvpDiagNodeDTTL
The number of IP hops traversed by the DREQ between the downstream
RSVP node and this node.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.10.6.1.3.1.9
dcRsvpDiagNodeMFlag
A flag that indicates whether the reservation described by the
response objects is merged with reservations from other downstream
interfaces before being forwarded upstream.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.3.1.10
dcRsvpDiagNodeRErr
The error conditions at this node.
Bit 3 indicates ROUTE object too big;
Bit 2 indicates packet too big;
Bit 1 indicates no PATH state.
Bit 1 is the least significant bit.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.629.10.6.1.3.1.11
dcRsvpDiagNodeKValue
The refresh timer multiple.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.629.10.6.1.3.1.12
dcRsvpDiagNodeTimerValue
The local refresh timer value in seconds.
secondsInteger32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.629.10.6.1.3.1.13
dcRsvpDiagRsvpHopAddr
The hop address from the session's RSVP_HOP object.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.3.1.14
dcRsvpDiagRsvpHopLIH
The LIH from the session's RSVP_HOP object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.15
dcRsvpDiagSenderTpltAddress
The address from the session's SENDER_TEMPLATE object.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.3.1.16
dcRsvpDiagSenderTpltLSPId
The LSP ID from the session's SENDER_TEMPLATE object.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.629.10.6.1.3.1.17
dcRsvpDiagFlowSpecCLBktRate
Int-serv controlled load token bucket rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.18
dcRsvpDiagFlowSpecCLBktDep
Int-serv controlled load token bucket depth in bytes,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.19
dcRsvpDiagFlowSpecCLPkDataRate
Int-serv controlled load peak data rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.20
dcRsvpDiagFlowSpecCLMinPolUnit
Int-serv controlled load minimum policed unit
from the session's RRI_FLOWSPEC object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.21
dcRsvpDiagFlowSpecCLMaxPktSize
Int-serv controlled load maximum packet size
from the session's RRI_FLOWSPEC object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.22
dcRsvpDiagFlowSpecGQBktRate
Int-serv guaranteed QoS token bucket rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.23
dcRsvpDiagFlowSpecGQBktDep
Int-serv guaranteed QoS token bucket depth in bytes,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.24
dcRsvpDiagFlowSpecGQPkDataRate
Int-serv guaranteed QoS peak data rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.25
dcRsvpDiagFlowSpecGQMinPolUnit
Int-serv guaranteed QoS minimum policed unit
from the session's RRI_FLOWSPEC object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.26
dcRsvpDiagFlowSpecGQMaxPktSize
Int-serv guaranteed QoS maximum packet size
from the session's RRI_FLOWSPEC object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.27
dcRsvpDiagFlowSpecGQRate
Int-serv guaranteed QoS rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.28
dcRsvpDiagFlowSpecGQSlack
Int-serv guaranteed QoS slack in microseconds,
from the session's RRI_FLOWSPEC object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.29
dcRsvpDiagFlowSpecCoSCoS
CoS class of service from the session's RRI_FLOWSPEC object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.10.6.1.3.1.30
dcRsvpDiagFlowSpecCoSMTU
CoS maximum packet size from the session's RRI_FLOWSPEC object.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.629.10.6.1.3.1.31
dcRsvpDiagFilterSpecAddress
The address from the session's FILTER_SPEC object.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.3.1.32
dcRsvpDiagFilterSpecLSPId
The LSP ID from the session's FILTER_SPEC object.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.629.10.6.1.3.1.33
dcRsvpDiagConfirmRcvAddr
The address from the session's CONFIRM object.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.6.1.3.1.34
dcRsvpDiagStyle
The style word from the session's STYLE object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.3.1.35

dcRsvpIfTable

table
.1.3.6.1.4.1.629.10.6.1.4 · 1 row entry · 15 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk dcRsvpIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-RSVP-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-RSVP-MIB::dcRsvpIfTable' 
Each entry in this table represents a RSVP-TE interface
parameters entity.
dcRsvpIfEntry row .1.3.6.1.4.1.629.10.6.1.4.1
Each entry represents a RSVP-TE interface.
Indexes
Column Syntax OID
dcRsvpIfProductIndex
Index for the RSVP-TE instance.
DcRsvpIndex .1.3.6.1.4.1.629.10.6.1.4.1.1
dcRsvpIfIndex
Network interface index in the IF-MIB (RFC 2233) of the RSVP-TE interface.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.629.10.6.1.4.1.2
dcRsvpIfName
The textual name of the interface. The value of this
object is the name of the interface as assigned by the
local device and is suitable for use in commands entered
at the device's 'console'. This might be a text name…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.629.10.6.1.4.1.3
dcRsvpIfRowStatus
The row status for this RSVP-TE interface
table entry, used to create and destroy table entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.10.6.1.4.1.4
dcRsvpIfAdminStatus
Administrative status for this interface. When
dcRsvpIfRowStatus is set to 'active' and dcRsvpIfAdminStatus is
'up' this interface is advertised into DC-MPLS.
DcRsvpAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.6.1.4.1.5
dcRsvpIfOperStatus
Current operational status of the RSVP-TE interface.
DcRsvpOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.6.1.4.1.6
dcRsvpIfUseRefrMsgs
Indicates the level of refresh reduction support to be
configured on this interface.
DcRsvpIfRefreshOptionr/w .1.3.6.1.4.1.629.10.6.1.4.1.7
dcRsvpIfUseMessageIDs
Indicates whether Message ID support should be configured
on this interface. Note that Refresh Reduction measures
cannot be used if Message ID support is not enabled for
that interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.6.1.4.1.8
dcRsvpIfRefreshInterval
The average interval, in milliseconds, between Path and
Resv refresh messages for LSPs which use this interface
for RSVP-signalled data.

A value of 0 indicates that the globally configured value
in the RS…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.4.1.9
dcRsvpIfHelloPeriod
Default period in milliseconds between sending Hello
messages to all neighbors on this interface. If this is
set to 0, no Hello messages are sent by this interface.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.4.1.10
dcRsvpIfHelloTolerance
Number of hello periods which may pass without receiving a
successful Hello message from a partner before the Hello
session times out.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.6.1.4.1.11
dcRsvpIfBfdEnabled
Indicates whether Bidirectional Forwarding Detection (BFD) is
enabled on this interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.4.1.12
dcRsvpIfPhpEnabled
Indicates whether Penultimate Hop Popping (PHP) is
enabled on this interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.4.1.13
dcRsvpIfExplNullEnabled
Indicates whether Explicit NULL is
enabled on this interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.4.1.14
dcRsvpIfAdminGroup
RSVP-TE interface administrative group for this interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.6.1.4.1.15