DC-PIM-MIB Table View

This table is used to create and manage the {interface, IP
version} pairs for which PIM is enabled.
          
When the entity is running MGMD Snooping or Proxy (but not
in the deprecated mode enabled by pimTmEntMgmdProxy), this
table is not used, and all rows created will be ignored.

pimInterfaceEntry row .1.2.826.42.1.1578918.5.71.1.1.1.1.1

An entry (conceptual row) in the pimInterfaceTable.

Indexes

pimTmEntIndex pimInterfaceIfIndex pimInterfaceIPVersion

Column	Syntax	OID
pimInterfaceIfIndex The ifIndex value of this PIM interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.1
pimInterfaceIPVersion The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, for example IPv4 and IPv6, but the traffic is considered to be logically separate, and a separate row must be…	INET-ADDRESS-MIBInetVersion Type Values: 0 unknown 1 ipv4 2 ipv6	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.2
pimInterfaceAddressType The address type of this PIM interface. DC-PIM returns the same entry for this object as for the pimInterfaceIPVersion object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.3
pimInterfaceAddress The primary IP address of this router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.4
pimInterfaceNetMaskLength The network mask length for the primary IP address of this router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object. A value of 0 indicates that the network mask length is unkno…	Unsigned32 Constraints: range: 0-128	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.5
pimInterfaceDR The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object. This field is ignored if pimTmEntMgmdProxy is set to 'true'. …	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.6
pimInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM and PIM-DM specifications (RFC4601 and RFC3973 respectively -…	secondsUnsigned32r/w Constraints: range: 0-18000	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.7
pimInterfaceTrigHelloInterval The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Triggered_Hello_Delay' timer value defined in the PIM-SM and PIM-DM specifications (RFC4601 and…	secondsUnsigned32r/w Constraints: range: 0-60	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.8
pimInterfaceJoinPruneInterval The frequency at which this router sends PIM Join/Prune messages on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the PIM-SM and BIDIR-PIM specifications (RFC4601 and RFC5015). …	secondsUnsigned32r/w Constraints: range: 0-18000	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.9
pimInterfaceHelloHoldtime The value set in the Holdtime field of PIM Hello messages transmitted on this interface, that is, the amount of time a receiver must consider the neighbor reachable, in the absence of further PIM Hello messages. A valu…	secondsUnsigned32r/w Constraints: range: 0-65535	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.11
pimInterfaceJoinPruneHoldtime The value inserted into the Holdtime field of a PIM Join/Prune message sent on this interface, that is, the amount of time a receiver must keep the Join/Prune state alive, in the absence of further PIM Join/Prune messag…	secondsUnsigned32r/w Constraints: range: 0-65535	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.12
pimInterfacePropagationDelay The value this router inserts into the Propagation_Delay field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface, that is, the expected propagation delay on the link. Implementations sh…	millisecondsUnsigned32r/w Constraints: range: 0-32767	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.14
pimInterfaceOverrideInterval The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface, that is, the preferred maximum value of the randomized interval during w…	millisecondsUnsigned32r/w Constraints: range: 0-65535	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.15
pimInterfaceGenerationIDValue The value of the Generation ID this router inserted in the last PIM Hello message it sent on this interface, that is, an arbitrary value which allows PIM neighbors to detect when the local router has restarted. This fi…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.17
pimInterfaceDRPriority The Designated Router Priority value inserted into the DR Priority option on this interface. If all routers on the interface include the DR Priority option in their PIM Hello messages, the router with the highest DR pr…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.19
pimInterfaceLanDelayEnabled Evaluates to 'true' if all routers on this interface are using the LAN Prune Delay option. This field is ignored if pimTmEntMgmdProxy is set to 'true'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.20
pimInterfaceEffectPropagDelay The Effective Propagation Delay on this interface. This object is always 500 if pimInterfaceLanDelayEnabled is 'false'. This field is ignored if pimTmEntMgmdProxy is set to 'true'.	millisecondsUnsigned32 Constraints: range: 0-32767	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.21
pimInterfaceEffectOverrideIvl The Effective Override Interval on this interface. This object is always 2500 if pimInterfaceLanDelayEnabled is 'false'. This field is ignored if pimTmEntMgmdProxy is set to 'true'.	millisecondsUnsigned32 Constraints: range: 0-65535	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.22
pimInterfaceSuppressionEnabled Whether join suppression is enabled on this interface. This object is always 'true' if pimInterfaceLanDelayEnabled is 'false'. This field is ignored if pimTmEntMgmdProxy is set to 'true'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.23
pimInterfaceBidirCapable Evaluates to 'true' if all routers on this interface are using the Bidirectional-PIM Capable option. This field is ignored if pimTmEntMgmdProxy is set to 'true'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.24
pimInterfaceDRPriorityEnabled Evaluates to 'true' if all routers on this interface are using the DR Priority option. This field is only relevant for PIM-SM, but DC-PIM evaluates it from received PIM Hello messages irrespective of whic…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.25
pimInterfaceStatus The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. All writeable objects in this entry can be modified when the status of this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.27
pimInterfaceGraftRetryInterval The minimum interval that must transpire between two successive Graft(S,G) messages sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value defined in the PIM-DM specification (RFC3973). …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.28
pimInterfaceSRAllCapable Evaluates to 'true' if all routers on this interface are using the State Refresh option. This field is only relevant to PIM-DM. It is always 'false' if either - 'dense' is clear for pimTm…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.29
pimInterfaceAdminStatus The desired administrative state of this interface.	DC-MASTER-TCAdminStatusr/w Type Values: 1 adminStatusUp 2 adminStatusDown	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.51
pimInterfaceOperStatus The current operational state of this interface.	DC-MASTER-TCNpgOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed 8 operStatusFailed 10 operStatusFailedPerm 11 operStatusFailing	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.52
pimInterfaceStubInterface Whether this interface is a 'stub interface' with regard to PIM. If this is set to 'true', no PIM packets are sent or processed (if received) on this interface. This should be set to 'true' if there are no other PIM r…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.53
pimInterfaceP2PNoHellos Whether this interface is a point-to-point interface on which we do not require the neighbor to send PIM-Hello signals. Provided for back-compatibility with some older implementations that do not send Hellos on point-t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.54
pimInterfaceMgmdEntIndex The HAF entity index of the DC-MGMD (for example, for IPv4 this is DC-IGMP) Router component that owns this interface. Zero is a wildcard value meaning that no DC-MGMD Router component currently owns the interface, and …	DC-MASTER-TCNumericIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.55
pimInterfaceNeighborCount The number of PIM neighbors on this interface. This field is ignored if pimTmEntMgmdProxy is set to 'true'.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.56
pimInterfaceStarGStateLimit The maximum number of groups for which DC-PIM TIB Manager is allowed to store (*,G,I) state specific to this interface. A value of zero means that there is no limit. Decreasing this value to less than pi…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.57
pimInterfaceStarGStateWarnThold DC-PIM TIB Manager logs an exception if the number of groups for which it is storing (*,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.58
pimInterfaceStarGStateStored The number of groups for which DC-PIM TIB Manager is storing (*,G,I) state specific to this interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.59
pimInterfaceSGStateLimit The maximum number of {source, group} pairs for which DC-PIM TIB Manager is allowed to store (S,G,I) state specific to this interface. A value of zero means that there is no limit. Decreasing this value …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.60
pimInterfaceSGStateWarnThold DC-PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing (S,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.61
pimInterfaceSGStateStored The number of {source, group} pairs for which DC-PIM TIB Manager is storing (S,G,I) state specific to this interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.62
pimInterfaceUseNeighborFilter Setting this object to 'true' enables the neighbor filter specified by pimInterfaceNeighborFilter. This field is ignored if pimTmEntMgmdProxy is set to 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.63
pimInterfaceNeighborFilter When neighbor filtering is enabled (that is, when pimInterfaceUseNeighborFilter is 'true'), the local router will process link-local multicast PIM messages received on this interface only if the originator's IP address …	DC-MASTER-TCStdAccessListListIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.64
pimInterfaceAssertInterval The frequency at which this router sends PIM Assert messages on this interface when it is the assert winner. This object corresponds to the 'Assert_Time' minus the 'Assert_Override_Interval' defined in the PIM-SM and th…	secondsUnsigned32r/w Constraints: range: 0-65535	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.65
pimInterfaceAssertHoldtime The interval before this router leaves assert loser state on this interface, unless it receives a PIM Assert message that refreshes this state. This object corresponds to the 'Assert_Time' timer value defined in the PI…	secondsUnsigned32r/w Constraints: range: 0-65535	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.66
pimInterfaceDomainBorder Whether or not this interface is a PIM domain border. The effect of being a PIM domain border interface is to disable the BSR protocol, thus allowing each PIM domain to separately determine RPs. This field is ignored …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.67
pimInterfaceUseAsmGrpFilter Setting this object to 'true' enables the PIM-SM ASM and BIDIR-PIM group filter specified by pimInterfaceAsmGrpFilter. This field is only relevant for PIM-SM and BIDIR-PIM. It is ignored if 'sparse' and …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.68
pimInterfaceAsmGrpFilter When PIM-SM ASM / BIDIR-PIM group filtering is enabled (that is, when pimInterfaceUseAsmGrpFilter is 'true'), then for groups in the PIM-SM ASM and BIDIR-PIM spaces the local router will: - process PIM (…	DC-MASTER-TCStdAccessListListIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.69
pimInterfaceUseSsmSrcAndGrpFilt Setting this object to 'true' enables the SSM source and group filter specified by pimInterfaceSsmSrcAndGrpFilter. This field is only relevant for PIM-SM. It is ignored if 'sparse' is clear for pimTmEntM…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.70
pimInterfaceSsmSrcAndGrpFilter When SSM source and group filtering is enabled (that is, when pimInterfaceUseSsmSrcAndGrpFilt is 'true'), then for groups in the SSM space the local router will - process PIM (S,G) Join messages received…	DC-MASTER-TCExtAccessListListIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.71
pimInterfaceSiteName Site name corresponding to the remote endpoint of the PIM interface	OctetString Constraints: range: 0-128	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.72
pimInterfaceIfName Name of the interface	OctetString Constraints: range: 0-128	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.73
pimInterfaceDFElectionRobustness The number of times that the local router sends copies of the same DF Offer or DF Winner message. This object corresponds to the 'Election_Robustness' value defined in the BIDIR-PIM specification (RFC5015…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.74
pimInterfaceDFElectionOfferIvl The interval between resends of the same DF message, prior to subtracting a random amount of jitter. This object corresponds to the 'Offer_Period' value defined in the BIDIR-PIM specification (RFC5015). …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.75
pimInterfaceDFElectionBackoffIvl The interval that the acting DF waits after learning of an MRIB change, before passing the role to the best neighboring router. This object corresponds to the 'Backoff_Period' value defined in the BIDIR-P…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.76
pimInterfaceBfdDesired Indicates the type of Bidirectional Forwarding Detection (BFD) support desired on this interface. This field is ignored if pimInterfaceP2PNoHellos is set to 'true'. Strict mode is not suppo…	PimBfdSessionTyper/w Type Values: 0 none 1 desired 2 strict	.1.2.826.42.1.1578918.5.71.1.1.1.1.1.77

The (conceptual) table listing the router's PIM neighbors.
          
This table is not used for MGMD Snooping or Proxy.

pimNeighborEntry row .1.2.826.42.1.1578918.5.71.1.1.1.2.1

An entry (conceptual row) in the pimNeighborTable.

Indexes

pimTmEntIndex pimNeighborIfIndex pimNeighborAddressType pimNeighborAddress

Column	Syntax	OID
pimNeighborIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.1
pimNeighborAddressType The address type of this PIM neighbor. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.2
pimNeighborAddress The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNeighborAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.3
pimNeighborUpTime The time since this PIM neighbor (last) became a neighbor of the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.4
pimNeighborExpiryTime The minimum time remaining before this PIM neighbor will be aged out. The value zero indicates that this PIM neighbor will never be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.5
pimNeighborLanPruneDelayPresent Evaluates to 'true' if this neighbor is using the LAN Prune Delay option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.6
pimNeighborPropagationDelay The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor, that is, the expected propagation delay on the link. This object is always 0 if pimNeighborLanPruneDelayPresent is 'fa…	Unsigned32 Constraints: range: 0-32767	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.7
pimNeighborOverrideInterval The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor, that is, the preferred maximum value of the randomized interval during which a PIM router can override another PIM rout…	Unsigned32 Constraints: range: 0-65535	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.8
pimNeighborTBit Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppression. This field is always 'true' if pimNeighbo…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.9
pimNeighborGenerationIDPresent Evaluates to 'true' if this neighbor is using the Generation ID option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.10
pimNeighborGenerationIDValue The value of the Generation ID from the last PIM Hello message received from this neighbor, that is, an arbitrary value which allows other PIM routers to detect when this PIM neighbor has restarted. This …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.11
pimNeighborBidirCapable Evaluates to 'true' if this neighbor is using the Bidirectional-PIM Capable option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.12
pimNeighborDRPriorityPresent Evaluates to 'true' if this neighbor is using the DR Priority option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.13
pimNeighborDRPriority The value of the Designated Router Priority from the last PIM Hello message received from this neighbor, that is, the administrative preference for this neighbor to be the DR (a numerically larger value is preferred). …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.14
pimNeighborSRCapable Evaluates to TRUE if this neighbor is using the State Refresh Capable option. State Refresh capability is not relevant for bidir or sparse-mode groups. However, because all PIM modes use a commonized Hel…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.16
pimNeighborHoldTime The value of the Holdtime field from the last PIM Hello message received from this neighbor, that is, a value in secs for which this neighbor should be kept alive.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.17
pimNeighborOperStatus The status of the neighbor. This is Oper Status Up at all times that this neighbor row exists except for the following: - this neighor has been heard from over an interfact that requires strict-BFD, and…	PimNeighborOperState Type Values: 1 up 2 goingDown 3 pendingBfd	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.18
pimNeighborBfdStatus The status of the BFD session to this neighbor. If BFD session support for the interface is set to 'none', this field always has a value of 'notRequired'.	DC-MASTER-TCBfdSessionStatus Type Values: 0 bfdSessNotRequired 1 bfdSessInitial 2 bfdSessActivating 3 bfdSessActive 4 bfdSessInactive 5 bfdSessAdminDown 6 bfdSessNoContact	.1.2.826.42.1.1578918.5.71.1.1.1.2.1.19

The (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the pimNeighborTable defined above).
          
This table is not used for MGMD Snooping or Proxy.

pimNbrSecAddressEntry row .1.2.826.42.1.1578918.5.71.1.1.1.3.1

An entry (conceptual row) in the pimNbrSecAddressTable.

Indexes

pimTmEntIndex pimNbrSecAddressIfIndex pimNbrSecAddressType pimNbrSecAddressPrimary pimNbrSecAddress

Column	Syntax	OID
pimNbrSecAddressIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.826.42.1.1578918.5.71.1.1.1.3.1.1
pimNbrSecAddressType The address type of this PIM neighbor. DC-PIM returns 'ipv4' or 'ipv6' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.3.1.2
pimNbrSecAddressPrimary The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object.	OctetString Constraints: range: 4-4 range: 8-8 range: 16-16 range: 20-20	.1.2.826.42.1.1578918.5.71.1.1.1.3.1.3
pimNbrSecAddress The secondary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.3.1.4

The (conceptual) table listing the non-interface specific
(*,G) state that the entity maintains.
          
This MIB table is not used for MGMD Snooping or PIM-DM, nor
for MGMD Proxy (except in the deprecated mode), so is empty
if pimTmEntMgmdProxy is set to 'false' and 'sparse' and
'bidir' are both clear for pimTmEntMode.

pimStarGEntry row .1.2.826.42.1.1578918.5.71.1.1.1.4.1

An entry (conceptual row) in the pimStarGTable.

Indexes

pimTmEntIndex pimStarGAddressType pimStarGGrpAddress

Column	Syntax	OID
pimStarGAddressType The address type of this multicast group. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.1
pimStarGGrpAddress The multicast group address. The InetAddressType is given by the pimStarGAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.2
pimStarGUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.3
pimStarGPimMode Whether this entry represents a PIM-SM ASM (Any-Source Multicast, used with PIM-SM), PIM-SM SSM (Single-Source Multicast, used with PIM-SM), PIM-DM (Dense mode) or BIDIR-PIM (bidirectional mode) group.	PimGroupMode Type Values: 1 none 2 ssm 3 asm 4 bidir 5 other 6 dense	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.4
pimStarGRPAddressType The address type of the Rendezvous Point (RP), or unknown(0) if the RP address is unknown. DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.5
pimStarGRPAddress The address of the Rendezvous Point (RP) for the group. The InetAddressType is given by the pimStarGRPAddressType. This object is zero if the RP address is unknown.	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16 range: 20-20	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.6
pimStarGRPOrigin The mechanism by which the RP for the group was learned.	PimGroupMappingOriginType Type Values: 1 static 2 config 3 bsr 4 embedded 5 other	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.7
pimStarGRPIsLocal Whether the local router is the RP for the group.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.8
pimStarGUpstreamJoinState Whether the local router should join the RP tree for the group. This corresponds to the state of the upstream (*,G) state machine in the PIM-SM and BIDIR-PIM specifications (RFC4601 and RFC5015, respectively).	Enumeration Enumerated Values: 1 notJoined 2 joined	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.9
pimStarGUpstreamJoinTimer The time remaining before the local router next sends a periodic (*,G) Join message on pimStarGRPFIfIndex. This timer is called the (*,G) Upstream Join Timer in the PIM-SM specification (RFC4601) and the Upstream Join …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.10
pimStarGUpstreamNeighborType The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor. DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.11
pimStarGUpstreamNeighbor The primary address of the neighbor on pimStarGRPFIfIndex that the local router is sending periodic (*,G) Join messages to. The InetAddressType is given by the pimStarGUpstreamNeighborType object. This address is call…	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16 range: 20-20	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.12
pimStarGRPFIfIndex The value of ifIndex for the RPF interface towards the RP, or zero if the RPF interface is unknown or the RP is local.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.13
pimStarGRPFNextHopType The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown. DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.14
pimStarGRPFNextHop The address of the RPF next hop towards the RP. The InetAddressType is given by the pimStarGRPFNextHopType object. This address is called MRIB.next_hop(RP(G)) in the PIM-SM specification (FRC4601) and the RPF Neighbor…	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.15
pimStarGRPFRouteProtocol The routing mechanism via which the route used to find the RPF interface towards the RP was learned.	IANA-RTPROTO-MIBIANAipRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 dvmrp 18 rpl 19 dhcp 20 ttdp	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.16
pimStarGRPFRouteAddress The IP address which when combined with the corresponding value of pimStarGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the pimStarGRPFNextHop…	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.17
pimStarGRPFRoutePrefixLength The prefix length which when combined with the corresponding value of pimStarGRPFRouteAddress identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the pimStarGRPFNextHopTyp…	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.18
pimStarGRPFRouteMetricPref The metric preference of the route used to find the RPF interface towards the RP.	Unsigned32 Constraints: range: 0-2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.19
pimStarGRPFRouteMetric The routing metric of the route used to find the RPF interface towards the RP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.4.1.20

The (conceptual) table listing the interface-specific (*,G)
state that the entity maintains.
          
For MGMD Proxy or Snooping, or PIM-DM, (*,G,I) state exists
only because of local group membership requirements that
DC-PIM has learned from the MGMD Router implementation.

pimStarGIEntry row .1.2.826.42.1.1578918.5.71.1.1.1.5.1

An entry (conceptual row) in the pimStarGITable.

Indexes

pimTmEntIndex pimStarGAddressType pimStarGGrpAddress pimStarGIIfIndex

Column	Syntax	OID
pimStarGIIfIndex The ifIndex of the interface that this entry corresponds to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.1
pimStarGIPimMode Whether this entry represents a PIM-SM ASM (Any-Source Multicast, used with PIM-SM), PIM-SM SSM (Single-Source Multicast, used with PIM-SM), PIM-DM (Dense mode) or BIDIR-PIM (bidirectional mode) group. Fo…	PimGroupMode Type Values: 1 none 2 ssm 3 asm 4 bidir 5 other 6 dense	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.2
pimStarGIUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.3
pimStarGILocalMembership Whether the local router has (*,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(*,G,I) in the PIM-SM specification (RFC4601) and the (*…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.4
pimStarGIJoinPruneState The state resulting from (*,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (*,G) state machine in the PIM-SM and BIDIR-PIM specifications (RFC4601 and R…	Enumeration Enumerated Values: 1 noInfo 2 join 3 prunePending 4 pruned	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.5
pimStarGIPrunePendingTimer The time remaining before the local router acts on a (*,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This tim…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.6
pimStarGIJoinExpiryTimer The time remaining before (*,G) Join state for this interface expires. This timer is called the (*,G) Join Expiry Timer in the PIM-SM specification (RFC4601) and the Join/Prune Expiry Timer in the BIDIR-PIM specificati…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.7
pimStarGIAssertState The (*,G) Assert state for this interface. This corresponds to the state of the per-interface (*,G) Assert state machine in the PIM-SM specification (RFC4601). If pimStarGPimMode is 'bidir', this object must be 'noInf…	Enumeration Enumerated Values: 1 noInfo 2 iAmAssertWinner 3 iAmAssertLoser	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.8
pimStarGIAssertTimer If pimStarGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (*,G) Assert message on this interface. If pimStarGIAssertState is 'iAmAssertLoser', this is the time remain…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.9
pimStarGIAssertWinnerAddressType If pimStarGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0). DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this object. …	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.10
pimStarGIAssertWinnerAddress If pimStarGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimStarGIAssertWinnerAddressType object. This field is only relevant for PIM-SM.…	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.11
pimStarGIAssertWinnerMetricPref If pimStarGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the RP advertised by the assert winner; otherwise, this object is zero. This field is only relevant for PIM-SM. …	Unsigned32 Constraints: range: 0-2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.12
pimStarGIAssertWinnerMetric If pimStarGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the RP advertised by the assert winner; otherwise, this object is zero. This field is only relevant for PIM-SM. It …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.5.1.13

The (conceptual) table listing the non-interface specific
(S,G) state that the entity maintains.
          
This MIB table is not used for MGMD Snooping or MGMD Proxy
(except in the deprecated mode enabled by
pimTmEntMgmdProxy).

pimSGEntry row .1.2.826.42.1.1578918.5.71.1.1.1.6.1

An entry (conceptual row) in the pimSGTable.

Indexes

pimTmEntIndex pimSGAddressType pimSGGrpAddress pimSGSrcAddress

Column	Syntax	OID
pimSGAddressType The address type of the source and multicast group for this entry. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.1
pimSGGrpAddress The multicast group address for this entry. The InetAddressType is given by the pimSGAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.2
pimSGSrcAddress The source address for this entry. The InetAddressType is given by the pimSGAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.3
pimSGUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.4
pimSGPimMode Whether pimSGGrpAddress is a PIM-SM SSM (Source Specific Multicast, used with PIM-SM), PIM-SM ASM (Any Source Multicast, used with PIM-SM), PIM-DM (dense mode) or BIDIR-PIM (bidirectional mode) group.	PimGroupMode Type Values: 1 none 2 ssm 3 asm 4 bidir 5 other 6 dense	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.5
pimSGUpstreamJoinState Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds to the state of the upstream (S,G) state machine in the PIM-SM specification (RFC4601). …	Enumeration Enumerated Values: 1 notJoined 2 joined	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.6
pimSGUpstreamJoinTimer The time remaining before the local router next sends a periodic (S,G) Join message on pimSGRPFIfIndex. This timer is called the (S,G) Upstream Join Timer in the PIM-SM specification (RFC4601). This object is zero if …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.7
pimSGUpstreamNeighbor The primary address of the neighbor on pimSGRPFIfIndex that is the local router's next hop neighbor towards the source. This is zero if the the RPF next hop is unknown or is not a PIM neighbor. The InetAddressType is …	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.8
pimSGRPFIfIndex The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.9
pimSGRPFNextHopType The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown. DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.10
pimSGRPFNextHop The address of the RPF next hop towards the source. The InetAddressType is given by the pimSGRPFNextHopType. This address is called MRIB.next_hop(S) in the PIM-SM and PIM-DM specifications (RFC4601 and RFC3973).	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.11
pimSGRPFRouteProtocol The routing mechanism via which the route used to find the RPF interface towards the source was learned.	IANA-RTPROTO-MIBIANAipRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 dvmrp 18 rpl 19 dhcp 20 ttdp	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.12
pimSGRPFRouteAddress The IP address which when combined with the corresponding value of pimSGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the pimSGRPFNextHopTy…	OctetString Constraints: range: 4-4 range: 8-8 range: 16-16 range: 20-20	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.13
pimSGRPFRoutePrefixLength The prefix length which when combined with the corresponding value of pimSGRPFRouteAddress identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the pimSGRPFNextHopType …	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.14
pimSGRPFRouteMetricPref The metric preference of the route used to find the RPF interface towards the source.	Unsigned32 Constraints: range: 0-2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.15
pimSGRPFRouteMetric The routing metric of the route used to find the RPF interface towards the source.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.16
pimSGSPTBit Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree. This field is only relevant for PIM-SM. It is ignored if any of the following are true: …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.17
pimSGDRRegisterState Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to the state of the per-(S,G) Register state machine in the PIM-SM specification (RFC4601). …	Enumeration Enumerated Values: 1 noInfo 2 join 3 joinPending 4 prune	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.19
pimSGDRRegisterStopTimer If pimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If pimSGDRRegisterState is 'joinPending', this is the time remaining before the local rout…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.20
pimSGUpstreamPruneState Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. This field is only relevant for PIM-DM. It i…	PruneState Type Values: 1 forwarding 2 ackPending 3 pruned	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.22
pimSGOriginatorState Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specification. This field is only relevant for PIM-DM.…	OriginatorState Type Values: 0 notOriginator 1 originator	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.23
pimSGStateRefreshTimer If pimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer is called the State Refresh Timer in the PIM-DM specificat…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.24
pimSGPruneLimitTimer If pimSGUpstreamPruneState is 'pruned', this is the time remaining before the local router may send a Prune(S,G) message on pimSGRPFIfIndex. Otherwise, this is zero. This timer is called the (S,G) Prune Limit Timer in …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.25
pimSGLocalMsdpAdv Whether there is an active local data flow for this (S,G) that has been advertised to an MSDE partner. This field is only relevant for PIM-SM. It is always 'false' if any of the following are true: …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.26
pimSGMsdpRemoteDataAct Whether there is an active remote data flow for this (S,G) that has been advertised into DC-PIM by an MSDE partner. This field is only relevant for PIM-SM. It is always 'false' if any of the following ar…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.27
pimSGJoinSPT Whether DC-PIM is attempting to join to the shortest-path tree for this (S,G). This field is only relevant for PIM-SM.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.28
pimSGRPBit Whether this (S,G) state points towards the RP. For example if DC-PIM has received Join(*,G)s from two downstream routers A and B, and then receives a Prune(S,G,rpt) from A when A switches to the SPT, it …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.6.1.29

The (conceptual) table listing the interface-specific (S,G)
state that the entity maintains.
          
For MGMD Proxy or Snooping, (S,G,I) state exists only
because of local group membership requirements that DC-PIM
has learned from the MGMD Router implementation.

pimSGIEntry row .1.2.826.42.1.1578918.5.71.1.1.1.7.1

An entry (conceptual row) in the pimSGITable.

Indexes

pimTmEntIndex pimSGAddressType pimSGGrpAddress pimSGSrcAddress pimSGIIfIndex

Column	Syntax	OID
pimSGIIfIndex The ifIndex of the interface that this entry corresponds to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.1
pimSGIPimMode Whether this entry represents a PIM-SM ASM (Any-Source Multicast, used with PIM-SM), PIM-SM SSM (Single-Source Multicast, used with PIM-SM), PIM-DM (Dense mode) or BIDIR-PIM (bidirectional mode) group. Fo…	PimGroupMode Type Values: 1 none 2 ssm 3 asm 4 bidir 5 other 6 dense	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.2
pimSGIUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.3
pimSGILocalMembership Whether the local router has (S,G) local membership on this interface (resulting from a mechanism such as IGMPv3 or MLDv2). This corresponds to local_receiver_include(S,G,I) in the PIM-SM and PIM-DM specifications (RFC…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.4
pimSGIJoinPruneState The state resulting from (S,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G) state machine in the PIM-SM and PIM-DM specifications (RFC4601 and RFC3…	Enumeration Enumerated Values: 1 noInfo 2 join 3 prunePending 4 pruned	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.5
pimSGIPrunePendingTimer The time remaining before the local router acts on an (S,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This ti…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.6
pimSGIJoinExpiryTimer The time remaining before (S,G) Join state for this interface expires. This timer is called the (S,G) Join Expiry Timer in the PIM-SM specification (RFC4601). This object is zero if the timer is not running. This tim…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.7
pimSGIAssertState The (S,G) Assert state for this interface. This corresponds to the state of the per-interface (S,G) Assert state machine in the PIM-SM and PIM-DM specifications (RFC4601 and RFC3973 respectively). This f…	Enumeration Enumerated Values: 1 noInfo 2 iAmAssertWinner 3 iAmAssertLoser	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.8
pimSGIAssertTimer If pimSGIAssertState is 'iAmAssertWinner', for a PIM-SM group this is the time remaining before the local router next sends a (S,G) Assert message on this interface; for a PIM-DM group this is the time remaining before …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.9
pimSGIAssertWinnerAddressType If pimSGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0). DC-PIM returns 'ipv4', 'ipv6' or 'unknown' for this object. Th…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.10
pimSGIAssertWinnerAddress If pimSGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimSGIAssertWinnerAddressType object. This field is ignored if pimTmEntMgmdProxy is…	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.11
pimSGIAssertWinnerMetricPref If pimSGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the source advertised by the assert winner; otherwise, this object is zero. This field is ignored if pimTmEntMgmdPro…	Unsigned32 Constraints: range: 0-2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.12
pimSGIAssertWinnerMetric If pimSGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the source advertised by the assert winner; otherwise, this object is zero. This field is ignored if pimTmEntMgmdProxy …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.7.1.13

The (conceptual) table listing the non-interface specific
(S,G,rpt) state that the entity maintains.
          
This MIB table is not used for MGMD Snooping or PIM-DM or
BIDIR-PIM, nor for MGMD Proxy (except in the deprecated
mode), so is empty if pimTmEntMgmdProxy is set to 'false'
and 'sparse' is clear for pimTmEntMode.

pimSGRptEntry row .1.2.826.42.1.1578918.5.71.1.1.1.8.1

An entry (conceptual row) in the pimSGRptTable.

Indexes

pimTmEntIndex pimStarGAddressType pimStarGGrpAddress pimSGRptSrcAddress

Column	Syntax	OID
pimSGRptSrcAddress The source address for this entry. The InetAddressType is given by the pimStarGAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.8.1.1
pimSGRptUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.8.1.2
pimSGRptUpstreamPruneState Whether the local router should prune the source off the RP tree. This corresponds to the state of the upstream (S,G,rpt) state machine for triggered messages in the PIM-SM specification (RFC4601).	Enumeration Enumerated Values: 1 rptNotJoined 2 pruned 3 notPruned	.1.2.826.42.1.1578918.5.71.1.1.1.8.1.3
pimSGRptUpstreamOverrideTimer The time remaining before the local router sends a triggered (S,G,rpt) Join message on pimStarGRPFIfIndex. This timer is called the (S,G,rpt) Upstream Override Timer in the PIM-SM specification (RFC4601). This object i…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.8.1.4

The (conceptual) table listing the interface-specific
(S,G,rpt) state that the entity maintains.
          
For MGMD Proxy or Snooping, or PIM-DM or BIDIR-PIM,
(S,G,I,rpt) state exists only because of local group
membership requirements that DC-PIM has learned from the
MGMD Router implementation.

pimSGRptIEntry row .1.2.826.42.1.1578918.5.71.1.1.1.9.1

An entry (conceptual row) in the pimSGRptITable.

Indexes

pimTmEntIndex pimStarGAddressType pimStarGGrpAddress pimSGRptSrcAddress pimSGRptIIfIndex

Column	Syntax	OID
pimSGRptIIfIndex The ifIndex of the interface that this entry corresponds to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.826.42.1.1578918.5.71.1.1.1.9.1.1
pimSGRptIUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.9.1.2
pimSGRptILocalMembership Whether the local router has both (*,G) include local membership and (S,G) exclude local membership on this interface (resulting from a mechanism such as IGMPv3 or MLDv2). This corresponds to local_receiver_exclude(S,G…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.9.1.3
pimSGRptIJoinPruneState The state resulting from (S,G,rpt) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G,rpt) state machine in the PIM-SM specification (RFC4601). …	Enumeration Enumerated Values: 1 noInfo 2 prune 3 prunePending	.1.2.826.42.1.1578918.5.71.1.1.1.9.1.4
pimSGRptIPrunePendingTimer The time remaining before the local router starts pruning this source off the RP tree. This timer is called the (S,G,rpt) Prune-Pending Timer in the PIM-SM specification (RFC4601). This object is zero if the timer is …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.9.1.5
pimSGRptIPruneExpiryTimer The time remaining before (S,G,rpt) Prune state for this interface expires. This timer is called the (S,G,rpt) Prune Expiry Timer in the PIM-SM specification (RFC4601). This object is zero if the timer is not running. …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.9.1.6

This table is used to create and manage static configuration
of RPs and group ranges.
          
If the group prefixes configured for two or more rows in
this table overlap, the row with the greatest value of
pimStaticRPGrpPrefixLength is used for the overlapping
range.
          
DC-PIM creates default rows in this table at startup to
correspond to the SSM ranges defined by IANA.  The
administrator is permitted to modify and destroy these rows,
or create other rows for different group prefixes.
          
If DC-PIM supports dense mode groups, the network
administrator must create group ranges in this table to
indicate the multicast groups which should be treated as
dense mode.
          
Bidir and PIM-SM ASM group ranges can be configured in this
table and/or learned dynamically via BSR.  To configure
multiple RPs for the same group range, see
pimStaticRPMultiTable.
          
This table is not used if pimTmEntMgmdProxy is set to
'true', or pimTmEntMode is set to 'mgmd-snooping' or
'mgmd-proxy'.

pimStaticRPEntry row .1.2.826.42.1.1578918.5.71.1.1.1.11.1

An entry (conceptual row) in the pimStaticRPTable.

Indexes

pimTmEntIndex pimStaticRPAddressType pimStaticRPGrpAddress pimStaticRPGrpPrefixLength

Column	Syntax	OID
pimStaticRPAddressType The address type of this entry. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.11.1.1
pimStaticRPGrpAddress The multicast group address which, when combined with pimStaticRPGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by the pimStaticRPAddressType object. This address ob…	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.11.1.2
pimStaticRPGrpPrefixLength The multicast group prefix length, which, when combined with pimStaticRPGrpAddress, gives the group prefix for this entry. The InetAddressType is given by the pimStaticRPAddressType object. If pimStaticRPAddressType i…	Unsigned32 Constraints: range: 4-128	.1.2.826.42.1.1578918.5.71.1.1.1.11.1.3
pimStaticRPRPAddress The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the pimStaticRPAddressType object. This field can only be set to a non-zero value if pimStaticRPPi…	OctetStringr/w Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.11.1.4
pimStaticRPPimMode The PIM mode to be used for groups in this group prefix. DC-PIM does not support the value 'other' for this object. If this object is set to 'ssm', 'dense' or 'none', then pimStaticRPRPAddr…	PimGroupModer/w Type Values: 1 none 2 ssm 3 asm 4 bidir 5 other 6 dense	.1.2.826.42.1.1578918.5.71.1.1.1.11.1.5
pimStaticRPOverrideSubranges Whether this static RP configuration will override other RP information learned for groups in this group prefix. If this object is TRUE, then this object will override: - RP information le…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.11.1.6
pimStaticRPRowStatus The status of this row, by which rows in this table can be created and destroyed. This status object cannot be set to active(1) before a valid value has been written to pimStaticRPRPAddress. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.2.826.42.1.1578918.5.71.1.1.1.11.1.8
pimStaticRPAdminStatus The desired administrative state of this row.	DC-MASTER-TCAdminStatusr/w Type Values: 1 adminStatusUp 2 adminStatusDown	.1.2.826.42.1.1578918.5.71.1.1.1.11.1.51

This table is used to create and manage Anycast-RP via PIM
Register messages (draft-ietf-pim-anycast-rp), as opposed to
via other protocols such as MSDP.
          
Entries must be configured in this table if and only if the
local router is a member of one or more Anycast-RP sets,
that is, one or more Anycast-RP addresses are assigned to
the local router.  Note that if using static RP
configuration, this is in addition to, not instead of, the
pimStaticRP[Multi]Table entries that must be configured for
the Anycast-RPs.
          
The set of rows with the same values of both
pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress
corresponds to the Anycast-RP set for that Anycast-RP
address.  The maximum number of remote routers in an
Anycast-RP set is given by the value of the customizable
constant QPTM_ANYCAST_RP_MAX_REM_RTR.
          
Exactly one entry per Anycast-RP set corresponds to the
local router.  That entry is identified by the
pimAnycastRPSetLocalRouter object, and determines the source
address used by the local router when forwarding PIM
Register messages to the other routers in the Anycast-RP
set.
          
This table is only used by PIM-SM.  Rows are ignored if
any of the following are true:
          
- pimTmEntMgmdProxy is set to 'true'
          
- 'sparse' is clear for pimTmEntMode.

pimAnycastRPSetEntry row .1.2.826.42.1.1578918.5.71.1.1.1.12.1

An entry corresponds to a single remote router within a
particular Anycast-RP set.

Indexes

pimTmEntIndex pimAnycastRPSetAddressType pimAnycastRPSetAnycastAddress pimAnycastRPSetRouterAddress

Column	Syntax	OID
pimAnycastRPSetAddressType The address type of the Anycast-RP address and router address. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.12.1.1
pimAnycastRPSetAnycastAddress The Anycast-RP address. The InetAddressType is given by the pimAnycastRPSetAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.12.1.2
pimAnycastRPSetRouterAddress The address of a router that is a member of the Anycast-RP set. This must not be the same as pimAnycastRPSetAnycastAddress. The InetAddressType is given by the pimAnycastRPSetAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.12.1.3
pimAnycastRPSetRowStatus The status of this row, by which rows in this table can be created and destroyed. All writeable objects in this entry can be modified when the status of this entry is active(1).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.2.826.42.1.1578918.5.71.1.1.1.12.1.4
pimAnycastRPSetLocalRouter Whether this entry corresponds to the local router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.12.1.5
pimAnycastRPSetAdminStatus The desired administrative state of this row.	DC-MASTER-TCAdminStatusr/w Type Values: 1 adminStatusUp 2 adminStatusDown	.1.2.826.42.1.1578918.5.71.1.1.1.12.1.51

The (conceptual) table listing mappings from multicast group
prefixes to the PIM mode and RP address to use for groups
within that group prefix.
          
Rows in this table are created for a variety of reasons,
indicated by the value of the pimGroupMappingOrigin object.
          
-  Rows with a pimGroupMappingOrigin value of 'embedded' are
created by the router for each Embedded-RP group-to-RP
mapping which corresponds to a group for which the PIM
router maintains protocol state.
          
-  Rows with a pimGroupMappingOrigin value of 'config' are
created and destroyed as a result of configuration of
pimStaticRP[Multi]Table being created and destroyed.
Additionally, DC-PIM creates default rows in the
pimStaticRPTable table at startup to correspond to the
SSM ranges defined by IANA.  The administrator is
permitted to modify and destroy the SSM range
configuration.
          
-  Rows with a pimGroupMappingOrigin value of 'bsr' are
created as a result of running the PIM Bootstrap Router
(BSR) mechanism.  If the local router is not the elected
BSR, these rows are created to correspond to group
prefixes in the PIM Bootstrap messages received from the
elected BSR.  If the local router is the elected BSR,
these rows are created to correspond to group prefixes in
the PIM Bootstrap messages that the local router sends.
In either case, these rows are destroyed when the group
prefixes are timed out by the BSR mechanism.
          
Given the collection of rows in this table at any point in
time, the PIM mode and RP address to use for a particular
group is determined using the following algorithm.  This
algorithm has minor aspects which are specific to DC-PIM.
          
1) If the group corresponds to the well-defined prefixes of
link-local and unroutable group addresses, it cannot be used
as a PIM group.  There are no rows in the
pimGroupMappingTable corresponding to these prefixes.
          
2) If the group corresponds to the format defined in the
Embedded-RP mechanism [RFC3956] where the RP address is
embedded in the multicast group address, the RP address is
extracted from the group address and pimGroupMappingPimMode
is 'asm'.
          
3) From the set of all rows in the pimGroupMappingTable, the
subset whose group prefix contains the group in question is
selected.
          
4) If there are no such rows, the group cannot be used for
PIM.
          
5) If there are multiple selected rows, and a subset is
defined by pimStaticRP[Multi]Table (pimGroupMappingOrigin
value of 'config') with pimStaticRPOverrideSubranges /
pimStaticRPMultiOverrideSubrngs set to TRUE, then this
subset is selected.
          
6) From the selected subset of rows, the subset that has the
greatest value of pimGroupMappingGrpPrefixLength is
selected.
          
7) If there are still multiple selected rows, the subset
that has the highest precedence (the lowest numerical value
for pimGroupMappingPrecedence) is selected.
          
8) If there are still multiple selected mappings, and a
subset is associated with the BIDIR-PIM protocol rather than
the PIM-SM protocol, this subset is selected.
          
9) If there are still multiple selected mappings, the subset
with the numerically lowest priority vector is selected.
For a BSR mapping, the priority vector is simply the RP
priority; for a configured mapping, it is whether the RP is
unreachable, then the RP priority.
          
10) If there are still multiple selected mappings, the
algorithm specified by pimTmEntRPMultipathAlgorithm is used
to select one or more mappings - unless that mechanism is
disabled (via pimTmEntBsrRPMultipathMode for BSR mappings,
or via pimTmEntBidirDataMonitorEnable for BIDIR mappings).
          
11) If there are still multiple selected rows, the highest
RP address is selected.
          
12) The group mode to use is given by the value of
pimGroupMappingPimMode from the single selected row; the RP
to use is given by the value of pimGroupMappingRPAddress.
          
This table is not used by MGMD snooping or proxy (except in
the deprecated mode enabled by pimTmEntMgmdProxy).

pimGroupMappingEntry row .1.2.826.42.1.1578918.5.71.1.1.1.13.1

An entry (conceptual row) in the pimGroupMappingTable.

Indexes

pimTmEntIndex pimGroupMappingOrigin pimGroupMappingAddressType pimGroupMappingGrpAddress pimGroupMappingGrpPrefixLength pimGroupMappingRPAddress

Column	Syntax	OID
pimGroupMappingOrigin The mechanism by which this group mapping was learned.	PimGroupMappingOriginType Type Values: 1 static 2 config 3 bsr 4 embedded 5 other	.1.2.826.42.1.1578918.5.71.1.1.1.13.1.1
pimGroupMappingAddressType The address type of the IP multicast group prefix. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.2.826.42.1.1578918.5.71.1.1.1.13.1.2
pimGroupMappingGrpAddress The IP multicast group address which, when combined with pimGroupMappingGrpPrefixLength, gives the group prefix for this mapping. The InetAddressType is given by the pimGroupMappingAddressType object.	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.13.1.3
pimGroupMappingGrpPrefixLength The multicast group prefix length, which, when combined with pimGroupMappingGrpAddress, gives the group prefix for this mapping. The InetAddressType is given by the pimGroupMappingAddressType object. If pimGroupMappin…	Unsigned32 Constraints: range: 4-128	.1.2.826.42.1.1578918.5.71.1.1.1.13.1.4
pimGroupMappingRPAddress The IP address of the RP to be used for groups within this group prefix, or zero if no RP is to be used or if the RP address is unknown. The InetAddressType is given by the pimGroupMappingAddressType object. …	OctetString Constraints: range: 4-4 range: 16-16	.1.2.826.42.1.1578918.5.71.1.1.1.13.1.6
pimGroupMappingPimMode The PIM mode to be used for groups in this group prefix.	PimGroupMode Type Values: 1 none 2 ssm 3 asm 4 bidir 5 other 6 dense	.1.2.826.42.1.1578918.5.71.1.1.1.13.1.7
pimGroupMappingPrecedence The precedence of this row, used in the algorithm that determines which row applies to a given group address (described above). Numerically higher values for this object indicate lower precedences, with the value zero …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.13.1.8
pimGroupMappingIsInactive Flag indicating whether this Group Mapping is currently inactive. If this flag is set to 'true' then this row is not currently in use - no group addresses will be matched to this Group Mapping. This is a…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.13.1.51

This table lists the statistics for PIM neighbors.
          
Note that if a neighbor's Liveness Timer expires (including
on receipt of a PIM Hello message with a zero Holdtime),
this event resets all of the statistics in this table.
However, if a neighbor's Generation ID value changes, none
of the statistics in this table are affected.
          
This table is not used for MGMD Snooping or Proxy.

pimNbrStatsEntry row .1.2.826.42.1.1578918.5.71.1.1.1.14.1

An entry (conceptual row) in the pimNbrStatsTable.

Indexes

No indexes recorded

Column	Syntax	OID
pimNbrStatsNumRecvHello The number of valid PIM Hello messages that have been received from this neighbor.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.1
pimNbrStatsNumRecvJoinPrune The number of valid PIM Join/Prune messages that have been received from this neighbor.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.2
pimNbrStatsNumRecvAssert The number of valid PIM Assert messages that have been received from this neighbor.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.3
pimNbrStatsNumRecvBSM The number of valid PIM Bootstrap messages that have been received from this neighbor.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.4
pimNbrStatsNumErrJoinPrune The number of PIM Join/Prune messages that have been received from this neighbor that have contained errors. Note that this does not include messages for which the RP in the message differs from the RP known by the loca…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.5
pimNbrStatsNumErrAssert The number of PIM Assert messages that have been received from this neighbor that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.6
pimNbrStatsNumErrBSM The number of PIM Bootstrap messages that have been received from this neighbor that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.7
pimNbrStatsNumRecvGraft The number of Graft messages which have been received from this neighbor. If 'dense' is clear for pimTmEntMode, this count will be zero. Any received Graft messages will count towards the value of pimNmE…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.12
pimNbrStatsNumErrGraft The number of badly formatted Graft messages received from this neighbor. This count is incremented even if 'dense' is clear for pimTmEntMode.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.13
pimNbrStatsNumRecvGraftAck The number of Graft Ack messages which have been received from this neighbor. If 'dense' is clear for pimTmEntMode, this count will be zero. Any received Graft Ack messages will count towards the value o…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.14
pimNbrStatsNumErrGraftAck The number of badly formatted Graft Ack messages received from this neighbor. This count is incremented even if 'dense' is clear for pimTmEntMode.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.15
pimNbrStatsNumRecvStateRefresh The number of State Refresh messages which have been received from this neighbor. If 'dense' is clear for pimTmEntMode, or the TM entity is configured not to support State Refresh messages (pimTmEntStateR…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.16
pimNbrStatsNumErrStateRefresh The number of badly formatted State Refresh messages received from this neighbor. This count is incremented even if 'dense' is clear for pimTmEntMode, or the TM entity is configured not to support State R…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.17
pimNbrStatsNumRecvDFElection The number of DF election messages which have been received from this neighbor. If 'bidir' is clear for pimTmEntMode, this count will be zero. Any received DF election messages will count towards the val…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.18
pimNbrStatsNumErrDFElection The number of badly formatted DF election messages received from this neighbor. This count is incremented even if 'bidir' is clear for pimTmEntMode.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.19
pimNbrStatsNumRecvJoinedSrcs The total number of joined sources that have been received in valid PIM Join/Prune messages from this neighbor.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.20
pimNbrStatsNumRecvPrunedSrcs The total number of pruned sources that have been received in valid PIM Join/Prune messages from this neighbor.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.14.1.21

This table lists the statistics for {interface, IP version}
pairs for which PIM is enabled.
          
Note that any messages filtered out by
pimInterfaceNeighborFilter do not contribute to any
statistics in this table except for
pimIfStatsNumFilteredOut.
          
The statistics in this table can be cleared using the
pimNmEntClearStatsCounters field.
          
This table is not used for MGMD Snooping or Proxy.

pimIfStatsEntry row .1.2.826.42.1.1578918.5.71.1.1.1.15.1

An entry (conceptual row) in the pimIfStatsTable.

Indexes

No indexes recorded

Column	Syntax	OID
pimIfStatsNumSentHello The number of PIM Hello messages that have been sent out this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.1
pimIfStatsNumSentJoinPrune The number of PIM Join/Prune messages that have been sent out this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.2
pimIfStatsNumSentAssert The number of PIM Assert messages that have been sent out this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.3
pimIfStatsNumSentBsm The number of PIM Bootstrap Router messages that have been sent out this interface. DC-PIM always multicasts this type of message.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.4
pimIfStatsNumErrHello The number of PIM Hello messages that have been received on this interface that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.5
pimIfStatsNumRecvUnknownNbr The number of PIM Join/Prune, Assert, DF Election, and multicast Bootstrap Router messages that have been received on this interface from a neighbor from which we had not previously received a valid PIM Hello message (a…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.6
pimIfStatsNumUnknownHelloOpt The number of unknown options that have been received in PIM Hello messages on this interface. This value will include any PIM Hellos received with the known Cisco proprietary option 65004.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.7
pimIfStatsNumFilteredOut The number of link-local multicast PIM messages filtered out by pimInterfaceNeighborFilter on this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.8
pimIfStatsNumSentGraft The number of Graft messages which have been sent out of this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.12
pimIfStatsNumSentGraftAck The number of Graft Ack messages which have been sent out of this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.13
pimIfStatsNumSentStateRefresh The number of State Refresh messages which have been sent out of this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.14
pimIfStatsNumSentDFElection The number of DF election messages which have been sent out of this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.15
pimIfStatsNumRecvHello The number of valid PIM Hello messages that have been received on this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.16
pimIfStatsNumRecvJoinPrune The number of valid PIM Join/Prune messages that have been received on this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.17
pimIfStatsNumRecvAssert The number of valid PIM Assert messages that have been received on this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.18
pimIfStatsNumRecvUnknownType The number of PIM messages with an unknown PIM message type that have been received on this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.19
pimIfStatsNumRecvBadChecksum The number of PIM messages with a incorrect PIM checksum that have been received on this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.20
pimIfStatsTimeToNxtHello The time (in milliseconds) until the next Hello message is sent on this interface if the Hello timer is running, or zero otherwise.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.21
pimIfStatsNumSentJoinedSrcs The total number of joined sources that have been sent in PIM Join/Prune messages on this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.22
pimIfStatsNumSentPrunedSrcs The total number of pruned sources that have been sent in PIM Join/Prune messages on this interface.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.15.1.23

This table is used to create and manage DC-PIM Neighbor
Manager entities.
          
There is no reason to create rows in this table if
pimTmEntMode is always set to 'mgmd-snooping' or
'mgmd-proxy'.

pimNmEntEntry row .1.2.826.42.1.1578918.5.71.1.1.1.16.1

Each entry represents an instance of the DC-PIM Neighbor
Manager entity.

Indexes

pimNmEntIndex

Column	Syntax	OID
pimNmEntIndex The index of this pimNmEntEntry. This is the HAF entity index passed on the entity create parameters.	DC-MASTER-TCNumericIndex Type Constraints: range: 1..2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.1
pimNmEntRowStatus Used to create and delete a DC-PIM Neighbor Manager Entity Table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.2
pimNmEntAdminStatus The desired administrative state of the DC-PIM Neighbor Manager entity.	DC-MASTER-TCAdminStatusr/w Type Values: 1 adminStatusUp 2 adminStatusDown	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.3
pimNmEntOperStatus The current operational state of the DC-PIM Neighbor Manager entity.	DC-MASTER-TCNpgOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed 8 operStatusFailed 10 operStatusFailedPerm 11 operStatusFailing	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.4
pimNmEntTmEntIndex The HAF entity index value of the DC-PIM TIB Manager to join to. Once set, the value of this object cannot be changed.	DC-MASTER-TCNumericIndexr/w Type Constraints: range: 1..2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.5
pimNmEntI3JoinOperStatus The current operational state of the I3 join. pimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a v…	DC-MASTER-TCNpgOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed 8 operStatusFailed 10 operStatusFailedPerm 11 operStatusFailing	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.6
pimNmEntNmiJoinOperStatus The current operational state of the NMI join. pimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a …	DC-MASTER-TCNpgOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed 8 operStatusFailed 10 operStatusFailedPerm 11 operStatusFailing	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.7
pimNmEntSckJoinOperStatus The current operational state of the SCK join. pimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a …	DC-MASTER-TCNpgOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed 8 operStatusFailed 10 operStatusFailedPerm 11 operStatusFailing	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.8
pimNmEntClearStatsCounters Set this object to 'true' to cause DC-PIM Neighbor Manager to reset all its statistics counters (that is, all objects with syntax PimStatsCounter that are either in the pimNmEntStatsTable, or in a row of the pimIfStatsT…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.9
pimNmEntStatsUpTime The time since the statistics counters were last reset, either by establishing the NMI join (caused by activating DC-PIM TIB Manager or DC-PIM Neighbor Manager, or by recovery after NMI join failure/fail-over) or by set…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.10
pimNmEntEnableUnicastMessages Set this object to 'true' to enable DC-PIM Neighbor Manager to send and receive unicast PIM messages. This object must only be set to 'false' if the local router will never be an RP for any multicast grou…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.11
pimNmEntAcceptUnicastBsms Set this object to 'true' to enable DC-PIM Neighbor Manager to accept PIM Bootstrap Messages (BSMs) which are sent to DC-PIM as unicast messages. Setting the object to 'false' means that DC-PIM Neighbor Manager ignores…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.12
pimNmEntCrpAdvFilterIndex Set this object to zero to disable Candidate-RP Advertisement filtering. This means that the local router will process a Candidate-RP Advertisement message from any source IP address. Set this object to …	DC-MASTER-TCStdAccessListListIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.13
pimNmEntBfdEntityIndex Identifies a BFD stub entity to which the Neighbor Manager will join. A value of zero indicates that no BFD provider is available, or that NM should not join to any BFD provider. If a BFD j…	DC-MASTER-TCNumericIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.14
pimNmEntBfdJoinOperStatus The current operational state of the BFD join. If pimNmEntBfdEntityIndex is non-zero, pimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'o…	DC-MASTER-TCNpgOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed 8 operStatusFailed 10 operStatusFailedPerm 11 operStatusFailing	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.15
pimNmEntTenantName Name of the tenant which owns this PIM instance	OctetStringr/w	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.16
pimNmEntTenantId ID of the tenant which owns this PIM instance	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.17
pimNmEntEnableAlarms Enables alarms on this PIM instance	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.18
pimNmEntRtmIndex Identifies a rtm index used for stubs.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.2.826.42.1.1578918.5.71.1.1.1.16.1.19

This table lists the statistics for DC-PIM Neighbor Manager
entities.
          
Note that any messages filtered out by
pimInterfaceNeighborFilter do not contribute to any
statistics in this table.
          
Note that in the case of critical parsing errors, only the
first error encountered will be counted.  The checks are
made in the following order.
          
- Length.
- Checksum.
- Message type.
- Version.
          
This table is not used for MGMD Snooping or Proxy.

pimNmEntStatsEntry row .1.2.826.42.1.1578918.5.71.1.1.1.17.1

Each entry represents the statistics for a DC-PIM Neighbor
Manager entity.

Indexes

No indexes recorded

Column	Syntax	OID
pimNmEntStatsNumSentCRPAdvert The number of PIM Candidate-RP-Advertisement messages that have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.1
pimNmEntStatsNumSentRegister The number of PIM Register messages that have been sent by this DC-PIM Neighbor Manager entity. Note that this only includes PIM Register messages forwarded to other members of Anycast-RP sets, and Null-R…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.2
pimNmEntStatsNumSentRegisterStop The number of PIM Register-Stop messages that have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.3
pimNmEntStatsNumRecvCRPAdvert The number of valid PIM Candidate-RP-Advertisement messages that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.4
pimNmEntStatsNumRecvRegister The number of valid PIM Register messages that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.5
pimNmEntStatsNumRecvRegisterStop The number of valid PIM Register-Stop messages that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.6
pimNmEntStatsNumErrCRPAdvert The number of PIM Candidate-RP-Advertisement messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.7
pimNmEntStatsNumErrRegister The number of PIM Register messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.8
pimNmEntStatsNumErrRegisterStop The number of PIM Register-Stop messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.9
pimNmEntStatsNumRecvIgnoredType The number of PIM messages with a known but unsupported PIM message type that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.10
pimNmEntStatsNumRecvUnknownType The number of PIM messages with an unknown PIM message type that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.11
pimNmEntStatsNumRecvUnknownVer The number of PIM messages with an unknown PIM version that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.12
pimNmEntStatsNumRecvBadChecksum The number of PIM messages with a incorrect PIM checksum that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.13
pimNmEntStatsNumRecvBadLength The number of PIM messages with a length too short to contain a common PIM header that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.14
pimNmEntStatsNumCRPAdvfiltered The number of C-RP-Advertisement messages which have been filtered out by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.15
pimNmEntStatsNumRecvHello The number of valid PIM Hello messages that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.17
pimNmEntStatsNumErrHello The number of PIM Hello messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.18
pimNmEntStatsNumRecvJoinPrune The number of valid PIM Join/Prune messages that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.19
pimNmEntStatsNumRecvAssert The number of valid PIM Assert messages that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.20
pimNmEntStatsNumRecvBSM The number of valid PIM Bootstrap messages that have been received by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.21
pimNmEntStatsNumErrJoinPrune The number of PIM Join/Prune messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors. Note that this does not include messages for which the RP in the message differs from the…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.22
pimNmEntStatsNumErrAssert The number of PIM Assert messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.23
pimNmEntStatsNumErrBSM The number of PIM Bootstrap messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.24
pimNmEntStatsNumRecvGraft The number of Graft messages which have been received by this DC-PIM Neighbor Manager entity. If 'dense' is clear for pimTmEntMode, this count will be zero. Any received Graft messages will count towards…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.25
pimNmEntStatsNumErrGraft The number of badly formatted Graft messages received by this DC-PIM Neighbor Manager entity. This count is incremented even if 'dense' is clear for pimTmEntMode.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.26
pimNmEntStatsNumRecvGraftAck The number of Graft Ack messages which have been received by this DC-PIM Neighbor Manager entity. If 'dense' is clear for pimTmEntMode, this count will be zero. Any received Graft Ack messages will count…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.27
pimNmEntStatsNumErrGraftAck The number of badly formatted Graft Ack messages received by this DC-PIM Neighbor Manager entity. This count is incremented even if 'dense' is clear for pimTmEntMode.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.28
pimNmEntStatsNumRecvStateRefresh The number of State Refresh messages which have been received by this DC-PIM Neighbor Manager entity. If 'dense' is clear for pimTmEntMode, or the TM entity is configured not to support State Refresh mess…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.29
pimNmEntStatsNumErrStateRefresh The number of badly formatted State Refresh messages received by this DC-PIM Neighbor Manager entity. This count is incremented even if 'dense' is clear for pimTmEntMode, or the TM entity is configured no…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.30
pimNmEntStatsNumRecvDFElection The number of DF election messages which have been received by this DC-PIM Neighbor Manager entity. If 'bidir' is clear for pimTmEntMode, this count will be zero. Any received DF election messages will c…	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.31
pimNmEntStatsNumErrDFElection The number of badly formatted DF election messages received by this DC-PIM Neighbor Manager entity. This count is incremented even if 'bidir' is clear for pimTmEntMode.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.32
pimNmEntStatsNumSentHello The number of valid PIM Hello messages that have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.33
pimNmEntStatsNumSentJoinPrune The number of valid PIM Join/Prune messages that have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.34
pimNmEntStatsNumSentAssert The number of valid PIM Assert messages that have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.35
pimNmEntStatsNumSentBSM The number of valid PIM Bootstrap messages that have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.36
pimNmEntStatsNumSentGraft The number of Graft messages which have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.37
pimNmEntStatsNumSentGraftAck The number of Graft Ack messages which have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.38
pimNmEntStatsNumSentStateRefresh The number of State Refresh messages which have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.39
pimNmEntStatsNumSentDFElection The number of DF election messages which have been sent by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.40
pimNmEntStatsNumRecvJoinedSrcs The total number of joined sources that have been received in valid PIM Join/Prune messages by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.41
pimNmEntStatsNumRecvPrunedSrcs The total number of pruned sources that have been received in valid PIM Join/Prune messages by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.42
pimNmEntStatsNumSentJoinedSrcs The total number of joined sources that have been sent in PIM Join/Prune messages by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.43
pimNmEntStatsNumSentPrunedSrcs The total number of pruned sources that have been sent in PIM Join/Prune messages by this DC-PIM Neighbor Manager entity.	PimStatsCounter	.1.2.826.42.1.1578918.5.71.1.1.1.17.1.44