DC-LMP-PROD Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
38

dcLmpProductTable

table
.1.3.6.1.4.1.629.10.5.1.1 · 1 row entry · 38 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk dcLmpProductTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-LMP-PROD' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-LMP-PROD::dcLmpProductTable' 
The table of LMP entities.
dcLmpProductEntry row .1.3.6.1.4.1.629.10.5.1.1.1
Each entry represents an instance of the DC-LMP product.
Indexes
No indexes recorded
Column Syntax OID
dcLmpProductIndex
The index of this dcLmpProductEntry. This is the
HAF entity index passed on the entity create parameters.
DcLmpIndex .1.3.6.1.4.1.629.10.5.1.1.1.1
dcLmpProductNodeId
The Node ID for this LMP node.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.629.10.5.1.1.1.2
dcLmpProductSocketIfIndex
Management assigned interface identifier for the IP Sockets
component interface to DC-LMP.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.629.10.5.1.1.1.3
dcLmpProductSocketBufPoolSize
The number of buffers available for sending
sockets data to a given neighbor. This is used to pace
the sockets data flow. There can never be more than this
many outstanding unacked non-IPCC messages to a given neighbo…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.5.1.1.1.4
dcLmpProductDLMIBufPoolSize
The number of pre-reserved buffers available for interacting
with the DLM provider. This is used to ensure DLM
interactions do not fail in buffer shortage conditions.

Note that this field may not be alte…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.5.1.1.1.5
dcLmpProductResendInterval
The initial interval in milliseconds between resends of LMP
messages, where per-message type values are not provided.
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.6
dcLmpProductResendDelta
The default factor that governs the speed with which the
sender increases the retransmission interval.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.5.1.1.1.7
dcLmpProductHelloIntvalDflt
This object specifies the default value for the HelloInterval
parameter used in the Hello protocol keep-alive phase. It
indicates how frequently LMP Hello messages will be sent.

This field is used as the …
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.8
dcLmpProductHelloIntvalDfltMin
This object specifies the default minimum value for the
HelloInterval parameter. It is used as a default value
for lmpCcHelloIntervalMin.

This field can be set to zero to disable the LMP Hello
mechanism.
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.9
dcLmpProductHelloIntvalDfltMax
This object specifies the default maximum value for the
HelloInterval parameter. It is used as a default value
for lmpCcHelloIntervalMax.

This field can be set to zero to disable the LMP Hello
mechanism.
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.10
dcLmpProductHelloDeadIvlDflt
This object specifies the default HelloDeadInterval parameter to
use in the Hello protocol keep-alive phase. It indicates how long
a device should wait before declaring the control channel dead.

The Hello…
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.11
dcLmpProductHelloDeadIvlDfltMin
This object specifies the default minimum value for the
HelloDeadInterval parameter. It is used as a default value
for lmpCcHelloDeadIntervalMin.

This field can be set to zero to disable the LMP Hello
mec…
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.12
dcLmpProductHelloDeadIvlDfltMax
This object specifies the default maximum value for the
HelloDeadInterval parameter. It is used as a default value
for lmpCcHelloDeadIntervalMax.

This field can be set to zero to disable the LMP Hello
mec…
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.13
dcLmpProductLinkVerifyInterval
This object indicates how often the link verification
procedure is executed.

This field can be set to zero to disable periodic link
verification.
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.14
dcLmpProductLnkMismatchNotifEnbl
If this object is true, then it enables the
generation of lmpTeLinkPropertyMismatch
and lmpDataLinkPropertyMismatch notifications,
otherwise these notifications are not emitted.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.15
dcLmpProductUnprotNotifEnable
If this object is true, then it enables the
generation of lmpUnprotected notification,
otherwise these notifications are not emitted.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.16
dcLmpProductCcUpDownNotifEnable
If this object is true, then it enables the generation of
lmpControlChannelUp and lmpControlChannelDown notifications,
otherwise these notifications are not emitted.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.17
dcLmpProductTeLinkNotifEnable
If this object is true, then it enables the
generation of lmpTeLinkDegraded and lmpTeLinkNotDegraded
notifications, otherwise these notifications are not emitted.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.18
dcLmpProductTelCorrNotifEnable
If this object is true, then it enables the
generation of lmpTeLinkCorrelated notification,
otherwise these notifications are not emitted.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.19
dcLmpProductDataLinkNotifEnable
If this object is true, then it enables the
generation of lmpDataLinkVerificationFailure notifications,
otherwise these notifications are not emitted.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.20
dcLmpProductNeighborAutoGen
Denotes whether or not this instance of DC-LMP should
automatically generate new entries in the neighbor table
for new neighbors discovered during control channel
setup. This feature only applies to control channels
th…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.21
dcLmpProductTeLinkAutoLink
Denotes whether or not this instance of DC-LMP should
attempt to automatically correlate TE links with neighbor
nodes.

When this feature is enabled, then during link
correlation DC-LMP will attempt to per…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.22
dcLmpProductUniRepeatInterval
The interval in milliseconds between schedulings of UNI Service
Discovery. If 0, UNI is not scheduled repeatedly.
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.23
dcLmpProductUniCompletionIntval
The maximum allowed time in milliseconds of a UNI Service Discovery
exchange.
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.24
dcLmpDestIpAddrAsUni
OIF UNI specifies that Config, ConfigAck, ConfigNack and Hello
messages be sent to the neighbor's IPCC address (or the All-nodes
multicast address in the case of an in-fibre Config).
All other messages must be sent with…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.25
dcLmpProductRestarted
Flag to indicate whether DC-LMP has restarted following a
failure. If this is true, then for a period
_LMP_PRODUCT_RESTART_TIME_ after restarting, LinkSummary
messages are processed differently, according to the
sectio…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.26
dcLmpProductAdminStatus
The desired administrative state of the LMP entity.
DcLmpAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.629.10.5.1.1.1.27
dcLmpProductOperStatus
The current operational state of the LMP entity.
DcLmpOperStatus
Type Values:
1up
2down
3goingUp
4goingDown
5actFailed
 .1.3.6.1.4.1.629.10.5.1.1.1.28
dcLmpProductRowStatus
Used to create and delete an LMP Product Table entry.
Note that when this object is set to 'active', the
dcLmpProductSocketBufPoolSize and dcLmpProductDLMIBufPoolSize
objects in the row may not be modified.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.10.5.1.1.1.29
dcLmpProductWdmMode
This field is now deprecated. WDM is now configured on a per TE Link
and Control Channel basis. The lmpTeLinkDwdm and lmpCcWdmMode fields
should be used instead.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.30
dcLmpProductWdmRole
Indicates whether this LMP entity can operate in an WDM role and if
so whether it should take the role of a peer or optical line system
(OLS).
Enumerationr/w .1.3.6.1.4.1.629.10.5.1.1.1.31
dcLmpSrcIpAddrNodeID
Some LMP implementations use the Node ID as the source IP address in
LMP messages.

In UNI scenarios this is safe, because the Node ID is drawn from the
same address space as the interface addresses, and s…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.5.1.1.1.32
dcLmpProductExtendedHelloDeadIvl
When set to a non-zero value greater than
lmpCcHelloDeadIntervalNegotiated, the object overrides the
value of lmpCcHelloDeadIntervalNegotiated for a control
channel to indicate how long the device…
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.33
mrvLmpProductTestPort
The if_index of test port for LMP correlation procedure.
The test port used as LMP TEST signal injection origin.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.629.10.5.1.1.1.34
mrvLmpProductTestWavelength
The wavelength of test signal for LMP correlation procedure.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.5.1.1.1.35
mrvLmpProductLinkVerifyDeadInterval
This object specifies the VerifyDeadInterval parameter
used in the verification of the physical connectivity of
data-bearing links. It specifies the observation period
used to detect a Test message at the remote node.
millisecondsUnsigned32r/w .1.3.6.1.4.1.629.10.5.1.1.1.36
mrvLmpProductAttenWithEdfa
The default attenuation level for GMPLS tunnels when programming ROADM channel map
for the case when EDFA amplifier is used at the common ROADM port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.5.1.1.1.37
mrvLmpProductAttenWithoutEdfa
The default attenuation level for GMPLS tunnels when programming ROADM channel map
for the case when EDFA amplifier isn't used at the common ROADM port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.5.1.1.1.38