DC-LMGR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
36
.1.2.826.0.1.1578918.5.32.1.1.1 · 1 row entry · 27 columns
Uses the versa variant from /opt/observium/mibs/versa.
Command help
Walk dcLmgrLsrEntityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-LMGR-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-LMGR-MIB::dcLmgrLsrEntityTable'
Each entry represents an instance of the Label Manager.
Each instance is identified by LSR index.
dcLmgrLsrEntityEntry row .1.2.826.0.1.1578918.5.32.1.1.1.1
Each entry represents a Label Manager entity.
Column Syntax OID
LSR index for this dcLmgrLsrEntityEntry. This is the
entity index passed in the Label Manager create
parameters.
DcLmgrIndex .1.2.826.0.1.1578918.5.32.1.1.1.1.1
Administrative status for Label Manager. When
dcLmgrLsrEntityRowStatus is 'active' and
dcLmgrLsrEntityAdminStatus is 'up' Label Manager is
active and only these two fields and
dcLmgrLsrEntityMinLsiBuffers can be modifie…
DcLmgrAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
.1.2.826.0.1.1578918.5.32.1.1.1.1.2
The current operational status of the Label Manager
entity.
DcLmgrOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
.1.2.826.0.1.1578918.5.32.1.1.1.1.3
Row status for the Label Manager table entry, used to
create and destroy table entries. When
dcLmgrLsrEntityRowStatus is 'active' and
dcLmgrLsrEntityAdminStatus is 'up' Label Manager is
active and only these two fields …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.2.826.0.1.1578918.5.32.1.1.1.1.4
Minimum number of buffers to allocate for Label Switch
Interface requests. This number includes any buffers sent
to the Label Switch Controller and awaiting a response.

This field is deprecated and has n…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.1.1.5
Maximum number of buffers to allocate for Label Switch
Interface requests. A value of 0 means no maximum.

This field can not be changed when the row is active.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.1.1.6
Diagnostic field providing information about the status
of the Label Switch Controller as seen by Label Manager.
DcLmgrPartnerStatus
Type Values:
0initial
1activating
2active
3deactivating
4failedOver
5failed
6unavailable
.1.2.826.0.1.1578918.5.32.1.1.1.1.7
Diagnostic field providing information about the number
of active interfaces between Label Manager and the its
Label Database Interface users (DC-TPM and DC-RSVP).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.1.1.8
An ID that uniquely identifies this LSR within the
network.

The LSR ID is typically derived from one of the LSR's IPv4
addresses. It may be used for path vector based loop
detection if the signaling prot…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.1.1.9
The type of the internetwork layer address used as the
transport address. Currently this must be IPv4. See
dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
field for use in IPv6 networks.

The tran…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.2.826.0.1.1578918.5.32.1.1.1.1.10
The length of the internetwork layer address used as the
transport address for LDP Hello messages in the global
label space and for messages originating on unnumbered
interfaces in RSVP. Currently this must be an IPv4
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.1.1.11
The value of the internetwork layer address used as the
transport address for LDP Hello messages in the global
label space and for messages originating on unnumbered
interfaces in RSVP.

This must be an IP…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.2.826.0.1.1578918.5.32.1.1.1.1.12
The LSP control mode that this LSR should adopt.
This field is only used by Label Manager in systems where
it supports LDP and/or CR-LDP.
DcLmgrControlModesr/w
Type Values:
1ordered
2independent
.1.2.826.0.1.1578918.5.32.1.1.1.1.13
Whether this LSR should aim to merge LSPs, where permitted
by the underlying hardware.
This field is only used by Label Manager in systems where
it supports LDP and/or CR-LDP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.2.826.0.1.1578918.5.32.1.1.1.1.14
Whether this LSR should perform loop detection.
This field is only used by Label Manager in systems where
it supports LDP and/or CR-LDP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.2.826.0.1.1578918.5.32.1.1.1.1.15
Whether Label Manager should perform LSP grouping on
behalf of the LDBI user. This field is currently only
used for systems supporting RSVP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.2.826.0.1.1578918.5.32.1.1.1.1.16
Whether Label Manager should automatically activate or
deactivate static LSPs when the interfaces on which they
depend become active or inactive.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.2.826.0.1.1578918.5.32.1.1.1.1.17
Whether Label Manager should display the virtual cross
connects its sets up at the Egress node of Implicit Null
and Explicit Null LSPs in the mplsXcTable. These cross
connects do not represent real switch programming, …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.2.826.0.1.1578918.5.32.1.1.1.1.18
The value of the internetwork address used for messages
originating on unnumbered interfaces in RSVP in an IPv6
network.

This value also uniquely identifies this LSR within an
IPv6 network.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.2.826.0.1.1578918.5.32.1.1.1.1.19
Whether Label Manager should allow configuration of
static point-to-multipoint LSPs.

Disabling point-to-multipoint support causes any
statically configured point-to-multipoint LSPs to be
destroyed.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.2.826.0.1.1578918.5.32.1.1.1.1.20
The current state of support for static
point-to-multipoint LSPs. This field is set to true when
support for static point-to-multipoint LSPs is enabled.
It is set to false when support for static
point-to-multipoint LS…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.2.826.0.1.1578918.5.32.1.1.1.1.21
The index of the Label Switch Controller instance which
this LMGR is to join to as its LSI interface provider. If
this value is not specified, or the value of this object
is 0, LMGR will use the dcLmgrLsrEntityLsrIndex…
DC-MASTER-TCNumericIndexOrZeror/w
Type Constraints:
range: 0..2147483647
.1.2.826.0.1.1578918.5.32.1.1.1.1.22
The index of the I3 entity which this LMGR is to join to
as its I3 interface provider. If this value is not
specified, or the value of this object is 0, LMGR will use
the dcLmgrLsrEntityLsrIndex value as the LSR index …
DC-MASTER-TCNumericIndexOrZeror/w
Type Constraints:
range: 0..2147483647
.1.2.826.0.1.1578918.5.32.1.1.1.1.23
A length of time (in seconds) to wait after releasing an
MPLS label before the label will be released to the
general pool to be assigned to new LSPs.

Changes made to this value will not take effect while …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.1.1.24
The Global ID is defined in RFC 6370 and uniquely
identifies an operator. It is derived from a 4-octet AS
number assigned to the operator and is used solely to
provide a globally unique context for other MPLS-TP
identi…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.1.1.25
The Node ID is defined in RFC 6370 and is assigned by the
operator within the scope of a Global ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.1.1.26
The fault tolerant mode used by Label Manager if used in a
fault tolerant environment. The default value is full
replication which should be used in conjunction with full
replication in other MPLS components. This app…
DcLmgrFtModesr/w
Type Values:
1full
2recovery
.1.2.826.0.1.1578918.5.32.1.1.1.1.27
.1.2.826.0.1.1578918.5.32.1.1.2 · 1 row entry · 9 columns
Uses the versa variant from /opt/observium/mibs/versa.
Command help
Walk dcLmgrLsrLspXcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-LMGR-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-LMGR-MIB::dcLmgrLsrLspXcTable'
Each entry represents an instance of an LSP
cross-conect between a single in-segment and a
single out-segment.
dcLmgrLsrLspXcEntry row .1.2.826.0.1.1578918.5.32.1.1.2.1
Each entry represents an LSP cross connect.
Column Syntax OID
XC index for this dcLmgrLsrLspXc. This is the XC index
assigned by Label Manager for the LSP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.2.1.2
Index for the in segment. This is the index assigned
by Label Manager for the in segment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.2.1.3
If index for the in segment. This is the If index
specified on setting up the in segment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.2.1.4
Top label for the in segment. This is the Label assigned
by Label Manager Label Library for the in segment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.2.1.5
Index for the out segment. This is the index assigned
by Label Manager for the out segment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.2.1.6
Interface Index for the out segment. This is the
interface index specified when setting up the out segment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.2.1.7
Top label for the out segment. This is the label
specified by the remote LSR for the out segment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.2.826.0.1.1578918.5.32.1.1.2.1.8
The type of the next hop address for the out segment.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.2.826.0.1.1578918.5.32.1.1.2.1.9
Next hop address for the out segment. This is the address
specified by the remote LSR for the out segment.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.2.826.0.1.1578918.5.32.1.1.2.1.10