DC-BFD-STUB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
99

bfdEntityTable

table
.1.2.826.0.1.1578918.5.3.25.1.1 · 1 row entry · 21 columns
Open in standard view
Uses the versa variant from /opt/observium/mibs/versa.
Command help
Walk bfdEntityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-BFD-STUB-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-BFD-STUB-MIB::bfdEntityTable' 
The table of BFD stub entities.
bfdEntityEntry row .1.2.826.0.1.1578918.5.3.25.1.1.1
Each entry represents an instance of the BFD stub.
Indexes
Column Syntax OID
bfdEntityIndex
The index of this BFD stub instance. This is the
HAF entity index passed on the entity create parameters.

This is the sole index of this table.
DC-MASTER-TCNumericIndex
Type Constraints:
range: 1..2147483647
 .1.2.826.0.1.1578918.5.3.25.1.1.1.1
bfdAdminStatus
The global administrative status of BFD in this router.
The value adminStatusUp denotes that the BFD Process is
active; setting the value of this field to adminStatusDown
disables it on all interfaces.
DC-MASTER-TCAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.2.826.0.1.1578918.5.3.25.1.1.1.2
bfdOperStatus
The current operational state of the BFD entity.
DC-MASTER-TCNpgOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
8operStatusFailed
10operStatusFailedPerm
11operStatusFailing
 .1.2.826.0.1.1578918.5.3.25.1.1.1.3
bfdRowStatus
Used to create and delete a BFD entity table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.2.826.0.1.1578918.5.3.25.1.1.1.4
bfdVersionNumber
The current version number of the BFD protocol.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.1.1.5
bfdDesiredMinTxInterval
This object specifies the default minimum interval, in
microseconds, that the local system would like to use when
transmitting BFD Control packets. This value is used for
BFD sessions that do not have a corresponding e…
microsecondsBfdIntervalr/w
Type Constraints:
range: 1..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.1.1.6
bfdReqMinRxInterval
This object specifies the default minimum interval (in
microseconds) between received BFD control packets
that the local system will advertise itself as capable
of receiving. This value is used for BFD sessions that
do…
microsecondsBfdIntervalr/w
Type Constraints:
range: 1..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.1.1.7
bfdInterfaceScope
This object specifies the scope of interfaces supported by
this BFD instance.

This field has replaceOnlyWhileDisabled syntax.
DC-MASTER-TCInterfaceScoper/w
Type Constraints:
range: 0..3
 .1.2.826.0.1.1578918.5.3.25.1.1.1.8
bfdSendMsgMode
This object specifies the mode by which BFD protocol packets
are sent and received.

This field is not suitable for network administrators.
Any changes to this field only affect new BFD sessions
configured…
BfdSendMsgModeTyper/w
Type Values:
1direct
2sck
 .1.2.826.0.1.1578918.5.3.25.1.1.1.9
bfdSckBufferPoolSize
The size of the SCK join buffer pool.

This determines the maximum number of buffers that can
exist at once for the SCK join pool, used for requests to open IP
sockets. DC-BFD does not use pre-allocated p…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.1.1.10
bfdIpDataPoolCapacity
This object specifies the number of pre-reserved buffers
available for sending BFD protocol packets when using IP
encapsulation. This is used to pace the BFD packet flows.

This field is not suitable for …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.2.826.0.1.1578918.5.3.25.1.1.1.11
bfdEntityDebug
This object specifies Debug flags for
this BFD instance.
BfdDebugflagsr/w
Type Values:
0packets
1receive
2send
3session
4state
5timer
 .1.2.826.0.1.1578918.5.3.25.1.1.1.12
bfdEntityLevel
This object specifies level for
this BFD instance.
Unsigned32r/w
Constraints:
range: 1-4
 .1.2.826.0.1.1578918.5.3.25.1.1.1.13
bfdEntityAllFlagsEnabled
This object specifies all flags enabled for
this BFD instance.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.2.826.0.1.1578918.5.3.25.1.1.1.14
bfdEntityRtiName
This object specifies routing instance name
this BFD instance.
OctetStringr/w
Constraints:
range: 0-128
 .1.2.826.0.1.1578918.5.3.25.1.1.1.15
bfdEntityRxTxFlagsEnabled
This object specifies Rx/Tx flags enabled for
this BFD instance.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.2.826.0.1.1578918.5.3.25.1.1.1.16
bfdDisableLibrary
By default, when the BFD stub is compiled with the BFD
library present, the stub will use the library. This
field allows the library to be disabled for test purposes.

This field is not suitable for netwo…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.2.826.0.1.1578918.5.3.25.1.1.1.17
bfdVrfName
The text name of the VRF in which this entity instance is
running.

If this field is a zero-length string then it is assumed
that this entity instance is running in the 'global'
context.

Thi…
DC-MASTER-TCVrfNamer/w
Type Constraints:
range: 0..31
 .1.2.826.0.1.1578918.5.3.25.1.1.1.18
bfdBfdoBufferPoolSize
The size of the BFDO join buffer pool.

This determines the maximum number of buffers that can
exist at once for the BFDO join pool, used for requests to manage
offloaded BFD sessions. DC-BFD does not use…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.1.1.19
bfdPriBufferPoolSize
The size of the PRI join buffer pool.

This determines the maximum number of buffers that can
exist at once for the PRI join pool, used for requests to create
offloaded BFD sessions. DC-BFD does not use p…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.1.1.20
bfdEntityRestartTime
This is the startup timer duration that is used when
DC-BFD is activated and a BFDO master join is configured.

It specifies the length of time before DC-BFD deems that
auditing over the BFDO interface is …
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.1.1.21

bfdSessionTable

table
.1.2.826.0.1.1578918.5.3.25.1.2 · 1 row entry · 29 columns
Open in standard view
Uses the versa variant from /opt/observium/mibs/versa.
Command help
Walk bfdSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-BFD-STUB-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-BFD-STUB-MIB::bfdSessionTable' 
Test-only table that shows state of all BFD sessions and
allows the user to change settings dynamically.
bfdSessionEntry row .1.2.826.0.1.1578918.5.3.25.1.2.1
The BFD Session Entry describes BFD session.
Indexes
Column Syntax OID
bfdSessIndex
This object contains an index used to represent a
unique BFD session on this device.
BfdSessIndexTC
Type Constraints:
range: 1..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.1
bfdSessDiscriminator
This object specifies the local discriminator for this BFD
session, used to uniquely identify it.
Unsigned32
Constraints:
range: 1-4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.4
bfdSessRemoteDiscr
This object specifies the session discriminator chosen
by the remote system for this BFD session.
Unsigned32
Constraints:
range: 0-4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.5
bfdSessState
The perceived state of the BFD session.
Enumerationr/w
Enumerated Values:
1adminDown
2down
3init
4up
 .1.2.826.0.1.1578918.5.3.25.1.2.1.7
bfdSessDiag
A diagnostic code specifying the local system's reason
for the last transition of the session from up(1)
to some other state.
BfdDiagr/w
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
16misconnectivity
255noContact
 .1.2.826.0.1.1578918.5.3.25.1.2.1.9
bfdSessControlPlanIndepFlag
This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD implementation is
independent of the co…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.2.826.0.1.1578918.5.3.25.1.2.1.13
bfdSessIntface
This object contains an interface index used to indicate
the interface which this BFD session is running on. This
value can be zero if there is no interface associated
with this BFD session.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.2.826.0.1.1578918.5.3.25.1.2.1.14
bfdSessAddrType
This object specifies the type of the IP address of the
peer associated with this BFD session.

Only values unknown(0), ipv4(1) or ipv6(2)
have to be supported.

A value of unknown(0) is allo…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.2.826.0.1.1578918.5.3.25.1.2.1.15
bfdSessAddr
This object specifies the IP address of the peer
associated with this BFD session.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
 .1.2.826.0.1.1578918.5.3.25.1.2.1.16
bfdSessApplicationSessions
This object specifies the number of application sessions for this
BFD session.

An application session is a request made by a local application
for this BFD session. If multiple requests from one or more …
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.27
bfdSessLocalAddrType
This object specifies the type of the local IP address
associated with this BFD session.

Only values unknown(0), ipv4(1) or ipv6(2) have to be
supported.

A value of unknown(0) is allowed on…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.2.826.0.1.1578918.5.3.25.1.2.1.28
bfdSessLocalAddr
This object specifies the local IP address associated with
this BFD session.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.2.826.0.1.1578918.5.3.25.1.2.1.29
bfdSessDesiredMinTxIntvl
This object specifies the value in use on this BFD session
for the minimum interval, in microseconds, that the local
system would like to use when transmitting BFD Control
packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.30
bfdSessReqMinRxInterval
This object specifies the value in use on this BFD session
for the minimum interval, in microseconds, between
received BFD Control packets that the local system is
willing to accept.

A value of zero means…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.31
bfdSessDetectMult
This object specifies the value being sent by the local
system on this BFD session for the desired Detect time
multiplier.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.32
bfdSessInPkts
This object specifies the number of incoming BFD packets for
this BFD session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.33
bfdSessOutPkts
This object specifies the number of outgoing BFD packets for
this BFD session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.34
bfdSessDroppedPkts
This object specifies the number of dropped BFD packets for
this BFD session in receive direction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.2.1.35
bfdSessLastUpTime
This object specifies the sysUpTime for the last session up time.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.2.826.0.1.1578918.5.3.25.1.2.1.36
bfdSessLastUpTimeStamp
This object specifies the sysUpTime for the last session up
absolute time.
OctetString .1.2.826.0.1.1578918.5.3.25.1.2.1.37
bfdSessLastDownTime
This object specifies the sysUpTime for the last session down time.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.2.826.0.1.1578918.5.3.25.1.2.1.38
bfdSessLastDownTimeStamp
This object specifies the sysUpTime for the last session down
absolute time.
OctetString .1.2.826.0.1.1578918.5.3.25.1.2.1.39
bfdSessLastDownDiag
This object specifies the reason code for the last session down event.
BfdDiag
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
16misconnectivity
255noContact
 .1.2.826.0.1.1578918.5.3.25.1.2.1.40
bfdSessHistoryUpTime
This object specifies the sysUpTime for the last session up time.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.2.826.0.1.1578918.5.3.25.1.2.1.41
bfdSessHistoryUpTimeStamp
This object specifies the sysUpTime for the last session up
absolutetime.
OctetString .1.2.826.0.1.1578918.5.3.25.1.2.1.42
bfdSessHistoryDownTime
This object specifies the sysUpTime for the last session down time.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.2.826.0.1.1578918.5.3.25.1.2.1.43
bfdSessHistoryDownTimeStamp
This object specifies the sysUpTime for the last session absolute
down time.
OctetString .1.2.826.0.1.1578918.5.3.25.1.2.1.44
bfdSessHistoryDownDiag
This object specifies the reason code for the last session down event.
BfdDiag
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
16misconnectivity
255noContact
 .1.2.826.0.1.1578918.5.3.25.1.2.1.45
bfdSessUpTime
This object specifies the sysUpTime for the current session.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.2.826.0.1.1578918.5.3.25.1.2.1.46

dcBfdSessConfigTable

table
.1.2.826.0.1.1578918.5.3.25.1.6 · 1 row entry · 19 columns
Open in standard view
Uses the versa variant from /opt/observium/mibs/versa.
Command help
Walk dcBfdSessConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-BFD-STUB-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-BFD-STUB-MIB::dcBfdSessConfigTable' 
The BFD Session parameter configuration table allows static
configuration of BFD session parameters.
          
If a BFD session already exists when this row is created or
updated, then the session parameters in use will not be
affected by default.  To use the new session parameters, set the
dcBfdSessCfgResetAll field to 'true'.
          
The protocol MIB index is deprecated and should be set to
zero.
          
The interface index and peer address MIB indices can be used
as wildcards by specifying a value of zero.  This means that
multiple MIB rows could apply to a single BFD session.  In
this case, the best match will be used (that is, the match
with the fewest wildcards).
dcBfdSessConfigEntry row .1.2.826.0.1.1578918.5.3.25.1.6.1
BFD Session parameter configuration which applies to
BFD sessions matching the identification information.
Indexes
Column Syntax OID
dcBfdSessConfigProtocol
This field is deprecated and should be set to zero.

The collection of control plane protocol types that this
session parameter configuration applies to.
Bits
Enumerated Values:
0ospf
1isis
2bgp
3rip
4pim
5rsvp
6ldp
7lmp
8static
 .1.2.826.0.1.1578918.5.3.25.1.6.1.2
dcBfdSessConfigIfIndex
This object specifies the interface index of the
interface that this configuration applies to. If
the configuration should apply to all interfaces,
this object has the value zero.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.2.826.0.1.1578918.5.3.25.1.6.1.3
dcBfdSessConfigAddrType
The type of the address of the peer associated with this
BFD session parameter configuration.

This object specifies how the value of the
dcBfdSessConfigAddr object should be interpreted.

A …
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.2.826.0.1.1578918.5.3.25.1.6.1.4
dcBfdSessConfigAddr
The address of the peer associated with this BFD session
parameter configuration.

This field is only valid if dcBfdSessConfigAddrType is
non-zero. Otherwise, it should be set to a zero-length
address.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
 .1.2.826.0.1.1578918.5.3.25.1.6.1.5
dcBfdSessConfigRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.2.826.0.1.1578918.5.3.25.1.6.1.6
dcBfdSessConfigDemandModeDsrd
This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not.

This field is not supported by…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.2.826.0.1.1578918.5.3.25.1.6.1.7
dcBfdSessConfigEchoFuncModeDsrd
This object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(2) if not.

This field is not supported by the…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.2.826.0.1.1578918.5.3.25.1.6.1.8
dcBfdSessConfigDesiredMinTxIntvl
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets.
BfdIntervalr/w
Type Constraints:
range: 1..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.6.1.9
dcBfdSessConfigReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets that the
local system is willing to accept.
BfdIntervalr/w
Type Constraints:
range: 1..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.6.1.10
dcBfdSessConfigReqMinEchoRxIntvl
This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that
the local system is willing to accept.

This field is not supported by the reference BFD stub and
so has …
BfdIntervalr/w
Type Constraints:
range: 1..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.6.1.11
dcBfdSessConfigDetectMult
This object specifies the Detect time multiplier.
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.2.826.0.1.1578918.5.3.25.1.6.1.12
dcBfdSessConfigLocalAddrType
The type of the local IP address associated with this BFD
session.

This object specifies how the value of the
dcBfdSessConfigLocalAddr object should be interpreted.

Only values unknown(0), …
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.2.826.0.1.1578918.5.3.25.1.6.1.13
dcBfdSessConfigLocalAddr
This object specifies the local IP address associated with
this BFD session.

This field is only valid if dcBfdSessConfigLocalAddrType
is non-zero. Otherwise, it should be set to a zero-length
address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.2.826.0.1.1578918.5.3.25.1.6.1.14
dcBfdSessConfigAddrPrefixLen
The address prefix length in bits.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.2.826.0.1.1578918.5.3.25.1.6.1.15
dcBfdSessConfigResetAll
Trigger to reset all sessions that match this row,
restarting the sessions using the up-to-date parameters
from this row. Any changes to this row will only take
effect on active sessions when this trigger is set.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.2.826.0.1.1578918.5.3.25.1.6.1.16
dcBfdSessConfigExtIntvlEnabled
This object indicates whether the extended intervals
fields are enabled or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.2.826.0.1.1578918.5.3.25.1.6.1.17
dcBfdSessConfigExtDesiredMinTxIntvl
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets when the extended
interval is enabled.
BfdIntervalr/w
Type Constraints:
range: 1..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.6.1.18
dcBfdSessConfigExtReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets that the
local system is willing to accept when the extended interval
is enabled.
BfdIntervalr/w
Type Constraints:
range: 1..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.6.1.19
dcBfdSessConfigExtDetectMult
This object specifies the Detect time multiplier to be used
when the extended interval is enabled.
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.2.826.0.1.1578918.5.3.25.1.6.1.20

bfdMjTable

table
.1.2.826.0.1.1578918.5.3.25.1.7 · 1 row entry · 8 columns
Open in standard view
Uses the versa variant from /opt/observium/mibs/versa.
Command help
Walk bfdMjTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-BFD-STUB-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-BFD-STUB-MIB::bfdMjTable' 
This table controls which entities the DC-BFD component
should join to as master.  Each join is represented by a row
in this table.  The status of each join is represented by a
read-only object within each row.
          
Joins must be programmed in order to support specific
DC-BFD function.
          
- A single join with an interface ID of ifAtgSck is required
  if DC-BFD is to use the Sockets stub to signal BFD packets.
bfdMjEntry row .1.2.826.0.1.1578918.5.3.25.1.7.1
Represents a join for which DC-BFD acts as join master.
Indexes
Column Syntax OID
bfdMjInterfaceId
Identifies the interface required of this master join.
BfdMjIfId
Type Values:
226492416ifAtgPri
696516608ifAtgSck
1518403584ifAtgBfdo
 .1.2.826.0.1.1578918.5.3.25.1.7.1.2
bfdMjPartnerType
Identifies the type of entity to join to. This field must
be set to 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.7.1.3
bfdMjPartnerIndex
The entity index of the partner to join to.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.7.1.4
bfdMjSubIndex
This index field is currently unused and MUST be set to zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.7.1.5
bfdMjRowStatus
The row status for this DC-BFD component Master Join Table
entry, used to create and destroy table entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.2.826.0.1.1578918.5.3.25.1.7.1.6
bfdMjAdminStatus
The administrative status of this master join, used
to start and stop the join.
DC-MASTER-TCAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.2.826.0.1.1578918.5.3.25.1.7.1.7
bfdMjOperStatus
The current operational status of this master join.
DC-MASTER-TCOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.2.826.0.1.1578918.5.3.25.1.7.1.8
bfdMjJoinStatus
The status of the master join.
DC-MASTER-TCMjStatus
Type Values:
1mjNotJoined
2mjSentAddJoin
3mjSentRegister
4mjJoinActive
5mjSentUnregister
6mjSentDelJoin
7mjFailedToAdd
8mjFailedToRegister
9mjFailingOver
10mjFailed
11mjUnavailable
 .1.2.826.0.1.1578918.5.3.25.1.7.1.9

bfdSessStateTable

table
.1.2.826.0.1.1578918.5.3.25.1.8 · 1 row entry · 22 columns
Open in standard view
Uses the versa variant from /opt/observium/mibs/versa.
Command help
Walk bfdSessStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-BFD-STUB-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-BFD-STUB-MIB::bfdSessStateTable' 
The BFD Session state table allows the user to query BFD
protocol session state.
bfdSessStateEntry row .1.2.826.0.1.1578918.5.3.25.1.8.1
The BFD Session State Table shows the state and
dignostics of the BFD sessions created.
Indexes
Column Syntax OID
bfdSessStateIfIndex
The configured interface index of the interface that reaches
the peer associated with this BFD protocol session, or zero if
no interface index was configured.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.2.826.0.1.1578918.5.3.25.1.8.1.2
bfdSessStatePeerAddrType
The type of the configured address of the peer associated with
this BFD protocl session.

This object specifies how the value of the
bfdSessStatePeerAddr object should be interpreted.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.2.826.0.1.1578918.5.3.25.1.8.1.3
bfdSessStatePeerAddr
The configured address of the peer associated with this BFD
protocol session.

This field is only valid if bfdSessStatePeerAddrType is
non-zero. Otherwise, it should be set to a zero-length
address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.2.826.0.1.1578918.5.3.25.1.8.1.4
bfdSessStateLocalAddrType
The type of the configured local IP address associated with
this BFD protocol session.

This object specifies how the value of the
bfdSessStateLocalAddr object should be interpreted.

Only va…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.2.826.0.1.1578918.5.3.25.1.8.1.5
bfdSessStateLocalAddr
This object specifies the configured local IP address
associated with this BFD protocol session.

This field is only valid if bfdSessStateLocalAddrType is
non-zero. Otherwise, it should be set to a zero-l…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.2.826.0.1.1578918.5.3.25.1.8.1.6
bfdSessStateRemoteDiscr
The session discriminator specified for this BFD session.
Unsigned32
Constraints:
range: 0-4294967295
 .1.2.826.0.1.1578918.5.3.25.1.8.1.7
bfdSessStateState
The perceived state of the BFD protocol session.
BfdState
Type Values:
1adminDown
2down
3init
4up
 .1.2.826.0.1.1578918.5.3.25.1.8.1.8
bfdSessStateDiag
A diagnostic code specifying the local system's reason for
the last transition of the BFD protocol session from up(1)
to some other state.
BfdDiag
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
16misconnectivity
255noContact
 .1.2.826.0.1.1578918.5.3.25.1.8.1.9
bfdSessStateOperIfIndex
The interface index of the interface that reaches the peer
associated with this BFD protocol session. If the peer is
not directly connected, then this object has the value
zero.

If no interface index was…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.2.826.0.1.1578918.5.3.25.1.8.1.10
bfdSessStateOperPeerAddrType
The type of the address of the peer associated with this
BFD protocl session.

This object specifies how the value of the
bfdSessStateOperPeerAddr object should be interpreted.

If no peer ad…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.2.826.0.1.1578918.5.3.25.1.8.1.11
bfdSessStateOperPeerAddr
The address of the peer associated with this BFD protocol
session.

This field is only valid if bfdSessStateOperPeerAddrType
is non-zero. Otherwise, it should be ignored.

If no peer address…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.2.826.0.1.1578918.5.3.25.1.8.1.12
bfdSessStateOperLocalAddrType
The type of the configured local IP address associated
with this BFD protocol session.

This object specifies how the value of the
bfdSessStateOperLocalAddr object should be interpreted.

Onl…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.2.826.0.1.1578918.5.3.25.1.8.1.13
bfdSessStateOperLocalAddr
This object specifies the configured local IP address
associated with this BFD protocol session.

This field is only valid if bfdSessStateOperLocalAddrType
is non-zero. Otherwise, it should be set to a ze…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.2.826.0.1.1578918.5.3.25.1.8.1.14
bfdSessStateOperRemoteDiscr
The session discriminator chosen by the remote system for
this BFD session.

If no remote discriminator was configured for the session,
then this shows the remote discriminator that is actually
being used …
Unsigned32
Constraints:
range: 0-4294967295
 .1.2.826.0.1.1578918.5.3.25.1.8.1.15
bfdSessStateLocalDiscr
The local session discriminator for this BFD session.
Unsigned32
Constraints:
range: 0-4294967295
 .1.2.826.0.1.1578918.5.3.25.1.8.1.16
bfdSessStateTxIntvl
The negotiated transmit interval used as the packet
transmission interval by the local system on this BFD
session, in microseconds.
BfdIntervalWithZero
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.8.1.17
bfdSessStateRxInterval
The negotiated receive interval in use on this session, in
microseconds. That is, it is the rate at which the local
system expects to receive packets from the peer.

This value multiplied by bfdSessStateD…
BfdIntervalWithZero
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.8.1.18
bfdSessStateRemoteDetectMult
The value of the Detect time multiplier received from the
remote system on this BFD session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.2.826.0.1.1578918.5.3.25.1.8.1.19
bfdSessStateNumControlTx
The total number of BFD CC (Continuity Check) control
packets transmitted for this session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.2.826.0.1.1578918.5.3.25.1.8.1.20
bfdSessStateNumControlRx
The total number of BFD CC (Continuity Check) control
packets received for this session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.2.826.0.1.1578918.5.3.25.1.8.1.21
bfdSessStateNumCVControlTx
The total number of BFD CV (Connection Verification)
control packets transmitted for this session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.2.826.0.1.1578918.5.3.25.1.8.1.22
bfdSessStateNumCVControlRx
The total number of BFD CV (Connection Verification)
control packets received for this session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.2.826.0.1.1578918.5.3.25.1.8.1.23