DASAN-NOTIFICATION-V1

Imported Objects

dsPonCount, dsPonState, dsPonDirection, dsPonPortIndex, dsPonQueueIndex, dsPonTaggedLabel, dsPonOnuMacAddress, dsPonOnuIndex, dsPonOltIndexDASAN-GEPON-MIB
dasanEventsDASAN-SMI
dsUserMacAddress4, dsPortPortIndex, dsPortModuleIndex, dsSystemUpgradeStorage, dsSystemUpgradePath, dsFreeMem, dsUserMacAddress3, dsUserMacAddress2, dsUserMacAddress1, dsSwitchAtVID, dsSwitchAtNetAddress, dsSwitchAtMacAddress, dsPortInstallStatus, dsPowerIndex, dsTemperatureStatus, dsSubnetConfName, dsFanstatus, dsFanIndex, dsPowerstatusDASAN-SWITCH-MIB
dsUserLoginIpAddress, dsUserLoginNameDASAN-USER-MANAGEMENT-MIB
ifIndexIF-MIB
sysDescr, sysUpTimeSNMPv2-MIB
enterprises, OBJECT-IDENTITY, MODULE-IDENTITYSNMPv2-SMI

Objects

Notifications/Traps

NameOIDDescription
portInstalledTrap.1.3.6.1.4.1.6296.0.0.1
portInstalled trap send when portInstallStatus is enabled.
fanRemovedTrap.1.3.6.1.4.1.6296.0.0.10
Fan removed trap when fan was removed.
clockModuleInstalled.1.3.6.1.4.1.6296.0.0.105
clockModuleInstalled trap send when sleClockModuleInstallStatus is installed.
clockModuleRemoved.1.3.6.1.4.1.6296.0.0.106
clockModuleRemoved trap send when sleClockModuleInstallStatus is removed.
clockModuleInitOk.1.3.6.1.4.1.6296.0.0.107
clockModuleInitOk trap send when sleClockModuleInitStatus is ok.
clockModuleInitFail.1.3.6.1.4.1.6296.0.0.108
clockModuleInitFail trap send when sleClockModuleInitStatus is failure.
interfaceAdminUp.1.3.6.1.4.1.6296.0.0.109
This trap indicates the interface admin up.
bcastOverTrap.1.3.6.1.4.1.6296.0.0.11
Broadcast packet over trap when Rx broadcast packet is over the given limit.
interfaceAdminDown.1.3.6.1.4.1.6296.0.0.110
This trap indicates the interface admin down.
powerMonEventDetected.1.3.6.1.4.1.6296.0.0.111
This trap indicates the power monitoring detects voltage change of slot.
ntpConnectionFail.1.3.6.1.4.1.6296.0.0.112
This trap indicates the ntp connection is lost.
fanSpeedFallUnderThreshold.1.3.6.1.4.1.6296.0.0.113
This trap indicates the fan speed is under the threshold.
fanSpeedRisingOverThreshold.1.3.6.1.4.1.6296.0.0.114
This trap indicates the fan speed is over the threshold.
userLoginFail.1.3.6.1.4.1.6296.0.0.115
This trap indicates the user fail to login.
bfdSessionStateChanged.1.3.6.1.4.1.6296.0.0.116
This trap indicates that BFD session state is changed.
clockModuleOPModeChanged.1.3.6.1.4.1.6296.0.0.117
This trap indicate that slot Operation mode is changed.
clockModuleRefrencesChanged.1.3.6.1.4.1.6296.0.0.118
This trap indicate that slot reference ntr is changed.
cpuLoadOverThresholdTrap.1.3.6.1.4.1.6296.0.0.12
The cpuLoadoverThreshold trap is sentwhen cpuLoad is over the given limit.
portRxOverThreshold.1.3.6.1.4.1.6296.0.0.121
Port Rx traffic over HighThreshold trap when port traffic is over the given limit.
portRxFallThreshold.1.3.6.1.4.1.6296.0.0.122
Port Rx traffic fall under HighThreshold trap when port traffic falls below the given limit.
portTxOverThreshold.1.3.6.1.4.1.6296.0.0.123
Port Tx traffic over HighThreshold trap when port traffic is over the given limit.
portTxFallThreshold.1.3.6.1.4.1.6296.0.0.124
Port Tx traffic fall under HighThreshold trap when port traffic falls below the given limit.
clockModuleInSrcStatusChanged.1.3.6.1.4.1.6296.0.0.125
This trap indicate that BFD reference ntr is changed.
clockModuleInSrcAISStatusChanged.1.3.6.1.4.1.6296.0.0.126
This trap indicate that BFD reference ntr is changed.
clockModuleInSrcLoSStatusChanged.1.3.6.1.4.1.6296.0.0.127
This trap indicate that BFD reference ntr is changed.
clockModuleInSrcLDSCStatus.1.3.6.1.4.1.6296.0.0.128
This trap indicate that BFD reference ntr is changed.
clockModuleInSrcNtrClockchanged.1.3.6.1.4.1.6296.0.0.129
This trap indicate that BFD reference ntr is changed.
cpuLoadFallThresholdTrap.1.3.6.1.4.1.6296.0.0.13
The cpuLoadfallThreshold trap is sent when cpuLoad fall under the given limit.
dhcpLeaseShortageTrap.1.3.6.1.4.1.6296.0.0.14
DHCP User IP pool shortage when User's DHCPDISCOVER message arrive.
portOverThresholdTrap.1.3.6.1.4.1.6296.0.0.15
Port traffic over HighThreshold trap when port traffic is over the given limit.
ponLinkFault.1.3.6.1.4.1.6296.0.0.151
ONU reports a Link Fault via the flag in the 802.3ah OAM header.No further information about the fault is available..
ponLos.1.3.6.1.4.1.6296.0.0.152
Loss of Signal is detected by the PHY device for OLT Network  interface, and PON interfaces on  the OLT and ONU.
ponTransmitFail.1.3.6.1.4.1.6296.0.0.153
Transmitted output does not match input, as reported by EPON optics
ponTransmitDegrade.1.3.6.1.4.1.6296.0.0.154
Transmitted output has a high error level, but not so high as to cause - Failure. Optionallyreported by EPON optical module..
ponQueueOverflow.1.3.6.1.4.1.6296.0.0.155
One of the queues for the link has dropped frames due to becoming full
ponMacLearningTableOverflow.1.3.6.1.4.1.6296.0.0.156
MAC address learning table is full, not in overwrite mode, and a new MAC address wasencountered
ponDuplicateMacRegistration.1.3.6.1.4.1.6296.0.0.157
MPCP register request received for MAC that is registered and in-service
ponReportTimeout.1.3.6.1.4.1.6296.0.0.158
ONU does not respond to grants from the OLT
ponGateTimeout.1.3.6.1.4.1.6296.0.0.159
Excessive interval between MPCP gates.
portFallThresholdTrap.1.3.6.1.4.1.6296.0.0.16
Port traffic fall under HighThreshold trap when port traffic fall under the given limit.
ponOAMKeepaliveTimeout.1.3.6.1.4.1.6296.0.0.160
OAM KeepaliveTimeout - OAM layer does not receive periodic messages from its peer
ponKeyExchangeFailure.1.3.6.1.4.1.6296.0.0.161
The link peer has failed to generate a new key message, or to switch to the new key, in the timeallotted by the key exchange timer for this link. Encryption remains in force using the old key, and the key exchange process continues.The alarm will clear when a new key is established.
ponAutoNegotiation.1.3.6.1.4.1.6296.0.0.162
OLT Network port fails to auto-negotiate with the peer (if auto-negotiation feature is enabled).
ponLinkLoopback.1.3.6.1.4.1.6296.0.0.163
The link is currently in the loopback state
ponStandardDyingGasp.1.3.6.1.4.1.6296.0.0.164
ONU reports Dying Gasp via that bit in 802.3ah OAM header
ponPowerFail.1.3.6.1.4.1.6296.0.0.165
Power supply failure
ponTemperature.1.3.6.1.4.1.6296.0.0.166
Operating temperature range exceeded
ponAuthenticationInformationUnavailable.1.3.6.1.4.1.6296.0.0.167
ONU is configured to use external authentication device, and that device is not present
temperatureOverThresholdTrap.1.3.6.1.4.1.6296.0.0.17
TemperatureOverThreshold Trap is sent when temperature is over the certain threshold.
ponOctetsTransferred.1.3.6.1.4.1.6296.0.0.171
Octets Transferred
ponTotalFramesTransferred.1.3.6.1.4.1.6296.0.0.172
Total frames transferred
ponUnicastFramesTransferred.1.3.6.1.4.1.6296.0.0.173
Unicast frames transferred
ponBroadcastFramesTransferred.1.3.6.1.4.1.6296.0.0.174
Broadcast frames transferred
ponMulticastFramesTransferred.1.3.6.1.4.1.6296.0.0.175
Multicast frames transferred
ponCRC32Errors.1.3.6.1.4.1.6296.0.0.176
CRC-32 Errors
ponUndersizeFrames.1.3.6.1.4.1.6296.0.0.177
Undersize Frames
ponOversizeFrames.1.3.6.1.4.1.6296.0.0.178
Oversize Frames
ponCollisions.1.3.6.1.4.1.6296.0.0.179
Collisions
systemRestartTrap.1.3.6.1.4.1.6296.0.0.18
SystemRestart Trap is sent when system is restarted by user.
pon64OctetFrames.1.3.6.1.4.1.6296.0.0.180
64 Octet Frames
pon127OctetFrames.1.3.6.1.4.1.6296.0.0.181
65-127 Octet Frames
pon255OctetFrames.1.3.6.1.4.1.6296.0.0.182
128-255 Octet Frames
pon511OctetFrames.1.3.6.1.4.1.6296.0.0.183
256-511 Octet Frames
pon1023OctetFrames.1.3.6.1.4.1.6296.0.0.184
512-1023 Octet Frames
pon1518OctetFrames.1.3.6.1.4.1.6296.0.0.185
1024-1518 Octet Frames
pon1519OverOctetFrames.1.3.6.1.4.1.6296.0.0.186
1519+ Octet Frames
ponFramesDropped.1.3.6.1.4.1.6296.0.0.187
Frames dropped
ponOctetsDropped.1.3.6.1.4.1.6296.0.0.188
Octets dropped
ponOctetsDelayed.1.3.6.1.4.1.6296.0.0.189
Octets delayed
mfgdBlockedTrap.1.3.6.1.4.1.6296.0.0.19
mfgdblocked Trap is sent when a certain mac address is denied by mac-flood-guard mechanism.
ponOctetsGranted.1.3.6.1.4.1.6296.0.0.190
Octets granted
ponOctetsGrantedButUnused.1.3.6.1.4.1.6296.0.0.191
Octets granted but unused
ponMaximumDelay.1.3.6.1.4.1.6296.0.0.192
Maximum Delay (units of 100usec)
ponCRC8Errors.1.3.6.1.4.1.6296.0.0.193
CRC-8 (preamble) Errors
ponLineCodeErrors.1.3.6.1.4.1.6296.0.0.194
Line code errors
ponPauseFrames.1.3.6.1.4.1.6296.0.0.195
Pause Frames
ponErroredFrameSeconds.1.3.6.1.4.1.6296.0.0.196
Errored Frame Seconds
ponErroredFramePeriod.1.3.6.1.4.1.6296.0.0.197
Errored Frame Period
ponErroredFrameSecondsSummary.1.3.6.1.4.1.6296.0.0.198
Errored Frame Seconds Summary
portRemovedTrap.1.3.6.1.4.1.6296.0.0.2
portInstalled trap send when portInstallStatus is disabled.
mfgdReleasedTrap.1.3.6.1.4.1.6296.0.0.20
mfgdblocked Trap is sent when a certain mac address is permitted again by mac-flood-guard mechanism.
gponOnuRegistered.1.3.6.1.4.1.6296.0.0.200
Registered Onu Information
gponOnuDeregistered.1.3.6.1.4.1.6296.0.0.201
Deregistered Onu Information
swWatchdogDetectError.1.3.6.1.4.1.6296.0.0.202
S/W Watchdog Detect Error
swWatchdogClearError.1.3.6.1.4.1.6296.0.0.203
S/W Watchdog Clear Error
swWatchdogNormalState.1.3.6.1.4.1.6296.0.0.204
S/W Watchdog Normal State
swWatchdogAbnormalState.1.3.6.1.4.1.6296.0.0.205
S/W Watchdog Abnormal State
gponOnuUpgradeCompleted.1.3.6.1.4.1.6296.0.0.206
Upgrade Completed Onu Informations
gponOltCableDown.1.3.6.1.4.1.6296.0.0.207
GPON Cable down event is detected
gponOnuAutoToManual.1.3.6.1.4.1.6296.0.0.208
GPON Onu is auto-to-manual
slotActionEvent.1.3.6.1.4.1.6296.0.0.209
This trap indicates the slot action event
ipConflictTrap.1.3.6.1.4.1.6296.0.0.21
ipConflict Trap is sent when a certain IP address is shared among different users.
slotStateChanged.1.3.6.1.4.1.6296.0.0.210
This trap indicates the slot state is changed
gponNoAuthONU.1.3.6.1.4.1.6296.0.0.211
No authenticated ONU
gponDuplicateONU.1.3.6.1.4.1.6296.0.0.212
Duplicated ONU
gponDyingGasp.1.3.6.1.4.1.6296.0.0.213
Dying Gasp of GPON ONU
gponRogueOnu.1.3.6.1.4.1.6296.0.0.214
Found Rogue ONU.
gponOnuBatteryEvent.1.3.6.1.4.1.6296.0.0.215
Battery Event.
gponOnuBatteryEventCleared.1.3.6.1.4.1.6296.0.0.216
Battery Event is cleared.
gponOnuPortOperStatus.1.3.6.1.4.1.6296.0.0.217
This trap indicates state of ONU Port Operation.
gponTransceiverChanged.1.3.6.1.4.1.6296.0.0.218
This trap indicates GPON transceiver changed.
gponOltLosOn.1.3.6.1.4.1.6296.0.0.219
This trap indicates state of OLT Log Of Signal (on).
dhcpIllegalEntryTrap.1.3.6.1.4.1.6296.0.0.22
dhcpIllegalEntry trap is sent when illegal dhcp user is found.
gponOltLosOff.1.3.6.1.4.1.6296.0.0.220
This trap indicates state of OLT Log Of Signal (off).
gponOltLosiOn.1.3.6.1.4.1.6296.0.0.221
This trap indicates state of OLT Log Of Signal for ONUi (on).
gponOltLosiOff.1.3.6.1.4.1.6296.0.0.222
This trap indicates state of OLT Log Of Signal for ONUi (off).
gponDyingGaspOn.1.3.6.1.4.1.6296.0.0.223
This trap indicates Dying Gasp of GPON ONU (on).
gponDyingGaspOff.1.3.6.1.4.1.6296.0.0.224
This trap indicates Dying Gasp of GPON ONU (off).
slotErrorLEDChanged.1.3.6.1.4.1.6296.0.0.225
This trap indicates slot error LED changed.
nmsConnectionTypeChanged.1.3.6.1.4.1.6296.0.0.226
This trap indicates NMS connection type changed.
gponOntOSUpgradeStatus.1.3.6.1.4.1.6296.0.0.227
This trap indicates ONT OS upgrade status changes.
gponOntBLUpgradeStatus.1.3.6.1.4.1.6296.0.0.228
This trap indicates ONT BL upgrade status changes.
gponOntRxPowerLoss.1.3.6.1.4.1.6296.0.0.229
This trap indicates ONT port failed to detect Rx Power.
optionModuleInstalledTrap.1.3.6.1.4.1.6296.0.0.23
optionModuleInstalled Trap is sent when option Module was installed.
gponOntRxPowerDetected.1.3.6.1.4.1.6296.0.0.230
This trap indicates ONT port detected Rx Power.
gponOnuTemperatureHighOverThreshold.1.3.6.1.4.1.6296.0.0.231
This trap indicates the temperature of ONU is over high threshold.
gponOnuTemperatureHighFallThreshold.1.3.6.1.4.1.6296.0.0.232
This trap indicates the temperature of ONU falls under high threshold.
gponOnuTemperatureLowOverThreshold.1.3.6.1.4.1.6296.0.0.233
This trap indicates the temperature of ONU is over low threshold.
gponOnuTemperatureLowFallThreshold.1.3.6.1.4.1.6296.0.0.234
This trap indicates the temperature of ONU falls under low threshold.
gponOnuCpuOverThreshold.1.3.6.1.4.1.6296.0.0.235
This trap indicates the CPU-load of ONU is over threshold.
gponOnuCpuFallThreshold.1.3.6.1.4.1.6296.0.0.236
This trap indicates the CPU-load of ONU falls under threshold.
gponOnuMemoryOverThreshold.1.3.6.1.4.1.6296.0.0.237
This trap indicates the memory-utilization of ONU is over threshold.
gponOnuMemoryFallThreshold.1.3.6.1.4.1.6296.0.0.238
This trap indicates the memory-utilization of ONU falls under threshold.
gponOnuI2cFail.1.3.6.1.4.1.6296.0.0.239
This trap indicates that detect ONU's i2c fail.
optionModuleRemovedTrap.1.3.6.1.4.1.6296.0.0.24
optionModuleRemoved Trap is sent when option Module was removed.
gponOnuRxOpticPowerLowThreshAlarmOn.1.3.6.1.4.1.6296.0.0.240
This trap indicates that ONU's low threshold Rx Optic power Alarm is On.
gponOnuRxOpticPowerLowThreshAlarmOff.1.3.6.1.4.1.6296.0.0.241
This trap indicates that ONU's low threshold Rx Optic power Alarm is Off.
gponOnuRxOpticPowerHighThreshAlarmOn.1.3.6.1.4.1.6296.0.0.242
This trap indicates that ONU's high threshold Rx Optic power Alarm is On.
gponOnuRxOpticPowerHighThreshAlarmOff.1.3.6.1.4.1.6296.0.0.243
This trap indicates that ONU's high threshold Rx Optic power Alarm is Off.
gponOltLOFIOn.1.3.6.1.4.1.6296.0.0.244
Description
gponOltLOFIOff.1.3.6.1.4.1.6296.0.0.245
Description
gponOltDOWOn.1.3.6.1.4.1.6296.0.0.246
Description
gponOltDOWOff.1.3.6.1.4.1.6296.0.0.247
Description
gponOltSFOn.1.3.6.1.4.1.6296.0.0.248
Description
gponOltSFOff.1.3.6.1.4.1.6296.0.0.249
Description
memoryOverThresholdTrap.1.3.6.1.4.1.6296.0.0.25
Memory over HighThreshold trap when used memory size is over the given limit.
gponOltSDOn.1.3.6.1.4.1.6296.0.0.250
Description
gponOltSDOff.1.3.6.1.4.1.6296.0.0.251
Description
gponOltLCDGIOn.1.3.6.1.4.1.6296.0.0.252
Description
gponOltLCDGIOff.1.3.6.1.4.1.6296.0.0.253
Description
gponOltRDOn.1.3.6.1.4.1.6296.0.0.254
Description
gponOltRDOff.1.3.6.1.4.1.6296.0.0.255
Description
gponOltSUFOn.1.3.6.1.4.1.6296.0.0.256
Description
gponOltSUFOff.1.3.6.1.4.1.6296.0.0.257
Description
gponOltLOAOn.1.3.6.1.4.1.6296.0.0.258
Description
gponOltLOAOff.1.3.6.1.4.1.6296.0.0.259
Description
memoryFallThresholdTrap.1.3.6.1.4.1.6296.0.0.26
Memory fall under HighThreshold trap when used memory size fall under the given limit.
gponOltLOAMIOn.1.3.6.1.4.1.6296.0.0.260
Description
gponOltLOAMIOff.1.3.6.1.4.1.6296.0.0.261
Description
gponOltMEMOn.1.3.6.1.4.1.6296.0.0.262
Description
gponOltMEMOff.1.3.6.1.4.1.6296.0.0.263
Description
gponOltPEEOn.1.3.6.1.4.1.6296.0.0.264
Description
gponOltPEEOff.1.3.6.1.4.1.6296.0.0.265
Description
gponOltPSTOn.1.3.6.1.4.1.6296.0.0.266
Description
gponOltPSTOff.1.3.6.1.4.1.6296.0.0.267
Description
gponOltERROn.1.3.6.1.4.1.6296.0.0.268
Description
gponOltERROff.1.3.6.1.4.1.6296.0.0.269
Description
slotInstalledTrap.1.3.6.1.4.1.6296.0.0.27
slotInstalledTrap Trap is sent when Board was installed.
gponOltREIOn.1.3.6.1.4.1.6296.0.0.270
Description
gponOltREIOff.1.3.6.1.4.1.6296.0.0.271
Description
slotRemovedTrap.1.3.6.1.4.1.6296.0.0.28
slotRemovedTrap Trap is sent when Board was removed.
slotStateChangeTrap.1.3.6.1.4.1.6296.0.0.29
slotStateChangeTrap Trap is sent when Board State change.
powerOkTrap.1.3.6.1.4.1.6296.0.0.3
Power status OK trap when powerStatus change from disable to enable.
portCRCOverThreshold.1.3.6.1.4.1.6296.0.0.30
CRC Load over HighThreshold trap when crcLoad is over the given limit.
portCRCFallThreshold.1.3.6.1.4.1.6296.0.0.31
CRC Load fall under HighThreshold trap when crcLoad fall under the given limit.
temperatureHighOverThreshold.1.3.6.1.4.1.6296.0.0.32
The temperatureHighOverThreshold Trap is sent when temperature is over the high-threshold.
temperatureHighFallThreshold.1.3.6.1.4.1.6296.0.0.33
The temperatureHighFallThreshold Trap is sent when temperature fall the high-threshold.
temperatureLowOverThreshold.1.3.6.1.4.1.6296.0.0.34
The temperatureLowOverThreshold Trap is sent when 1st temperature is over the low-threshold.
temperatureLowFallThreshold.1.3.6.1.4.1.6296.0.0.35
The temperatureLowFallThreshold Trap is sent when temperature fall under the low-threshold.
userLogIn.1.3.6.1.4.1.6296.0.0.36
The user-login trap is sent when user login.
userLogOut.1.3.6.1.4.1.6296.0.0.37
The user-logout trap is sent when user logout.
restoreFactory.1.3.6.1.4.1.6296.0.0.38
The restoreFactory trap is sent when user initialize as factory defaults.
cpuLoadHighOverThreshold.1.3.6.1.4.1.6296.0.0.39
The cpuloadHighOverThreshold Trap is sent when cpuload is over the high-threshold.
powerFailTrap.1.3.6.1.4.1.6296.0.0.4
Power status fail trap when powerStatus change from enable to disable.
cpuLoadHighFallThreshold.1.3.6.1.4.1.6296.0.0.40
The cpuloadHighFallThreshold Trap is sent when cpuload fall the high-threshold.
cpuLoadLowOverThreshold.1.3.6.1.4.1.6296.0.0.41
The cpuloadLowOverThreshold Trap is sent when 1st cpuload is over the low-threshold.
cpuLoadLowFallThreshold.1.3.6.1.4.1.6296.0.0.42
The cpuloadLowFallThreshold Trap is sent when cpuload fall under the low-threshold.
igmpSnoopingChanged.1.3.6.1.4.1.6296.0.0.43
dsSystemUpgradeChanged.1.3.6.1.4.1.6296.0.0.44
System NOS Upgrade status
fanOkTrap.1.3.6.1.4.1.6296.0.0.5
Fan status OK trap when fanStatus change from disable to enable.
adslAtucPerfLofsThreshTrap.1.3.6.1.4.1.6296.0.0.51
Loss of Framing threshold reached(ATUC)
adslAtucPerfLossThreshTrap.1.3.6.1.4.1.6296.0.0.52
Loss of signal threshold reached(ATUC)
adslAtucPerfLprsThreshTrap.1.3.6.1.4.1.6296.0.0.53
Loss of power threshold reached (ATUC)
adslAtucPerfESsThreshTrap.1.3.6.1.4.1.6296.0.0.54
Errored Seconds threshold reached (ATUC)
adslAtucRateChangeTrap.1.3.6.1.4.1.6296.0.0.55
Changed atuc rate
adslAtucPerfLolsThreshTrap.1.3.6.1.4.1.6296.0.0.56
Loss of Link threshold reached (ATUC)
fanFailTrap.1.3.6.1.4.1.6296.0.0.6
Fan status fail trap when fanStatus change from enable to disable.
adslAturPerfLofsThreshTrap.1.3.6.1.4.1.6296.0.0.61
Loss of Framing threshold reached(ATUR)
adslAturPerfLossThreshTrap.1.3.6.1.4.1.6296.0.0.62
Loss of signal threshold reached(ATUR)
adslAturPerfLprsThreshTrap.1.3.6.1.4.1.6296.0.0.63
Loss of power threshold reached (ATUR)
adslAturPerfESsThreshTrap.1.3.6.1.4.1.6296.0.0.64
Errored Seconds threshold reached (ATUR)
vdslCPEChangeInfoTrap.1.3.6.1.4.1.6296.0.0.65
Trap is sent with CPE Serial No., Mac Address of CPE, after CPE serial change.
powerInstalledTrap.1.3.6.1.4.1.6296.0.0.7
Power Installed trap when power was installed.
cfgdBlocked.1.3.6.1.4.1.6296.0.0.71
Cfgdblocked Trap is sent when a certain port is blocked by cpu-flood-guard mechanism.
cfgdReleased.1.3.6.1.4.1.6296.0.0.72
CfgdReleased Trap is sent when a certain port is non-blocked by cpu-flood-guard mechanism.
cfgdOverThreshold.1.3.6.1.4.1.6296.0.0.73
CfgdOverThreshold Trap is sent when a certain port is over the threshold by cpu-flood-guard mechanism.
cfgdUnderThreshold.1.3.6.1.4.1.6296.0.0.74
CfgdUnderThreshold Trap is sent when a certain port fall under the threshold by cpu-flood-guard mechanism
sfgdBlocked.1.3.6.1.4.1.6296.0.0.75
Sfgdblocked Trap is sent when a certain port is blocked by system-flood-guard mechanism.
sfgdReleased.1.3.6.1.4.1.6296.0.0.76
SfgdReleased Trap is sent when a certain port is non-blocked by system-flood-guard mechanism.
sfgdOverThreshold.1.3.6.1.4.1.6296.0.0.77
SfgdOverThreshold Trap is sent when a certain port is over the threshold by system-flood-guard mechanism.
sfgdUnderThreshold.1.3.6.1.4.1.6296.0.0.78
SfgdUnderThreshold Trap is sent when a certain port fall under the threshold by system-flood-guard mechanism
ppsControlBlocked.1.3.6.1.4.1.6296.0.0.79
ppsControlBlocked Trap is sent when a certain port is blocked by PPS-Control mechanism.
powerRemovedTrap.1.3.6.1.4.1.6296.0.0.8
Power removed trap when power was removed.
ppsControlReleased.1.3.6.1.4.1.6296.0.0.80
ppsControlReleased Trap is sent when a certain port is non-blocked by PPS-Control mechanism.
ppsControlOverThreshold.1.3.6.1.4.1.6296.0.0.81
ppsControlOverThreshold Trap is sent when a certain port is over the threshold by PPS-Control mechanism.
ppsontrolUnderThreshold.1.3.6.1.4.1.6296.0.0.82
ppsControlUnderThreshold Trap is sent when a certain port fall under the threshold by PPS-Control mechanism
nosRemoteUpgradeRequest.1.3.6.1.4.1.6296.0.0.83
This trap indicates that the system received nos-remote-upgrade command.
nosRemoteUpgradeSuccess.1.3.6.1.4.1.6296.0.0.84
This trap indicates that the NOS succeeded to upgrade NOS.
nosRemoteUpgradeFailAbort.1.3.6.1.4.1.6296.0.0.85
This trap indicates that the system failed to download NOS by user interrup.
nosRemoteUpgradeFailHeaderError.1.3.6.1.4.1.6296.0.0.86
This trap indicates that the system failed to download NOS, for NOS header-error.
nosRemoteUpgradeFailDownloadError.1.3.6.1.4.1.6296.0.0.87
This trap indicates that the system failed to download NOS, for NOS checksum-error.
nosRemoteUpgradeFailFlashError.1.3.6.1.4.1.6296.0.0.88
This trap indicates that the system failed to download NOS, for flash operation.
nosRemoteUpgradeStart.1.3.6.1.4.1.6296.0.0.89
This trap indicates that the upgrade NOS process was started.
fanInstalledTrap.1.3.6.1.4.1.6296.0.0.9
Fan Installed trap when fan was installed.
systemDyingGasp.1.3.6.1.4.1.6296.0.0.90
This trap indicates that Dying-gasp for power fault.
attackGuardBlock.1.3.6.1.4.1.6296.0.0.91
This trap indicates that some port is blocked by attack-guard.
attackGuardUnBlock.1.3.6.1.4.1.6296.0.0.92
This trap indicates that some port is unblocked by attack-guard.
fanPeriodicFault.1.3.6.1.4.1.6296.0.0.93
This trap indicates the fan status is fault in some period.
remoteOamDyingGasp.1.3.6.1.4.1.6296.0.0.94
This trap indicates the remote oam entity is in dying-gasp.
remoteOamDyingGaspRestoration.1.3.6.1.4.1.6296.0.0.95
This trap indicates the remote oam entity is restored.
arpInspectInvalid.1.3.6.1.4.1.6296.0.0.96
This trap indicates the ARP inspection is invalided.
systemSwitchover.1.3.6.1.4.1.6296.0.0.97
This trap indicates the system is switchover.
boardChangeState.1.3.6.1.4.1.6296.0.0.98
This trap indicates the board state is changed.