portI0nstalled trap send when portInstallStatus is enabled.
fanRemoved
.1.3.6.1.4.1.6296.0.10
Fan removed trap when fan was removed.
clockModuleInstalled
.1.3.6.1.4.1.6296.0.105
clockModuleInstalled trap send when sleClockModuleInstallStatus is installed.
clockModuleRemoved
.1.3.6.1.4.1.6296.0.106
clockModuleRemoved trap send when sleClockModuleInstallStatus is removed.
clockModuleInitOk
.1.3.6.1.4.1.6296.0.107
clockModuleInitOk trap send when sleClockModuleInitStatus is ok.
clockModuleInitFail
.1.3.6.1.4.1.6296.0.108
clockModuleInitFail trap send when sleClockModuleInitStatus is failure.
interfaceAdminUp
.1.3.6.1.4.1.6296.0.109
This trap indicates the interface admin up.
bcastOver
.1.3.6.1.4.1.6296.0.11
Broadcast packet over trap when Rx broadcast packet is over the given limit.
interfaceAdminDown
.1.3.6.1.4.1.6296.0.110
This trap indicates the interface admin down.
powerMonEventDetected
.1.3.6.1.4.1.6296.0.111
This trap indicates the power monitoring detects voltage change of slot.
ntpConnectionFail
.1.3.6.1.4.1.6296.0.112
This trap indicates the ntp connection is lost.
fanSpeedFallUnderThreshold
.1.3.6.1.4.1.6296.0.113
This trap indicates the fan speed is under the threshold.
fanSpeedRisingOverThreshold
.1.3.6.1.4.1.6296.0.114
This trap indicates the fan speed is over the threshold.
userLoginFail
.1.3.6.1.4.1.6296.0.115
This trap indicates the user fail to login.
bfdSessionStateChanged
.1.3.6.1.4.1.6296.0.116
This trap indicates that BFD session state is changed.
clockModuleOPModeChanged
.1.3.6.1.4.1.6296.0.117
This trap indicate that slot Operation mode is changed.
clockModuleRefrencesChanged
.1.3.6.1.4.1.6296.0.118
This trap indicate that slot reference ntr is changed.
portOperUp
.1.3.6.1.4.1.6296.0.119
indicate that port operation
is up.
cpuLoadOverThreshold
.1.3.6.1.4.1.6296.0.12
The cpuLoadOverThreshold trap is sent when cpuLoad is over the given limit.
portOperDown
.1.3.6.1.4.1.6296.0.120
indicate that port operation
is down
portRxOverThreshold
.1.3.6.1.4.1.6296.0.121
Port Rx traffic over HighThreshold trap when port traffic is over the given limit.
portRxFallThreshold
.1.3.6.1.4.1.6296.0.122
Port Rx traffic fall under HighThreshold trap when port traffic falls below the given limit.
portTxOverThreshold
.1.3.6.1.4.1.6296.0.123
Port Tx traffic over HighThreshold trap when port traffic is over the given limit.
portTxFallThreshold
.1.3.6.1.4.1.6296.0.124
Port Tx traffic fall under HighThreshold trap when port traffic falls below the given limit.
clockModuleInSrcStatusChanged
.1.3.6.1.4.1.6296.0.125
This trap indicate that module status is changed.
clockModuleInSrcAISStatusChanged
.1.3.6.1.4.1.6296.0.126
This trap indicate that AIS status is changed.
clockModuleInSrcLoSStatusChaged
.1.3.6.1.4.1.6296.0.127
This trap indicate that LOS status is changed.
clockModuleInSrcLDSCStatus
.1.3.6.1.4.1.6296.0.128
This trap indicate that LDSC status is changed.
clockModuleInSrcNtrClockChanged
.1.3.6.1.4.1.6296.0.129
This trap indicate that NTR is changed.
cpuLoadFallThreshold
.1.3.6.1.4.1.6296.0.13
The cpuLoadfallThreshold trap is sent when cpuLoad fall under the given limit.
reloadMateSFU
.1.3.6.1.4.1.6296.0.130
This trap indicate that reload mate SFU.
processDown
.1.3.6.1.4.1.6296.0.131
This trap indicate that certain process is crashed and restarted.
processTimeout
.1.3.6.1.4.1.6296.0.132
This trap indicate that certain process is timeout.
sdcardInstalled
.1.3.6.1.4.1.6296.0.133
This trap indicate that SD card is installed.
sdcardRemoved
.1.3.6.1.4.1.6296.0.134
This trap indicate that SD card is removed.
dhcpLeaseShortage
.1.3.6.1.4.1.6296.0.14
DHCP User IP pool shortage when User's DHCPDISCOVER message arrive.
bootedNonDefaultOS
.1.3.6.1.4.1.6296.0.141
This trap indicate that the system started with non-default OS.
slotBootedNonDefaultOS
.1.3.6.1.4.1.6296.0.142
This trap indicate that the IU card started with non-default OS.
cpuPpsOverThreshold
.1.3.6.1.4.1.6296.0.145
The PPS of cpu is over the threshold.
cpuPpsUnderThreshold
.1.3.6.1.4.1.6296.0.146
The PPS of cpu is under the threshold.
portOverThreshold
.1.3.6.1.4.1.6296.0.15
Port traffic over HighThreshold trap when port traffic is over the given limit.
ponLinkFault
.1.3.6.1.4.1.6296.0.151
ONU reports a Link Fault via the flag in the 802.3ah OAM header.No further information about the fault is available..
ponLos
.1.3.6.1.4.1.6296.0.152
Loss of Signal is detected by the PHY device for OLT Network interface, and PON interfaces on the OLT and ONU.
ponTransmitFail
.1.3.6.1.4.1.6296.0.153
Transmitted output does not match input, as reported by EPON optics.
ponTransmitDegrade
.1.3.6.1.4.1.6296.0.154
Transmitted output has a high error level, but not so high as to cause - Failure. Optionallyreported by EPON optical module.
ponQueueOverflow
.1.3.6.1.4.1.6296.0.155
One of the queues for the link has dropped frames due to becoming full.
ponMacLearningTableOverflow
.1.3.6.1.4.1.6296.0.156
MAC address learning table is full, not in overwrite mode, and a new MAC address wasencountered.
ponDuplicateMacRegistration
.1.3.6.1.4.1.6296.0.157
MPCP register request received for MAC that is registered and in-service.
ponReportTimeout
.1.3.6.1.4.1.6296.0.158
ONU does not respond to grants from the OLT.
ponGateTimeout
.1.3.6.1.4.1.6296.0.159
Excessive interval between MPCP gates.
portFallThreshold
.1.3.6.1.4.1.6296.0.16
Port traffic fall under HighThreshold trap when port traffic falls below the given limit.
ponOAMKeepaliveTimeout
.1.3.6.1.4.1.6296.0.160
OAM KeepaliveTimeout - OAM layer does not receive periodic messages from its peer.
ponKeyExchangeFailure
.1.3.6.1.4.1.6296.0.161
The link peer has failed to generate a new key message, or to switch to the new key, in the timeallotted by the key exchange timer for this link. Encryption remains in force using the old key, and the key exchange process continues.The alarm will clear when a new key is established.
ponAutoNegotiation
.1.3.6.1.4.1.6296.0.162
OLT Network port fails to auto-negotiate with the peer (if auto-negotiation feature is enabled).
ponLinkLoopback
.1.3.6.1.4.1.6296.0.163
The link is currently in the loopback state.
ponStandardDyingGasp
.1.3.6.1.4.1.6296.0.164
ONU reports Dying Gasp via that bit in 802.3ah OAM header.
ponPowerFail
.1.3.6.1.4.1.6296.0.165
Power supply failure.
ponTemperature
.1.3.6.1.4.1.6296.0.166
Operating temperature range exceeded.
ponAuthenticationInformationUnavailable
.1.3.6.1.4.1.6296.0.167
ONU is configured to use external authentication device, and that device is not present.
temperatureOverThreshold
.1.3.6.1.4.1.6296.0.17
TemperatureOverThreshold Trap is sent when temperature is over the certain threshold.
ponOctetsTransferred
.1.3.6.1.4.1.6296.0.171
Octets Transferred.
ponTotalFramesTransferred
.1.3.6.1.4.1.6296.0.172
Total frames transferred.
ponUnicastFramesTransferred
.1.3.6.1.4.1.6296.0.173
Unicast frames transferred.
ponBroadcastFramesTransferred
.1.3.6.1.4.1.6296.0.174
Broadcast frames transferred.
ponMulticastFramesTransferred
.1.3.6.1.4.1.6296.0.175
Multicast frames transferred.
ponCRC32Errors
.1.3.6.1.4.1.6296.0.176
CRC-32 Errors.
ponUndersizeFrames
.1.3.6.1.4.1.6296.0.177
Undersize Frames.
ponOversizeFrames
.1.3.6.1.4.1.6296.0.178
Oversize Frames.
ponCollisions
.1.3.6.1.4.1.6296.0.179
Collisions.
systemRestart
.1.3.6.1.4.1.6296.0.18
art Trap is sent when system is restarted by
user. sleAutoResetBootReason is only used for auto-reset
pon64OctetFrames
.1.3.6.1.4.1.6296.0.180
64 Octet Frames.
pon127OctetFrames
.1.3.6.1.4.1.6296.0.181
65-127 Octet Frames.
pon255OctetFrames
.1.3.6.1.4.1.6296.0.182
128-255 Octet Frames.
pon511OctetFrames
.1.3.6.1.4.1.6296.0.183
256-511 Octet Frames.
pon1023OctetFrames
.1.3.6.1.4.1.6296.0.184
512-1023 Octet Frames.
pon1518OctetFrames
.1.3.6.1.4.1.6296.0.185
1024-1518 Octet Frames.
pon1519OverOctetFrames
.1.3.6.1.4.1.6296.0.186
1519+ Octet Frames.
ponFramesDropped
.1.3.6.1.4.1.6296.0.187
Frames dropped.
ponOctetsDropped
.1.3.6.1.4.1.6296.0.188
Octets dropped.
ponOctetsDelayed
.1.3.6.1.4.1.6296.0.189
Octets delayed.
mfgdBlocked
.1.3.6.1.4.1.6296.0.19
mfgdblocked Trap is sent when a certain mac address is denied by mac-flood-guard mechanism.
ponOctetsGranted
.1.3.6.1.4.1.6296.0.190
Octets granted.
ponOctetsGrantedButUnused
.1.3.6.1.4.1.6296.0.191
Octets granted but unused.
ponMaximumDelay
.1.3.6.1.4.1.6296.0.192
Maximum Delay (units of 100usec).
ponCRC8Errors
.1.3.6.1.4.1.6296.0.193
CRC-8 (preamble) Errors.
ponLineCodeErrors
.1.3.6.1.4.1.6296.0.194
Line code errors
ponPauseFrames
.1.3.6.1.4.1.6296.0.195
Pause Frames
ponErroredFrameSeconds
.1.3.6.1.4.1.6296.0.196
Errored Frame Seconds
ponErroredFramePeriod
.1.3.6.1.4.1.6296.0.197
Errored Frame Period
ponErroredFrameSecondsSummary
.1.3.6.1.4.1.6296.0.198
Errored Frame Seconds Summary
portRemoved
.1.3.6.1.4.1.6296.0.2
portInstalled trap send when portInstallStatus is disabled.
mfgdReleased
.1.3.6.1.4.1.6296.0.20
mfgdReleased Trap is sent when a certain mac address is permitted again by mac-flood-guard mechanism.
gponOnuRegistered
.1.3.6.1.4.1.6296.0.200
Registered Onu Informations
gponOnuDeregistered
.1.3.6.1.4.1.6296.0.201
Deregistered Onu Informations
swWatchdogDetectError
.1.3.6.1.4.1.6296.0.202
S/W Watchdog Detect Error
swWatchdogClearError
.1.3.6.1.4.1.6296.0.203
S/W Watchdog Clear Error
swWatchdogNormalState
.1.3.6.1.4.1.6296.0.204
S/W Watchdog Normal State
swWatchdogAbnomalState
.1.3.6.1.4.1.6296.0.205
S/W Watchdog Abnormal State
gponOnuUpgradeCompleted
.1.3.6.1.4.1.6296.0.206
Upgrade Completed Onu Informations
gponOltCableDown
.1.3.6.1.4.1.6296.0.207
down event is detected.(This is not used for
any product)
gponOnuAutoToManual
.1.3.6.1.4.1.6296.0.208
GPON Onu is auto-to-manual
slotActionEvent
.1.3.6.1.4.1.6296.0.209
This trap indicates the slot action event
ipConflict
.1.3.6.1.4.1.6296.0.21
ipConflict Trap is sent when a certain IP address is shared among different users.
slotStateChanged
.1.3.6.1.4.1.6296.0.210
This trap indicates the slot state is changed
gponNoAuthONU
.1.3.6.1.4.1.6296.0.211
No autheticated ONU
gponDuplicateONU
.1.3.6.1.4.1.6296.0.212
Duplicated ONU
gponDyingGasp
.1.3.6.1.4.1.6296.0.213
Dying Gasp of GPON ONU
gponRogueOnu
.1.3.6.1.4.1.6296.0.214
Found Rogue ONU.
gponOnuBatteryEvent
.1.3.6.1.4.1.6296.0.215
Battery Event.
gponOnuBatteryEventCleared
.1.3.6.1.4.1.6296.0.216
Battery Event is cleared.
gponOnuPortOperStatus
.1.3.6.1.4.1.6296.0.217
This trap indicates state of ONU Port Operation.
gponTransceiverChanged
.1.3.6.1.4.1.6296.0.218
This trap indicates GPON transceiver changed.
gponOltLosOn
.1.3.6.1.4.1.6296.0.219
This trap indicates state of OLT Loss Of Signal (on).
dhcpIllegalEntry
.1.3.6.1.4.1.6296.0.22
dhcpIllegalEntry trap is sent when illegal dhcp user is found.
gponOltLosOff
.1.3.6.1.4.1.6296.0.220
This trap indicates state of OLT Loss Of Signal (off).
gponOltLosiOn
.1.3.6.1.4.1.6296.0.221
This trap indicates state of OLT Loss Of Signal for ONUi (on).
gponOltLosiOff
.1.3.6.1.4.1.6296.0.222
This trap indicates state of OLT Loss Of Signal for ONUi (off).
gponDyingGaspOn
.1.3.6.1.4.1.6296.0.223
This trap indicates Dying Gasp of GPON ONU (on).
gponDyingGaspOff
.1.3.6.1.4.1.6296.0.224
This trap indicates Dying Gasp of GPON ONU (off).
slotErrorLEDChanged
.1.3.6.1.4.1.6296.0.225
This trap indicates slot error LED changed.
nmsConnectionTypeChanged
.1.3.6.1.4.1.6296.0.226
This trap indicates NMS connection type changed.
gponOntOSUpgradeStatus
.1.3.6.1.4.1.6296.0.227
This trap indicates ONT OS upgrade status changes.
gponOntBLUpgradeStatus
.1.3.6.1.4.1.6296.0.228
This trap indicates ONT BL upgrade status changes.
gponOntRxPowerLoss
.1.3.6.1.4.1.6296.0.229
This trap indicates ONT port failed to detect Rx Power.
optionModuleInstalled
.1.3.6.1.4.1.6296.0.23
optionModuleInstalled Trap is sent when option Module was installed.
gponOntRxPowerDetected
.1.3.6.1.4.1.6296.0.230
This trap indicates ONT port detected Rx Power.
gponOnuTemperatureHighOverThreshold
.1.3.6.1.4.1.6296.0.231
This trap indicates the temperature of ONU is over high threshold.
gponOnuTemperatureHighFallThreshold
.1.3.6.1.4.1.6296.0.232
This trap indicates the temperature of ONU falls under high threshold.
gponOnuTemperatureLowOverThreshold
.1.3.6.1.4.1.6296.0.233
This trap indicates the temperature of ONU is over low threshold.
gponOnuTemperatureLowFallThreshold
.1.3.6.1.4.1.6296.0.234
This trap indicates the temperature of ONU falls under low threshold.
gponOnuCpuOverThreshold
.1.3.6.1.4.1.6296.0.235
This trap indicates the CPU-load of ONU is over threshold.
gponOnuCpuFallThreshold
.1.3.6.1.4.1.6296.0.236
This trap indicates the CPU-load of ONU falls under threshold.
gponOnuMemoryOverThreshold
.1.3.6.1.4.1.6296.0.237
This trap indicates the memory-utilization of ONU is over threshold.
gponOnuMemoryFallThreshold
.1.3.6.1.4.1.6296.0.238
This trap indicates the memory-utilization of ONU falls under threshold.
gponOnuI2cFail
.1.3.6.1.4.1.6296.0.239
This trap indicates that detect ONU's i2c fail.
optionModuleRemoved
.1.3.6.1.4.1.6296.0.24
optionModuleRemoved Trap is sent when option Module was removed.
gponOnuRxOpticPowerLowThreshAlarmOn
.1.3.6.1.4.1.6296.0.240
RX optic low power alarm is detected
gponOnuRxOpticPowerLowThreshAlarmOff
.1.3.6.1.4.1.6296.0.241
RX optic low power alarm is cleared
gponOnuRxOpticPowerHighThreshAlarmOn
.1.3.6.1.4.1.6296.0.242
RX Optic over power alarm is detected
gponOnuRxOpticPowerHighThreshAlarmOff
.1.3.6.1.4.1.6296.0.243
RX Optic over power alarm is cleared.
gponOltLOFIOn
.1.3.6.1.4.1.6296.0.244
OLT LOFI alarm is detected
gponOltLOFIOff
.1.3.6.1.4.1.6296.0.245
OLT LOFI alarm is cleared
gponOltDOWOn
.1.3.6.1.4.1.6296.0.246
OLT DOW alarm is detected
gponOltDOWOff
.1.3.6.1.4.1.6296.0.247
OLT DOW alarm is cleared
gponOltSFOn
.1.3.6.1.4.1.6296.0.248
OLT SF alarm is detected
gponOltSFOff
.1.3.6.1.4.1.6296.0.249
OLT SF alarm is cleared
memoryOverThreshold
.1.3.6.1.4.1.6296.0.25
Threshold trap is sent when used memory size is over the given limit
and free memory size falls below the given limit.
gponOltSDOn
.1.3.6.1.4.1.6296.0.250
OLT SD alarm is detected
gponOltSDOff
.1.3.6.1.4.1.6296.0.251
OLT SD alarm is cleared
gponOltLCDGIOn
.1.3.6.1.4.1.6296.0.252
OLT LCDGI alarm is detected
gponOltLCDGIOff
.1.3.6.1.4.1.6296.0.253
OLT LCDGI alarm is cleared
gponOltRDOn
.1.3.6.1.4.1.6296.0.254
OLT RD alarm is detected
gponOltRDOff
.1.3.6.1.4.1.6296.0.255
OLT RD alarm is cleared
gponOltSUFOn
.1.3.6.1.4.1.6296.0.256
OLT SUF alarm is detected
gponOltSUFOff
.1.3.6.1.4.1.6296.0.257
OLT SUF alarm is cleared
gponOltLOAOn
.1.3.6.1.4.1.6296.0.258
OLT LOA alarm is detected
gponOltLOAOff
.1.3.6.1.4.1.6296.0.259
OLT LOA alarm is cleared
memoryFallThreshold
.1.3.6.1.4.1.6296.0.26
MemoryFallThreshold trap is sent when free memory size is over the given limit.
gponOltLOAMIOn
.1.3.6.1.4.1.6296.0.260
OLT LOAMI alarm is detected
gponOltLOAMIOff
.1.3.6.1.4.1.6296.0.261
OLT LOAMI alarm is cleared
gponOltMEMOn
.1.3.6.1.4.1.6296.0.262
OLT MEM alarm is detected
gponOltMEMOff
.1.3.6.1.4.1.6296.0.263
OLT MEM alarm is cleared
gponOltPEEOn
.1.3.6.1.4.1.6296.0.264
OLT PEE alarm is detected
gponOltPEEOff
.1.3.6.1.4.1.6296.0.265
OLT PEE alarm is cleared
gponOltPSTOn
.1.3.6.1.4.1.6296.0.266
OLT PST alarm is detected
gponOltPSTOff
.1.3.6.1.4.1.6296.0.267
OLT PST alarm is cleared
gponOltERROn
.1.3.6.1.4.1.6296.0.268
OLT alarm error is detected
gponOltERROff
.1.3.6.1.4.1.6296.0.269
OLT alarm error is cleared
slotInstalled
.1.3.6.1.4.1.6296.0.27
slotInstalledTrap Trap is sent when Board was installed.
gponOltREIOn
.1.3.6.1.4.1.6296.0.270
OLT REI alarm is detected
gponOltREIOff
.1.3.6.1.4.1.6296.0.271
OLT REI alarm is cleared.
gponAntiSpoofingDupPortOn
.1.3.6.1.4.1.6296.0.272
Anti spoofing duplication port alarm is detected
gponAntiSpoofingDupPortOff
.1.3.6.1.4.1.6296.0.273
Anti spoofing duplication port alarm is cleared
gponRedundancySwitchOver
.1.3.6.1.4.1.6296.0.274
Redundancy switch over
gponDuplicatedRangingResponse
.1.3.6.1.4.1.6296.0.275
Duplicated ranging response detection.
gponOnuPortOpticModuleInstall
.1.3.6.1.4.1.6296.0.276
ONU port optic module install detection.
gponOnuPortOpticModuleRemove
.1.3.6.1.4.1.6296.0.277
ONU port optic module removal detection.
gponOnuOMCCProblemDetected
.1.3.6.1.4.1.6296.0.278
ONU OMCC Problem is detected.
gponOnuOMCCProblemCleared
.1.3.6.1.4.1.6296.0.279
ONU OMCC Problem is cleared.
slotRemoved
.1.3.6.1.4.1.6296.0.28
slotRemovedTrap Trap is sent when Board was removed.
gponOltFixedTcontAlarmOn
.1.3.6.1.4.1.6296.0.280
OLT fixed tcont alarm is detected
gponOltFixedTcontAlarmOff
.1.3.6.1.4.1.6296.0.281
OLT fixed tcont alarm is cleared
gponOltDynamicTcontAlarmOn
.1.3.6.1.4.1.6296.0.282
OLT dynamic tcont alarm is detected.
gponOltDynamicTcontAlarmOff
.1.3.6.1.4.1.6296.0.283
OLT dynamic tcont alarm is cleared.
gponOltPortCountAlarmOn
.1.3.6.1.4.1.6296.0.284
OLT port count alarm is detected.
gponOltPortCountAlarmOff
.1.3.6.1.4.1.6296.0.285
OLT port count alarm is cleared.
gponOltCableDownAlarmOn
.1.3.6.1.4.1.6296.0.286
GPON Cable down event is detected
gponOltCableDownAlarmOff
.1.3.6.1.4.1.6296.0.287
GPON Cable down event is cleared
gponOltDeactiveMonitorAlarmOn
.1.3.6.1.4.1.6296.0.288
GPON deactive monitor alarm is on
gponOltDeactiveMonitorAlarmOff
.1.3.6.1.4.1.6296.0.289
GPON deactive monitor alarm is off
slotStateChange
.1.3.6.1.4.1.6296.0.29
slotStateChangeTrap Trap is sent when Board State change.
gponOltDFION
.1.3.6.1.4.1.6296.0.290
GPON OLT DFI is on
gponOltDFIOFF
.1.3.6.1.4.1.6296.0.291
GPON OLT DFI is off
gponOltTransceiverPortChanged
.1.3.6.1.4.1.6296.0.294
GPON OLT Transceiver alarm is changed
gponOltRxOpticPowerHighThresOver
.1.3.6.1.4.1.6296.0.295
GPON OLT power high threshold is over
gponOltRxOpticPowerHighThresOverCleared
.1.3.6.1.4.1.6296.0.296
GPON OLT power high threshold over is cleared
gponOltRxOpticPowerLowThresUnder
.1.3.6.1.4.1.6296.0.297
GPON OLT power low threshold is under
gponOltRxOpticPowerLowThresUnderCleared
.1.3.6.1.4.1.6296.0.298
GPON OLT power low threshold under is cleared
powerOk
.1.3.6.1.4.1.6296.0.3
Power status OK trap when powerStatus change from disable to enable.
portCRCOverThreshold
.1.3.6.1.4.1.6296.0.30
rThreshold Trap is sent when the CRC count of
port over threshold.
oamRapsEastPortStatusChanged
.1.3.6.1.4.1.6296.0.301
The east port status changed
oamRapsWestPortStatusChanged
.1.3.6.1.4.1.6296.0.302
The west port status changed
oamURNodePortStatusChanged
.1.3.6.1.4.1.6296.0.303
OAM uplink redundancy node's port status changed
portCRCFallThreshold
.1.3.6.1.4.1.6296.0.31
rThreshold Trap is sent when the CRC count of
port fall threshold.
temperatureHighOverThreshold
.1.3.6.1.4.1.6296.0.32
The temperatureHighOverThreshold Trap is sent when temperature is over the high-threshold.
loopDetectBlocked
.1.3.6.1.4.1.6296.0.320
This trap indicate the Port is blocked by loop-detect.
loopDetectUnBlockedbyExpireTimer
.1.3.6.1.4.1.6296.0.321
This trap indicate the Port is unblocked by loop-detect's expire timer.
loopDetectUnBlockedbyLinkDown
.1.3.6.1.4.1.6296.0.322
This trap indicate the Port is unblocked by loop-detect's link down.
temperatureHighFallThreshold
.1.3.6.1.4.1.6296.0.33
The temperatureHighFallThreshold Trap is sent when temperature fall the high-threshold.
temperatureLowOverThreshold
.1.3.6.1.4.1.6296.0.34
The temperatureLowOverThreshold Trap is sent when 1st temperature is over the low-threshold.
writeMemoryFailSeveralTimes
.1.3.6.1.4.1.6296.0.341
This trap indicates the writing memory is failed 3 times
writeMemoryFailSeveralTimesCleared
.1.3.6.1.4.1.6296.0.342
This trap indicates the writing memory is ok
temperatureLowFallThreshold
.1.3.6.1.4.1.6296.0.35
The temperatureLowFallThreshold Trap is sent when temperature fall under the low-threshold.
emLogDefectCPUHighOver
.1.3.6.1.4.1.6296.0.351
EM log about CPU load high over.
emLogDefectCPUHighUnder
.1.3.6.1.4.1.6296.0.352
EM log about CPU load high under.
emLogTemperHighOver
.1.3.6.1.4.1.6296.0.353
EM log about temperature high over.
emLogTemperHighUnder
.1.3.6.1.4.1.6296.0.354
EM log about temperature high under.
emLogTemperLowUnder
.1.3.6.1.4.1.6296.0.355
EM log about temperature low under (occured).
emLogTemperLowOver
.1.3.6.1.4.1.6296.0.356
EM log about temperature low under (cleared).
emLogMemLowOver
.1.3.6.1.4.1.6296.0.357
EM log about memory low over (cleared).
emLogMemLowUnder
.1.3.6.1.4.1.6296.0.358
EM log about memory low over (occured).
emLogFanFail
.1.3.6.1.4.1.6296.0.359
EM log about fan fail.
userLogIn
.1.3.6.1.4.1.6296.0.36
The user-login trap is sent when user login.
emLogFanFailCleared
.1.3.6.1.4.1.6296.0.360
EM log about fan fail cleared.
emLogPhyCRCFail
.1.3.6.1.4.1.6296.0.361
EM log about PHY CRC fail.
emLogPhyCRCFailCleared
.1.3.6.1.4.1.6296.0.362
EM log about PHY CRC fail cleared.
emLogPhyDetectFail
.1.3.6.1.4.1.6296.0.363
EM log about PHY detect fail.
emLogPhyDetectFailCleared
.1.3.6.1.4.1.6296.0.364
EM log about PHY detect fail cleared.
emLogSFUMateInitFail
.1.3.6.1.4.1.6296.0.365
EM log about SFU mate init fail
emLogSFUMateInitFailCleared
.1.3.6.1.4.1.6296.0.366
EM log about SFU mate init fail cleared
emLogDaemonHealthBad
.1.3.6.1.4.1.6296.0.367
EM log about daemon health bad
emLogDaemonHealthBadCleared
.1.3.6.1.4.1.6296.0.368
EM log about daemon health bad cleared
emLogGPIURavenLinkDown
.1.3.6.1.4.1.6296.0.369
EM log about GPIU raven link down
userLogOut
.1.3.6.1.4.1.6296.0.37
The user-logout trap is sent when user logout.
emLogGPIURavenLinkDownCleared
.1.3.6.1.4.1.6296.0.370
EM log about GPIU raven link down cleared
bootSequenceConfigFile
.1.3.6.1.4.1.6296.0.371
Boot Sequence Config File failed
topologyChanged
.1.3.6.1.4.1.6296.0.372
Topolgy changed
configLoadFail
.1.3.6.1.4.1.6296.0.373
Config load failed
emlogFanRPMLow
.1.3.6.1.4.1.6296.0.375
FAN RPM Low detected in EMLOG
emlogFanRPMLowCleared
.1.3.6.1.4.1.6296.0.376
FAN RPM Low cleared in EMLOG
emlogNAKError
.1.3.6.1.4.1.6296.0.377
NAK Error detected in EMLOG
emlogNAKErrorCleared
.1.3.6.1.4.1.6296.0.378
NAK Error cleared in EMLOG
restoreFactory
.1.3.6.1.4.1.6296.0.38
The restoreFactory trap is sent when user initialize as factory defaults.
gponOnuAniVoltageLowThreshAlarmOn
.1.3.6.1.4.1.6296.0.381
Voltage low threshold alarm on
gponOnuAniVoltageLowThreshAlarmOff
.1.3.6.1.4.1.6296.0.382
Voltage low threshold alarm off
gponOnuAniVoltageHighThreshAlarmOn
.1.3.6.1.4.1.6296.0.383
Voltage high threshold alarm on
gponOnuAniVoltageHighThreshAlarmOff
.1.3.6.1.4.1.6296.0.384
Voltage high threshold alarm off
gponOnuAniTemperatureLowThreshAlarmOn
.1.3.6.1.4.1.6296.0.385
Temperature low threshold alarm on
gponOnuAniTemperatureLowThreshAlarmOff
.1.3.6.1.4.1.6296.0.386
Temperature high threshold alarm off
gponOnuAniTemperatureHighThreshAlarmOn
.1.3.6.1.4.1.6296.0.387
Temperature high threshold alarm on
gponOnuAniTemperatureHighThreshAlarmOff
.1.3.6.1.4.1.6296.0.388
Temperature high threshold alarm off
gponOnuAniTxBiasLowThreshAlarmOn
.1.3.6.1.4.1.6296.0.389
TX-bias low threshold alarm on
cpuLoadHighOverThreshold
.1.3.6.1.4.1.6296.0.39
The cpuloadHighOverThreshold Trap is sent when temperature is over the high-threshold.
gponOnuAniTxBiasLowThreshAlarmOff
.1.3.6.1.4.1.6296.0.390
TX-bias low threshold alarm off
gponOnuAniTxBiasHighThreshAlarmOn
.1.3.6.1.4.1.6296.0.391
TX-bias high threshold alarm on
gponOnuAniTxBiasHighThreshAlarmOff
.1.3.6.1.4.1.6296.0.392
TX-bias high threshold alarm off
gponOnuAniTxpowerLowThreshAlarmOn
.1.3.6.1.4.1.6296.0.393
TX-power low threshold alarm on
gponOnuAniTxpowerLowThreshAlarmOff
.1.3.6.1.4.1.6296.0.394
TX-power low threshold alarm off
gponOnuAniTxpowerHighThreshAlarmOn
.1.3.6.1.4.1.6296.0.395
TX-power high threshold alarm on
gponOnuAniTxpowerHighThreshAlarmOff
.1.3.6.1.4.1.6296.0.396
TX-power high threshold alarm off
slotHealthStatusTimeout
.1.3.6.1.4.1.6296.0.397
This trap indicates the slot health status time-out is occurred
slotHealthStatusTimeoutCleared
.1.3.6.1.4.1.6296.0.398
This trap indicates the slot health status time-out trap is cleared
powerFail
.1.3.6.1.4.1.6296.0.4
Power status fail trap when powerStatus change from enable to disable.
cpuLoadHighFallThreshold
.1.3.6.1.4.1.6296.0.40
The cpuloadHighFallThreshold Trap is sent when temperature fall the high-threshold.
sfpDMIDiagTemperOverHighAlarm
.1.3.6.1.4.1.6296.0.401
This trap indicates the temperature of sfp is over the high threshold.(Alarm)
sfpDMIDiagTemperUnderHighAlarm
.1.3.6.1.4.1.6296.0.402
This trap indicates the temperature of sfp is under the high threshold.(Alarm)
sfpDMIDiagTemperUnderLowAlarm
.1.3.6.1.4.1.6296.0.403
This trap indicates the temperature of sfp is under the low threshold.(Alarm)
sfpDMIDiagTemperOverLowAlarm
.1.3.6.1.4.1.6296.0.404
This trap indicates the temperature of sfp is over the low threshold.(Alarm)
sfpDMIDiagTemperOverHighWarn
.1.3.6.1.4.1.6296.0.405
This trap indicates the temperature of sfp is over the high threshold.(Warn)
sfpDMIDiagTemperUnderHighWarn
.1.3.6.1.4.1.6296.0.406
This trap indicates the temperature of sfp is under the high threshold.(Warn)
sfpDMIDiagTemperUnderLowWarn
.1.3.6.1.4.1.6296.0.407
This trap indicates the temperature of sfp is under the low threshold.(Warn)
sfpDMIDiagTemperOverLowWarn
.1.3.6.1.4.1.6296.0.408
This trap indicates the temperature of sfp is over the low threshold.(Warn)
sfpDMIDiagVoltageOverHighAlarm
.1.3.6.1.4.1.6296.0.409
This trap indicates the voltage of sfp is over the high threshold.(Alarm)
cpuLoadLowOverThreshold
.1.3.6.1.4.1.6296.0.41
The cpuloadLowOverThreshold Trap is sent when 1st temperature is over the low-threshold.
sfpDMIDiagVoltageUnderHighAlarm
.1.3.6.1.4.1.6296.0.410
This trap indicates the voltage of sfp is under the high threshold.(Alarm)
sfpDMIDiagVoltageUnderLowAlarm
.1.3.6.1.4.1.6296.0.411
This trap indicates the voltage of sfp is under the low threshold.(Alarm)
sfpDMIDiagVoltageOverLowAlarm
.1.3.6.1.4.1.6296.0.412
This trap indicates the voltage of sfp is over the low threshold.(Alarm)
sfpDMIDiagVoltageOverHighWarn
.1.3.6.1.4.1.6296.0.413
This trap indicates the voltage of sfp is over the high threshold.(Warn)
sfpDMIDiagVoltageUnderHighWarn
.1.3.6.1.4.1.6296.0.414
This trap indicates the voltage of sfp is under the high threshold.(Warn)
sfpDMIDiagVoltageUnderLowWarn
.1.3.6.1.4.1.6296.0.415
This trap indicates the voltage of sfp is under the low threshold.(Warn)
sfpDMIDiagVoltageOverLowWarn
.1.3.6.1.4.1.6296.0.416
This trap indicates the voltage of sfp is over the low threshold.(Warn)
sfpDMIDiagTxBiasOverHighAlarm
.1.3.6.1.4.1.6296.0.417
This trap indicates the TxBias of sfp is over the high threshold.(Alarm)
sfpDMIDiagTxBiasUnderHighAlarm
.1.3.6.1.4.1.6296.0.418
This trap indicates the TxBias of sfp is under the high threshold.(Alarm)
sfpDMIDiagTxBiasUnderLowAlarm
.1.3.6.1.4.1.6296.0.419
This trap indicates the TxBias of sfp is under the low threshold.(Alarm)
cpuLoadLowFallThreshold
.1.3.6.1.4.1.6296.0.42
The cpuloadLowFallThreshold Trap is sent when temperature fall under the low-threshold.
sfpDMIDiagTxBiasOverLowAlarm
.1.3.6.1.4.1.6296.0.420
This trap indicates the TxBias of sfp is over the low threshold.(Alarm)
sfpDMIDiagTxBiasOverHighWarn
.1.3.6.1.4.1.6296.0.421
This trap indicates the TxBias of sfp is over the high threshold.(Warn)
sfpDMIDiagTxBiasUnderHighWarn
.1.3.6.1.4.1.6296.0.422
This trap indicates the TxBias of sfp is under the high threshold.(Warn)
sfpDMIDiagTxBiasUnderLowWarn
.1.3.6.1.4.1.6296.0.423
This trap indicates the TxBias of sfp is under the low threshold.(Warn)
sfpDMIDiagTxBiasOverLowWarn
.1.3.6.1.4.1.6296.0.424
This trap indicates the TxBias of sfp is over the low threshold.(Warn)
sfpDMIDiagTxPowerOverHighAlarm
.1.3.6.1.4.1.6296.0.425
This trap indicates the TxPower of sfp is over the high threshold.(Alarm)
sfpDMIDiagTxPowerUnderHighAlarm
.1.3.6.1.4.1.6296.0.426
This trap indicates the TxPower of sfp is under the high threshold.(Alarm)
sfpDMIDiagTxPowerUnderLowAlarm
.1.3.6.1.4.1.6296.0.427
This trap indicates the TxPower of sfp is under the low threshold.(Alarm)
sfpDMIDiagTxPowerOverLowAlarm
.1.3.6.1.4.1.6296.0.428
This trap indicates the TxPower of sfp is over the low threshold.(Alarm)
sfpDMIDiagTxPowerOverHighWarn
.1.3.6.1.4.1.6296.0.429
This trap indicates the TxPower of sfp is over the high threshold.(Warn)
sfpDMIDiagTxPowerUnderHighWarn
.1.3.6.1.4.1.6296.0.430
This trap indicates the TxPower of sfp is under the high threshold.(Warn)
sfpDMIDiagTxPowerUnderLowWarn
.1.3.6.1.4.1.6296.0.431
This trap indicates the TxPower of sfp is under the low threshold.(Warn)
sfpDMIDiagTxPowerOverLowWarn
.1.3.6.1.4.1.6296.0.432
This trap indicates the TxPower of sfp is over the low threshold.(Warn)
sfpDMIDiagRxPowerOverHighAlarm
.1.3.6.1.4.1.6296.0.433
This trap indicates the RxPower of sfp is over the high threshold.(Alarm)
sfpDMIDiagRxPowerUnderHighAlarm
.1.3.6.1.4.1.6296.0.434
This trap indicates the RxPower of sfp is under the high threshold.(Alarm)
sfpDMIDiagRxPowerUnderLowAlarm
.1.3.6.1.4.1.6296.0.435
This trap indicates the RxPower of sfp is under the low threshold.(Alarm)
sfpDMIDiagRxPowerOverLowAlarm
.1.3.6.1.4.1.6296.0.436
This trap indicates the RxPower of sfp is over the low threshold.(Alarm)
sfpDMIDiagRxPowerOverHighWarn
.1.3.6.1.4.1.6296.0.437
This trap indicates the RxPower of sfp is over the high threshold.(Warn)
sfpDMIDiagRxPowerUnderHighWarn
.1.3.6.1.4.1.6296.0.438
This trap indicates the RxPower of sfp is under the high threshold.(Warn)
sfpDMIDiagRxPowerUnderLowWarn
.1.3.6.1.4.1.6296.0.439
This trap indicates the RxPower of sfp is under the low threshold.(Warn)
dsSystemUpgradeChanged
.1.3.6.1.4.1.6296.0.44
System NOS Upgrade status
sfpDMIDiagRxPowerOverLowWarn
.1.3.6.1.4.1.6296.0.440
This trap indicates the RxPower of sfp is over the low threshold.(Warn)
gponOnuOnuServiceOpModeAlarm
.1.3.6.1.4.1.6296.0.441
GPON ONU service operational mode alarm.
gponOnuOnuServiceOpModeAlarmOff
.1.3.6.1.4.1.6296.0.442
GPON ONU service operational mode cleared alarm.
slotTemperPowerCutOff
.1.3.6.1.4.1.6296.0.445
This trap indicates the slot temperature power cut off
slotTemperPowerCutOffCleared
.1.3.6.1.4.1.6296.0.446
This trap indicates the slot temperature power cut off is cleared
interfaceOperDown
.1.3.6.1.4.1.6296.0.45
This trap indicates the interface oper down.
interfaceOperUp
.1.3.6.1.4.1.6296.0.46
This trap indicates the interface poer up.
gponOnuAuthErrorReasonUpdated
.1.3.6.1.4.1.6296.0.461
This trap indicates GPON ONU authentication error reason is updated
macLearnOverMax
.1.3.6.1.4.1.6296.0.47
This trap indicates the count of L2 mac is over the max.
macLearnOverMaxCleared
.1.3.6.1.4.1.6296.0.48
This trap indicates the count of L2 mac is over the max is cleared
interfaceMacLearnOverMax
.1.3.6.1.4.1.6296.0.49
This trap indicates the count of interface's L2 mac is over the max.
fanOk
.1.3.6.1.4.1.6296.0.5
Fan status OK trap when fanStatus change from disable to enable.
interfaceMacLearnOverMaxCleared
.1.3.6.1.4.1.6296.0.50
This trap indicates the count of interface's L2 mac is over the max is cleared
ponRegErr
.1.3.6.1.4.1.6296.0.501
This trap indicates the pon registration is not ok
ponBadEncryptionKey
.1.3.6.1.4.1.6296.0.502
This trap indicates the pon encryption key is bad
ponLloidMismatch
.1.3.6.1.4.1.6296.0.503
This trap indicates the pon LLOID is mismatched
ponTooManyOnu
.1.3.6.1.4.1.6296.0.504
This trap indicates the pon has too many of ONU
ponDyingGasp
.1.3.6.1.4.1.6296.0.505
This trap indicates the pon dying GASP
ponRegister
.1.3.6.1.4.1.6296.0.506
This trap indicates the pon is registered
ponDeregister
.1.3.6.1.4.1.6296.0.507
This trap indicates the pon is deregistered
ponLastOnuDeregister
.1.3.6.1.4.1.6296.0.508
This trap indicates the last ONU is deregistered
ponCableDown
.1.3.6.1.4.1.6296.0.509
This trap indicates the pon cable is down
adslAtucPerfLofsThresh
.1.3.6.1.4.1.6296.0.51
Loss of Framing threshold reached(ATUC).
ponCableDownRecover
.1.3.6.1.4.1.6296.0.510
This trap indicates the pon cable down is recovered
ponFirstRegistration
.1.3.6.1.4.1.6296.0.511
This trap indicates the first pon registration
ponOntLinkUp
.1.3.6.1.4.1.6296.0.512
This trap indicates the ont link up
ponOltOnuDown
.1.3.6.1.4.1.6296.0.513
This trap indicates the Onu down
ponHealthCheckErr
.1.3.6.1.4.1.6296.0.514
This trap indicates the pon health check error
ponRegisterModeChange
.1.3.6.1.4.1.6296.0.515
This trap indicates the pon register mode is changed
ponOpticSignalErr
.1.3.6.1.4.1.6296.0.516
This trap indicates the pon optic signal error
ponOpticSignalErrRecover
.1.3.6.1.4.1.6296.0.517
This trap indicates the pon optic signal error is recovered
ponOverVolSigErr
.1.3.6.1.4.1.6296.0.518
This trap indicates the pon over volatage signal error
ponOverVolSigErrRecover
.1.3.6.1.4.1.6296.0.519
This trap indicates the pon over volatage signal error is recovered
adslAtucPerfLossThresh
.1.3.6.1.4.1.6296.0.52
Loss of signal threshold reached(ATUC).
ponOnuRssiInfoErr
.1.3.6.1.4.1.6296.0.520
This trap indicates the Onu RSSI information error
ponOnuRssiInfoErrCleared
.1.3.6.1.4.1.6296.0.521
This trap indicates the Onu RSSI information error is cleard
ponOnuCrcUpAlarmErr
.1.3.6.1.4.1.6296.0.522
This trap indicates the ONU CRC up alarm error
ponOnuCrcUpAlarmErrCleared
.1.3.6.1.4.1.6296.0.523
This trap indicates the ONU CRC up alarm error is cleared
ponOnuCrcDownAlarmErr
.1.3.6.1.4.1.6296.0.524
This trap indicates the ONU CRC down alarm error
ponOnuCrcDownAlarmErrCleared
.1.3.6.1.4.1.6296.0.525
This trap indicates the ONU CRC down alarm error is cleared
ponOnuTooFrequentlyRegErr
.1.3.6.1.4.1.6296.0.526
This trap indicates the ONU is registered too frequently.
ponOnuTooFrequentlyRegErrCleared
.1.3.6.1.4.1.6296.0.527
This trap indicates the ONU registration frequently error is cleared.
ponOnuOpticPowerAlarmErr
.1.3.6.1.4.1.6296.0.528
This trap indicates the pon ONU optic power alarm error
ponOnuOpticPowerAlarmErrCleared
.1.3.6.1.4.1.6296.0.529
This trap indicates the pon ONU optic power alarm error is cleared
adslAtucPerfLprsThresh
.1.3.6.1.4.1.6296.0.53
Loss of power threshold reached (ATUC).
ponOnuDcVoltageAlarmErr
.1.3.6.1.4.1.6296.0.530
This trap indicates the pon ONU DC voltage alarm error
ponOnuDcVoltageAlarmErrCleared
.1.3.6.1.4.1.6296.0.531
This trap indicates the pon ONU DC voltage alarm error is cleared
ponOnuLoopingAlarmErr
.1.3.6.1.4.1.6296.0.532
This trap indicates the pon ONU looping alarm error
ponOnuLoopingAlarmErrCleared
.1.3.6.1.4.1.6296.0.533
This trap indicates the pon ONU looping alarm error is cleared
ponDetectRogueOnu
.1.3.6.1.4.1.6296.0.534
This trap indicates the Rogue ONU detection.
ponDetectRogueOnuCleared
.1.3.6.1.4.1.6296.0.535
This trap indicates the Rogue ONU detection is cleared.
ponDetectRogueOnuPowerOff
.1.3.6.1.4.1.6296.0.536
This trap indicates the Rogue ONU power off is detected.
ponDetectRogueOnuDeregisterSuccess
.1.3.6.1.4.1.6296.0.537
This trap indicates the Rogue ONU deregister success is detected
ponDectectRogueOnuFoundFailed
.1.3.6.1.4.1.6296.0.538
This trap indicates the Rogue ONU found fail is detected.
ponDectectRogueOnuTurn
.1.3.6.1.4.1.6296.0.539
This trap indicates the Rogue ONU turn is detected.
adslAtucPerfESsThresh
.1.3.6.1.4.1.6296.0.54
Errored Seconds threshold reached (ATUC).
ponOltStandbyRxpowerOverHigh
.1.3.6.1.4.1.6296.0.540
This trap indicates the Olt standby RX power is over high threshold
ponOltStandbyRxpowerUnderLow
.1.3.6.1.4.1.6296.0.541
This trap indicates the Olt standby RX power is under low threshold
ponOltRedundancyPortDown
.1.3.6.1.4.1.6296.0.542
This trap indicates the Olt redundancy port is down
ponOltRedundancyRxpower
.1.3.6.1.4.1.6296.0.543
This trap indicates the Olt redundancy RXpower
ponOnuBcastStormLlidUpErr
.1.3.6.1.4.1.6296.0.544
This trap indicates the broadcast storm llid up error
ponOnuBcastStormLlidUpErrCleared
.1.3.6.1.4.1.6296.0.545
This trap indicates the broadcast storm llid up error is cleared
ponOnuBcastStormLlidDownErr
.1.3.6.1.4.1.6296.0.546
This trap indicates the broadcast storm llid down error
ponOnuBcastStormLlidDownErrCleared
.1.3.6.1.4.1.6296.0.547
This trap indicates the broadcast storm llid down error is cleared
ponOnuBcastStormUniUpErr
.1.3.6.1.4.1.6296.0.548
This trap indicates the broadcast storm UNI up error
ponOnuBcastStormUniUpErrCleared
.1.3.6.1.4.1.6296.0.549
This trap indicates the broadcast storm Uni up error is cleared
adslAtucRateChange
.1.3.6.1.4.1.6296.0.55
Changed atuc rate.
ponOnuReset
.1.3.6.1.4.1.6296.0.550
This trap indicates Pon ONU reset
ponOnuLifLcErrAlarmErr
.1.3.6.1.4.1.6296.0.551
This trap indicates Pon ONU LIF Error
ponOnuLifLcErrAlarmErrCleared
.1.3.6.1.4.1.6296.0.552
This trap indicates Pon ONU LIF Error is cleared
adslAtucPerfLolsThresh
.1.3.6.1.4.1.6296.0.56
Loss of Link threshold reached (ATUC).
ponOltResetPonMac
.1.3.6.1.4.1.6296.0.561
This trap indicates Pon OLT MAC reset
ponOltRedSwitchover
.1.3.6.1.4.1.6296.0.581
This trap indicates the OLT redundancy switchover
ponOltRedGroupCreated
.1.3.6.1.4.1.6296.0.582
This trap indicates the OLT redundancy group is created
ponOltRedGroupDeleted
.1.3.6.1.4.1.6296.0.583
This trap indicates the OLT redundancy group is deleted
ponOltRedTriggerChanged
.1.3.6.1.4.1.6296.0.584
This trap indicates the OLT redundancy trigger is changed
ponOltRedDbResyncChanged
.1.3.6.1.4.1.6296.0.585
This trap indicates the OLT redundancy DB resync is changed
ponOltRedDbSyncChecked
.1.3.6.1.4.1.6296.0.586
This trap indicates the OLT redundancy DB sync is checked
fanFail
.1.3.6.1.4.1.6296.0.6
Fan status fail trap when fanStatus change from enable to disable.
ponOnuRssiWarn
.1.3.6.1.4.1.6296.0.601
This trap indicates the ONU RSSI warning
ponOnuRssiWarnCleared
.1.3.6.1.4.1.6296.0.602
This trap indicates the ONU RSSI warning is cleared
ponOnuRssiAlarm
.1.3.6.1.4.1.6296.0.603
This trap indicates the ONU RSSI alarm
ponOnuRssiAlarmCleared
.1.3.6.1.4.1.6296.0.604
This trap indicates the ONU RSSI alarm is cleared
ponOnuRxpowerWarn
.1.3.6.1.4.1.6296.0.605
This trap indicates the ONU RX-power warning
ponOnuRxpowerWarnCleared
.1.3.6.1.4.1.6296.0.606
This trap indicates the ONU RX-power warning is cleared
ponOnuRxpowerAlarm
.1.3.6.1.4.1.6296.0.607
This trap indicates the ONU RX-power alarm
ponOnuRxpowerAlarmCleared
.1.3.6.1.4.1.6296.0.608
This trap indicates the ONU RX-power alarm is cleared
ponMacTableOverFlow
.1.3.6.1.4.1.6296.0.609
This trap indicates the Mac table is over Max entry.
adslAturPerfLofsThresh
.1.3.6.1.4.1.6296.0.61
Loss of Framing threshold reached(ATUR).
ponMacTableOverFlowCleared
.1.3.6.1.4.1.6296.0.610
This trap indicates the Mac over max entry is cleared.
fiberLengthChangedWarningAlarm
.1.3.6.1.4.1.6296.0.611
This trap indicates the fiber length is changed
fiberLengthChangedWarningAlarmCleared
.1.3.6.1.4.1.6296.0.612
This trap indicates the fiber length trap is cleared
ponOnuFrameReplicationAlarm
.1.3.6.1.4.1.6296.0.613
This trap indicates the frame is replicated.
ponOnuFrameReplicationAlarmCleared
.1.3.6.1.4.1.6296.0.614
This trap indicates the frame is replicated.
ponOnuRxpowerWarnOverHigh
.1.3.6.1.4.1.6296.0.615
This trap indicates the ONU RX-power high over warning
ponOnuRxpowerWarnOverHighCleared
.1.3.6.1.4.1.6296.0.616
This trap indicates the ONU RX-power high over warning is cleared
ponOnuRxpowerWarnUnderLow
.1.3.6.1.4.1.6296.0.617
This trap indicates the ONU RX-power low under warning
ponOnuRxpowerWarnUnderLowCleared
.1.3.6.1.4.1.6296.0.618
This trap indicates the ONU RX-power low under warning is cleared
ponOnuRxpowerAlarmOverHigh
.1.3.6.1.4.1.6296.0.619
This trap indicates the ONU RX-power high over alarm
adslAturPerfLossThresh
.1.3.6.1.4.1.6296.0.62
Loss of signal threshold reached(ATUR).
ponOnuRxpowerAlarmOverHighCleared
.1.3.6.1.4.1.6296.0.620
This trap indicates the ONU RX-power high over alarm is cleared
ponOnuRxpowerAlarmUnderLow
.1.3.6.1.4.1.6296.0.621
This trap indicates the ONU RX-power low under alarm
ponOnuRxpowerAlarmUnderLowCleared
.1.3.6.1.4.1.6296.0.622
This trap indicates the ONU RX-power low under alarm is cleared
ponOnuUniLinkDown
.1.3.6.1.4.1.6296.0.623
This trap indicates the Onu Uni link is down.
ponOnuUniLinkUp
.1.3.6.1.4.1.6296.0.624
This trap indicates the Onu Uni link is up.
adslAturPerfLprsThresh
.1.3.6.1.4.1.6296.0.63
Loss of power threshold reached (ATUR).
adslAturPerfESsThresh
.1.3.6.1.4.1.6296.0.64
Errored Seconds threshold reached (ATUR).
vdslCPEChangeInfoTrap
.1.3.6.1.4.1.6296.0.65
Trap is sent with CPE Serial No., Mac Address of CPE, after CPE serial change.
vdslArulePacketDropTrap
.1.3.6.1.4.1.6296.0.66
Packet Dropped by arule .
portMododuleInstall
.1.3.6.1.4.1.6296.0.69
port module install
powerInstalled
.1.3.6.1.4.1.6296.0.7
Power Installed trap when power was installed.
portMododuleRemove
.1.3.6.1.4.1.6296.0.70
port module remove
cfgdBlocked
.1.3.6.1.4.1.6296.0.71
Cfgdblocked Trap is sent when a certain port is blocked by cpu-flood-guard mechanism.
cfgdReleased
.1.3.6.1.4.1.6296.0.72
CfgdReleased Trap is sent when a certain port is non-blocked by cpu-flood-guard mechanism.
cfgdOverThreshold
.1.3.6.1.4.1.6296.0.73
CfgdReleased Trap is sent when a certain port is over threshold by cpu-flood-guard mechanism.
cfgdUnderThreshold
.1.3.6.1.4.1.6296.0.74
CfgdReleased Trap is sent when a certain port is under threshold by cpu-flood-guard mechanism.
sfgdBlocked
.1.3.6.1.4.1.6296.0.75
Sfgdblocked Trap is sent when a certain port is blocked by system-flood-guard mechanism.
sfgdReleased
.1.3.6.1.4.1.6296.0.76
SfgdReleased Trap is sent when a certain port is non-blocked by system-flood-guard mechanism.
sfgdOverThreshold
.1.3.6.1.4.1.6296.0.77
SfgdReleased Trap is sent when a certain port is over threshold by system-flood-guard mechanism.
sfgdUnderThreshold
.1.3.6.1.4.1.6296.0.78
SfgdReleased Trap is sent when a certain port is under threshold by system-flood-guard mechanism.
ppsControlBlocked
.1.3.6.1.4.1.6296.0.79
PpsControlblocked Trap is sent when a certain port is blocked by PPS-Control mechanism.
powerRemoved
.1.3.6.1.4.1.6296.0.8
Power removed trap when power was removed.
ppsControlReleased
.1.3.6.1.4.1.6296.0.80
PpsControlReleased Trap is sent when a certain port is non-blocked by PPS-Control mechanism.
ppsControlOverThreshold
.1.3.6.1.4.1.6296.0.81
PpsControlReleased Trap is sent when a certain port is over threshold by PPS-Control mechanism.
ppsControlUnderThreshold
.1.3.6.1.4.1.6296.0.82
PpsControlReleased Trap is sent when a certain port is under threshold by PPS-Control mechanism.
nosRemoteUpgradeRequest
.1.3.6.1.4.1.6296.0.83
This trap indicates that the system received nos-remote-upgrade command.
nosRemoteUpgradeSuccess
.1.3.6.1.4.1.6296.0.84
This trap indicates that the NOS succeeded to upgrade NOS.
nosRemoteUpgradeFailAbort
.1.3.6.1.4.1.6296.0.85
This trap indicates that the system failed to upgrade NOS by user interrupt
nosRemoteUpgradeFailHeaderError
.1.3.6.1.4.1.6296.0.86
This trap indicates that the system failed to upgrade NOS, for NOS header-error.
nosRemoteUpgradeFailDownloadError
.1.3.6.1.4.1.6296.0.87
This trap indicates that the system failed to upgrade NOS, for NOS checksum-error
nosRemoteUpgradeFailFlashError
.1.3.6.1.4.1.6296.0.88
This trap indicates that the system failed to upgrade NOS, for flash operation
nosRemoteUpgradeStart
.1.3.6.1.4.1.6296.0.89
This trap indicates that the upgrade NOS process was started.
fanInstalled
.1.3.6.1.4.1.6296.0.9
Fan Installed trap when fan was installed.
systemDyingGasp
.1.3.6.1.4.1.6296.0.90
This trap indicates that Dying-gasp for power fault.
attackGuardBlock
.1.3.6.1.4.1.6296.0.91
This trap indicates that some port is blocked by attack-guard.
attackGuardUnBlock
.1.3.6.1.4.1.6296.0.92
This trap indicates that some port is unblocked by attack-guard.
fanPeriodicFault
.1.3.6.1.4.1.6296.0.93
This trap indicates the fan status is fault in some period.
remoteOamDyingGasp
.1.3.6.1.4.1.6296.0.94
This trap indicates the remote oam entity is in dying-gasp .
remoteOamDyingGaspRestoration
.1.3.6.1.4.1.6296.0.95
This trap indicates the remote oam entity is restored.
arpInspectInvalid
.1.3.6.1.4.1.6296.0.96
This trap indicates the ARP inspection is invalided.
systemSwitchover
.1.3.6.1.4.1.6296.0.97
This trap indicates the system is switchover.
boardChangeState
.1.3.6.1.4.1.6296.0.98
This trap indicates the board state is changed.
redConfigurationMisMatch
.1.3.6.1.4.1.6296.0.99
Configurations of Active and Standby SFU are different.
portInstalled