DAMOCLES-MIB Table View

A list of binary input entries.

inpEntry row .1.3.6.1.4.1.21796.3.4.1.1

An entry containing information applicable
to a particular binary input.

Indexes

inpIndex

Column	Syntax	OID
inpIndexmandatory The binary input index.	PositiveInteger Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.21796.3.4.1.1.1
inpValuemandatory The binary input value.	OnOff Type Values: 0 off 1 on	.1.3.6.1.4.1.21796.3.4.1.1.2
inpNamemandatory The binary input name.	IONamer/w Type Constraints: range: 0..20	.1.3.6.1.4.1.21796.3.4.1.1.3
inpAlarmSetupmandatory You can enable alarm for this binary input. Alarm can be inactive or active for On/Off state.	InputAlarmSetupr/w Type Values: 0 inactive 1 activeOff 2 activeOn	.1.3.6.1.4.1.21796.3.4.1.1.4
inpAlarmStatemandatory The binary input alarm state.	InputAlarmState Type Values: 0 normal 1 alarm	.1.3.6.1.4.1.21796.3.4.1.1.5
inpCountermandatory Number of pulses on this input. Entering edge is used to increment this counter. Only pulses longer than sampling interval are counted.	NonNegativeIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.21796.3.4.1.1.6

A list of binary output entries.

outEntry row .1.3.6.1.4.1.21796.3.4.2.1

An entry containing information applicable
to a particular binary output.

Indexes

outIndex

Column	Syntax	OID
outIndexmandatory The binary output index.	PositiveInteger Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.21796.3.4.2.1.1
outValuemandatory The binary output value. 0 off(open), 1 on(close)	OnOffr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.21796.3.4.2.1.2
outNamemandatory The binary output name.	IONamer/w Type Constraints: range: 0..20	.1.3.6.1.4.1.21796.3.4.2.1.3
outTypemandatory The binary output type. 0 relay (off, on), 1 rts (-10,+10V), 2 dtr (0,10V)	OutputType Type Values: 0 onOff 1 rts 2 dtr	.1.3.6.1.4.1.21796.3.4.2.1.4
outModemandatory The binary output mode. 0 manual, 1 autoAlarm, 2 autoTriggerEq, 3 autoTriggerHi, 4 autoTriggerLo	OutputModer/w Type Values: 0 manual 1 autoAlarm 2 autoTriggerEq 3 autoTriggerHi 4 autoTriggerLo	.1.3.6.1.4.1.21796.3.4.2.1.5
outInitmandatory The binary output value after power-up. 0 off(open), 1 on(close)	OnOffr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.21796.3.4.2.1.6

A list of sensor table entries. The number
of entries corresponds with number of detected sensors.

sensEntry row .1.3.6.1.4.1.21796.3.4.3.1

An entry containing information applicable to a
particular sensor.

Indexes

sensIndex

Column	Syntax	OID
sensIndexmandatory The sensor index.	PositiveInteger Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.21796.3.4.3.1.1
sensNamemandatory The sensor name.	SensorName Type Constraints: range: 0..15	.1.3.6.1.4.1.21796.3.4.3.1.2
sensStatemandatory The sensor state.	SensorState Type Values: 0 invalid 1 normal 2 alarmstate 3 alarm	.1.3.6.1.4.1.21796.3.4.3.1.4
sensStringmandatory The string representation of sensor value.	SensorString Type Constraints: range: 0..10	.1.3.6.1.4.1.21796.3.4.3.1.5
sensValuemandatory The integer (decimal * 10) representation of sensor value.	SensorValue	.1.3.6.1.4.1.21796.3.4.3.1.6
sensValueRawmandatory The original raw value of sensor (it differs for each sensor type, especially 1-Wire sensors have different precisions).	SensorValue	.1.3.6.1.4.1.21796.3.4.3.1.7
sensIDmandatory The sensor ID.	SensorID Type Constraints: range: 0..65535	.1.3.6.1.4.1.21796.3.4.3.1.8
sensUnitmandatory The sensor unit.	UnitType Type Values: 0 celsius 1 fahrenheit 2 kelvin 3 percent 4 volt 5 miliAmper 6 noUnit 7 pulse 8 switch 9 dewPoint 10 absoluteHumidity 11 pressure 12 universal	.1.3.6.1.4.1.21796.3.4.3.1.9
sensUnitStringmandatory The string representation of sensor unit.	SensorUnitString Type Constraints: range: 0..4	.1.3.6.1.4.1.21796.3.4.3.1.10

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
tsAlarmId equal to 1, and increments the value of
tsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of tsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
tsAlarmId might have wrapped.
          
The number of rows in the table at any given time is
reflected by the value of tsAlarmsPresent.

tsAlarmEntry row .1.3.6.1.4.1.21796.3.4.50.2.1

An entry containing information applicable
to a particular alarm.

Indexes

tsAlarmIdx

Column	Syntax	OID
tsAlarmIdxmandatory An index to alarm table.	PositiveInteger Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.21796.3.4.50.2.1.1
tsAlarmIdmandatory A unique identifier for an alarm condition. This value must remain constant.	PositiveInteger Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.21796.3.4.50.2.1.2
tsAlarmDescrmandatory Description of the alarm condition.	Enumeration Enumerated Values: 1 inputStateAlarm 2 temperatureOutOfRange	.1.3.6.1.4.1.21796.3.4.50.2.1.3
tsAlarmSensNamemandatory Name of sensor with alarm condition.	SensorName Type Constraints: range: 0..15	.1.3.6.1.4.1.21796.3.4.50.2.1.4
tsAlarmTimemandatory The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of tsAlarmTime shall equal 0.	TimeStamp	.1.3.6.1.4.1.21796.3.4.50.2.1.5

A list of sensor table setup entries. The number
of entries corresponds with number of detected sensors.

sensSetupEntry row .1.3.6.1.4.1.21796.3.4.99.1.2.1

An entry containing setup information
for a particular sensor.

Indexes

sensSetupIndex

Column	Syntax	OID
sensSetupIndexmandatory The sensor setup table index.	PositiveInteger Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.21796.3.4.99.1.2.1.1
sensSetupNamemandatory The sensor name.	SensorNamer/w Type Constraints: range: 0..15	.1.3.6.1.4.1.21796.3.4.99.1.2.1.2
sensFlagsmandatory The behaviour of sensor - 0x01: range or level detection - 0x02: enable trap sending -- 0x04: output set (thermostat) - 0x08: sensor enabled - 0x10: enable SMS sending - 0x20: enable email sending.	SensorFlagsr/w	.1.3.6.1.4.1.21796.3.4.99.1.2.1.5
sensLimitMinmandatory The sensor low limit.	SensorValuer/w	.1.3.6.1.4.1.21796.3.4.99.1.2.1.6
sensLimitMaxmandatory The sensor high limit.	SensorValuer/w	.1.3.6.1.4.1.21796.3.4.99.1.2.1.7
sensHysteresismandatory The sensor hysteresis.	SensorValuer/w	.1.3.6.1.4.1.21796.3.4.99.1.2.1.8