Com-Server-Intern-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
20
Rows
20
Columns
100
.1.3.6.1.4.1.5040.1.1.1.3.2
·
1 row entry
·
1 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriInterfaceTable'
List of interface numbers for all serial ports.
Interface number.
Indexes
| Column | Syntax | OID |
|---|---|---|
wtSeriInterfaceNomandatory Interface number of the serial port. | Integer32 Constraints: range: 1-4 | .1.3.6.1.4.1.5040.1.1.1.3.2.1.1 |
.1.3.6.1.4.1.5040.1.1.1.3.3
·
1 row entry
·
10 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriUartTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriUartTable'
List of the UART configurations relevant to the interface number of the serial port.
UART parameters for the serial port.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
wtBaudratemandatory Baud rate of the serial CPU port. wtBaudrate-special is read only.If wtBaudDivisor is >0 the value of wtBaudrate is 18 wtBaudrate-14400 is on available with Com-Servers 58211,58411 and 58412. wtBaudrate=11 to wtBaudrat… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.3.1.1 | ||||||||||||||||||||||||||||||||||||
wtParitymandatory Parity | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.3.1.2 | ||||||||||||||||||||||||||||||||||||
wtDatabitsmandatory Number of data bits | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.3.1.3 | ||||||||||||||||||||||||||||||||||||
wtStopbitsmandatory Number of stop bits | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.3.1.4 | ||||||||||||||||||||||||||||||||||||
wtHsLinesmandatory These two octets are interpreted bit-by-bit and describe individual values for configuring the handshake procedure. Bit 0 corresponds to the LSB. Octet Bit Name Description ---- ---- -------… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.3.1.5 | ||||||||||||||||||||||||||||||||||||
wtHsFunctionsmandatory This octet is interpreted bit-by-bit and describes functions which can be assigned to the handshake lines. Bit 0 corresponds to the LSB. Octet Bit Name Description ---- ---- ------------ … | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.5040.1.1.1.3.3.1.6 | ||||||||||||||||||||||||||||||||||||
wtUartFifomandatory Send/Receive Fifo Trigger Level of the UART port | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.3.1.7 | ||||||||||||||||||||||||||||||||||||
wtUartBaudratemandatory Baud rate of the UART port. With Com-Server 58631 and 58431 wtBaudrate istead of wtUartBaudrate must be used. wtUartBaudrate-special is read only. If wtUartBaudDivisor is >0 the value of wtUartBaudrate is 18 | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.3.1.8 | ||||||||||||||||||||||||||||||||||||
wtBaudDivisormandatory Baud Divisor of the serial p ort (special baud rate). | Integer32r/w Constraints: range: 0-32767 | .1.3.6.1.4.1.5040.1.1.1.3.3.1.9 | ||||||||||||||||||||||||||||||||||||
wtSeriInQueuemandatory Serial Receive Buffer in Bytes. The value must be even. The maximum value for allmodels with more than one serial port and also the Office, Compact and 19' versions is 3070 bytes. For all other Com-Server models the ma… | Integer32r/w Constraints: range: 32-4094 | .1.3.6.1.4.1.5040.1.1.1.3.3.1.10 |
.1.3.6.1.4.1.5040.1.1.1.3.4
·
1 row entry
·
9 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriPortTable'
List of the general port entries relevant to the interface number of the serial port.
Port entries for the serial port.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
wtSeriLocalPortmandatory Local TCP/UDP port number of the Com-Server port on which the Com-Server accepts a TCP connection or which it used in TCP client mode or UDP mode as a local port. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.5040.1.1.1.3.4.1.1 | ||||||||||||||||||||||
wtSeriPortModemandatory This parameter specifies the mode of the Com-Server port. Depending on which mode is set, the corresponding list of the relevant parameters is available. If for example Upd mode (wtSeriPortMode = 6) is configured, only… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.4.1.2 | ||||||||||||||||||||||
wtSeriControlPortmandatory TCP port number of the Com-Server's control port. In TCP client or TCP server mode this port allows to change settings like baud rate, parity etc. of the serial interface. The control port can be opened in addition to… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.4.1.3 | ||||||||||||||||||||||
wtSeriPortStatemandatory This value specifies the the connection state of the serial port.0=Server mode, no connection 1=Server mode, active connection 2=Special mode, attempting to establish a connection 3=Special mode, active connection or s… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.4.1.4 | ||||||||||||||||||||||
wtSeriRemotePortmandatory If the serial port has an active TCP or UDP connection, this value shows the port number of the remote host. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.4.1.5 | ||||||||||||||||||||||
wtSeriRemoteIPmandatory If the serial port has an active TCP or UDP connection, this value shows the IP address of the remote host. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.4.1.6 | ||||||||||||||||||||||
wtSeriNetPckDelaymandatory This value indicates the minimum wait time in 10ms ticks of the Com-Server after the arrival of serial data. After this time has expired, it packs the data into a network packet and sends them to the respective commun… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.4.1.10 | ||||||||||||||||||||||
wtSeriFlushBufmandatory If this switch is active (2), the serial buffer is flushed each time a new connection is opened; any residual data which could not be sent (e.g., handshake stop of the serial terminal device) are therefore lost. But i… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.4.1.11 | ||||||||||||||||||||||
wtSeriTelnetEchomandatory When opening a Telnet connection, there is negotiation on the networkside to determine who generates the echo of the characters sent by the client. Either the client application generates a local echo, or the Telnet se… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.4.1.12 |
.1.3.6.1.4.1.5040.1.1.1.3.5
·
1 row entry
·
10 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriTcpClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriTcpClientTable'
List of all serial ports in TCP client mode relevant to their interface number.
TCP-Client-Mode parameters
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
wtSeriTcpServerPortmandatory Port number which the application (TCP server process) addresses on the computer. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.1 | ||||
wtSeriTcpServerIpmandatory IP address of the computer on which the application (TCP server process) is active. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.2 | ||||
wtSeriTcpInactTimeoutmandatory Connection timeout in seconds. If no data are exchanged within thespecified time, the Com-Server closes the connection to the server. The value 0 deactivates the timer. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.3 | ||||
wtSeriTcpConnectTimeoutmandatory Connection timeout in seconds. This value is only effective inconjunction with an activated Inactivity Timeout. After the Inactivity Timeout has expired, the Com-Server attempts for the duration of the Connection Timeo… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.4 | ||||
wtSeriTcpDisconnectCharmandatory If the Com-Server receives the character set here on the serial port, theconnection to the TCP server is closed. The character itself is not sent to the TCP server. The value 0 deactivates this mode. | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.5 | ||||
wtSeriTcpDispString1mandatory These parameters allow compact sending of serial data to the network;the serial data stream is not broken up randomly, but rather serial packets can be sent in their original context even over the network as one pack… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.6 | ||||
wtSeriTcpDispString2mandatory See DESCRIPTION of wtSeriTcpDispString1. | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.5.1.7 | ||||
wtSeriTcpCAddressmandatory Activating this switch activates TCP client mode for changing TCP servers. The address of the TCP server does not have to be permanently configured, but rather is sent on the serial interface before the user data as a… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.5.1.8 | ||||
wtSeriTcpResponseModemandatory In Response Mode the application, special characters are output which are used to inform the application in the serial terminal device about the network-side connection status of the Com-Server This function is only … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.5.1.10 | ||||
wtSeriTcpServerUrlmandatory URL of the computer on which your application (TCP server process) is active. The URLcan be used instead of an IP address and only in conjunction with a valid DNS server. The URL contains a maximum of 64 characters and… | OctetStringr/w | .1.3.6.1.4.1.5040.1.1.1.3.5.1.11 |
.1.3.6.1.4.1.5040.1.1.1.3.6
·
1 row entry
·
10 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriUdpClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriUdpClientTable'
List of all serial ports in UDP mode relevant to their interface number
UDP mode parameters
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
wtSeriUdpServerPortmandatory Port number which the application (UDP server process) addresses on the computer. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.6.1.1 | ||||
wtSeriUdpServerIpmandatory IP address of the computer on which the application (UDP server process) is active. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.6.1.2 | ||||
wtSeriUdpDispString1mandatory These parameters allow compact sending of serial data to the network;the serial data stream is not broken up randomly, but rather serial packets can be sent in their original context even over the network as one packet… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.6.1.3 | ||||
wtSeriUdpDispString2mandatory See DESCRIPTION of wtSeriUdpDispString1. | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.6.1.4 | ||||
wtSeriUdpSeriProtocolmandatory The protocol mode which can be activated here has been replaced by the 'Serial Socket Interface' (Mode: Multiport Protocol). For reasons of downward compatibility the functions are still available, but for new projects… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.6.1.5 | ||||
wtSeriUdpSeriCodingmandatory See DESCRIPTION of wtSeriUdpSeriProtocol. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.6.1.6 | ||||
wtSeriUdpCAddressmandatory Activating this option activates UDP client mode for changing UDPservers. The address of the UDP server does not have to be permanently configured, but rather is sent on the serial interface before the user data as … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.6.1.7 | ||||
wtSeriUdpWrCAddressmandatory Set this switch to active (2) to output the address of the sender in ASCII format before sending the data of a UDP datagram to the serial port. The string always contains 22 characters. Format: C IP address, port numb… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.6.1.8 | ||||
wtSeriUdpDisconnectCharmandatory This parameter is only evaluated if the variable wtSeriUdpCAddress isactivated. If the Com-Server port on the serial interface receives the character configured here, it deletes the last serially received UDP server ad… | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.5040.1.1.1.3.6.1.9 | ||||
wtSeriUdpServerUrlmandatory URL of the computer on which your application (UDP process) is active. The URLcan be used instead of an IP address and only in conjunction with a valid DNS server. The URL contains a maximum of 64 characters and is ter… | OctetStringr/w | .1.3.6.1.4.1.5040.1.1.1.3.6.1.10 |
.1.3.6.1.4.1.5040.1.1.1.3.7
·
1 row entry
·
6 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriTelnetClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriTelnetClientTable'
List of all serial ports in Telnet client mode relevant to their interface number
Telnet client mode parameters
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
wtSeriTelnetServerPortmandatory Port number addressed by the Telnet server (Standard Telnet-Port: 23). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.7.1.1 | ||||
wtSeriTelnetServerIpmandatory IP address of the computer on which the Telnet server is active. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.7.1.2 | ||||
wtSeriTelnetInactTimeoutmandatory Timeout in seconds after which the Com-Server port closes the connection. The timer is reset when there is an active network connection if data are being exchanged. If however no data are sent during the specified tim… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.7.1.3 | ||||
wtSeriTelnetDisconnectCharmandatory If the Com-Server port receives the character configured here on the serial port, the Com-Server port closes the connection to the Telnet server. It is important that this value not be used within a Telnet session, s… | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.5040.1.1.1.3.7.1.4 | ||||
wtSeriTelnetChangeLineoutmandatory If this switch is activated, a 00H is appended to the serially received character 0DH: 0DH 00H is thus sent over the network. This option may need to be activated when sending binary data. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.7.1.5 | ||||
wtSeriTelnetServerUrlmandatory URL of the computer on which your application (Telnet server process) is active. The URLcan be used instead of an IP address and only in conjunction with a valid DNS server. The URL contains a maximum of 64 characters … | OctetStringr/w | .1.3.6.1.4.1.5040.1.1.1.3.7.1.6 |
.1.3.6.1.4.1.5040.1.1.1.3.8
·
1 row entry
·
8 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriFtpClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriFtpClientTable'
List of all serial ports in FTP client mode relevant to their interface number
FTP client mode parameters
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
wtSeriFtpServerPortmandatory Port number which addresses the FTP server (Standard FTP-Port: 21). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.8.1.1 | ||||
wtSeriFtpServerIpmandatory IP address of the computer on which the FTP server is active. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.8.1.2 | ||||
wtSeriFtpAutoFtpmandatory Set this switch to 2 to activate the automatic FTP client. This mode isrecommended when the same command needs to be executed over and over. The FTP commands are stored in the Com-Server. The latter opens a connection… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.8.1.3 | ||||
wtSeriFtpLoginStringmandatory Command sequence for the FTP login in 'Automatic FTP-Client' mode.FTP client commands: TYPE A or I Activation of ASCII or binary mode STOR File Saves all serially received data to a file APPE File Appen… | OctetStringr/w | .1.3.6.1.4.1.5040.1.1.1.3.8.1.4 | ||||
wtSeriFtpInactTimeoutmandatory Configure the commands STOR and APPE(nd) with a timeout in seconds for closing the connection. If during this time no serial data are received, the FTP client closes the connection to the FTP server. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.8.1.5 | ||||
wtSeriFtpConnectTimeoutmandatory Connection timeout in seconds. This value is only effective in conjunction with an activated Inactivity Timeout. After the Inactivity Timeout has expired, the Com-Server attempts for the duration of the Connection Ti… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.3.8.1.6 | ||||
wtSeriFtpProtocolCharmandatory When the Com-Server receives the character configured here on its serial port, the Com-Server port closes the connection to the FTP server. This is also used as a final character for the login string (Variable wtSeriF… | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.5040.1.1.1.3.8.1.7 | ||||
wtSeriFtpServerUrlmandatory URL of the computer on which your application (FTP server process) is active. The URLcan be used instead of an IP address and only in conjunction with a valid DNS server. The URL contains a maximum of 64 characters and… | OctetStringr/w | .1.3.6.1.4.1.5040.1.1.1.3.8.1.8 |
.1.3.6.1.4.1.5040.1.1.1.3.9
·
1 row entry
·
3 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriMultiPortPrtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriMultiPortPrtTable'
List of all serial ports in multiport protocol mode relevant to their interface number
Multiport-Protocol-Mode parameters
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
wtSeriPrtSeriProtocolmandatory This switch activates/deactivates the Serial Socket Interface. Detailed protocol documentation is available on our Web site (http://www.wut.de) for downloading. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.9.1.1 | ||||
wtSeriPrtSeriCodingmandatory This switch activated character doubling. It ensures reliable packet frame detection when transmitting binary data, without having to exclude certain characters. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.9.1.2 | ||||
wtSeriPrtProtocolCharmandatory If character doubling is not used, configure here a packet frame character. This character is not allowed to be used in the data stream. | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.5040.1.1.1.3.9.1.3 |
.1.3.6.1.4.1.5040.1.1.1.3.10
·
1 row entry
·
4 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriB2bMasterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriB2bMasterTable'
List of all serial ports in Box-to-Box Master Mode relevant to their interface number.
Box-to-Box-Master-Mode parameters.
Indexes
| Column | Syntax | OID |
|---|---|---|
wtSeriB2bMaster-SlavePortmandatory Port number of the serial Com-Server-Slave port. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.5040.1.1.1.3.10.1.1 |
wtSeriB2bMaster-SlaveIpmandatory IP address of the Com-Server in which the slave port is located. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.10.1.2 |
wtSeriB2bMaster-DispString1mandatory This mode allows compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent in their original context even over the network as one packet. E… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.10.1.3 |
wtSeriB2bMaster-DispString2mandatory See DESCRIPTION for wtSeriB2bMaster-DispString1. | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.10.1.4 |
.1.3.6.1.4.1.5040.1.1.1.3.11
·
1 row entry
·
4 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriB2bSlaveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriB2bSlaveTable'
List of all serial ports in Box-to-Box-Slave-Mode relevant to their interface number
Box-to-Box-Slave-Mode parameters.
Indexes
| Column | Syntax | OID |
|---|---|---|
wtSeriB2bSlave-MasterPortmandatory Port number of the serial Com-Server Master port. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.5040.1.1.1.3.11.1.1 |
wtSeriB2bSlave-MasterIpmandatory IP address of the Com-Server in which the Master port is located. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.11.1.2 |
wtSeriB2bSlave-DispString1mandatory This mode allow compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent in their original context even over the network as one packet. En… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.11.1.3 |
wtSeriB2bSlave-DispString2mandatory See DESCRIPTION of wtSeriB2bSlave-DispString1. | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.3.11.1.4 |
.1.3.6.1.4.1.5040.1.1.1.3.12
·
1 row entry
·
2 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriIpBusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriIpBusTable'
List of all serial ports in IP-Bus-Mode relevant to their interface number
IP-Bus-Mode parameters.
Indexes
| Column | Syntax | OID |
|---|---|---|
wtSeriBusSlave-MasterIpmandatory Setting on Com-Server ports connected to Slaves: Set here the complete IP address of the Com-Server with the Master port. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.12.1.1 |
wtSeriBusMaster-SubnetIpmandatory Setting on a Com-Server port connected to the Master: Enter here the network address of the Subnet in which the Master and Slaves are located. It is sufficient to entry any value not equal to zero (e.g., 1.0.0.0); the… | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.12.1.2 |
.1.3.6.1.4.1.5040.1.1.1.3.13
·
1 row entry
·
2 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtSeriSlipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtSeriSlipTable'
List of all ports in SLIP-Mode relevant to their interface number
SLIP-Mode parameters.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
wtSeriSlipNetAddressmandatory Enter here the network address of the serially connected Subnet to which you want to route using SLIP. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.3.13.1.1 | ||||
wtSeriSlipNetRoutingmandatory If this parameter has a value of 2, the Com-Server operates as a router for the Subnet specified under wtSeriSlipNetAddress. If the parameter has a value of 1, the Com-Server is transparent, i.e. all packets sent to t… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.3.13.1.2 |
.1.3.6.1.4.1.5040.1.1.1.4.2
·
1 row entry
·
1 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtDeaInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtDeaInterfaceTable'
List of interface numbers of all digital I/O ports.
Interface number
Indexes
| Column | Syntax | OID |
|---|---|---|
wtDeaInterfaceNomandatory Interface number of the digital I/O ports. | Integer32 Constraints: range: 1-4 | .1.3.6.1.4.1.5040.1.1.1.4.2.1.1 |
.1.3.6.1.4.1.5040.1.1.1.4.3
·
1 row entry
·
3 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtDeaPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtDeaPortTable'
List of the general port entries relevant to the interface number of the digital I/O ports.
Port entries of the digital I/O ports.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
wtDeaLocalPortmandatory Local TCP/UDP port number of the Com-Server port. Port number on which the Com-Server accepts a TCP connection or which it uses as a local port in TCP client mode or UDP mode. | Integer32r/w Constraints: range: 49152-65535 | .1.3.6.1.4.1.5040.1.1.1.4.3.1.1 | ||||||||||||
wtDeaPortModemandatory This parameter specifies the mode for the Com-Server port. Depending on which mode is set, the corresponding list of the relevant parameters is available. If for example UDP mode (wtDeaPortMode = 4) is configured, only… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.4.3.1.2 | ||||||||||||
wtDeaDrvWatchdogmandatory This parameter allows control of all instances which are active betweenthe card driver in the Com-Server and the application on the computer, including the computer itself (e.g., TCP/IP stack in the computer, network… | Integer32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.5040.1.1.1.4.3.1.3 |
.1.3.6.1.4.1.5040.1.1.1.4.4
·
1 row entry
·
5 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtDeaTcpClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtDeaTcpClientTable'
List of all digital I/O ports in TCP-Client-Mode relevant to their interface number
TCP-Client-Mode parameters
Indexes
| Column | Syntax | OID |
|---|---|---|
wtDeaTcpServerPortmandatory Port number which the application (TCP server process) addresses on the computer. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.4.1.1 |
wtDeaTcpServerIpmandatory IP address of the computer on which the application (TCP server process) is active. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.4.4.1.2 |
wtDeaTcpInactTimeoutmandatory Connection timeout in seconds. If no data are exchanged within the specified time, the Com-Server closes the connection to the TCP server. The value 0 deactivates the timer. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.4.1.3 |
wtDeaTcpConnectTimeoutmandatory Connection timeout in seconds. This value is only effective in conjunction with an activated inactivity timeout. After the inactivity timeout has expired, the Com-Server attempts to send any remaining unsent user dat… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.4.1.4 |
wtDeaTcpInputMaskmandatory Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, the TCP connection to the application (TCP server) is opened and the I/O structure 'Write Register' is… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.4.4.1.5 |
.1.3.6.1.4.1.5040.1.1.1.4.5
·
1 row entry
·
5 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtDeaUdpClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtDeaUdpClientTable'
List of all digital I/O ports in UDP-Mode relevant to their interface number
UDP-Mode parameters
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
wtDeaUdpServerPortmandatory Port number which the application (UPD server process) on the computer addresses. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.5.1.1 | ||||
wtDeaUdpServerIpmandatory IP address of the computer on which the application (UDP server process) is active. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.4.5.1.2 | ||||
wtDeaUdpPacketProtocolmandatory This switch activates (2) or deactivates (1) of the control procedure for the packet sequence in UDP mode (see also manual for I/O Com-Server. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.5040.1.1.1.4.5.1.3 | ||||
wtDeaUdpInputMaskmandatory Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, the TCP connection to the application (TCP server) is opened and the I/O structure 'Write Register' is… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.4.5.1.4 | ||||
wtDeaUdpSendIntervalmandatory Configurable interval with a 100ms base, in which the card driver sends the I/O structure 'Write Register' with the contents of the input register to the configured application (UDP server). The value 0 deactivates th… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.5.1.5 |
.1.3.6.1.4.1.5040.1.1.1.4.6
·
1 row entry
·
3 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtDeaSnmpAgentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtDeaSnmpAgentTable'
List of all digital I/O ports in Snmp-Agent-Mode relevant to their interface number
Snmp-Agent-Mode parameters
Indexes
| Column | Syntax | OID |
|---|---|---|
wtDeaSnmpManagerIpmandatory IP address of the computer on which the SNMP Manager is located to which the Com-Server should send SNMP traps. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.4.6.1.1 |
wtDeaSnmpInputMaskmandatory Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, an SNMP trap with the variable dDrvInputRegister (see TRAP-DEFINITIONS) is sent to the configured SNMP … | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.4.6.1.2 |
wtDeaSnmpSendIntervalmandatory Configurable interval with a 100ms base, in which the card driver reads the input register and sends an SNMP trap with the variable dDrvInputRegister (see TRAP-DEFINITIONS) to the configured SNMP Manager. A value of 0… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.6.1.3 |
.1.3.6.1.4.1.5040.1.1.1.4.7
·
1 row entry
·
4 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtDeaB2bMasterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtDeaB2bMasterTable'
List of all digital I/O ports in Box-to-Box-Master-Mode relevant to their interface number
Box-to-Box-Master-Mode parameters
Indexes
| Column | Syntax | OID |
|---|---|---|
wtDeaB2bMaster-SlavePortmandatory Port number of the digital I/O Com-Server-Slave port. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.7.1.1 |
wtDeaB2bMaster-SlaveIpmandatory IP address of the I/O Com-Server in which the Slave port is located. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.4.7.1.2 |
wtDeaB2bMaster-InputMaskmandatory Here the inputs to be polled by the card drive are configured. When a level change occurs on one or more inputs, the entire input register is sent over the network and mapped in the output register of the other Com- … | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.4.7.1.3 |
wtDeaB2bMaster-SendIntervalmandatory Configurable interval with a 100ms base, in which the card driver maps the input register to the output register of the other I/O port. A value of 0 deactivates this mode. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.7.1.4 |
.1.3.6.1.4.1.5040.1.1.1.4.8
·
1 row entry
·
4 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtDeaB2bSlaveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtDeaB2bSlaveTable'
List of all digital I/O ports in Box-to-Box-Slave-Mode relevant to their interface number
Box-to-Box-Slave-Mode parameters
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
wtDeaB2bSlave-MasterPortmandatory Port number of the digital I/O Com-Server-Master port. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.8.1.1 | ||||
wtDeaB2bSlave-MasterIpmandatory IP address of the I/O Com-Server in which the Master port is located. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.5040.1.1.1.4.8.1.2 | ||||
wtDeaB2bSlave-InputMaskmandatory Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, the entire input register is sent over the network and mapped in the output register of the other Com- … | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.1.4.8.1.3 | ||||
wtDeaB2bSlave-SendIntervalmandatory Configurable interval with a 100ms base, in which the card driver maps the input register to the output register of the other I/O port. The value 0 deactivates this mode. | Integer32r/w Enumerated Values:
Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.1.4.8.1.4 |
.1.3.6.1.4.1.5040.1.1.2.1
·
1 row entry
·
6 columns
Uses the webgraph variant from
Command help
/opt/observium/mibs/webgraph.
Walk wtDeaDrvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Com-Server-Intern-MIB' -M '/opt/observium/mibs/webgraph:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Com-Server-Intern-MIB::wtDeaDrvTable'
List of all functions for managing the digital I/O port relevant to their interface number.
Functions for managing a digital I/O port.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
wtDeaDrvInterfaceNomandatory Interface number of the digital I/O port. | Integer32 Constraints: range: 1-4 | .1.3.6.1.4.1.5040.1.1.2.1.1.1 | ||||||||||
wtDeaDrvInputRegistermandatory This variable is used to read the outputs of the digital I/O port.The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1, Bit 0-3: Digital outputs 8-11 … | OctetString Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.2.1.1.2 | ||||||||||
wtDeaDrvOutputRegistermandatory This variable is used to read and write the outputs of the digital I/O port. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1, Bit 0-3: Digital out… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.2.1.1.3 | ||||||||||
wtDeaDrvSetBitmandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first two OCTETS contain the mask which de… | OctetStringr/w Constraints: range: 4-4 | .1.3.6.1.4.1.5040.1.1.2.1.1.4 | ||||||||||
wtDeaDrvTrapInputMaskmandatory Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, an SNMP trap is sent to the configured SNMP Manager with the variable wtDeaDrvInputRegister (see TRAP-… | OctetStringr/w Constraints: range: 2-2 | .1.3.6.1.4.1.5040.1.1.2.1.1.5 | ||||||||||
wtDeaDrvTrapIntervalmandatory Configurable variable with a 100ms basis, in which the card driver reads the input register and sends an SNMP trap to the configured SNMP Manager with the variable wtDeaSnmpSendInterval. This setting is no longer valid… | Integer32r/w Enumerated Values:
Constraints: range: 0-65535 | .1.3.6.1.4.1.5040.1.1.2.1.1.6 |