CYCLADES-ACS5K-CONF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
68
.1.3.6.1.4.1.2925.8.2.6.1.11 · 1 row entry · 3 columns
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk cySerialGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CYCLADES-ACS5K-CONF-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CYCLADES-ACS5K-CONF-MIB::cySerialGroupTable'
This associates group name and its users
cygroupEntry row .1.3.6.1.4.1.2925.8.2.6.1.11.1
One particular association between group name and its users
Indexes
Column Syntax OID
cyGroupIndexnumber to identifier the groupIF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.2925.8.2.6.1.11.1.1
cyGroupNameThe Group NameOctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.2925.8.2.6.1.11.1.2
cyGroupUsersThe users namesOctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.2925.8.2.6.1.11.1.3
.1.3.6.1.4.1.2925.8.2.6.2.1 · 1 row entry · 65 columns
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk cySerialPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CYCLADES-ACS5K-CONF-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CYCLADES-ACS5K-CONF-MIB::cySerialPortTable'
This is the specific configuration to serial port
cysportEntry row .1.3.6.1.4.1.2925.8.2.6.2.1.1
One particular serial port configuration
Indexes
Column Syntax OID
cySPortNumbernumber to identifier the serial port. Value 0 is ALL.IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.2925.8.2.6.2.1.1.1
cySPortTtyThe device name for the serial port.OctetStringr/w
Constraints:
range: 0-25
.1.3.6.1.4.1.2925.8.2.6.2.1.1.2
cySPortNameAlias name given to the server connected to the serial port.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.3
cySPortSpeedThe speed for serial port.Enumerationr/w
Enumerated Values:
50s50bps
75s75bps
110s110bps
134s134bps
150s150bps
200s200bps
300s300bps
600s600bps
1200s1200bps
1800s1800bps
2400s2400bps
4800s4800bps
9600s9600bps
14400s14400bps
19200s19200bps
28800s28800bps
38400s38400bps
57600s57600bps
115200s115200bps
230400s230400bps
460800s460800bps
.1.3.6.1.4.1.2925.8.2.6.2.1.1.4
cySPortDataSizeThe data size for serial port.Integer32r/w
Constraints:
range: 4-8
.1.3.6.1.4.1.2925.8.2.6.2.1.1.5
cySPortStopBitsThe number of stop bits for serial port.Integer32r/w
Constraints:
range: 1-2
.1.3.6.1.4.1.2925.8.2.6.2.1.1.6
cySPortParityThe parity for serial port.OctetStringr/w
Constraints:
range: 0-5
.1.3.6.1.4.1.2925.8.2.6.2.1.1.7
cySPortFlowCtrlThe flow control for serial port.OctetStringr/w
Constraints:
range: 0-5
.1.3.6.1.4.1.2925.8.2.6.2.1.1.8
cySPortDTRdelayThis specifies how long (in miliseconds) a DTR signal
will be turned off before it is turned on again.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.9
cySPortDCDCtrlDCD signal controls the connection request.Enumerationr/w
Enumerated Values:
0notctrl
1control
.1.3.6.1.4.1.2925.8.2.6.2.1.1.10
cySPortLogUtmpACS update the login records in /var/run/utmp file.Enumerationr/w
Enumerated Values:
0inactive
1active
.1.3.6.1.4.1.2925.8.2.6.2.1.1.11
cySPortLogWtmpACS update the login records in /var/run/wtmp file.Enumerationr/w
Enumerated Values:
0inactive
1active
.1.3.6.1.4.1.2925.8.2.6.2.1.1.12
cySPortLogformThis is the format to write login record.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.13
cySPortAuthtypeAuthentication type : .OctetStringr/w
Constraints:
range: 0-25
.1.3.6.1.4.1.2925.8.2.6.2.1.1.14
cySPortAuthSrv1IP address of the primary authentication server.OctetStringr/w
Constraints:
range: 0-46
.1.3.6.1.4.1.2925.8.2.6.2.1.1.15
cySPortAccSrv1IP address of the primary accounting server.OctetStringr/w
Constraints:
range: 0-46
.1.3.6.1.4.1.2925.8.2.6.2.1.1.16
cySPortAuthTmoThis is the timeout (in seconds) for authentication
query to be answered.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.17
cySPortAuthRetrThis defines the number of times each server is tried
before another is contacted.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.18
cySPortAuthSrv2IP address of the secondary authentication server.OctetStringr/w
Constraints:
range: 0-46
.1.3.6.1.4.1.2925.8.2.6.2.1.1.19
cySPortAccSrv2IP address of the secondary accounting server.OctetStringr/w
Constraints:
range: 0-46
.1.3.6.1.4.1.2925.8.2.6.2.1.1.20
cySPortAuthSecretThis is the shared secret with authentciation servers.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.21
cySPortAuthRadPTo accept Radius' user without password.Enumerationr/w
Enumerated Values:
0inactive
1active
.1.3.6.1.4.1.2925.8.2.6.2.1.1.22
cySPortAuthAccaccess restrition on Users.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.23
cySPortProtocolDefines the port serial's protocol.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.24
cySPortRemoteIPThis is the default IP address of the serial port.OctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.2925.8.2.6.2.1.1.25
cySPortSocketPortThis defines an alternative labeling system for the serial port.OctetStringr/w
Constraints:
range: 0-10
.1.3.6.1.4.1.2925.8.2.6.2.1.1.26
cySPortRemHostThe IP address of the host to which the serial port will connect.OctetStringr/w
Constraints:
range: 0-46
.1.3.6.1.4.1.2925.8.2.6.2.1.1.27
cySPortBannerThis defines the banner.OctetStringr/w
Constraints:
range: 0-250
.1.3.6.1.4.1.2925.8.2.6.2.1.1.28
cySPortPromptThis defines the login prompt to the serial port.OctetStringr/w
Constraints:
range: 0-250
.1.3.6.1.4.1.2925.8.2.6.2.1.1.29
cySPortTermTypeThis defines the terminal type.OctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.2925.8.2.6.2.1.1.30
cySPortAutomUsrThis defines the automatic user.OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.31
cySPortNetMaskThe network mask used in dial in connection.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.2925.8.2.6.2.1.1.32
cySPortPppMtuThe PPP MTU - dial in connection.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.33
cySPortPppMruThe PPP MRU - dial in connection.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.34
cySPortPppOptionsThe PPP options when ACS autodetects the PPP session .SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2925.8.2.6.2.1.1.35
cySPortPppFoptionThe PPP forced options when the user has already been authenticated.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2925.8.2.6.2.1.1.36
cySPortModemChatThe initchat send to modem connected.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2925.8.2.6.2.1.1.37
cySPortSttyCmdthe tty settings after socket connection is established.OctetStringr/w
Constraints:
range: 0-180
.1.3.6.1.4.1.2925.8.2.6.2.1.1.38
cySPortSockTxDefines the delay (in miliseconds) before transmission to
the Ethernet of data received through a serial port .
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.39
cySPortSockPollKeep-alive timer (miliseconds) to the TCP connection .SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.40
cySPortSockIdleThe idle timeout in seconds .SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.41
cySPortDBsizeMaximum size of the data buffering file.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.42
cySPortDBtimeTimestamp in data buffering.Enumerationr/w
Enumerated Values:
0inactive
1active
.1.3.6.1.4.1.2925.8.2.6.2.1.1.43
cySPortDBmodeData buffering mode : circ or lineOctetStringr/w
Constraints:
range: 0-5
.1.3.6.1.4.1.2925.8.2.6.2.1.1.44
cySPortDBsyslogsize of the data buffering send to syslog.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.45
cySPortDBmenuMenu of the data buffering.Enumerationr/w
Enumerated Values:
0displayMenu
1inactive
2displayDB
3displayParc
.1.3.6.1.4.1.2925.8.2.6.2.1.1.46
cySPortDBalarmGenerating Alarms.Enumerationr/w
Enumerated Values:
0inactive
1active
.1.3.6.1.4.1.2925.8.2.6.2.1.1.47
cySPortSSHbreakBreak sequence - ssh sessionOctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.2925.8.2.6.2.1.1.48
cySPortSniffSessSniff session typeOctetStringr/w
Constraints:
range: 0-5
.1.3.6.1.4.1.2925.8.2.6.2.1.1.49
cySPortSniffAdmList of admin users to sniff sessionOctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.50
cySPortSniffEscEscape sequence used in sniff sessionOctetStringr/w
Constraints:
range: 0-6
.1.3.6.1.4.1.2925.8.2.6.2.1.1.51
cySPortSniffMsessMultiple sniff sessionsOctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.2925.8.2.6.2.1.1.52
cySPortTelnetModeMode negotiated by client telnet with the serverEnumerationr/w
Enumerated Values:
0text
1binary
.1.3.6.1.4.1.2925.8.2.6.2.1.1.53
cySPortSysBufSessSyslog Buffering at all timesEnumerationr/w
Enumerated Values:
0yes
1no
.1.3.6.1.4.1.2925.8.2.6.2.1.1.54
cySPortLFSuppressLF suppression in socket_server sessionEnumerationr/w
Enumerated Values:
0inactive
1active
.1.3.6.1.4.1.2925.8.2.6.2.1.1.55
cySPortAutoInputThis string is used to auto answer. It's the input stringOctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.56
cySPortAutoOutputThis string is used to auto answer. It's the output stringOctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.57
cySPortPmTypeIPDU type, when the port protocol is configured as IPDUOctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.2925.8.2.6.2.1.1.58
cySPortPmUsersList of users which can access the IPDU and their respective outletsOctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.59
cySPortPmOutletList of <IPDU port>.<outlet> pairs, where the server is connectedOctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.2925.8.2.6.2.1.1.60
cySPortPmKeyHotkey to grant access to the Power Management from a Telnet/SSH sessionOctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.2925.8.2.6.2.1.1.61
cySPortPmNOutletsNumber of outlets of the IPDUSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.62
cySPortBreakIntervalThe break interval in miliseconds.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2925.8.2.6.2.1.1.63
cySPortRemoteIP6This is the default IPv6 address of the serial port.OctetStringr/w
Constraints:
range: 0-46
.1.3.6.1.4.1.2925.8.2.6.2.1.1.64
cySPortPrefix6Port IP address network prefix length.Integer32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.2925.8.2.6.2.1.1.65