CTRON-SFPS-PORT-MIB Table View

This table contains the configuration information of each
configured inbound SFPS switch port.  If SFPS is not
configured on a port, than an entry will not exist.

sfpsInPortConfigEntry row .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1

Each entry specifies the SFPS configuration for the SFPS
inbound switch port for which the entry exists.

Indexes

sfpsInPortConfigPort

Column	Syntax	OID
sfpsInPortConfigPortmandatory The primary index to the SFPS in port table. This identifies the inbound SFPS switch port for which the entry exists.	SfpsSwitchPort	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.1
sfpsInPortConfigAdminStatusmandatory Sets the administrative state of the SFPS inbound switch port for which the entry exists.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled 4 loopback	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.2
sfpsInPortConfigOperStatusmandatory Indicates the current operating condition of the SFPS on the inbound switch port for which this entry exists.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable 6 invalid-config 7 testing	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3
sfpsInPortConfigOperTimemandatory Indicates the elapsed time, in hundredths of a second, that sfpsInPortOperStatus has been in its current operational state on the SFPS inbound switch port for which this entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.4
sfpsInPortConfigTypemandatory Sets the type of port access attribute for the inbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk port…	Enumerationr/w Enumerated Values: 1 other 2 access-port 3 network-port 4 host-mgmt-port 5 host-ctl-port 6 unknown 7 going-to-access 8 hybrid-port 9 stand-by 10 network-only 11 accessOnly 12 raPrimary 13 uplink 14 fclStandby 15 loopStandby 16 raStandby 17 flood 18 uplinkFlood 19 downlinkFlood 20 unknown-ra-standby	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.5
sfpsInPortConfigReservedBWmandatory Sets the amount of Bandwidth that is reserved for the inbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given to another port if unused.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.6
sfpsInPortConfigAllocBWmandatory Sets the amount of Bandwidth that is allocated for the inbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.7
sfpsInPortConfigQoSmandatory Sets the desired QoS service class for the inbound SFPS port for which this entry exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.8
sfpsInPortConfigQSizemandatory Indicates the maximum inbound queue size for this port. Size is indicated in packets (packet descriptors).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.9
sfpsInPortConfigQLenmandatory Indicates the actual inbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current depth of queue.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.10
sfpsInPortConfigSwitchIdmandatory This entry is the id of the port.	OctetString	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.11
sfpsInPortConfigMediaTypemandatory	Enumeration Enumerated Values: 1 ethernet 2 fddi 3 atm-lec 4 token-ring 5 wan 6 inb 7 hcp 8 hdp 9 atm-svc 10 atm-pvc 11 unknown 12 atm-forum-lec 13 atm-forum-pvc 14 atm-forum-svc	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.12
sfpsInPortConfigFrontPanelPortmandatory This represents the front panel physical port number	SfpsSwitchPort	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.13
sfpsInPortConfigLinkStatusmandatory The link status of this port.	Enumeration Enumerated Values: 1 other 2 linkUp 3 linkDown 4 link-N-A	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.14
sfpsInPortConfigLinkStateAgemandatory Number of time ticks that link has been in this state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.15
sfpsInPortConfigRouterPortmandatory Specifies whether this port is a router port.	Enumeration Enumerated Values: 1 other 2 router-port 3 no-router	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.16
sfpsInPortConfigSlotNumbermandatory Slot number in the chassis.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.17
sfpsInPortConfigMib2PortIdmandatory Mib2 Port id	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.18
sfpsInPortConfigTopoAgentmandatory Topology Agent	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.19
sfpsInPortConfigLayer3Learningmandatory Topology Agent	Enumeration Enumerated Values: 1 other 2 enabled 3 disabled	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.22

This table contains the configuration information of each
configured outbound SFPS switch port.  If SFPS is not
configured on a port, than an entry will not exist.

sfpsOutPortConfigEntry row .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1

Each entry specifies the SFPS configuration for the SFPS
outbound switch port for which the entry exists.

Indexes

sfpsOutPortConfigPort

Column	Syntax	OID
sfpsOutPortConfigPortmandatory The primary index to the SFPS in port table. This identifies the outbound SFPS switch port for which the entry exists.	SfpsSwitchPort	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.1
sfpsOutPortConfigAdminStatusmandatory Sets the administrative state of the SFPS outbound switch port for which the entry exists.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled 4 loopback	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2
sfpsOutPortConfigOperStatusmandatory Indicates the current operating condition of the SFPS on the outbound switch port for which this entry exists.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable 6 invalid-config 7 testing	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3
sfpsOutPortConfigOperTimemandatory Indicates the elapsed time, in hundredths of a second, that sfpsOutPortOperStatus has been in its current operational state on the SFPS outbound switch port for which this entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.4
sfpsOutPortConfigTypemandatory Sets the type of port access attribute for the outbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk por…	Enumerationr/w Enumerated Values: 1 other 2 access-port 3 network-port 4 host-mgmt-port 5 host-ctl-port 6 unknown 7 going-to-access 8 hybrid-port 9 stand-by 10 network-only 11 accessOnly 12 raPrimary 13 standbyFCLConflict 14 standbyLoopedPort 15 standbyVersionConflict 16 standbyRANonPrimary 17 flood 18 uplinkFlood 19 downlinkFlood 20 unknown-ra-standby	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5
sfpsOutPortConfigReservedBWmandatory Sets the amount of Bandwidth that is reserved for the outbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given to another port if unused.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.6
sfpsOutPortConfigAllocBWmandatory Sets the amount of Bandwidth that is allocated for the outbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.7
sfpsOutPortConfigQoSmandatory Sets the desired QoS service class for the outbound SFPS port for which this entry exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.8
sfpsOutPortConfigQSizemandatory Indicates the maximum outbound queue size for this port. Size is indicated in packets (packet descriptors).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.9
sfpsOutPortConfigQLenmandatory Indicates the actual outbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current depth of queue.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.10
sfpsOutPortConfigSwitchIdmandatory This entry is id of the port.	OctetString	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.11
sfpsOutPortConfigMediaTypemandatory	Enumeration Enumerated Values: 1 ethernet 2 fddi 3 atm-lec 4 token-ring 5 wan 6 inb 7 hcp 8 hdp 9 atm-encap 10 atm-pvc 11 unknown 12 atm-forum-lec 13 atm-forum-pvc 14 atm-forum-svc	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.12
sfpsOutPortConfigFrontPanelPortmandatory	SfpsSwitchPort	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.13
sfpsOutPortConfigLinkStatusmandatory The link status of this port.	Enumeration Enumerated Values: 1 other 2 linkUp 3 linkDown 4 linkNA	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14
sfpsOutPortConfigLinkStateAgemandatory Number of time ticks that link has been in this state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.15
sfpsOutPortConfigRouterPortmandatory Specifies whether this port is a router port.	Enumeration Enumerated Values: 1 other 2 router-port 3 no-router	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.16
sfpsOutPortConfigSlotNumbermandatory Slot number in the chassis.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.17
sfpsOutPortConfigMib2PortIdmandatory Mib2 Port id	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.18

This table contains the packet and byte counters for each
inbound SFPS switch port.

sfpsInPortStatsEntry row .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1

Specifies the SFPS packet and byte counters for the
inbound SFPS switch port for which this entry exists.

Indexes

sfpsInPortStatsPort

Column	Syntax	OID
sfpsInPortStatsPortmandatory The primary index to the SFPS port table. This identifies the SFPS inbound switch port for which the entry exists.	SfpsSwitchPort	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.1
sfpsInPortStatsAdminStatusmandatory Sets the administrative state of the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.2
sfpsInPortStatsResetmandatory Resets the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.3
sfpsInPortStatsOperTimemandatory Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the inbound SFPS switch port for which this entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.4
sfpsInPortStatsPktsmandatory Indicates the total number of SFPS packets that have been received, during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.5
sfpsInPortStatsDiscardPktsmandatory Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.6
sfpsInPortStatsBytesmandatory Indicates the total number of SFPS bytes that have been received, during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.7
sfpsInPortStatsDiscardBytesmandatory Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.8
sfpsInPortStatsQOverflowsmandatory Indicates the total number of queue overflow conditions have been experienced for the inbound SFPS switch port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.9
sfpsInPortStatsLinkUpsmandatory The number of link ups that this port has seen.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.10
sfpsInPortStatsLinkDownsmandatory The number of link downs that this port has seen.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.11

This table contains the packet and byte counters for each
outbound SFPS switch port.

sfpsOutPortStatsEntry row .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1

Specifies the SFPS packet and byte counters for the
outbound SFPS switch port for which this entry exists.

Indexes

sfpsOutPortStatsPort

Column	Syntax	OID
sfpsOutPortStatsPortmandatory The primary index to the SFPS port table. This identifies the SFPS outbound switch port for which the entry exists.	SfpsSwitchPort	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.1
sfpsOutPortStatsAdminStatusmandatory Sets the administrative state of the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.2
sfpsOutPortStatsResetmandatory Resets the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.3
sfpsOutPortStatsOperTimemandatory Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the outbound SFPS switch port for which this entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.4
sfpsOutPortStatsPktsmandatory Indicates the total number of SFPS packets that have been received, during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.5
sfpsOutPortStatsDiscardPktsmandatory Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exists	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.6
sfpsOutPortStatsBytesmandatory Indicates the total number of SFPS bytes that have been received, during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.7
sfpsOutPortStatsDiscardBytesmandatory Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.8
sfpsOutPortStatsQOverflowsmandatory Indicates the total number of queue overflow conditions have been experienced for the outbound SFPS switch port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.9
sfpsOutPortStatsLinkUpsmandatory The number of link ups that this port has seen.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.10
sfpsOutPortStatsLinkDownsmandatory The number of link downs that this port has seen.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.11