CTRON-SFPS-BASE-MIB Table View

This table contains all Call Processors registered with the
CPResources Table and is indexed by the Call Processor id.

sfpsCPResourcesTableEntry row .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1

Each entry contains information pertaining to a Call Processor.

Indexes

sfpsCPResourcesTableId

Column	Syntax	OID
sfpsCPResourcesTableIdmandatory Call Processor id used to index into the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.1
sfpsCPResourcesTableNamemandatory The name of the associated Call Processor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.2
sfpsCPResourcesTableOperStatusmandatory Operational state of entry.	Enumeration Enumerated Values: 1 kStatusRunning 2 kStatusHalted 3 kStatusPending 4 kStatusFaulted 5 kStatusNotStarted	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.3
sfpsCPResourcesTableAdminStatusmandatory This value represents the current administration status of the associated Call Processor. When enabled(3) the Call Processor is still allowed to call process packets. When this value is disabled(2) the ca…	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.4
sfpsCPResourcesTableStateTimemandatory The last time that this Call Processor has changed states.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.5
sfpsCPResourcesTablePtsInmandatory The number of packets that have been sent to this Call Processor to be handled.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.6
sfpsCPResourcesTablePtsUsedmandatory The number of packets that have been sent to this Call Processor and accepted for the purpose of processing.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.7
sfpsCPResourcesTablePolicyFloodmandatory Number of packets flooded due to Policy.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.8
sfpsCPResourcesResolveFloodmandatory Number of packets flooded due to not able to Resolve.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.9
sfpsCPResourcesConnectOKmandatory Number of packets that caused a successful connect.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.10
sfpsCPResourcesDuplicatemandatory Number of packets that were duplicates of an existing call.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.11
sfpsCPResourcesDiscoverOnlymandatory Number of packets that the switch only discovered information.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.12
sfpsCPResourcesDiscoverErrormandatory Number of packets that the switch could not discover information. Something was wrong with the packet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.13
sfpsCPResourcesResolveFailmandatory Number of packets which caused the Resolve to fail. The fail is due to no vlan information was returned.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.14
sfpsCPResourcesResolveErrormandatory Number of packets which caused the Resolve to return an error. An error could be caused by a bad packet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.15
sfpsCPResourcesPolicyFailmandatory Number of packets which caused the Policy to fail. The fail is caused because the switch has no information on the vlan(s) returned by Resolve.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.16
sfpsCPResourcesPolicyErrormandatory Number of packets which caused the Policy to return an error. An error could be caused by a bad packet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.17
sfpsCPResourcesConnectFailmandatory Number of packets that caused the Connect to fail.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.18
sfpsCPResourcesConnectFloodmandatory Number of packets that caused the Connect to flood.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.19
sfpsCPResourcesConnectErrormandatory Number of packets that caused the Connect to return an error.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.20
sfpsCPResourcesConfigTimemandatory Number of time ticks since the last configuration change.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.21
sfpsCPResourcesNeedFloodmandatory Set to enabled(1)/disabled(0) if the BaseNeedFlood attribute is desired. If disabled, then an attempt to resolve is performed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.22
sfpsCPResourcesNeedResolvemandatory Set to enabled(1)/disabled(0) if the Resoolve attribute is desired.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.23
sfpsCPResourcesNeedDiscovermandatory Set to enabled(1)/disabled(0) if the Discover attribute is desired.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.24
sfpsCPResourcesDiscoverAllmandatory Set to enabled(1)/disabled(0) if the DiscoverAll attribute is desired.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.25
sfpsCPResourcesNeedProxyOutmandatory Set to enabled(1)/disabled(0) if the Proxy Forward attribute is desired.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.26
sfpsCPResourcesNeedProxyInmandatory Set to enabled(1)/disabled(0) if the Proxy Back attribute is desired.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.27
sfpsCPResourcesNeedFiltermandatory Set to enabled(1)/disabled(0) if the Filter attribute is desired.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.28
sfpsCPResourcesAcceptRatemandatory The number of packets per second that have been sent to this Call Processor to be handled and accepted for processing.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.29
sfpsCPResourcesTotalRatemandatory The number of packets per second that have been sent to this Call Processor to be handled.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.30
sfpsCPResourcesSingleFloodmandatory Number of packets that were unicast (single) flooded.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.34
sfpsCPResourcesNeedValidNetmandatory Number of packets that were unicast (single) flooded.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.35
sfpsCPResourcesInvalidNetDropsmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.36
sfpsCPResourcesPersistMaskmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.37

This table gives facility semantics to call processing.

sfpsServiceCenterFacilityEntry row .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1

Each entry contains the configuration of the Facility Entry.

Indexes

sfpsServiceCenterFacilityHashLeaf

Column	Syntax	OID
sfpsServiceCenterFacilityHashLeafmandatory Server hash, part of instance key.	HexInteger	.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.1
sfpsServiceCenterFacilityMetricmandatory Defines order servers are called low to high.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.2
sfpsServiceCenterFacilityNamemandatory Server name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.3
sfpsServiceCenterFacilityOperStatusmandatory Operational state of entry.	Enumeration Enumerated Values: 1 kStatusRunning 2 kStatusHalted 3 kStatusPending 4 kStatusFaulted 5 kStatusNotStarted	.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.4
sfpsServiceCenterFacilityAdminStatusmandatory Administrative State of Entry.	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.5
sfpsServiceCenterFacilityStatusTimemandatory Time Tick of last operStatus change.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.6
sfpsServiceCenterFacilityRequestsmandatory Requests made to server.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.7
sfpsServiceCenterFacilityReplymandatory GOOD replies by server.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.8

Cabletron Switch Protocol Control statistics

sfpsCSPControlTableEntry row .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1

Indexes

sfpsCSPControlTableIndex

Column	Syntax	OID
sfpsCSPControlTableIndexmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.1
sfpsCSPControlTableCSPTypemandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.2
sfpsCSPControlTableCSPNamemandatory	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.3
sfpsCSPControlTableAdminStatusmandatory	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.4
sfpsCSPControlTableSwitchToCallProcmandatory	Enumeration Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.5
sfpsCSPControlTablePktsProcessedmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.6
sfpsCSPControlTablePktRatemandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.7

The SourceBlocker table lists all nodes (MAC addresses) that
have been heard locally on the switch. Only a certain subset
(if any) of the nodes in this table are blocked.

sfpsBlockSourceEntry row .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1

Entry in the SourceBlocker table indexed by a counter.

Indexes

sfpsBlockSourceIndex

Column	Syntax	OID
sfpsBlockSourceIndexmandatory The index into the table	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.1
sfpsBlockSourceMACmandatory The MAC address of the node.	SfpsAddress Type Constraints: range: 6	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.2
sfpsBlockSourceElapTimeShortmandatory The elapsed time (seconds) in the current short-threshold period.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.3
sfpsBlockSourceNumCallsShortmandatory The number of packets seen from the node during the elapsed time for the short-threshold.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.4
sfpsBlockSourceElapTimeLongmandatory The elapsed time (seconds) in the current long-threshold period.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.5
sfpsBlockSourceNumCallLongmandatory The number of packets seen from the node during the elapsed time for the long-threshold.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.6
sfpsBlockSourceBlockFlagmandatory Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used to represent a node that would be in the …	Enumeration Enumerated Values: 1 blocked 2 wouldBeBlocked	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.7
sfpsBlockSourceUnBlockableFlagmandatory Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The default setting is blockable. Any node can be changed to unbl…	Enumeration Enumerated Values: 1 unblockable	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.8
sfpsBlockSourceFilterPresentmandatory Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic purposes. It is used internally so that only one filter con…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.9
sfpsBlockSourceNextmandatory If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.10
sfpsBlockSourceBlocksOnlyIndexmandatory Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked flag' is set, this value represents the index into the BlockSourceOnly table. If the 'unblocka…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.11

The format of the BlockSourceOnly Table is exactly the same as the
SourceBlocker Table. The only difference is that the entries in
this table are only a subset of the entries in the SourceBlocker
Table. Only the entries that have a BLOCKFLAG set to 'blocked' or
'would-be-blocked' will reside in this table.

sfpsBlockSourceOnlyEntry row .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1

Entry in the BlockSourceOnly table indexed by a counter.

Indexes

sfpsBlockSourceOnlyIndex

Column	Syntax	OID
sfpsBlockSourceOnlyIndexmandatory The index into the table	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.1
sfpsBlockSourceOnlyMACmandatory The MAC address of the node.	SfpsAddress Type Constraints: range: 6	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.2
sfpsBlockSourceOnlyElapTimeShortmandatory The elapsed time (seconds) in the current short-threshold period.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.3
sfpsBlockSourceOnlyNumCallsShortmandatory The number of packets seen from the node during the elapsed time for the short-threshold.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.4
sfpsBlockSourceOnlyElapTimeLongmandatory The elapsed time (seconds) in the current long-threshold period.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.5
sfpsBlockSourceOnlyNumCallLongmandatory The number of packets seen from the node during the elapsed time for the long-threshold.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.6
sfpsBlockSourceOnlyBlockFlagmandatory Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used to represent a node that would be in the …	Enumeration Enumerated Values: 1 blocked 2 wouldBeBlocked	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.7
sfpsBlockSourceOnlyUnBlockableFlagmandatory Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The default setting is blockable. Any node can be changed to unbl…	Enumeration Enumerated Values: 1 unblockable	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.8
sfpsBlockSourceOnlyFilterPresentmandatory Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic purposes. It is used internally so that only one filter con…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.9
sfpsBlockSourceOnlyNextmandatory If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.10
sfpsBlockSourceOnlyBlocksOnlyIndexmandatory Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked' flag is set, this value represents the index into the BlockSourceOnly table. If the 'unblocka…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.11

The SourceBlock API allows for administratively selecting a port and
flagging it as 'unblockable'. The BlockSourcePort table shows which
ports are set to 'unblockable' and which ones remain set to the default
'blockable' setting.

sfpsBlockSourcePortEntry row .1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1

Entry into the BlockSourcePort Table

Indexes

sfpsBlockSourcePortPort

Column	Syntax	OID
sfpsBlockSourcePortPortmandatory This is the instance part of the table. There will be as many instances as there are logical ports in the device. The attributes represented in subsequent leaves all pertain to this port instance.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.1
sfpsBlockSourcePortBlockabilitymandatory This leaf contains either 0-blockable or 1-unblockable, depending on whether nodes on this port are allowed to be blocked or not.	Enumeration Enumerated Values: 1 unblockable	.1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.2

The format of the UnblockableOnly Table is exactly the same as the
SourceBlocker Table. The only difference is that the entries in this
table are only a subset of the entries in the SourceBlocker Table. 
Only the entries that have an UNBLOCKABLEFLAG set to 'unblockable'
will show up in this table.

sfpsBlockSourceExcludeEntry row .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1

Entry in the BlockSourceOnly table indexed by a counter.

Indexes

sfpsBlockSourceExcludeIndex

Column	Syntax	OID
sfpsBlockSourceExcludeIndexmandatory The index into the table	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.1
sfpsBlockSourceExcludeMACmandatory The MAC address of the node.	SfpsAddress Type Constraints: range: 6	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.2
sfpsBlockSourceExcludeElapTimeShortmandatory The elapsed time (seconds) in the current short-threshold period.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.3
sfpsBlockSourceExcludeNumCallsShortmandatory The number of packets seen from the node during the elapsed time for the short-threshold	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.4
sfpsBlockSourceExcludeElapTimeLongmandatory The elapsed time (seconds) in the current long-threshold period	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.5
sfpsBlockSourceExcludeNumCallLongmandatory The number of packets seen from the node during the elapsed time for the long-threshold.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.6
sfpsBlockSourceExcludeBlockFlagmandatory Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used to represent a node that would be in the …	Enumeration Enumerated Values: 1 blocked 2 wouldBeBlocked	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.7
sfpsBlockSourceExcludeUnBlockableFlagmandatory Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The default setting is blockable. Any node can be changed to unbl…	Enumeration Enumerated Values: 1 unblockable	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.8
sfpsBlockSourceExcludeFilterPresentmandatory Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic purposes. It is used internally so that only one filter con…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.9
sfpsBlockSourceExcludeNextmandatory If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.10
sfpsBlockSourceExcludeBlockSourceOnlyIndexmandatory Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked' flag is set, this value represents the index into the BlockSourceOnly table. If the 'unblocka…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.11