CTRON-FDDI-FNB-MIB Table View

This table specifies the physical resources
associated with the FNB and general FNB operation for a 
particular module in a particular slot.

ctFDDIResourceEntry row .1.3.6.1.4.1.52.4.1.2.5.1.1.1.1

Defines a specific physical resource entry

Indexes

ctFDDIResourceSlotID ctFDDIResourceID

Column	Syntax	OID
ctFDDIResourceSlotIDmandatory A specific instance of a slot as defined by chSlotID as defined in the chassis MIB.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.5.1.1.1.1.1
ctFDDIResourceIDmandatory A unique index that defines a specific physcial resource for which this relationship exists. The value of this is as defined by chResourceID in the chassis MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.1.1.1.2
ctFDDIResourceTypemandatory Defines the type of resource. This is the same value as chResourceType in the chassis MIB.	ObjectIdentifier	.1.3.6.1.4.1.52.4.1.2.5.1.1.1.1.3
ctFDDIResourceNumbInstancemandatory This object defines the number of instances of a physical resource. Specific resource instances are physically located from top-to-bottom on a particular module. If there are multiple 'columns' of a res…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.1.1.1.4

This table describes all possible capabilities/configurations
for all non-muxed FDDI configurations within the chassis.

ctFDDINonMuxCapEntry row .1.3.6.1.4.1.52.4.1.2.5.1.2.1.1

Describes a particular capability/configuration entry.

Indexes

ctFDDINMSlot ctFDDINMConfigID

Column	Syntax	OID
ctFDDINMSlotmandatory The slot within the chassis for which this configuration information is defined.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.52.4.1.2.5.1.2.1.1.1
ctFDDINMConfigIDmandatory The instance of a particular configuration.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.1.1.2
ctFDDINMConfigmandatory This object defines a specific valid connection configuration. It will specify the connection state of all resource instances. If an instance of a resource is not specified, then it is disconnected. Ea…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.5.1.2.1.1.3
ctFDDINMConfigDescmandatory This object contains a textual description of a valid connection configuration. This is a more user-friendly representation of the configuration than the ctFDDINMConfig object.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.5.1.2.1.1.4

This table describes the currently enabled configuration
for each module.

ctFDDINonMuxCapEnableEntry row .1.3.6.1.4.1.52.4.1.2.5.1.2.2.1

Describes a specific configuration enable entry.

Indexes

ctFDDINMEnableSlot

Column	Syntax	OID
ctFDDINMEnableSlotmandatory A specific slot for which this configuration enable pertains.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.2.1.1
ctFDDINMCapEnablemandatory A specific configuration that is enabled. Enabling a configuration is done by writing the value of ctFDDINMConfigID for a specific configuration to this object. This object, when read, w…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.2.1.2

This table defines specific information for each defined
FDDI/FNB connection.  This maps the third sub identifier 
of ctFDDINMConfig to a particular SMT and MAC instance in
the 1512 FDDI MIB.

ctFDDINonMuxConnectionEntry row .1.3.6.1.4.1.52.4.1.2.5.1.2.3.1

Defines a specific configuration connection entry.

Indexes

ctFDDINMConnectionSlot ctFDDINMConnectionID

Column	Syntax	OID
ctFDDINMConnectionSlotmandatory A specific slot for which this connection entry is defined.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.1
ctFDDINMConnectionIDmandatory Describes a specific connection identifier. Valid connection identifiers are defined by the third sub-identifier in ctFDDINMConfig as identified by ctFDDINMCapEnable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.2
ctFDDINMSMTmandatory A specific instance of SMT for which this entry pertains.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.3
ctFDDINMMACmandatory A specific MAC that this connection entry pertains.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.4
ctFDDINMBytesmandatory The bandwidth utilization in bytes per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.5
ctFDDINMFramesmandatory The bandwidth utilization in frames per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.6

This table describs the number of interfaces defined by
each non multiplexing FDDI FNB module.

ctFDDINonMuxInterfaceEntry row .1.3.6.1.4.1.52.4.1.2.5.1.2.4.1

A specfic non multiplexing module interface definition.

Indexes

ctFDDINMInterSlot

Column	Syntax	OID
ctFDDINMInterSlotmandatory A specific slot for which this inteface entry is defined.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.4.1.1
ctFDDINMNumbInterfacesmandatory The number of interfaces defined on this particular module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.2.4.1.2

This table describes all possible configuration/capabilities
defined for a FDDI multiplexing module.

ctFDDIMuxCapEntry row .1.3.6.1.4.1.52.4.1.2.5.1.3.1.1

Describes a specfic FDDI multiplexor capability/configuration
entry.

Indexes

ctFDDIMuxSlot ctFDDIMuxConfig

Column	Syntax	OID
ctFDDIMuxSlotmandatory Defines the slot within the chassis for which this multiplexed capability/configuration entry pertains.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.52.4.1.2.5.1.3.1.1.1
ctFDDIMuxConfigIDmandatory The instance of a particular configuration.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.3.1.1.2
ctFDDIMuxConfigmandatory This object defines a specific valid connection configuration. It will specify the connection state of all resource instances. If an instance of a resource is not specified, then it is disconnected. Eac…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.5.1.3.1.1.3
ctFDDIMuxConfigDescmandatory This object contains a textual description of a valid connection configuration. This is a more user-friendly representation of the configuration than the ctFDDIMuxConfig object.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.5.1.3.1.1.4

This table describes the currently enabled configuration
for each module.

ctFDDIMuxCapEnableEntry row .1.3.6.1.4.1.52.4.1.2.5.1.3.2.1

Describes a specific configuration enable entry.

Indexes

ctFDDIMuxEnableSlot

Column	Syntax	OID
ctFDDIMuxEnableSlotmandatory A specific slot for which this configuration enable pertains.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.52.4.1.2.5.1.3.2.1.1
ctFDDIMuxCapEnablemandatory A specific instance of the configuration that is enabled. Setting this object with a specific value of ctFDDIMuxConfigID enabled that configuration. A request of the value of this object will return the …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.3.2.1.2
ctFDDIMuxMasterPortAssignmentChangemandatory Depicts the number of changes to the master port to multiplexor output mapping.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.5.1.3.2.1.3

Describes the multiplexor outputs for each of the
FNB multiplexor modules.  This maps the multiplexor output
to a specific instance of MAC and SMT in the FDDI MIB.

ctFDDIMuxOutEntry row .1.3.6.1.4.1.52.4.1.2.5.1.3.3.1

Describes a particular multiplexor output.

Indexes

ctFDDIMuxOutSlot ctFDDIMuxOutID

Column	Syntax	OID
ctFDDIMuxOutSlotmandatory The given slot for which this multiplexor output information pertains.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.1
ctFDDIMuxOutIDmandatory The specific instance of the multiplexor output. Instances of this object are used by the values of ctFDDIMuxConfig.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.2
ctFDDIMuxOutMACIndexmandatory The MAC instance of this multiplexor output. If this this object has a value greater than 0, then this value is the same as fddimibMACIndex. If this object has the value of 0, the given mux-out does not have a MAC.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.3
ctFDDIMuxOutSMTIndexmandatory Identifies the instance of SMT as defined within the FDDI MIB.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.4
ctFDDIMuxBytesmandatory The bandwidth utilization in bytes per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.5
ctFDDIMuxFramesmandatory The bandwidth utilization in frames per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.6

A list of entries that define master ports as they are
defined for the given multiplexed FDDI connection.

ctFDDIMuxMasterPortEntry row .1.3.6.1.4.1.52.4.1.2.5.1.3.4.1

A specific FDDI-FNB multiplexed master port definition.

Indexes

ctFDDIMuxMasterPortSlotID ctFDDIMuxMasterPortID

Column	Syntax	OID
ctFDDIMuxMasterPortSlotIDmandatory A specific instance of a slot as defined by chSlotID.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.5.1.3.4.1.1
ctFDDIMuxMasterPortIDmandatory A unique identifier for this specific master port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.5.1.3.4.1.2
ctFDDIMuxMasterPortAssignmentmandatory Provides the masterport to multiplexor output mapping. This is as defined by ctFDDIMuxOutMacAssignment.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.3.4.1.3
ctFDDIMuxMasterPortIndexmandatory Defines a specific port within the FDDI MIBs fddimibPORTTable.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.5.1.3.4.1.4

This table describes the adminstrative control over each
of the FNB serial control modules.

ctFDDISerialConfigEntry row .1.3.6.1.4.1.52.4.1.2.5.1.4.2.1

Describes the controls over a single FNB serial control
entry.

Indexes

ctFDDISerialSlotID

Column	Syntax	OID
ctFDDISerialSlotIDmandatory Defines the slot that this FNB serial control module is in. This is an instance of chSlotID as defined in the chassis MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.4.2.1.1
ctFDDISerialAdminStatusmandatory Describes the adminstrative desired state for this FNB serial control module. insertFNB1(1) - The serial controlled module should be inserted into FNB-1 and bypass FNB-2. …	Enumerationr/w Enumerated Values: 1 insertFNB1 2 insertFNB2 3 insertFNB1FNB2 4 bypass 5 hwControlFNB1 6 hwControlFNB2 7 hwControl	.1.3.6.1.4.1.52.4.1.2.5.1.4.2.1.2
ctFDDISerialOperStatusmandatory Describes the operational status of this FDDI serial controlled module. insertFNB1(1) - The serial controlled module is inserted into FNB-1 and bypassed from FNB-2. …	Enumeration Enumerated Values: 1 insertFNB1 2 insertFNB2 3 insertFNB1FNB2 4 bypass	.1.3.6.1.4.1.52.4.1.2.5.1.4.2.1.3

This table describes the FPIMs that are on the front panel of
each FDDI serial control module, if that module supports FPIMs.

ctFDDIModuleFPIMEntry row .1.3.6.1.4.1.52.4.1.2.5.1.4.3.1

Describes a single FDDI FPIM on a module.

Indexes

ctFddiFPIMSlotID ctFddiFPIM

Column	Syntax	OID
ctFddiFPIMSlotIDmandatory Defines the slot in which this module exists. This is an instance of chSlotID as found in the chassis MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.4.3.1.1
ctFddiFPIMmandatory Defines the instance of the port for which this definition is made. Ports are physically located from top-to-bottom on a particular module. If there are multiple 'columns' of ports from the top to the bottom, then the…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.5.1.4.3.1.2
ctFddiFPIMStatusmandatory Describes the link status of the given FPIM. A value of link(1) states that a link is present. A value of noLink(2) states that no link is present. A value of notSupported(3)…	Enumeration Enumerated Values: 1 link 2 noLink 3 notSupported	.1.3.6.1.4.1.52.4.1.2.5.1.4.3.1.4
ctFddiFPIMTypemandatory Describes the type of FPIM as found in ctron-oids.	ObjectIdentifier	.1.3.6.1.4.1.52.4.1.2.5.1.4.3.1.5