CTELS100-NG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
21

els100PortTable

table mandatory
.1.3.6.1.4.1.52.1011.2 · 1 row entry · 11 columns
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk els100PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTELS100-NG-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTELS100-NG-MIB::els100PortTable'
The port table.
els100PortEntry row .1.3.6.1.4.1.52.1011.2.1
An entry in the port table.
Indexes
Column Syntax OID
els100Portmandatory
The number of the port, from 1 to the number of ports on
the system.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.1011.2.1.1
The connection (link) status of the port, either up
(linked) or down (not linked).
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.52.1011.2.1.2
The duplex status of the port, either half duplex or
full duplex.
Enumerationr/w
Enumerated Values:
1half
2full
.1.3.6.1.4.1.52.1011.2.1.3
The number of frames received on the port and forwarded
to another port on the system module for processing.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.1011.2.1.4
The number of frames received where the destination is
on the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52.1011.2.1.5
A descriptive string of up to 60 characters used by the
network administrator to name the port.
OctetStringr/w
Constraints:
range: 0-60
.1.3.6.1.4.1.52.1011.2.1.6
The enable status of the port, either enable or disable.
Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.52.1011.2.1.7
The speed the port is operating at: 10Mbps, or
100Mbps, or 1000Mbps.
Enumerationr/w
Enumerated Values:
1tenMbps
2oneHundredMbps
3oneThousandMbps
.1.3.6.1.4.1.52.1011.2.1.8
The auto-negotiation status of the port, either enable
or disable. When in the enable (2) state, the port will
automatically configure its duplex and speed operation.
Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.52.1011.2.1.9
The state of flow control operation of the port, either
enable or disable.
Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.52.1011.2.1.10
Port physical interface type.
Enumeration
Enumerated Values:
1unknown
2ieee10BaseT
3ieee100BaseTx
4ieee100BaseFx-MM
5ieee100BaseFx-SM
6ieee1000BaseCx
7ieee1000BaseLx
8ieee1000BaseSx
9ieee1000BaseT
10ieee1000BaseX
.1.3.6.1.4.1.52.1011.2.1.11

els100SwitchVlanConfigTable

table mandatory
.1.3.6.1.4.1.52.1011.3.13 · 1 row entry · 5 columns
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk els100SwitchVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTELS100-NG-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTELS100-NG-MIB::els100SwitchVlanConfigTable'
The VLAN configuration table.
els100SwitchVlanEntry row .1.3.6.1.4.1.52.1011.3.13.1
An entry in the VLAN configuration table.
Column Syntax OID
The number of the VLAN, from 1 to the number of VLAN's
supported on the system.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.1011.3.13.1.1
A descriptive string of up to 60 characters used by the
network administrator to name the VLAN.
OctetStringr/w
Constraints:
range: 0-60
.1.3.6.1.4.1.52.1011.3.13.1.2
The set of ports in the VLAN. For systems supporting
tagged VLAN's, these are the ports to which packets
on the VLAN are sent untagged. Each octet within the
value of this object specifies a set of eight ports,
with…
OctetStringr/w .1.3.6.1.4.1.52.1011.3.13.1.3
The set of ports defined to be on other VLAN's to which
tagged packets destined for this specific VLAN should
also be sent. Thus, this variable defines ports on the
system that reach stations downstream which are on t…
OctetStringr/w .1.3.6.1.4.1.52.1011.3.13.1.4
Control variable used to enable or disable the operation
of the associated VLAN in the system.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.52.1011.3.13.1.5

els100SwitchVlanPortTable

table mandatory
.1.3.6.1.4.1.52.1011.3.14 · 1 row entry · 3 columns
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk els100SwitchVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTELS100-NG-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTELS100-NG-MIB::els100SwitchVlanPortTable'
The VLAN port configuration table.
els100SwitchVlanPortEntry row .1.3.6.1.4.1.52.1011.3.14.1
An entry in the VLAN port configuration table.
Column Syntax OID
The number of the port, from 1 to number of ports
in the system.
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.52.1011.3.14.1.1
The port's VLAN ID. For tagged VLAN's, this variable
defines a 12 bit port VLAN ID (PVID) used as the
identifier of the VLAN in the packet tag.
Integer32r/w
Constraints:
range: 1-4095
.1.3.6.1.4.1.52.1011.3.14.1.2
For tagged VLAN's, the VLAN port type, either hybrid or
access. Hybrid ports allow both tagged and untagged
packets to enter the switch. Access ports only accept
untagged packets.
Enumerationr/w
Enumerated Values:
1hybrid
2access
.1.3.6.1.4.1.52.1011.3.14.1.3
.1.3.6.1.4.1.52.1011.3.17 · 1 row entry · 2 columns
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk els100SwitchPriorityPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTELS100-NG-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTELS100-NG-MIB::els100SwitchPriorityPortTable'
The priority port table.
els100SwitchPriorityPortEntry row .1.3.6.1.4.1.52.1011.3.17.1
An entry in the port priority table.
Column Syntax OID
The port number, from 1 to number of ports in the
system.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.1011.3.17.1.1
The port priority level assigned to untagged
traffic entering the associated port. This variable
can have a value in the range (0...7). This value is
compared to the value of the els100SwitchPriorityThreshold
variable …
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52.1011.3.17.1.2