CPQNUNIF-MIB Table View

This table contains a list of all the MIB modules actively supported
by a unit's agent.  This includes any standard RFC and Compaq
enterprise MIBs.

cpqnMibModuleEntry row .1.3.6.1.4.1.232.121.1.1.1

There is one entry defined for each separate MIB module the agent
supports.

Indexes

cpqnMibModuleIndex

Column	Syntax	OID
cpqnMibModuleIndexmandatory The index for this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.1.1.1.1
cpqnMibModuleDescrmandatory This is a short textual description of the MIB module for this entry. Examples could be RFC 1213 MIB-II or Compaq Unified MIB.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.232.121.1.1.1.2
cpqnMibModuleOidmandatory This is the OID representing the base node of the MIB for this entry. The base node of a MIB is defined here as the first MIB node that is not defined in another MIB. For example, the base node OID for RMON is MIB-II.R…	ObjectIdentifier	.1.3.6.1.4.1.232.121.1.1.1.3

There is one entry in this table for each serial port on the unit.

cpqnSerialPortEntry row .1.3.6.1.4.1.232.121.2.3.1

This entry provides information and objects to control a serial port.

Indexes

cpqnSPortIndex

Column	Syntax	OID
cpqnSPortIndexmandatory The index of this row.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.2.3.1.1
cpqnSPortIfIndexmandatory This object indicates which entry in the MIB-II interface table this serial port corresponds to. If this value is zero (0), then this serial port DOES NOT have an associated MIB-II interface. This object will only be …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.2.3.1.2
cpqnSPortModemInitStringEnablemandatory DURABLE: If this object is enabled(1) then after a power up or reset the unit will transmit the modem init string out the primary serial port in order to initialize the modem. This will occur at the baud rate value of…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.232.121.2.3.1.3
cpqnSPortModemInitStringmandatory DURABLE: This object contains a Modem Initialization String which is used to configure a modem on this port to the desired mode. Refer to the unit-specific documentation for information on the factory setting for this…	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.232.121.2.3.1.4
cpqnSPortModemAutoNegotiateStatemandatory DURABLE: If enabled(1), the unit automatically detects the baud rate of incoming calls and will adjust the baud rate on this port to match. This is accomplished by watching for the connect indication strings from a mod…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.232.121.2.3.1.5
cpqnSPortBaudRatemandatory DURABLE: This is the current baud rate for the port. Its value must match a cpqnBaudRate entry in cpqnSupportBaudRateTable. Note that this value can automatically change if cpqnSPortModemAutoNegotiateState is set to …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.2.3.1.6

A table of supported baud rates for this unit.

cpqnSupportedBaudRateEntry row .1.3.6.1.4.1.232.121.2.4.1

There is one entry defined for each supported baud rate for each
serial port.

Indexes

cpqnBaudRatePortIndex cpqnBaudRateIndex

Column	Syntax	OID
cpqnBaudRatePortIndexmandatory The index into the cpqnSerialPortTable table identifying the port this entry applies to.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.2.4.1.1
cpqnBaudRateIndexmandatory The index of this row.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.2.4.1.2
cpqnBaudRatemandatory The supported baud rate for the port indexed by cpqnBaudRatePortIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.2.4.1.3

This table contains a list of hardware and/or software components
resident in the unit.

cpqnVersionEntry row .1.3.6.1.4.1.232.121.3.1.1

There is one entry defined for each hardware and/or software
component.

Indexes

cpqnVersionIndex

Column	Syntax	OID
cpqnVersionIndexmandatory The index into the version table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.3.1.1.1
cpqnVersionTypemandatory The component's type.	CpqnVersionType Type Values: 1 other 2 hardware 3 software	.1.3.6.1.4.1.232.121.3.1.1.2
cpqnVersionDescmandatory A brief description of the component. This object may be empty.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.232.121.3.1.1.3
cpqnVersionMajormandatory The MAJOR version number of the component. This is always a value between 0 and 255 and should be interpreted as a decimal number. An example is version 2.14 where 2 is the major version number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.3.1.1.4
cpqnVersionMinormandatory The MINOR version number of the component. This is always a value between 0 and 99 and should be interpreted as a two-digit decimal number. An example is version 2.01 where 1 is the minor version number. Another exam…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.3.1.1.5
cpqnVersionStepmandatory The STEP identifier for the associated component. This value indicates the level or class of the component, such as prototype, production, or beta.	CpqnVersionStep Type Values: 1 other 2 engineering 3 alpha 4 beta 5 prototype 6 pilot 7 pre-production 8 production 9 post-production 10 simple-revision	.1.3.6.1.4.1.232.121.3.1.1.6
cpqnVersionRevmandatory The REVISION of the step for the associated component. An example is version 1.00B3 where 3 is the revision number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.3.1.1.7
cpqnVersionSerialNumbermandatory The serial number of this component. The format of this object is dependent on the unit type. Refer to the unit-specific documentation for more information. This object is empty for components which do not have a ser…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.232.121.3.1.1.8
cpqnVersionUnitIdmandatory This is a number that uniquely identifies which unit in a collection of one or more units that this entry applies to. For example, this unit may be part of a stack, or a plug-in card in a chassis. For units that are n…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.3.1.1.9
cpqnVersionParentIndexmandatory A component represented by an entry in this table may be a sub-component of another entity or unit. In this case, the value of this object indicates this entry's parent entry in this table. For example, a plug-in upli…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.3.1.1.10

This table contains objects which control access to the agent over IP.
Access is restricted to only the hosts listed in this table.
          
If a station does not have read-write-allow-telnet(4) access to a unit,
then this table is not accessible, e.g. GET or SET messages accessing
this table from stations will have an authentication error returned.
GET NEXTs on this MIB from such stations will simply skip over this
table.
          
Care must be taken when modifying this table.  A network management
station can inadvertently modify this table so that it no longer
has read-write-allow-telnet(4) access.  If this occurs, then this table
can only be modified from another network management station with
write access, via telnet, or via a direct connection to the unit's
primary serial port.
          
Access to this unit via SNMP and Telnet can also be blocked if
all the entries in this table and the cpqnCommunityAccessIPXTable are
deleted.  In this case, this table can only be modified via a direct
connection via the primary serial port using the unit's user interface.
          
This table can be set to factory values using the user interface
accessed by Telnet or a direct connection to the unit's primary serial
port.  This table will also be set to factory values when cpqnUnitReset
is set to reset-to-factory-values(4).

cpqnCommAccessIPEntry row .1.3.6.1.4.1.232.121.4.2.1

There is one entry defined for each host-community pair.

Indexes

cpqnAclIPIndex

Column	Syntax	OID
cpqnAclIPIndexmandatory The index to this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.4.2.1.1
cpqnAclIPRowStatusmandatory DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row…	CpqnRowStatusr/w Type Values: 1 row-valid 2 row-invalid	.1.3.6.1.4.1.232.121.4.2.1.2
cpqnAclIPAddrMaskmandatory DURABLE: This mask is applied to the source address of received SNMP/IP messages. If the masked address matches cpqnAclIPAddrMatch and the community in the SNMP packet matches the community name in cpqnAclIPCommunity …	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.232.121.4.2.1.3
cpqnAclIPAddrMatchmandatory DURABLE: The Masked address must match this value.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.232.121.4.2.1.4
cpqnAclIPCommunitymandatory DURABLE: The community string that is required for any requests coming from this host. The default value for this object is 'public'.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.232.121.4.2.1.5
cpqnAclIPRightsmandatory DURABLE: This object controls the access granted to SNMP requests which match a mask/match and community name string. no-access(1) means that that address/community name pair has neither SNMP/IP nor Telnet access. re…	Enumerationr/w Enumerated Values: 1 no-access 2 read-only-prevent-telnet 3 read-only-allow-telnet 4 read-write-allow-telnet	.1.3.6.1.4.1.232.121.4.2.1.6

This table contains objects which control SNMP/IPX access to the agent.
Access is restricted to only the hosts listed in this table.
          
If a station does not have read-write(3) access to a unit,
then this table is not accessible,e.g. GET or SET messages accessing
this table from stations will have an authentication error returned.
GET NEXTs on this MIB from such stations will simply skip over this
table.
          
Care must be taken when modifying this table.  A network management
station can inadvertently modify this table so that it no longer
has read-write(3) access.  If this occurs, then this table
can only be modified from another network management station with
write access, via telnet, or via a direct connection to the unit's
primary serial port.
          
Access to this unit via SNMP and Telnet can also be blocked if
all the entries in this table and the cpqnCommunityAccessIPTable are
deleted.  In this case, this table can only be modified via a direct
connection via the primary serial port using the unit's user interface.
          
This table can be set to factory values using the user interface
accessed by Telnet or a direct connection to the unit's primary serial
port.  This table will also be set to factory values when cpqnUnitReset
is set to reset-to-factory-values(4).

cpqnCommAccessIPXEntry row .1.3.6.1.4.1.232.121.4.3.1

There is one entry defined for each host-community pair.

Indexes

cpqnAclIPXIndex

Column	Syntax	OID
cpqnAclIPXIndexmandatory The index to this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.4.3.1.1
cpqnAclIPXRowStatusmandatory DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row…	CpqnRowStatusr/w Type Values: 1 row-valid 2 row-invalid	.1.3.6.1.4.1.232.121.4.3.1.2
cpqnAclIPXAddrMaskmandatory DURABLE: This mask is applied to the source address of received SNMP messages. If the masked address matches cpqnAclIPXAddrMask and the community in the SNMP packet matches the community name in cpqnAclIPXCommunity fo…	IpxAddressr/w Type Constraints: range: 10	.1.3.6.1.4.1.232.121.4.3.1.3
cpqnAclIPXAddrMatchmandatory DURABLE: The Masked address must match this value.	IpxAddressr/w Type Constraints: range: 10	.1.3.6.1.4.1.232.121.4.3.1.4
cpqnAclIPXCommunitymandatory DURABLE: The community string that is required for any requests coming from this host. The default value for this object is 'public'.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.232.121.4.3.1.5
cpqnAclIPXRightsmandatory DURABLE: This object controls the access granted to SNMP/IPX requests which match a mask/match and community name string. no-access(1) means that that address/community name pair has no SNMP/IPX access. read-only(2) a…	Enumerationr/w Enumerated Values: 1 no-access 2 read-only-access 3 read-write-access	.1.3.6.1.4.1.232.121.4.3.1.6

A list of IP trap destination entries.

cpqnIPTrapDestEntry row .1.3.6.1.4.1.232.121.5.1.1

A destination entry which defines the IP address to which traps are sent
for a community.

Indexes

cpqnIPTrapDestIndex

Column	Syntax	OID
cpqnIPTrapDestIndexmandatory A value that uniquely identifies this IPTrapDestEntry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.5.1.1.1
cpqnIPTrapDestRowStatusmandatory DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row…	CpqnRowStatusr/w Type Values: 1 row-valid 2 row-invalid	.1.3.6.1.4.1.232.121.5.1.1.2
cpqnIPTrapDestCommunitymandatory DURABLE: A community name to which this destination IP address belongs.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.232.121.5.1.1.3
cpqnIPTrapDestAddressmandatory DURABLE: The IP address to send traps to on behalf of this entry.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.232.121.5.1.1.4

A list of IPX trap destination entries.

cpqnIPXTrapDestEntry row .1.3.6.1.4.1.232.121.5.2.1

A destination entry which defines the IPX address to which traps are
sent for a community.

Indexes

cpqnIPXTrapDestIndex

Column	Syntax	OID
cpqnIPXTrapDestIndexmandatory A value that uniquely identifies this IPXTrapDestEntry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.5.2.1.1
cpqnIPXTrapDestRowStatusmandatory DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row…	CpqnRowStatusr/w Type Values: 1 row-valid 2 row-invalid	.1.3.6.1.4.1.232.121.5.2.1.2
cpqnIPXTrapDestCommunitymandatory DURABLE: A community name to which this destination IPX address belongs.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.232.121.5.2.1.3
cpqnIPXTrapDestAddressmandatory DURABLE: The IPX address to send traps to on behalf of this entry. IPX traps are sent to the standard IPX SNMP socket number.	IpxAddressr/w Type Constraints: range: 10	.1.3.6.1.4.1.232.121.5.2.1.4

This table describes IP network information for each management agent
interface.  This could include all possible bridge groups and the SLIP
interface

cpqnIpNetworkEntry row .1.3.6.1.4.1.232.121.6.1.1

There is one entry for each agent interface which describes
the IP protocol information on that interface.

Indexes

cpqnIpIfIndex

Column	Syntax	OID
cpqnIpIfIndexmandatory This is the ifIndex value of an interface in the MIB-II interface table for which this table entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.6.1.1.1
cpqnIpPhysAddrmandatory The physical address of the management agent interface. This is usually an interfaces IEEE MAC Address. For IEEE MAC address, the value will be 6 bytes in network byte order. For interfaces which do not have such phy…	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.232.121.6.1.1.2
cpqnIpAddrmandatory DURABLE: The IP Address of this Agent interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.232.121.6.1.1.3
cpqnIpNetMaskmandatory DURABLE: The IP Subnet Mask of this Agent interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.232.121.6.1.1.4
cpqnIpRoutermandatory DURABLE: The IP Address of the next hop Router (default Gateway) used by this interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.232.121.6.1.1.5
cpqnIpFrameTypemandatory DURABLE: Except when booting up, an agent communicates over IP using a single frame type defining the type of network that the IP traffic is running on: Ethernet_II or IEEE 802.2_SNAP. When the agent is performing BO…	Enumerationr/w Enumerated Values: 1 not-applicable 2 ethernet-ii 3 ieee-802-2-snap	.1.3.6.1.4.1.232.121.6.1.1.6
cpqnIpAutoDiscoveryStatusmandatory DURABLE: This object allows a user to enable the unit to send out periodic ICMP Pings to ensure that the unit's IP Address is contained in the ARP cache of its default gateway (cpqnIpRouter, if any!). If the user sets…	Enumerationr/w Enumerated Values: 1 discover 2 do-not-discover	.1.3.6.1.4.1.232.121.6.1.1.7
cpqnIpPingPktRatemandatory DURABLE: This object determines the rate (in seconds) at which ICMP Pings are sent out by the unit to ensure that its IP Address remains in the ARP cache of the unit's default gateway (cpqnIpRouter). This object is us…	Integer32r/w Constraints: range: 55-65535	.1.3.6.1.4.1.232.121.6.1.1.8
cpqnIpInfoSavemandatory Setting this object allows the changes made to any of the settable objects in this table to be written into non-volatile memory. The changes will not take effect nor be written into non-volatile memory until this objec…	Enumerationr/w Enumerated Values: 1 ignore-changes 2 write-changes-to-nvram 3 values-changed 4 values-valid	.1.3.6.1.4.1.232.121.6.1.1.9

This table describes IPX network information for each agent
interface.

cpqnIpxNetworkEntry row .1.3.6.1.4.1.232.121.6.2.1

There is one entry for each agent interface which describes
the IPX protocol information on that interface.

Indexes

cpqnIpxIfIndex

Column	Syntax	OID
cpqnIpxIfIndexmandatory This is the ifIndex value of an interface in the MIB-II interface table for which this table entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.6.2.1.1
cpqnIpxPhysAddrmandatory The physical address of the management agent interface. This is usually an interfaces IEEE MAC Address. For IEEE MAC address, the value will be 6 bytes in network byte order. For interfaces which do not have such phy…	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.232.121.6.2.1.2
cpqnIpxFrameTypemandatory DURABLE: The frame type with which IPX communication originating from the unit will take place. The unit will respond to a packet using the same frame type as was used in the request. This frame type comes into effec…	Enumerationr/w Enumerated Values: 1 not-applicable 2 ethernet-ii 3 ethernet-802-3-raw 4 ieee-802-2 5 ieee-802-2-snap	.1.3.6.1.4.1.232.121.6.2.1.3
cpqnIpxNetworkNumbermandatory DURABLE: The IPX Network number for this interface. If this object is 00000000, then the unit has not yet determined the network number.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.232.121.6.2.1.4
cpqnIpxSAPBcastStatusmandatory DURABLE: The unit may generate IPX SAP broadcasts. This allows the unit to be auto-discovered. By setting this object to do-ipx-SAPs(1), the unit will generate SAP broadcasts at a rate of one every 60 seconds. By se…	Enumerationr/w Enumerated Values: 1 do-ipx-SAPs 2 no-ipx-SAPs	.1.3.6.1.4.1.232.121.6.2.1.5

A table of BOOTP configuration information for each management agent
interface.  This table controls the BOOTP behavior of the basic
booting system.  Other software components installed in a unit
may also do BOOTP.  This table does not control those components.

cpqnBootpEntry row .1.3.6.1.4.1.232.121.7.1.1

A list of BOOTP configuration information for each management agent
interface.

Indexes

cpqnBootpIfIndex

Column	Syntax	OID
cpqnBootpIfIndexmandatory This is the ifIndex value of an interface in the MIB-II interface table for which this table entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.121.7.1.1.1
cpqnBootpEnablemandatory DURABLE: This object allows the user to enable/disable generation of BOOTP requests on the interface specified by cpqnBootpIfIndex. BOOTP requests can be generated over the SNAP frame type, Ethernet-II frame type, or …	Enumerationr/w Enumerated Values: 1 disable-bootp 2 enable-bootp-ethernet-ii 3 enable-bootp-ieee-802-2-snap 4 enable-bootp-both	.1.3.6.1.4.1.232.121.7.1.1.2
cpqnBootpRetriesmandatory DURABLE: This determines the number of BOOTP requests that will be transmitted from the interface indicated by cpqnBootpIfIndex. This object is used in conjunction with the cpqnBootpRetryInterval object. If both frame…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.232.121.7.1.1.3
cpqnBootpRetryIntervalmandatory DURABLE: This object allows the user to set the time period (in seconds) between the transmission of BOOTP requests on the interface specified by cpqnBootpIfIndex. This object is used in conjunction with the cpqnBootp…	Integer32r/w Constraints: range: 5-255	.1.3.6.1.4.1.232.121.7.1.1.4
cpqnBootpServerIpAddrmandatory The IP address of the BOOTP Server that last responded on the interface indicated by cpqnBootpIfIndex. If no BOOTP server has responded, then this object will be '0.0.0.0'.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.232.121.7.1.1.5