CPQN54NN-MIB

Source file
CPQN54NN-MIB
Last revised
Not declared
Imported Objects
RFC-1212 OBJECT-TYPE (no object page)
RFC-1215 TRAP-TYPE (no object page)
RFC1155-SMI enterprises
RFC1213-MIB sysDescr sysUpTime
Objects (19)
.1.3.6.1.4.1.232
.1.3.6.1.4.1.232.111
.1.3.6.1.4.1.232.111.1
.1.3.6.1.4.1.232.111.1.1
.1.3.6.1.4.1.232.111.1.2
.1.3.6.1.4.1.232.111.2
.1.3.6.1.4.1.232.111.2.1
.1.3.6.1.4.1.232.111.2.1.1
.1.3.6.1.4.1.232.111.2.1.2
.1.3.6.1.4.1.232.111.2.1.3
.1.3.6.1.4.1.232.111.2.1.4
.1.3.6.1.4.1.232.111.2.1.5
.1.3.6.1.4.1.232.111.2.1.6
.1.3.6.1.4.1.232.111.3
.1.3.6.1.4.1.232.111.3.1
cpqSaveConfiguration mandatory r/w
Enumeration
.1.3.6.1.4.1.232.111.3.1.3
cpqSaveStatus mandatory
Enumeration
.1.3.6.1.4.1.232.111.3.1.4
Enumeration
.1.3.6.1.4.1.232.111.3.1.5
cpqConfigToUseOnReboot mandatory r/w
Enumeration
.1.3.6.1.4.1.232.111.3.1.6
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. RFC-1212rfc
  2. RFC-1215rfc
  3. RFC1155-SMIrfc
  4. SNMPv2-SMIrfc
  5. SNMPv2-TCrfc
  6. IANAifType-MIBrfc
  7. RFC1213-MIBrfc
  8. CPQN54NN-MIBhpselected
Notifications / Traps (8)
NameOIDDescription
.1.3.6.1.4.1.232.111.0.10
One or more sources of power to this agent has failed.
Presumably a redundant power-supply has taken over.
.1.3.6.1.4.1.232.111.0.11
One or more previously bad sources of power to this agent
has come back to life without causing an agent restart.
.1.3.6.1.4.1.232.111.0.12
Attached Redundant Power Supply device is indicating
an alarm condition.
.1.3.6.1.4.1.232.111.0.13
Attached Redundant Power Supply device is no longer
indicating an alarm condition.
.1.3.6.1.4.1.232.111.0.6
A overheat trap indicates that the on board
tempature sensor has reported a overheat
condition. System will shutdown until unit has
sufficiently cooled such that operation may begin
again. A cold start trap will be issued when
the unit has come back on line.
.1.3.6.1.4.1.232.111.0.7
A fan failed trap indicates one or more of the
cooling fans inside the device has failed. A
fanOK trap will be sent once the fan has attained
normal operation.
.1.3.6.1.4.1.232.111.0.8
A fan has transitioned out of a failure state and
is now operating correctly.
.1.3.6.1.4.1.232.111.0.9
A user attempted to login to console or by telnet but was refused
access due to incorrect username or password