CPIWF-R-MIB Table View

This table contains information on the configuration of the 
POTS ports on the CP-IWF in addition to the information 
contained in the ifTable about the physical interfaces to which 
the CP-IWF POTS ports are peering with currently.

cpIwfPotsPortEntry row .1.3.6.1.4.1.164.20.5.1.3.1

An entry in the cpIwfPotsPortTable that represents a single
POTS port.

Indexes

cpIwfPotsPortNumber

Column	Syntax	OID
cpIwfPotsPortNumber The POTS port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.3.1.1
cpIwfPotsPortPhysicalPort This has the value of the ifIndex of the ifEntry of the physical POTS port to which this CP-IWF POTS port is connected. The value of (0) has the special meaning that this POTS port is blocked and is not connected to any…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.3.1.2
cpIwfPotsPortChannelId The CID of the AAL2 connection transporting this port's traffic over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, this object should not be use for CID allocation and the …	Integer32r/w Constraints: range: 16-255	.1.3.6.1.4.1.164.20.5.1.3.1.3
cpIwfPotsPortTestMode The value of this object only applies if adminStatus in ifEntry is testing (3).	Enumerationr/w Enumerated Values: 1 none 2 codecLoopback 3 aal2Loopback	.1.3.6.1.4.1.164.20.5.1.3.1.4
cpIwfPotsPortSignalingMethod The signalling method to use for this user port. Default value loopStart	Enumerationr/w Enumerated Values: 1 loopStartNormalBattery 2 loopStartReverseBattery 3 groundStart	.1.3.6.1.4.1.164.20.5.1.3.1.5
cpIwfPotsPortRxBytesPerCell Selects the maximum number of payload bytes to be excepted in a cell in the receive direction. the available range is 10 to 44 Default value 44	Integer32r/w Constraints: range: 10-44	.1.3.6.1.4.1.164.20.5.1.3.1.6
cpIwfPotsPortTxBytesPerCell In AAL2, the maximum number of payload bytes that can be inserted in one cell is 44. Padding bytes can be inserted to fill the cell and transmit it immediately. Default value 44	Integer32r/w Constraints: range: 10-44	.1.3.6.1.4.1.164.20.5.1.3.1.7
cpIwfPotsPortContCheck Specifies the initial method used for a new connection to perform checks in the ATM network interface. The available selections are: off-two-way, on-source, on-sink, on-two-way, off-sink, off-source Default value 2	Enumerationr/w Enumerated Values: 2 off-two-way 3 on-source 4 on-sink 5 on-two-way 6 off-sink 7 off-source	.1.3.6.1.4.1.164.20.5.1.3.1.8
cpIwfPotsPortStatus Pots status - Free, Busy, faulty,under test	Enumeration Enumerated Values: 2 busy 3 idle 4 faulty 5 underTest	.1.3.6.1.4.1.164.20.5.1.3.1.9

This table contains information on the configuration of the 
ISDN BRI ports on the CP-IWF in addition to the information 
contained in the ifTable about the physical interfaces to which 
the CP-IWF ports are peering with currently.

cpIwfIsdnBriPortEntry row .1.3.6.1.4.1.164.20.5.1.4.1

An entry in the cpIwfIsdnBriPortTable that represents a single
ISDN BRI port.

Indexes

cpIwfIsdnBriPortNumber

Column	Syntax	OID
cpIwfIsdnBriPortNumber The ISDN BRI port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.4.1.1
cpIwfIsdnBriPortPhysicalPort This has the value of the ifIndex of the ifEntry of the physical ISDN BRI port to which this CP-IWF ISDN BRI port is connected. The value of (0) has the special meaning that this ISDN BRI port is blocked and is not conn…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.4.1.2
cpIwfIsdnBriPortChannelIdD The CID of the AAL2 connection transporting the D channel of this ISDN BRI port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, this object should not be use for CID al…	Integer32r/w Constraints: range: 16-255	.1.3.6.1.4.1.164.20.5.1.4.1.3
cpIwfIsdnBriPortChannelIdB1 The CID of the AAL2 connection transporting the B1 channel of this ISDN BRI port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, this object should not be use for CID a…	Integer32r/w Constraints: range: 16-255	.1.3.6.1.4.1.164.20.5.1.4.1.4
cpIwfIsdnBriPortChannelIdB2 The CID of the AAL2 connection transporting the B2 channel of this ISDN BRI port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, this object should not be use for CID a…	Integer32r/w Constraints: range: 16-255	.1.3.6.1.4.1.164.20.5.1.4.1.5
cpIwfIsdnBriPortRxBytesPerCell Selects the maximum number of payload bytes to be excepted in a cell in the receive direction. the available range is 10 to 44 Default value 44	Integer32r/w Constraints: range: 10-44	.1.3.6.1.4.1.164.20.5.1.4.1.6
cpIwfIsdnBriPortTxBytesPerCell In AAL2, the maximum number of payload bytes that can be inserted in one cell is 44. Padding bytes can be inserted to fill the cell and transmit it immediately. Default value 44	Integer32r/w Constraints: range: 10-44	.1.3.6.1.4.1.164.20.5.1.4.1.7
cpIwfIsdnBriPortContCheck Specifies the initial method used for a new connection to perform checks in the ATM network interface. The available selections are: off-two-way, on-source, on-sink, on-two-way, off-sink, off-source Default value 2	Enumerationr/w Enumerated Values: 2 off-two-way 3 on-source 4 on-sink 5 on-two-way 6 off-sink 7 off-source	.1.3.6.1.4.1.164.20.5.1.4.1.8
cpIwfIsdnBriPortEchoCanceler Echo Cancellation activation Default value = b1-On-B2-On	Enumerationr/w Enumerated Values: 1 notApplicable 2 b1-Off-B2-Off 3 b1-Off-B2-On 4 b1-On-B2-off 5 b1-On-B2-On	.1.3.6.1.4.1.164.20.5.1.4.1.9
cpIwfIsdnBriPortL1Status This object indicates the current state of Layer 1 of the ISDN port, according to definitions in ITU-T Recommendation I-430 11/95, paragraph 6.2	Enumeration Enumerated Values: 1 notApplicable 2 deactivated 3 accessActivated 4 accessDeactivated 5 losLofDeactivated 6 losLofActivated 7 lostSignal 8 lostFrame 9 deactivateST 10 activateST 11 sendInfo2 12 sendInfo4 13 frameSlip 14 loopActivated 15 loopNotStopped	.1.3.6.1.4.1.164.20.5.1.4.1.10
cpIwfIsdnBriPortDChRxPCMStatus This object indicates the state of the D Rx channel of the selected port	Enumeration Enumerated Values: 1 notApplicable 2 close 3 open	.1.3.6.1.4.1.164.20.5.1.4.1.11
cpIwfIsdnBriPortB1ChRxPCMStatus This object indicates the state of the B1 Rx channel of the selected port	Enumeration Enumerated Values: 1 notApplicable 2 close 3 open	.1.3.6.1.4.1.164.20.5.1.4.1.12
cpIwfIsdnBriPortB2ChRxPCMStatus This object indicates the state of the B2 Rx channel of the selected port	Enumeration Enumerated Values: 1 notApplicable 2 close 3 open	.1.3.6.1.4.1.164.20.5.1.4.1.13
cpIwfIsdnBriPortDChTxPCMStatus This object indicates the state of the D Tx channel of the selected port	Enumeration Enumerated Values: 1 notApplicable 2 close 3 open	.1.3.6.1.4.1.164.20.5.1.4.1.14
cpIwfIsdnBriPortB1ChTxPCMStatus This object indicates the state of the B1 Tx channel of the selected port	Enumeration Enumerated Values: 1 notApplicable 2 close 3 open	.1.3.6.1.4.1.164.20.5.1.4.1.15
cpIwfIsdnBriPortB2ChTxPCMStatus This object indicates the state of the B2 Tx channel of the selected port	Enumeration Enumerated Values: 1 notApplicable 2 close 3 open	.1.3.6.1.4.1.164.20.5.1.4.1.16

This table contains information on the configuration of the 
DS0 Bundles  on the CP-IWF in addition to the information 
contained in the ifTable about the physical interfaces to which 
the CP-IWF ports are peering with currently.

cpIwfDs0BundleEntry row .1.3.6.1.4.1.164.20.5.1.5.1

An entry in the cpIwfDs0BundleTable that represents a single
DS0 Bundle.

Indexes

cpIwfDs0BundleNumber

Column	Syntax	OID
cpIwfDs0BundleNumber The DS0 bundle port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.5.1.1
cpIwfDs0BundleIfIndex This has the value of the ifIndex of the ifEntry of the physical DS0 bundle port to which this CP-IWF DS0 bundle port is connected. The value of (0) has the special meaning that this DS0 bundle port is blocked and is n…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.5.1.2
cpIwfDs0BundleChannelId The CID of the AAL2 connection transporting this DS0 bundle port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, this object should not be use for CID allocation and the v…	Integer32r/w Constraints: range: 16-255	.1.3.6.1.4.1.164.20.5.1.5.1.3
cpIwfDs0BundleRxBytesPerCell Selects the maximum number of payload bytes to be excepted in a cell in the receive direction. the available range is 10 to 44 Default value 44	Integer32r/w Constraints: range: 10-44	.1.3.6.1.4.1.164.20.5.1.5.1.6
cpIwfDs0BundleTxBytesPerCell In AAL2, the maximum number of payload bytes that can be inserted in one cell is 44. Padding bytes can be inserted to fill the cell and transmit it immediately. Default value 44	Integer32r/w Constraints: range: 10-44	.1.3.6.1.4.1.164.20.5.1.5.1.7
cpIwfDs0BundleContCheck Specifies the initial method used for a new connection to perform checks in the ATM network interface. The available selections are: off-two-way, on-source, on-sink, on-two-way, off-sink, off-source Default value 2	Enumerationr/w Enumerated Values: 2 off-two-way 3 on-source 4 on-sink 5 on-two-way 6 off-sink 7 off-source	.1.3.6.1.4.1.164.20.5.1.5.1.8
cpIwfDs0BundleLineSignaling This object defines the line signal coding for CAS. It represents three parameters, by two octet (nibble per parameter Bit 7 = MSB, Bit 0 = LSB ) as follows: ONHOOK Code- MSB nibble, default value is 0101 (h'5) OFFHOOK…	OctetStringr/w	.1.3.6.1.4.1.164.20.5.1.5.1.9

This table is used to map a cadenced ringing type identifier to
an actual ringing cadence. The index to the table is the value of
the Cadenced-ringing type sub-element contained in the cadenced
ringing information element in the V5 PSTN messages.
          
Refer also to cpIwfNationalProfile above, which is used to select
	  group of Cadenced-ringing types for a specific country

cpIwfCadencedRingingTypeEntry row .1.3.6.1.4.1.164.20.5.1.8.2.1

An entry in the cpIwfCadencedRingingTypeTable that represents a
single ringing cycle. This entry contains a list of integers that
represent consecutive ON/OFF periods (in milliseconds). The
integer cadencedRingingNumPer…

Indexes

cpIwfCadencedRingingType

Column	Syntax	OID
cpIwfCadencedRingingType Index to the cpIwfCadencedRingingTypeTable. Refer also to cpIwfNationalProfile above, which is used to select group of Cadenced-ringing types for a specific country	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.164.20.5.1.8.2.1.1
cpIwfCadencedRingingNumPeriods Number of onPeriod/offPeriod pairs in the ringing cadence.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.164.20.5.1.8.2.1.2
cpIwfCadencedRingingOnPeriod1 The duration of the first on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.3
cpIwfCadencedRingingOffPeriod1 The duration of the first off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.4
cpIwfCadencedRingingOnPeriod2 The duration of the second on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.5
cpIwfCadencedRingingOffPeriod2 The duration of the second off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.6
cpIwfCadencedRingingOnPeriod3 The duration of the third on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.7
cpIwfCadencedRingingOffPeriod3 The duration of the third off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.8
cpIwfCadencedRingingOnPeriod4 The duration of the fourth on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.9
cpIwfCadencedRingingOffPeriod4 The duration of the fourth off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.10
cpIwfCadencedRingingOnPeriod5 The duration of the fifth on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.11
cpIwfCadencedRingingOffPeriod5 The duration of the fifth off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.12
cpIwfCadencedRingingOnPeriod6 The duration of the sixth on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.13
cpIwfCadencedRingingOffPeriod6 The duration of the sixth off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.14
cpIwfCadencedRingingOnPeriod7 The duration of the seventh on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.15
cpIwfCadencedRingingOffPeriod7 The duration of the seventh off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.16
cpIwfCadencedRingingOnPeriod8 The duration of the eighth on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.17
cpIwfCadencedRingingOffPeriod8 The duration of the eighth off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.18
cpIwfCadencedRingingOnPeriod9 The duration of the ninth on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.19
cpIwfCadencedRingingOffPeriod9 The duration of the ninth off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.20
cpIwfCadencedRingingOnPeriod10 The duration of the tenth on period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.21
cpIwfCadencedRingingOffPeriod10 The duration of the tenth off period, in milliseconds, in the ringing cycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.2.1.22
cpIwfCadencedRingingTypeRowStatus Status of one row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.20.5.1.8.2.1.23

This table contains the mapping from a Pulse duration type
identifier to the actual pulse pattern. This table is indexed by
both the value of the Pulse type sub-element and the the value of
the Pulse duration type sub-element within the Pulsed-signal
information element contained in a V5 PSTN message.

cpIwfPulseDurationTypeEntry row .1.3.6.1.4.1.164.20.5.1.8.3.1

An entry in the cpIwfPulseDurationTypeTable that represents a
pulse pattern. This entry contains a list of integers that
represent consecutive ON/OFF pulsing periods (in milliseconds).
The integer pulseDurationNumPeriod…

Indexes

cpIwfPulseType cpIwfPulseDurationType

Column	Syntax	OID
cpIwfPulseType First index to the cpIwfPulseDurationTypeTable.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.164.20.5.1.8.3.1.1
cpIwfPulseDurationType Second index to the cpIwfPulseDurationTypeTable.	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.164.20.5.1.8.3.1.2
cpIwfPulseDurationNumPeriods Number of onPeriod/offPeriod pairs in the pulse pattern.	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.164.20.5.1.8.3.1.3
cpIwfPulseDurationOnPeriod1 The duration of the first on period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.4
cpIwfPulseDurationOffPeriod1 The duration of the first off period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.5
cpIwfPulseDurationOnPeriod2 The duration of the second on period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.6
cpIwfPulseDurationOffPeriod2 The duration of the second off period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.7
cpIwfPulseDurationOnPeriod3 The duration of the third on period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.8
cpIwfPulseDurationOffPeriod3 The duration of the third off period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.9
cpIwfPulseDurationOnPeriod4 The duration of the fourth on period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.10
cpIwfPulseDurationOffPeriod4 The duration of the fourth off period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.11
cpIwfPulseDurationOnPeriod5 The duration of the fifth on period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.12
cpIwfPulseDurationOffPeriod5 The duration of the fifth off period, in milliseconds, in the pulse pattern.	Integer32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.164.20.5.1.8.3.1.13
cpIwfPulseDurationTypeRowStatus Status of one row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.20.5.1.8.3.1.14

This table contains the mapping from the Duration type identifier
to an actual period of time (in milliseconds). This table is
indexed by both the value of the Signal sub-element and the value
of the Duration type sub-element within in the Recognition-time
information element contained in a V5 PSTN message.

cpIwfDurationTypeEntry row .1.3.6.1.4.1.164.20.5.1.8.4.1

An entry in the cpIwfDurationTypeTable that specifies a time
interval in milliseconds.

Indexes

cpIwfSignal cpIwfDurationType

Column	Syntax	OID
cpIwfSignal First index to the cpIwfDurationTypeTable.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.164.20.5.1.8.4.1.1
cpIwfDurationType Second index to the cpIwfDurationTypeTable.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.164.20.5.1.8.4.1.2
cpIwfDuration A time period expressed in milliseconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.4.1.3
cpIwfDurationTypeRowStatus Status of one row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.20.5.1.8.4.1.4

This table contains the mapping from a Rate type identifier to
the actual pulse generation frequency in the CP-IWF. The index to
the table is the value of the Rate type sub-element contained in
the Enable-metering information element in the V5 PSTN messages.

cpIwfRateTypeEntry row .1.3.6.1.4.1.164.20.5.1.8.5.1

An entry in the cpIwfRateTypeTable that contains the rate at
which the metering pulses are generated. The rate is expressed as
pulses per hour.

Indexes

cpIwfRateType

Column	Syntax	OID
cpIwfRateType Index to the cpIwfRateTypeTable. NOTE: Value zero is invalid, as [EN 300 324-1] assigns a special meaning for that.	Integer32 Constraints: range: 1-127	.1.3.6.1.4.1.164.20.5.1.8.5.1.1
cpIwfRate The rate at which CP-IWF generates pulses to the analog line, expressed as pulses per hour.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.8.5.1.2
cpIwfRateTypeRowStatus Status of one row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.20.5.1.8.5.1.3

This table contains the mapping from a Attenuation value
identifier, contained in the Enable-metering information element,
to the actual attenuation applied by the CP-IWF.

cpIwfAttenuationValueEntry row .1.3.6.1.4.1.164.20.5.1.8.6.1

An entry in the cpIwfAttenuationValueTable. The attenuation is
expressed as decibels.

Indexes

cpIwfAttenuationValue

Column	Syntax	OID
cpIwfAttenuationValue Index to the cpIwfAttenuationValueTable.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.164.20.5.1.8.6.1.1
cpIwfAttenuation The Rx attenuation, in decibels, (e.g neg10db= -10dB) corresponding to the value of an Attenuation value sub-element inside the Enable-metering information element.	Enumerationr/w Enumerated Values: 2 neg10dB 3 neg8dB 4 neg6dB 5 neg4dB 6 neg2dB 7 zerodB 8 pos2dB 9 pos4dB 10 pos5dB	.1.3.6.1.4.1.164.20.5.1.8.6.1.2
cpIwfAttenuationValueRowStatus Status of one row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.20.5.1.8.6.1.3
cpIwfTxAttenuation The Tx attenuation, in decibels, (e.g neg10db= -10dB) corresponding to the value of an Attenuation value sub-element inside the Enable-metering information element.	Enumerationr/w Enumerated Values: 2 neg10dB 3 neg8dB 4 neg6dB 5 neg4dB 6 neg2dB 7 zerodB 8 pos2dB 9 pos4dB 10 pos5dB	.1.3.6.1.4.1.164.20.5.1.8.6.1.4

This table contains information on the configuration of the 
ISDN PRI ports on the CP-IWF in addition to the information 
contained in the ifTable about the physical interfaces to which 
the CP-IWF ports are peering with currently.

cpIwfIsdnPriPortEntry row .1.3.6.1.4.1.164.20.5.1.13.1

An entry in the cpIwfIsdnPriPortTable that represents a single
ISDN PRI port.

Indexes

isdnPriPortNumber

Column	Syntax	OID
isdnPriPortNumber The number identifying the ISDN PRI user port on the CP-IWF.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.13.1.1
isdnPriPhysicalPort This has the value of the ifIndex of the ifEntry of the physical ISDN PRI port to which this CP-IWF ISDN PRI port is connected. The value of (0) has the special meaning that this ISDN PRI port is not connected to any ph…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.13.1.2
isdnPriNumBChannels Maximum number of B channels supported by this ISDN PRI port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.13.1.3
isdnPriDAal2ChannelId The CID of the AAL2 connection transporting the D channel of this ISDN PRI port over the AAL2 VCC. The default value of this object is determined by the formula defined in revision 1 of af-vmoa-0145 section 4.4.2. Whe…	Integer32r/w Constraints: range: 16-255	.1.3.6.1.4.1.164.20.5.1.13.1.4
isdnPriPortLabel Label assigned by service provider to identify this CP-IWF port.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.164.20.5.1.13.1.5
isdnPriPortTestType This object is used to specify the type of test to run for the ISDN-PRI D channel or all channels. There are no results stored locally for a loopback test. Loopback of the whole ISDN-PRI physical user port is supporte…	Enumerationr/w Enumerated Values: 1 physicalPortLoopback 2 dChannelPhysicalPortLoopback 3 dChannelAal2Loopback	.1.3.6.1.4.1.164.20.5.1.13.1.6
isdnPriPortChannelsStatus This object is used to reflect the desired state and echo canceler usage for ALL 30 ISDN PRI B Channels. The actual state of each B channel is given by isdnPriBChannelOperStatus. Each channel is represented by 1 oc…	OctetStringr/w Constraints: range: 15-15	.1.3.6.1.4.1.164.20.5.1.13.1.7

This table contains information on the configuration of the 
ISDN PRI B channels for each PRI port. 
The number of entries is given by the value of isdnPriNumBChannels.

cpIwfIsdnPriBChannelEntry row .1.3.6.1.4.1.164.20.5.1.14.1

An entry in the cpIwfIsdnPriBChannelTable
that represents a single ISDN PRI B channel.

Indexes

isdnPriPortNumber isdnPriBChannelNumber

Column	Syntax	OID
isdnPriBChannelNumber The number identifying the ISDN PRI B channel on the CP-IWF.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.20.5.1.14.1.1
isdnPriBAal2ChannelId The CID of the AAL2 connection transporting this B channel over the AAL2 VCC. The default value of this object is determined by the formula defined in revision 1 of af-vmoa-0145 section 4.4.2. When the aal2Applicatio…	Integer32r/w Constraints: range: 16-255	.1.3.6.1.4.1.164.20.5.1.14.1.2
isdnPriBChannelAdminStatus This object is used to reflect the desired state of the ISDN PRI B Channel. The actual state of the B channel is given by isdnPriBChannelOperStatus. When this object is set to 'down', all existing calls on the B cha…	Enumerationr/w Enumerated Values: 1 up 2 down 3 shuttingDown 4 testing	.1.3.6.1.4.1.164.20.5.1.14.1.3
isdnPriBChannelOperStatus Provides the current operational status of the B channel.	Enumeration Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.164.20.5.1.14.1.4
isdnPriBChannelLabel Label assigned by service provider to identify this B channel. For example, may be used to hold Directory Number.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.164.20.5.1.14.1.5
isdnPriBChannelTestType This object is used to specify the type of test to run for the ISDN-PRI B channel. There are no results stored locally for a loopback test. Loopback of the individual B channels is supported. AAL2 Loopback is also sup…	Enumerationr/w Enumerated Values: 1 bChannelPhysicalPortLoopback 2 bChannelAal2Loopback	.1.3.6.1.4.1.164.20.5.1.14.1.6
isdnPriBChannelEchoCanceler Echo canceler activation. notApplicable - for channels with isdnPriBChannelAdminStatus = down.	Enumerationr/w Enumerated Values: 1 notApplicable 2 off 3 on	.1.3.6.1.4.1.164.20.5.1.14.1.7

This table contains performance statistics
pertinent to ISDN PRI B Channels. 
The number of entries is given by the value of 
isdnPriNumBChannels multiplied by the number of
ISDN PRI ports.

cpIwfIsdnPriBChannelStatsEntry row .1.3.6.1.4.1.164.20.5.1.15.1

An entry in the cpIwfIsdnPriBChannelStatsTable
that represents a single ISDN PRI B channel.

Indexes

isdnPriPortNumber isdnPriBChannelNumber

Column	Syntax	OID
cpIwfIsdnPriPortBChannelActiveSeconds Total length of time the AAL2 channel associated with this port/channel has been active, in seconds.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.15.1.1
cpIwfIsdnPriPortBChannelFillerOctets Total number of PCM filler octets injected into active media stream on this port/channel due to playout buffer underflow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.15.1.2
cpIwfIsdnPriPortBChannelDroppedOctets Total number of PCM payload octets dropped due to buffer overflow on this port/channel. Octets that are dropped because they arrived late, and which have already been substituted by filler PCM octets, shall not be coun…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.15.1.3
cpIwfIsdnPriPortBChannelAal2TxCells Total number of AAL2 cells transmitted by the ISDN PRI B channel indicated by isdnPriBChannelNumber.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.15.1.4
cpIwfIsdnPriPortBChannelAal2RxCells Total number of AAL2 cells received by the ISDN PRI B channel indicated by isdnPriBChannelNumber.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.15.1.5

This table contains performance statistics
pertinent to ISDN PRI D Channels. 
The number of entries is given by the number of
ISDN PRI ports.

cpIwfIsdnPriDChannelStatsEntry row .1.3.6.1.4.1.164.20.5.1.17.1

An entry in the cpIwfIsdnPriDChannelStatsTable
that represents a single ISDN PRI D channel.

Indexes

isdnPriPortNumber

Column	Syntax	OID
cpIwfIsdnPriPortDChannelActiveSeconds Total length of time the AAL2 channel associated with this port/channel has been active, in seconds.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.1
cpIwfIsdnPriPortDChannelFillerOctets Total number of PCM filler octets injected into active media stream on this port/channel due to playout buffer underflow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.2
cpIwfIsdnPriPortDChannelDroppedOctets Total number of PCM payload octets dropped due to buffer overflow on this port/channel. Octets that are dropped because they arrived late, and which have already been substituted by filler PCM octets, shall not be coun…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.3
cpIwfIsdnPriPortDChannelAal2TxCells Total number of AAL2 cells transmitted by the ISDN PRI D channel indicated by isdnPriDChannelNumber.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.4
cpIwfIsdnPriPortDChannelAal2RxCells Total number of AAL2 cells received by the ISDN PRI D channel indicated by isdnPriDChannelNumber.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.5
cpIwfIsdnPriPortDChannelHdlcTxCells Total number of HDLC cells transmitted by the ISDN PRI D channel indicated by isdnPriDChannelNumber.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.6
cpIwfIsdnPriPortDChannelHdlcRxCells Total number of HDLC cells received by the ISDN PRI D channel indicated by isdnPriDChannelNumber.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.7
cpIwfIsdnPriPortDChannelSstedTxCells Total number of SSTED layer cells transmitted by the ISDN PRI D channel indicated by isdnPriDChannelNumber.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.8
cpIwfIsdnPriPortDChannelSstedRxCells Total number of SSTED layer cells received by the ISDN PRI D channel indicated by isdnPriDChannelNumber.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.17.1.9

This table contains performance statistics pertinent to 
ISDN BRI channel (B1/B2 or D) or port specified by ifindex

cpIwfIsdnBriPortStatEntry row .1.3.6.1.4.1.164.20.5.1.18.1

An entry in the cpIwfIsdnBriPortStatsTable that represents
statistics for a single channel of the ISDN BRI port.

Indexes

cpIwfIsdnBriPortNumber cpIwfIsdnBriPortChannel

Column	Syntax	OID
cpIwfIsdnBriPortChannel Identify ISDN BRI specific channel (B1,B2 or D) or all port.	Enumeration Enumerated Values: 1 wholePort 2 briDchannel 3 channelB1 4 channelB2	.1.3.6.1.4.1.164.20.5.1.18.1.1
cpIwfIsdnBriPortHdlcFrames Total number of HDLC frames received by the D channel of the selected port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.2
cpIwfIsdnBriPortHdlcErrors Total number of HDLC frames received by the D channel of the selected port in which errors have been detected	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.3
cpIwfIsdnBriPortSStedRxPacket Total number of packets handled by the SSTED (Service Specific Transmission Error Detection) sublayer, used to carry the LES Embedded Operations Channel (EOC) serving the connections of the selected port	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.4
cpIwfIsdnBriPortSStedRxCRCErrors Total number of LES Embedded Operations Channel (EOC) packets rejected because of CRC errors detected at the SSTED sublayer (Service Specific Transmission Error Detection)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.5
cpIwfIsdnBriPortSStedRxLenErrors Total number of LES Embedded Operations Channel (EOC) packets rejected because of length errors detected at the SSTED sublayer (Service Specific Transmission Error Detection)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.6
cpIwfIsdnBriPortSStedRxErrors Total number of LES Embedded Operations Channel (EOC) packets rejected because of other types of errors detected at the SSTED sublayer. (Service Specific Transmission Error Detection)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.7
cpIwfIsdnBriChAAL2TxCells Total number of AAL2 cells transmitted by the ISDN channel indicated by cpIwfIsdnBriPortChannel	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.8
cpIwfIsdnBriChAAL2RxCells Total number of AAL2 cells in which errors occurred, transmitted by the ISDN channel indicated by cpIwfIsdnBriPortChannel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.9
cpIwfIsdnBriChAAL2RxErrors Total number of AAL2 cells with errors received through the ISDN channel indicated by cpIwfIsdnBriPortChannel	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.5.1.18.1.10