CONNEXIP-TRAPS-MIB

        The MIB Module for ConnexIp Traps.
    
Source file
CONNEXIP-TRAPS-MIB
Last revised
Identity
sonusConnexIpTrapsMIB
Base OID
1.3.6.1.4.1.2879.2.8.1.4
Imported Objects
SNMPv2-CONF NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString
SONUS-COMMON-TRAP-MIB sonusAlarmDescription sonusAlarmLevel sonusAlarmNodeID sonusAlarmSequenceId sonusAlarmTime sonusServerID
SONUS-SMI sonusCspsNotificationMIBs
Net-SNMP examples using the ribbon MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CONNEXIP-TRAPS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CONNEXIP-TRAPS-MIB::sonusConnexIpTrapsMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONNEXIP-TRAPS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONNEXIP-TRAPS-MIB::sonusConnexIpTrapsMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (15)
.1.3.6.1.4.1.2879.2.8.1.4
.1.3.6.1.4.1.2879.2.8.1.4.1
.1.3.6.1.4.1.2879.2.8.1.4.1.1
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.1
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.10
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.2
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.3
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.4
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.5
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.6
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.7
Enumeration
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.8
Enumeration
.1.3.6.1.4.1.2879.2.8.1.4.1.1.1.9
Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. SONUS-SMIribbon
  5. SONUS-COMMON-TCribbon
  6. SONUS-COMMON-TRAP-MIBribbon
  7. CONNEXIP-TRAPS-MIBribbonselected
Notifications / Traps (20)
NameOIDDescription
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.1
This trap indicates that a power supply of the server failed.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.10
This trap indicates that at least two fans of the server are present.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.11
This trap indicates that a card is inserted into a specified slot on the server.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.12
This trap indicates that a card is removed from a specified slot on the server.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.13
This trap indicates that a specified slot on the server is enabled.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.14
This trap indicates that a specified slot on the server is disabled.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.15
This trap indicates that a specified slot on the server is going to dryup mode.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.16
This trap indicates that a specified slot on the server is mismatched with peer server.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.17
This trap indicates that a specified slot on the server mismatch with peer server is cleared .
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.18
This trap indicates that a specified slot on the server is locked due to mismatch with peer server, system admin dspMismatchAction set to preserve redunndancy.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.19
This trap indicates that a specified slot on the server lockout is cleared.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.2
This trap indicates that a power supply of the server is normal.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.20
This trap indicates that a specified slot on the server load/boot failed on 3 or more consecutive attempts. Module should be disabled, replaced and re-enabled in order to be returned to service.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.3
This trap indicates that a power supply unit of the server is removed.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.4
This trap indicates that a power supply unit of the server is inserted.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.5
This trap indicates that a fan of the server is operating normal.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.6
This trap indicates that a fan of the server is failed.
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.7
This trap indicates that a fan of the server is removed (absent).
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.8
This trap indicates that a fan of the server is inserted (present).
.1.3.6.1.4.1.2879.2.8.1.4.1.1.0.9
This trap indicates that two or more fans of the server are removed (absent).