COMPAQ-L2MGMT-MIB Table View

This table specifies the port membership for each logical link.

swPortTrunkEntry row .1.3.6.1.4.1.232.161.3.2.1.3.1

A list of information specifies which ports group form
a single logical link.

Indexes

swPortTrunkIndex

Column	Syntax	OID
swPortTrunkIndex The index of logical port trunk.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.1.3.1.1
swPortTrunkName The name of logical port trunk.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.232.161.3.2.1.3.1.2
swPortTrunkMasterPort The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of t…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.1.3.1.3
swPortTrunkPortList Indicate member ports of a logical trunk.	PortListr/w	.1.3.6.1.4.1.232.161.3.2.1.3.1.4
swPortTrunkState This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.232.161.3.2.1.3.1.5

A list of port snooping entries.Port mirroring function provides an easy
way to monitor traffic on any port. In this way any good packets appears
on the source mirror port also shows up on the target mirror port and 
doesn't to reconstruct the LAN.

swPortMirrorCtrlEntry row .1.3.6.1.4.1.232.161.3.2.2.2.1

A list of information provide an easy way to monitor traffic on any port.
The use can bring a fancy network monitor attaching to any target mirror
port and set the port to be monitored as source mirror port.

Indexes

swPortMirrorIndex

Column	Syntax	OID
swPortMirrorIndex This object indicates the port snooping entry number.There is just only one now.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.2.2.1.1
swPortMirrorSourcePort This object indicates the number of port to be sniffed. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.2.2.1.2
swPortMirrorTargetPort This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MI…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.2.2.1.3
swPortMirrorDirection This object uses to setup the what packets will be mirrored.	Enumerationr/w Enumerated Values: 1 other 2 ingress 3 egress 4 both	.1.3.6.1.4.1.232.161.3.2.2.2.1.4
swPortMirrorState This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.232.161.3.2.2.2.1.5

The table controls the Vlan's IGMP function. Its scale depends on
current VLAN state (swVlanInfoStatus). If VLAN is disabled or
in Mac-Base mode, there is only one entry in the table, with
index 1. If VLAN is in Port-Base or 802.1q mode, the number of
entries can be up to 12, with index range from 1 to 12.

swIGMPCtrlEntry row .1.3.6.1.4.1.232.161.3.2.3.3.1

The entry in IGMP control table (swIGMPCtrlTable). The entry is
effective only when IGMP capture switch (swDevIGMPCaptureState)
is enabled.

Indexes

swIGMPCtrlVid

Column	Syntax	OID
swIGMPCtrlVid This object indicates the IGMP control entry's VLAN id. If VLAN is disabled or in Mac-Base mode, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.3.3.1.1
swIGMPQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this interface.	secondsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.3.3.1.2
swIGMPQueryMaxResponseTime The maximum query response time advertised in IGMPv2 queries on this interface.	secondsInteger32r/w Constraints: range: 1-25	.1.3.6.1.4.1.232.161.3.2.3.3.1.3
swIGMPRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. N…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.232.161.3.2.3.3.1.4
swIGMPCtrlTimer The timer value for sending IGMP query packet when none was sent by the multicast router in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Pl…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.3.3.1.5
swIGMPQuerierVersion Select the IGMP Querier Version	Enumerationr/w Enumerated Values: 1 other 2 v0Querier 3 v1Querier 4 v2Querier	.1.3.6.1.4.1.232.161.3.2.3.3.1.6
swIGMPCtrlState This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.232.161.3.2.3.3.1.7

The table contains the number current IGMP query packets which
is captured by this device, as well as the IGMP query packets
sent by the device.

swIGMPInfoEntry row .1.3.6.1.4.1.232.161.3.2.3.5.1

Information about current IGMP query information, provided that
swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN
entry are all enabled.

Indexes

swIGMPInfoVid

Column	Syntax	OID
swIGMPInfoVid This object indicates the Vid of associated IGMP info table entry. It follows swIGMPCtrlVid in the associated entry of IGMP control table (swIGMPCtrlTable).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.3.5.1.1
swIGMPInfoQueryCount This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.3.5.1.2
swIGMPInfoTxQueryCount This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.3.5.1.3

This table containing current IGMP information which is captured by this 
device, provided that swDevIGMPCaptureState and swIGMPCtrlState of
associated VLAN entry are all enabled. Note that the priority
of IGMP table entries is lower than Filtering Table, i.e. if there is a
table hash collision between the entries of IGMP Table and Filtering Table
inside the switch H/W address table, then Filtering Table entry overwrite
the colliding entry of IGMP Table. See swFdbFilterTable description also.

swIGMPEntry row .1.3.6.1.4.1.232.161.3.2.3.7.1

Information about IGMP information which is captured by this
device, provided that swDevIGMPCaptureState and swIGMPCtrlState of
associated VLAN entry are all enabled.

Indexes

swIGMPVid swIGMPGroupIpAddr

Column	Syntax	OID
swIGMPVid This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.3.7.1.1
swIGMPGroupIpAddr This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.232.161.3.2.3.7.1.2
swIGMPMacAddr This object is to identify the mac address corresponding to swIGMPGroupIpAddr, in per-Vlan basis..	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.232.161.3.2.3.7.1.3
swIGMPPortMap This object indicates which ports are belonged to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered…	PortList	.1.3.6.1.4.1.232.161.3.2.3.7.1.4
swIGMPIpGroupReportCount This object indicates how many report packets are received by our device corresponding to this entry since IGMP function is enabled, in per-Vlan basis. .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.232.161.3.2.3.7.1.5