CLAB-GW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
53
.1.3.6.1.4.1.4491.4.6.1.3.3 · 1 row entry · 14 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk clabGWMAPDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CLAB-GW-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CLAB-GW-MIB::clabGWMAPDomainTable'
MAP domain settings [MAP]. Each instance models a MAP domain.
MAP supports two transport modes, both of which use NAPT44 (modified
to use a restricted port range):
  MAP-E (TransportMode = Encapsulation) uses an IPv4-in-IPv6 tunnel.
  MAP-T (TransportMode = Translation) uses stateless NAT64.
clabGWMAPDomainEntry row .1.3.6.1.4.1.4491.4.6.1.3.3.1
This table allows configuration and monitoring of MAP Domains.
Column Syntax OID
Index value of the clabGWMAPDomainTable.
Unsigned32
Constraints:
range: 1-256
.1.3.6.1.4.1.4491.4.6.1.3.3.1.1
Enables or disable this MAP domain.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4491.4.6.1.3.3.1.2
The current operational state of the MAP domain.
The Error_Misconfigured value indicates that a necessary configuration
value is undefined or invalid. Enumeration of:
Disabled
Enabled
Error_Misconfigured (OPTIO…
Enumeration
Enumerated Values:
1disabled
2enabled
3errorMisconfigured
4error
.1.3.6.1.4.1.4491.4.6.1.3.3.1.3
A non-volatile handle used to reference this instance. Alias
provides a mechanism for an ACS to label this instance for future
reference.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4491.4.6.1.3.3.1.4
The transport mode to use. Corresponds to the [MAP-DHCP] S46_CONT_MAPE
and S46_CONT_MAPT container options.
Enumeration of:
'encapsulation' (MAP-E [MAP])
'translation' (MAP-T [MAP-T])
Enumerationr/w
Enumerated Values:
1encapsulation
2translation
.1.3.6.1.4.1.4491.4.6.1.3.3.1.5
The IP interface with which this MAP domain is associated.
This will always be a NAT-ted upstream (WAN) interface.
The End-user IPv6 prefix IPv6Prefix is one of this IP interface's
prefixes.
OctetStringr/w
Constraints:
range: 0-256
.1.3.6.1.4.1.4491.4.6.1.3.3.1.6
The MAP domain's End-user IPv6 prefix.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.4491.4.6.1.3.3.1.7
The MAP domain's End-user IPv6 prefix length
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4491.4.6.1.3.3.1.8
The MAP Border Relay (BR) address or prefix.
For MAP-E this is the BR address and therefore MUST be a /128 [MAP].
For MAP-T this is the BR prefix [MAP-T].
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.4491.4.6.1.3.3.1.9
The MAP Border Relay (BR) address or prefix length.
For MAP-E this is the BR address and therefore MUST be a /128 [MAP].
For MAP-T this is the BR prefix [MAP-T].
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4491.4.6.1.3.3.1.10
DSCP with which to mark the outer IP header for traffic that is
associated with this MAP domain. Downstream packets are never re-marked.
Automatic DSCP marking behavior is a local matter to the device,
possibly influenc…
Integer32r/w
Constraints:
range: -2-63
.1.3.6.1.4.1.4491.4.6.1.3.3.1.11
Whether to include low-numbered (system) ports in the Port-sets.
Normally ports in the range [0:2^(16-PSIDOffset)-1] are excluded,
e.g. for the default PSIDOffset value of 4, ports [0:4095] are not
included in the Port-…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4491.4.6.1.3.3.1.12
Number of configured entries in the TunnelInterface table for
this tunnel.
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.4491.4.6.1.3.3.1.13
The RowStatus interlock for the creation and deletion of a table
entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4491.4.6.1.3.3.1.14
.1.3.6.1.4.1.4491.4.6.1.3.4 · 1 row entry · 15 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk clabGWMAPDomainRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CLAB-GW-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CLAB-GW-MIB::clabGWMAPDomainRuleTable'
The MAP domain's Mapping Rules [MAP].
The rule with the longest match between its IPv6Prefix and the end-user
IPv6Prefix is the Basic Mapping Rule (BMR).
Any of the rules (including the BMR) can be a Forwarding Mapping Rule.
At most one entry in this table (regardless of whether or not it is enabled)
can exist with a given value for Alias.
On creation of a new table entry, the CPE MUST choose an initial value for Alias
such that the new entry does not conflict with any existing entries.
clabGWMAPDomainRuleEntry row .1.3.6.1.4.1.4491.4.6.1.3.4.1
List of individual rules mapped into MAP domains.
Column Syntax OID
The key for a unique instance of this object.
Unsigned32
Constraints:
range: 1-256
.1.3.6.1.4.1.4491.4.6.1.3.4.1.1
Enable or disable rule instance for MAP domain.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4491.4.6.1.3.4.1.2
The status of this Rule instance. Enumeration of:
- Disabled
- Enabled
- Error (OPTIONAL)
The Error value MAY be used by the CPE to indicate a locally defined
error condition.
Enumeration
Enumerated Values:
1disabled
2enabled
3error
.1.3.6.1.4.1.4491.4.6.1.3.4.1.3
A non-volatile handle used to reference this instance. Alias
provides a mechanism for an ACS to label this instance for future
reference.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4491.4.6.1.3.4.1.4
The mechanism via which the Rule was created
Enumeration of:
'dhcpv6'
'static'
Enumerationr/w
Enumerated Values:
1dhcpv6
2static
.1.3.6.1.4.1.4491.4.6.1.3.4.1.5
The Rule IPv6 prefix. The Rule IPv6 prefix is a leading part of the
end-user IPv6Prefix, i.e. its length MUST be less than or equal to the
length of the end-user IPv6Prefix, and it MUST match the end-user
IPv6Prefix.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.4491.4.6.1.3.4.1.6
The Rule IPv6 prefix length.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4491.4.6.1.3.4.1.7
[IPv4Prefix] The Rule IPv4 prefix.
INET-ADDRESS-MIBInetAddressIPv4r/w
Type Constraints:
range: 4
.1.3.6.1.4.1.4491.4.6.1.3.4.1.8
[IPv4Prefix] The Rule IPv4 prefix length.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4491.4.6.1.3.4.1.9
The length in bits of the Embedded Address (EA) bits in the end-user
IPv6Prefix.
Unsigned32r/w
Constraints:
range: 0-48
.1.3.6.1.4.1.4491.4.6.1.3.4.1.10
Indicates whether this rule is a Forwarding Mapping Rule (FMR).
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4491.4.6.1.3.4.1.11
Port-set ID (PSID) offset in bits. The number of Port-sets is
2^PSIDOffset. Corresponds to the [MAP-DHCP] S46_PORTPARAMS (Port
Parameters) option's offset field.
Unsigned32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.4491.4.6.1.3.4.1.12
The length in bits of the Port-set id (PSID) configured in the PSID
parameter. Corresponds to the [MAP-DHCP] S46_PORTPARAMS (Port
Parameters) option's PSID-len field
moved on a be on per Rule level.
Unsigned32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.4491.4.6.1.3.4.1.13
Port-set ID (PSID) to use in preference to the value extracted from the
Embedded Address (EA) bits. Only the high order PSIDLength bits of the
PSID value are used, so the parameter is ignored when PSIDLength is zero.
Co…
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4491.4.6.1.3.4.1.14
The RowStatus interlock for the creation and deletion of a table
entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4491.4.6.1.3.4.1.15
.1.3.6.1.4.1.4491.4.6.1.3.5 · 1 row entry · 8 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk clabGWMAPDomainIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CLAB-GW-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CLAB-GW-MIB::clabGWMAPDomainIfTable'
This table contains information specific to LAN side MAP domain interface.
clabGWMAPDomainIfEntry row .1.3.6.1.4.1.4491.4.6.1.3.5.1
List of individual source interface entry mapped into a MAP domain.
Column Syntax OID
The key for a unique instance of this object.
Unsigned32
Constraints:
range: 1-256
.1.3.6.1.4.1.4491.4.6.1.3.5.1.1
Enable or disable MAP domain interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4491.4.6.1.3.5.1.2
The status of this TunnelInterface. When Enable is false then Status
SHOULD normally be Down (or NotPresent or Error if there is a
fault condition on the interface).
When Enable is false then Status SHOULD normally be D…
Enumeration
Enumerated Values:
1up
2down
3unknown
4dormant
5notPresent
6lowerLayerDown
7error
.1.3.6.1.4.1.4491.4.6.1.3.5.1.3
A non-volatile handle used to reference this instance. Alias
provides a mechanism for an ACS to label this instance for future
reference.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4491.4.6.1.3.5.1.4
MAP domain interface name (The textual name of the tunnel interface
as assigned by the CPE)
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4491.4.6.1.3.5.1.5
The accumulated time in seconds since the tunnel interface entered
its current operational state.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4491.4.6.1.3.5.1.6
Comma-separated list of source ifIndex values whose traffic will be
passed through the MAP domain associated with this Domain Interface.
OctetStringr/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.4.6.1.3.5.1.7
The RowStatus interlock for the creation and deletion of a table
entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4491.4.6.1.3.5.1.8
.1.3.6.1.4.1.4491.4.6.1.3.6 · 1 row entry · 16 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk clabGWMAPDomainIfStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CLAB-GW-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CLAB-GW-MIB::clabGWMAPDomainIfStatsTable'
This table provides statistical information of MAP Domain interfaces.
This table extends clabGWMAPDomainIfTable. The index used is
imported from the the clabGWMAPDomainIfTable. If a row is
deleted from clabGWMAPDomainRuleTable, then the extension row
will also be deleted.
clabGWMAPDomainIfStatsEntry row .1.3.6.1.4.1.4491.4.6.1.3.6.1
Each table entry provides statistical information on a MAP Domain interface.
Column Syntax OID
Number of bytes sent.
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.1
Number of bytes received.
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.2
Number of packets sent.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.3
Number of packets received.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.4
Number of errors sent.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.5
Number of errors that were received.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.6
Number of unicast packets sent.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.7
Number of unicast packets received.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.8
The total number of packets sent that were discarded.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.9
The total number of packets sent that were discarded.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.10
Number of multicast packets sent.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.11
Number of multicast packets received.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.12
Number of broadcast packets sent.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.13
Number of broadcast packets received.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.14
Number of unknown protocol packets received.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.15
The CE checks that the MAP domain received packets that
have a destination port number that is in the range configured
for the CE, discarding the packet if it is not.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.4.6.1.3.6.1.16