CISCOSBLAN1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
17

rlLan1x86VlanMappingTable

table
.1.3.6.1.4.1.9.6.1.101.224.5 · 1 row entry · 3 columns
Open in standard view
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rlLan1x86VlanMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSBLAN1-MIB' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSBLAN1-MIB::rlLan1x86VlanMappingTable' 
A table that contains information mapping s-tag to group id.
rlLan1x86VlanMappingEntry row .1.3.6.1.4.1.9.6.1.101.224.5.1
A mapping of incoming s-tag to a group.
Indexes
Column Syntax OID
rlLan1x86VlanMappingVlanId
The s-tag to mapped to group
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.9.6.1.101.224.5.1.1
rlLan1x86VlanMappingGroupId
group for filtering traffic
GroupIdr/w
Type Constraints:
range: 0..1279
 .1.3.6.1.4.1.9.6.1.101.224.5.1.2
rlLan1x86VlanMappingRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.6.1.101.224.5.1.3

rlLan1VfMacMappingTable

table
.1.3.6.1.4.1.9.6.1.101.224.6 · 1 row entry · 4 columns
Open in standard view
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rlLan1VfMacMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSBLAN1-MIB' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSBLAN1-MIB::rlLan1VfMacMappingTable' 
A table that contains information mapping Mac to s-tag.
rlLan1VfMacMappingEntry row .1.3.6.1.4.1.9.6.1.101.224.6.1
A mapping of incoming s-tag to a group.
Indexes
Column Syntax OID
rlLan1VfMacMappingDstMacAddress
destination mac address
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.6.1.101.224.6.1.1
rlLan1VfMacMappingVlanId
The s-tag
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.9.6.1.101.224.6.1.2
rlLan1VfMacMappingMulticast
cp - Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic bridged into the CP VLAN from modules to x86
noncp - Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic
Enumerationr/w
Enumerated Values:
1none
2cp
3noncp
 .1.3.6.1.4.1.9.6.1.101.224.6.1.3
rlLan1VfMacMappingRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.6.1.101.224.6.1.4

rlLan1ModulePortTable

table
.1.3.6.1.4.1.9.6.1.101.224.7 · 1 row entry · 6 columns
Open in standard view
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rlLan1ModulePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSBLAN1-MIB' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSBLAN1-MIB::rlLan1ModulePortTable' 
A table that contains information on a LAN1 module port.
rlLan1ModulePortEntry row .1.3.6.1.4.1.9.6.1.101.224.7.1
A mapping of incoming s-tag to a group.
Indexes
Column Syntax OID
rlLan1ModulePortIfIndex
Specifies the interface-id.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.6.1.101.224.7.1.1
rlLan1ModulePortCPAllowed
Specifies that CP traffic is allowed on the port, it is used to
allow CP multicast/broadcast traffic.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.6.1.101.224.7.1.2
rlLan1ModulePortMulticastBroadcastAllowedVlan
Specifies that multicast/broadcast traffic is allowed on the CP VLAN
or on non-CP VLAN.
If the parameter is not configured then only unicast traffic is allowed.
Enumerationr/w
Enumerated Values:
1none
2cp
3noncp
 .1.3.6.1.4.1.9.6.1.101.224.7.1.3
rlLan1ModulePortIngressGroupId
Specifies the group number assigned to the input frame on the interface
GroupIdr/w
Type Constraints:
range: 0..1279
 .1.3.6.1.4.1.9.6.1.101.224.7.1.4
rlLan1ModulePortEgressGroupIdList
Specifies the list of egress group numbers
GroupIdListr/w .1.3.6.1.4.1.9.6.1.101.224.7.1.5
rlLan1ModulePortRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.6.1.101.224.7.1.6

rlLan1x86PfcTable

table
.1.3.6.1.4.1.9.6.1.101.224.8 · 1 row entry · 4 columns
Open in standard view
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rlLan1x86PfcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSBLAN1-MIB' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSBLAN1-MIB::rlLan1x86PfcTable' 
A table that contains information on a LAN1 x86 port PFC configuration per priority.
rlLan1x86PfcEntry row .1.3.6.1.4.1.9.6.1.101.224.8.1
PFC information per priority
Indexes
Column Syntax OID
rlLan1x86PriorityIndex
Specifies the priority index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.6.1.101.224.8.1.1
rlLan1x86PriorityIsLossy
Specifies if priority is lossy or lossless
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.6.1.101.224.8.1.2
rlLan1x86PriorityXoffThreshold
Specifies the value of triggering pause frames when crossing over the threshold
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.224.8.1.3
rlLan1x86PriorityXonThreshold
Specifies the value of triggering continue frames when crossing under the threshold
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.224.8.1.4