CISCOSB-UDP Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
10
.1.3.6.1.4.1.9.6.1.101.42.1 · 1 row entry · 5 columns
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rsUdpRelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSB-UDP' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSB-UDP::rsUdpRelayTable'
This table contains the udp relay configuration per port.
rsUdpRelayEntry row .1.3.6.1.4.1.9.6.1.101.42.1.1
The row definition for this table.
Column Syntax OID
rsUdpRelayDstPortThe UDP port number in the UDP message header.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.6.1.101.42.1.1.1
rsUdpRelaySrcIpInfThe source interface IP that receives UDP message.
255.255.255.255 from all IP interface.
0.0.0.0 - 0.255.255.255 and 127.0.0.0 - 127.255.255.255
not relevant addresses.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.9.6.1.101.42.1.1.2
rsUdpRelayDstIpAddrThe destination IP address the UDP message will be forward.
0.0.0.0 does not forward, 255.255.255.255 broadcasts to all
addresses.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.9.6.1.101.42.1.1.3
rsUdpRelayStatusThe status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.6.1.101.42.1.1.4
rsUdpRelayUserInfoThe information used for implementation purposesSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.6.1.101.42.1.1.5
.1.3.6.1.4.1.9.6.1.101.42.3 · 1 row entry · 5 columns
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rlUdpSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSB-UDP' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSB-UDP::rlUdpSessionTable'
This table contains the udp sessions information
rlUdpSessionEntry row .1.3.6.1.4.1.9.6.1.101.42.3.1
The row definition for this table.
Column Syntax OID
rlUdpSessionLocalAddrTypeThe type of the rlUdpSessionLocalAddress addressINET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.6.1.101.42.3.1.1
rlUdpSessionLocalAddrThe UDP port session number.INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.6.1.101.42.3.1.2
rlUdpSessionLocalPortThe UDP port local IP address.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.6.1.101.42.3.1.3
rlUdpSessionAppInstThe instance ID for the application on the port (for future use).Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.6.1.101.42.3.1.4
rlUdpSessionAppNameThe name of the application that created the session.OctetString
Constraints:
range: 0-12
.1.3.6.1.4.1.9.6.1.101.42.3.1.5