The MIB module for the management of zoning within
the framework of Cisco's Zoning Server (ZS) Archi-
tecture which realizes the FC-GS3 requirements for
Zone Server. This MIB enables managers to configure
and monitor zoning server parameters.
Additionally, Cisco's Zoning Server allows for
configuration of Lun zoning, which is an extension
to the Zoning Server standard specified by FC-GS3.
Glossary of terms used
----------------------
VSAN - Virtual Storage Area Network.
Zone Merge - When the ISL (Inter Switch Link)
between 2 switches is brought up,
the zoning databases on the 2
switches are compared by means of
the Zone Merge protocol. If the
2 databases can be merged, the
ISL is brought up. Otherwise,
the link is isolated.
ication is generated whenever the local
Zone Server rejects a registration request.
The Zone Server should update the
zoneServiceRejReasonCode and zoneServiceRejReason-
CodeExp objects with the corresponding reason
code and reason code explanation before sending the
notification.
The zoneMemberType and zoneMemberID identify the
source of the request.
zoneMergeFailureNotify
.1.3.6.1.4.1.9.9.294.1.4.0.2
ication is generated whenever there is
a zone merge failure.
If all VSANs on a link have a zone-merge failure
at the same time, then just one notification is
generated in which zoneMergeFailureVSANNum object
has a zero value.
The zoneMergeFailureObject and
zoneMergeFailureReason assist in providing
information regarding the point of merge failure.
zoneMergeSuccessNotify
.1.3.6.1.4.1.9.9.294.1.4.0.3
ication is generated whenever a zone
merge happens successfully.
If all VSANs on a link have a zone-merge success
at the same time, then just one notification is
generated in which zoneMergeSuccessVSANNum object
has a zero value.
zoneDefZoneBehaviourChngNotify
.1.3.6.1.4.1.9.9.294.1.4.0.4
ication is generated whenever the
value of zoneDefaultZoneBehaviour changes.
zoneUnsuppMemInIntOpModeNotify
.1.3.6.1.4.1.9.9.294.1.4.0.5
ication is generated whenever one or
more zone members are not supported in the
mode in which the local switch is currently
configured to function. The switch can be
configured to operate in certain 'interoperable'
modes on a VSAN basis to enable it to work with
switches from other vendors. The zoneVsanId object
identifies the VSAN on which the mismatch has
been identified.
zoneActivateNotify
.1.3.6.1.4.1.9.9.294.1.4.0.6
ication is generated whenever a
zone set is activated/deactivated on a VSAN.
The zoneSetActivateResult object denotes
the outcome of the activation/deactivation.
The zoneSwitchWwn object represents the
WWN of the local device.
zoneCompactNotify
.1.3.6.1.4.1.9.9.294.1.4.0.7
ication is generated whenever a
zone compaction on the VSAN specified by
zoneCompactVsan happens successfully.