CISCO-WWNMGR-MIB

        The World Wide Name (WWN) in the fibre channel networking 
technology is equivalent to the MAC address in Ethernet. 
There are six different types of WWNs defined in ANSI 
Standard for Fibre Channel Framing and Signalling (FC-FS) 
Spec Rev 1.4. 
        
This mib provides the mechanism to configure and report
WWNs for the fibre channel devices connected to a
fibre channel switch.
        
GLOSSARY :
NAA   Network Address Authority (NAA) address formats 
      for WWN.
        
OUI   Organization Unique Identifier.
        
VSAN  Virtual Storage Area Network, 
      similar to a VLAN.
    
Source file
CISCO-WWNMGR-MIB
Last revised
Identity
ciscoWwnmgrMIB
Base OID
1.3.6.1.4.1.9.9.286
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-ST-TC FcNameId
CISCO-VSAN-MIB vsanIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Gauge32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC MacAddress RowStatus StorageType
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WWNMGR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WWNMGR-MIB::ciscoWwnmgrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WWNMGR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WWNMGR-MIB::ciscoWwnmgrMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (22)
.1.3.6.1.4.1.9.9.286
.1.3.6.1.4.1.9.9.286.1
.1.3.6.1.4.1.9.9.286.1.1
.1.3.6.1.4.1.9.9.286.1.1.1
Unsigned32
.1.3.6.1.4.1.9.9.286.1.1.2
Unsigned32
.1.3.6.1.4.1.9.9.286.1.1.3
.1.3.6.1.4.1.9.9.286.1.1.4
Unsigned32
.1.3.6.1.4.1.9.9.286.1.1.5
.1.3.6.1.4.1.9.9.286.1.1.6
Unsigned32
.1.3.6.1.4.1.9.9.286.1.1.7
Unsigned32
.1.3.6.1.4.1.9.9.286.1.1.8
.1.3.6.1.4.1.9.9.286.1.1.9
.1.3.6.1.4.1.9.9.286.1.1.9.1
.1.3.6.1.4.1.9.9.286.1.1.9.1.1
.1.3.6.1.4.1.9.9.286.1.1.9.1.2
.1.3.6.1.4.1.9.9.286.1.1.9.1.3
.1.3.6.1.4.1.9.9.286.1.2
.1.3.6.1.4.1.9.9.286.1.2.1
.1.3.6.1.4.1.9.9.286.1.2.1.0
.1.3.6.1.4.1.9.9.286.2
.1.3.6.1.4.1.9.9.286.2.1
.1.3.6.1.4.1.9.9.286.2.2
Dependencies (11) 6 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (2)

OID .1.3.6.1.4.1.9.9.286.2.1.1
The compliance statement for entities which
implement the CISCO-WWNMGR-MIB.
Required groups

OID .1.3.6.1.4.1.9.9.286.2.1.2
The compliance statement for entities which
implement the CISCO-WWNMGR-MIB.
Required groups
Object refinements
ObjectAccessSyntaxDescription
wwnmVsanWwnRowStatus
active(1), createAndGo(4), destroy(6)
Only 'active', 'createAndGo' and 'destroy' needs
to be supported.
Notifications / Traps (4)
NameOIDDescription
.1.3.6.1.4.1.9.9.286.1.2.1.0.1
A WWN shortage notification is generated whenever the
number of available Type 1 WWNs 'wwnmType1AvailableWwns'
reduces to either 20% or 10% or 0% of the maximum number
of Type 1 WWNs 'wwnmType1MaxWwns'.
After a shortage event is generated for a threshhold
(say 20%), another such event will not be generated until
after an availability event (see
wwnmType1WwnAvailableNotify) is generated for the same
threshold.
.1.3.6.1.4.1.9.9.286.1.2.1.0.2
An availability notification is generated whenever
the number of available Type 1 WWNs
(wwnmType1AvailableWwns) increases to either 25% or 15%
or 5% of the maximum number of Type 1 WWNs
(wwnmType1MaxWwns) after a wwnmType1WwnShortageNotify
notification has been generated for either 20% or 10%
or 5% respectively.
.1.3.6.1.4.1.9.9.286.1.2.1.0.3
A WWN shortage notification is generated whenever the
number of available Type Other WWNs
'wwnmTypeOtherAvailableWwns' reduces to either 20% or
10% or 0% of the maximum number of Type Other WWNs
'wwnmTypeOtherMaxWwns'.
After a shortage event is generated for a threshhold
(say 20%), another such event will not be generated until
after an availability event (see
wwnmType1WwnAvailableNotify) is generated for the same
threshold.
.1.3.6.1.4.1.9.9.286.1.2.1.0.4
An availability notification is generated whenever
the number of available Type Other WWNs
(wwnmTypeOtherAvailableWwns) increases to either 25%
or 15% or 5% of the maximum number of Type Other WWNs
(wwnmTypeOtherMaxWwns) after a
wwnmTypeOtherWwnShortageNotify notification has been
generated for either 20% or 10% or 5% respectively.