CISCO-WIRELESS-DOCS-IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
13
Rows
13
Columns
97
.1.3.6.1.4.1.9.9.167.1.1.1 · 1 row entry · 6 columns
This table describes the attributes of a channel
group which consists of one or more downstream and
upstream channels.
cwdIfChannelEntry entry .1.3.6.1.4.1.9.9.167.1.1.1.1
List of attributes for a single Channel. There
is one per Point-to-multipoint card.
An entry in this table exists for each ifEntry with an
ifType of propDocsWirelessMacLayer(nnn).
Indexes
IF-MIBifIndex
Column Syntax OID
cwdIfChannelUpFrequency
The reference center frequency used by the upstream
channels in this channel.
kHzInteger32r/w
Constraints:
range: 0-60000000
.1.3.6.1.4.1.9.9.167.1.1.1.1.1
cwdIfChannelUpWidth
The maximum bandwidth that can be used by any upstream
channel. The sum of the bandwidths used by all
upstream channels created within this channel cannot
exceed this value.
kHzInteger32r/w
Constraints:
range: 0-500000
.1.3.6.1.4.1.9.9.167.1.1.1.1.2
cwdIfChannelDownFrequency
The reference center frequency used by the
downstream channels in this channel.
kHzInteger32r/w
Constraints:
range: 0-60000000
.1.3.6.1.4.1.9.9.167.1.1.1.1.3
cwdIfChannelDownWidth
The maximum bandwidth that can be used by any
downstream channel. The sum of the bandwidths
used by all downstream channels created
within this channel cannot exceed this value.
kHzInteger32r/w
Constraints:
range: 0-500000
.1.3.6.1.4.1.9.9.167.1.1.1.1.4
cwdIfChannelMiniSlotTimeBaseTick
This object represents a unit of measurement of mini-slots.
Upstream mini-slots and bandwidth allocations are done
in multiples of this unit of time.
MicrosecondsInteger32
Constraints:
range: 0-102400000
.1.3.6.1.4.1.9.9.167.1.1.1.1.5
cwdIfChannelSubChannelPlanVer
This object represents the sub-channel plan version number
common to both upstream and downstream supported by the
hardware.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.1.1.1.6
.1.3.6.1.4.1.9.9.167.1.1.2 · 1 row entry · 6 columns
This table describes the attributes of downstream
channels (frequency bands).
cwdIfDownstreamChannelEntry entry .1.3.6.1.4.1.9.9.167.1.1.2.1
List of attributes for a single downstream channel.
The index to this table is an ifIndex with an ifType
of propDocsWirelessDownStream(nnn).
Indexes
IF-MIBifIndex
Column Syntax OID
cwdIfDownChannelSubChannelNumber
This identifies the sub-channel used by this downstream.
The value of this object determines the usability of the
other downstream channels.
Integer32r/w
Constraints:
range: 1-1024
.1.3.6.1.4.1.9.9.167.1.1.2.1.1
cwdIfDownChannelId
The internal (DOCSIS) identification of the downstream
channel within this particular MAC interface. If the
interface is down, the object returns the last assigned
value. If the downstream channel ID is unknown, this
o…
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.9.9.167.1.1.2.1.2
cwdIfDownChannelFrequency
The downstream center frequency associated with
this channel. The channel settings determine this
value.
kHzInteger32
Constraints:
range: 0-60000000
.1.3.6.1.4.1.9.9.167.1.1.2.1.3
cwdIfDownChannelWidth
The bandwidth of this downstream channel. The channel
settings determine this value.
kHzInteger32
Constraints:
range: 0-500000
.1.3.6.1.4.1.9.9.167.1.1.2.1.4
cwdIfDownChannelPower
At the HE, the operational transmit power. At the SU,
the received power level. May be set to zero at the SU
if power level measurement is not supported.
If the interface is down, this object returns the
configured valu…
dBm - decibel milliwattsInteger32r/w
Constraints:
range: -80-50
.1.3.6.1.4.1.9.9.167.1.1.2.1.5
cwdIfDownChannelModProfileIndex
An index into cwdIfModulationTable that describes
modulation characteristics of this channel.
This object returns 0 if the cwdIfModulationTable
does not exist, or there is no corresponding row
in that table that describ…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.1.2.1.6
.1.3.6.1.4.1.9.9.167.1.1.4 · 1 row entry · 12 columns
Describes the attributes of attached upstream channels.
cwdIfUpstreamChannelEntry entry .1.3.6.1.4.1.9.9.167.1.1.4.1
List of attributes for a single upstream channel.
The primary index is an ifIndex with an ifType of
propDocsWirelessUpstream(nnn).
Indexes
IF-MIBifIndex
Column Syntax OID
cwdIfUpChannelSubChannelNumber
This identifies the sub-channel used by this upstream.
Integer32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.9.9.167.1.1.4.1.1
cwdIfUpChannelId
The internal (DOCSIS) identification of the upstream
channel within this particular MAC interface. If the
interface is down, the object returns the most current
value. If the upstream channel ID is unknown, this
object …
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.9.9.167.1.1.4.1.2
cwdIfUpChannelFrequency
The center of the upstream frequency associated with
this channel. The channel settings determine this value.
kHzInteger32
Constraints:
range: 0-60000000
.1.3.6.1.4.1.9.9.167.1.1.4.1.3
cwdIfUpChannelWidth
The bandwidth of this upstream channel. The channel
settings determine this value.
kHzInteger32
Constraints:
range: 0-500000
.1.3.6.1.4.1.9.9.167.1.1.4.1.4
cwdIfUpChannelTargetPower
The target receive power of this upstream channel at the
headend and the transmit power of the channel at the
subscriber end.
dBm - decibel milliwattsInteger32r/w
Constraints:
range: -80-50
.1.3.6.1.4.1.9.9.167.1.1.4.1.5
cwdIfUpChannelModProfileIndex
An index into cwdIfModulationTable that describes
modulation characteristics of this channel.
This object returns 0 if the cwdIfModulationTable
does not exist or is empty.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.1.4.1.6
cwdIfUpChannelSlotSize
The number of units of time-slot (measured by
cwdIfChannelMiniSlotTimeBaseTick) in each upstream
mini-slot. Returns zero if the value is undefined
or unknown.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.1.4.1.7
cwdIfUpChannelTxTimingOffset
A measure of the current round trip time at the SU, or the
maximum round trip time seen by the HE. Used for timing
of SU upstream transmissions to ensure synchronized
arrivals at the HE. Units are in terms of
(cwdIfCha…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.1.4.1.8
cwdIfUpChannelRangBackoffStart
This value determines the initial contention resolution
back-off window used by the SU when attempting to transmit
an initial ranging request. The SU randomly selects a
number within the back-off window defined by this…
Integer32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.9.9.167.1.1.4.1.9
cwdIfUpChannelRangBackoffEnd
This value determines the final contention resolution
back-off window used by the SU when attempting to transmit
an initial ranging request. The SU randomly selects a
number within the back-off window defined by this
Integer32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.9.9.167.1.1.4.1.10
cwdIfUpChannelTxBackoffStart
This value determines the initial contention resolution
back-off window used by the SU when attempting to
transmit data packets. The SU randomly selects a
number within the back-off window defined by this
parameter t…
Integer32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.9.9.167.1.1.4.1.11
cwdIfUpChannelTxBackoffEnd
This value determines the final contention resolution
back-off window used by the SU when attempting to
transmit data packets. The SU randomly selects a
number within the back-off window defined by this
parameter the…
Integer32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.9.9.167.1.1.4.1.12
.1.3.6.1.4.1.9.9.167.1.1.5 · 1 row entry · 8 columns
Describes the attributes for each class of service.
cwdIfQosProfileEntry entry .1.3.6.1.4.1.9.9.167.1.1.5.1
Describes the attributes for a single class of service.

The row operation for this table is as follows:
1. This table will be implemented as read-only at the SU.
SU entries are created by the agent base…
Indexes
cwdIfQosProfIndex
Column Syntax OID
cwdIfQosProfIndex
The index value which uniquely identifies an entry
in the cwdIfQosProfileTable. Any arbitrary integer
within the range can be used as index to create a row.
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.9.9.167.1.1.5.1.1
cwdIfQosProfPriority
A relative priority assigned to this service when
allocating bandwidth. Zero indicates lowest priority.
seven highest.
Interpretation of priority is device-specific.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.9.9.167.1.1.5.1.2
cwdIfQosProfMaxUpBandwidth
The maximum upstream bandwidth, in bits per second,
allowed for a service with this service class.
Zero if there is no restriction of upstream bandwidth.
Integer32r/w
Constraints:
range: 0-100000000
.1.3.6.1.4.1.9.9.167.1.1.5.1.3
cwdIfQosProfGuarUpBandwidth
Minimum guaranteed upstream bandwidth, in bits per second,
allowed for a service with this service class.
Integer32r/w
Constraints:
range: 0-100000000
.1.3.6.1.4.1.9.9.167.1.1.5.1.4
cwdIfQosProfMaxDownBandwidth
The maximum downstream bandwidth, in bits per second,
allowed for a service with this service class.
Zero if there is no restriction of downstream bandwidth.
Integer32r/w
Constraints:
range: 0-100000000
.1.3.6.1.4.1.9.9.167.1.1.5.1.5
cwdIfQosProfMaxTxBurst
The maximum number of mini-slots that may be requested
for a single upstream transmission.
A value of zero means there is no limit.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.9.167.1.1.5.1.6
cwdIfQosProfBaselinePrivacy
Indicates whether Baseline Privacy is enabled for this
service class.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.167.1.1.5.1.7
cwdIfQosProfStatus
Controls and reflects the status of rows in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.9.9.167.1.1.5.1.8
.1.3.6.1.4.1.9.9.167.1.1.6 · 1 row entry · 5 columns
At the SU, this table describes the PHY signal quality
of downstream channels. At the HE, this table describes
the PHY signal quality of upstream channels.
cwdIfSignalQualityEntry entry .1.3.6.1.4.1.9.9.167.1.1.6.1
At the SU, describes the PHY signal quality of a
downstream channel. At the HE, describes the PHY signal
quality of an upstream channel.
An entry in this table exists for each ifEntry with an
ifType of propDocsWirelessU…
Indexes
IF-MIBifIndex
Column Syntax OID
cwdIfSigQIncludesContention
true(1) if this HE includes contention intervals in
the counters in this table. Always false(2) for SUs.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.167.1.1.6.1.1
cwdIfSigQUnerroreds
Codewords received on this channel without error.
This includes all codewords, whether or not they
were part of frames destined for this device.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.1.6.1.2
cwdIfSigQCorrecteds
Codewords received on this channel with correctable
errors. This includes all codewords, whether or not
they were part of frames destined for this device.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.1.6.1.3
cwdIfSigQUncorrectables
Codewords received on this channel with uncorrectable
errors. This includes all codewords, whether or not
they were part of frames destined for this device.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.1.6.1.4
cwdIfSigQSignalNoise
Signal to Interference plus Noise ratio as perceived
for this channel.
CISCO-WIRELESS-TC-MIBCwrdBm
Textual Convention: CISCO-WIRELESS-TC-MIBCwrdBm Integer32
Type Constraints:
range: -80..33
.1.3.6.1.4.1.9.9.167.1.1.6.1.5
.1.3.6.1.4.1.9.9.167.1.1.7 · 1 row entry · 6 columns
Describes  modulation parameters associated with one
or more upstream and/or downstream channels.
cwdIfModulationEntry entry .1.3.6.1.4.1.9.9.167.1.1.7.1
Describes a modulation profile for one or more
upstream and downstream channels.
Initial default entries may be created at system
initialization time by the agent.
The row operation for this table is as follows :
1. An…
Indexes
cwdIfModIndex
Column Syntax OID
cwdIfModIndex
An index into the Channel Modulation table
(cwdIfModulationTable) representing modulation
parameters of a channel.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.9.9.167.1.1.7.1.1
cwdIfModRowStatus
Controls and reflects the status of rows in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.9.9.167.1.1.7.1.2
cwdIfModBandwidth
The maximum bandwidth that can be used by a channel
with using this modulation profile.
kHzInteger32r/w
Constraints:
range: 0-500000
.1.3.6.1.4.1.9.9.167.1.1.7.1.3
cwdIfModThroughput
This represents the throughput expected of the
identified radio link.
bpsInteger32r/w
Constraints:
range: 0-50000000
.1.3.6.1.4.1.9.9.167.1.1.7.1.4
cwdIfModBurstLength
The duration of the OFDM burst used by the physical layer.
This is also the duration of the MAC minislot.
Not all the settings will be supported by a particular ODU.
Consult the capabilities of the ODU to determine t…
Enumerationr/w
Enumerated Values:
1veryShort
2short
3medium
4long
.1.3.6.1.4.1.9.9.167.1.1.7.1.5
cwdIfModMultipathRobustness
The quantitative level of robustness to multipath (also
known as delay spread tolerance). The degree of
multipath in the environment will vary with deployment.
Consult installation and deployment documentation to
deter…
Enumerationr/w
Enumerated Values:
1standard
2high
.1.3.6.1.4.1.9.9.167.1.1.7.1.6
.1.3.6.1.4.1.9.9.167.1.2.1 · 1 row entry · 3 columns
Describes the attributes of each SU MAC interface,
extending the information available from ifEntry.
cwdIfSuMacEntry entry .1.3.6.1.4.1.9.9.167.1.2.1.1
An entry containing objects describing attributes of
each MAC entry, extending the information in ifEntry.
An entry in this table exists for each ifEntry with an
ifType of propDocsWirelessMacLayer(nnn).
Indexes
IF-MIBifIndex
Column Syntax OID
cwdIfSuHeAddress
Identifies the HE that controls this MAC domain. At the
SU, this will be the source address from SYNC, MAP, and
other MAC-layer messages. If the HE is unknown, returns
00-00-00-00-00-00.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.167.1.2.1.1.1
cwdIfSuCapabilities
Identifies the capabilities of the MAC implementation
at this interface. Note that packet transmission is
always supported. Therefore, there is no specific bit
required to explicitly indicate this capability.
Bits
Enumerated Values:
0atmCells
1concatenation
.1.3.6.1.4.1.9.9.167.1.2.1.1.2
cwdIfSuRangingRespTimeout
Waiting time for a Ranging Response packet.
SNMPv2-TCTimeIntervalr/w
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.167.1.2.1.1.3
.1.3.6.1.4.1.9.9.167.1.2.2 · 1 row entry · 14 columns
This table maintains a number of status objects
and counters for Subscriber Units.
cwdIfSuStatusEntry entry .1.3.6.1.4.1.9.9.167.1.2.2.1
A set of status objects and counters for a single MAC
layer instance in a Subscriber unit.
An entry in this table exists for each ifEntry with an
ifType of propDocsWirelessMacLayer(nnn).
Indexes
IF-MIBifIndex
Column Syntax OID
cwdIfSuStatusValue
Current Subscriber unit connectivity state, as specified
in the RF Interface Specification.
Enumeration
Enumerated Values:
1other
2notReady
3notSynchronized
4phySynchronized
5usParametersAcquired
6rangingComplete
7ipComplete
8todEstablished
9securityEstablished
10paramTransferComplete
11registrationComplete
12operational
13accessDenied
.1.3.6.1.4.1.9.9.167.1.2.2.1.1
cwdIfSuStatusCode
Status code for this Subscriber unit as defined in the
RF Interface Specification. The status code consists
of a single character indicating error groups, followed
by a two- or three-digit number indicating the status
c…
OctetString .1.3.6.1.4.1.9.9.167.1.2.2.1.2
cwdIfSuStatusTxPower
The operational transmit power for the attached upstream
channel.
dBm - decibel milliwattsInteger32
Constraints:
range: -80-50
.1.3.6.1.4.1.9.9.167.1.2.2.1.3
cwdIfSuStatusResets
Number of times the SU reset or initialized
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.4
cwdIfSuStatusLostSyncs
Number of times the SU lost synchronization with
the downstream channel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.5
cwdIfSuStatusInvalidMaps
Number of times the SU received invalid MAP messages.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.6
cwdIfSuStatusInvalidUcds
Number of times the SU received invalid UCD messages.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.7
cwdIfSuStatusInvalidRangingResp
Number of times the SU received invalid ranging response
messages.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.8
cwdIfSuStatusInvalidRegResp
Number of times the SU received invalid registration
response messages.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.9
cwdIfSuStatusT1Timeouts
Number of times counter T1 expired in the SU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.10
cwdIfSuStatusT2Timeouts
Number of times counter T2 expired in the SU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.11
cwdIfSuStatusT3Timeouts
Number of times counter T3 expired in the SU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.12
cwdIfSuStatusT4Timeouts
Number of times counter T4 expired in the SU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.13
cwdIfSuStatusRangingAborteds
Number of times the ranging process was aborted
by the HE.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.2.1.14
.1.3.6.1.4.1.9.9.167.1.2.3 · 1 row entry · 8 columns
Describes the attributes of each upstream service queue
on a SU.
cwdIfSuServiceEntry entry .1.3.6.1.4.1.9.9.167.1.2.3.1
Describes the attributes of an upstream bandwidth service
queue.
An entry in this table exists for each Service ID.
The primary index is an ifIndex with an ifType of
propDocsWirelessMacLayer(nnn).
Indexes
IF-MIBifIndex cwdIfSuServiceId
Column Syntax OID
cwdIfSuServiceId
Identifies a service queue for upstream bandwidth. The
attributes of this service queue are shared between the
SU and the HE. The HE allocates upstream bandwidth
to this service queue based on requests from the SU and
o…
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.9.9.167.1.2.3.1.1
cwdIfSuServiceQosProfile
The index in cwdIfQosProfileTable describing the quality
of service attributes associated with this particular
service. If cwdIfQosProfileTable is not supported or
doesn't exist, this object returns the value of zero.
Integer32
Constraints:
range: 0-16383
.1.3.6.1.4.1.9.9.167.1.2.3.1.2
cwdIfSuServiceTxSlotsImmed
The number of upstream mini-slots which have been used to
transmit data PDUs in immediate (contention) mode. This
includes only those PDUs which are presumed to have
arrived at the headend (i.e., those which were explic…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.3.1.3
cwdIfSuServiceTxSlotsDed
The number of upstream mini-slots which have been used to
transmit data PDUs in dedicated mode (i.e., as a result
of a unicast Data Grant).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.3.1.4
cwdIfSuServiceTxRetries
The data PDUs transmitted directly in contention data
slots expects explicit acknowledgement from the Headend.
If the acknowledgement is not received the PDUs are
transmitted again. This object is the number of attempt…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.3.1.5
cwdIfSuServiceTxExceeded
The data PDUs transmitted directly in contention data
slots expects explicit acknowledgement from the Headend.
If the acknowledgement is not received the PDUs are
transmitted again. After excessive retries the data
P…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.3.1.6
cwdIfSuServiceRqRetries
The number of attempts to transmit bandwidth requests
which did not result in acknowledgment.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.3.1.7
cwdIfSuServiceRqExceeded
The number of requests for bandwidth which failed due to
excessive retries without acknowledgment.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.2.3.1.8
.1.3.6.1.4.1.9.9.167.1.3.1 · 1 row entry · 6 columns
Describes the attributes of each HE MAC interface,
extending the information available from ifEntry.
cwdIfHeMacEntry entry .1.3.6.1.4.1.9.9.167.1.3.1.1
An entry containing objects describing attributes of each
MAC entry, extending the information in ifEntry.
An entry in this table exists for each ifEntry with an
ifType of propDocsWirelessMacLayer(nnn).
Indexes
IF-MIBifIndex
Column Syntax OID
cwdIfHeCapabilities
Identifies the capabilities of the HE MAC
implementation at this interface. Note that packet
transmission is always supported. Therefore, there
is no specific bit required to explicitly indicate
this capability.
Bits
Enumerated Values:
0atmCells
1concatenation
.1.3.6.1.4.1.9.9.167.1.3.1.1.1
cwdIfHeSyncInterval
The interval between HE transmission of successive SYNC
messages at this interface.
MillisecondsInteger32r/w
Constraints:
range: 1-200
.1.3.6.1.4.1.9.9.167.1.3.1.1.2
cwdIfHeUcdInterval
The interval between HE transmission of successive
Upstream Channel Descriptor messages for each upstream
channel at this interface.
MillisecondsInteger32r/w
Constraints:
range: 1-2000
.1.3.6.1.4.1.9.9.167.1.3.1.1.3
cwdIfHeMaxServiceIds
The maximum number of service IDs that may be
simultaneously active.
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.9.9.167.1.3.1.1.4
cwdIfHeInsertionInterval
The amount of time between each broadcast station
maintenance grant. Broadcast station maintenance
grants are used to allow new subscriber units to join the
network. Zero indicates that a vendor-specific algorithm
is us…
SNMPv2-TCTimeIntervalr/w
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.167.1.3.1.1.5
cwdIfHeInvitedRangingAttempts
The maximum number of attempts to make on invitations
for ranging requests. A value of zero means the system
should attempt to range forever.
Integer32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.9.9.167.1.3.1.1.6
.1.3.6.1.4.1.9.9.167.1.3.2 · 1 row entry · 6 columns
For the MAC layer, this group maintains a number of
status objects and counters.
cwdIfHeStatusEntry entry .1.3.6.1.4.1.9.9.167.1.3.2.1
Status entry for a single MAC layer.
An entry in this table exists for each ifEntry with an
ifType of propDocsWirelessMacLayer(nnn).
Indexes
IF-MIBifIndex
Column Syntax OID
cwdIfHeStatusInvalidRangeReqs
This object counts invalid RNG-REQ messages received on
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.2.1.1
cwdIfHeStatusRangingAborteds
This object counts ranging attempts that were explicitly
aborted by the HE.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.2.1.2
cwdIfHeStatusInvalidRegReqs
This object counts invalid REG-REQ messages received on
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.2.1.3
cwdIfHeStatusFailedRegReqs
This object counts failed registration attempts, i.e.,
authentication failures and class of service failures,
on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.2.1.4
cwdIfHeStatusInvalidDataReqs
This object counts invalid data request messages
received on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.2.1.5
cwdIfHeStatusT5Timeouts
This object counts the number of times counter T5
expired on this interface.
The T5 timer is the 'Wait for Upstream Channel Change
Response Timer' on the Head end.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.2.1.6
.1.3.6.1.4.1.9.9.167.1.3.3 · 1 row entry · 10 columns
A set of objects in the HE, maintained for each
Subscriber unit connected to this HE.
cwdIfHeSuStatusEntry entry .1.3.6.1.4.1.9.9.167.1.3.3.1
Status information for a single Subscriber unit.
An entry in this table exists for each Subscriber unit
that is connected to the HE implementing this table.
Indexes
cwdIfHeSuStatusIndex
Column Syntax OID
cwdIfHeSuStatusIndex
Index value to uniquely identify an entry in this table.
For an individual Subscriber Unit, this index value should
not change during HE uptime.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.9.9.167.1.3.3.1.1
cwdIfHeSuStatusMacAddress
MAC address of this Subscriber Unit. If the Subscriber
Unit has multiple MAC addresses, this is the MAC
address associated with the Wireless interface.
Each SU has only one wireless MAC interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.167.1.3.3.1.2
cwdIfHeSuStatusIpAddress
IP address of this Subscriber Unit. If the Subscriber
Unit has no IP address assigned, or the IP address is
unknown, this object returns a value of 0.0.0.0. If
the Subscriber Unit has multiple IP addresses, this
objec…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.9.9.167.1.3.3.1.3
cwdIfHeSuStatusDownChanIfIndex
IfIndex of the downstream channel this Subscriber Unit
is connected to. If the downstream channel is unknown,
this object returns a value of zero.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.167.1.3.3.1.4
cwdIfHeSuStatusUpChanIfIndex
IfIndex of the upstream channel this Subscriber Unit
is connected to. If the upstream channel is unknown,
this object returns a value of zero.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.167.1.3.3.1.5
cwdIfHeSuStatusRxPower
The receive power as perceived for upstream data from
this subscriber unit.
If the receive power is unknown, this object returns
a value of zero.
dBm Decibel milliwattsInteger32
Constraints:
range: -80-33
.1.3.6.1.4.1.9.9.167.1.3.3.1.6
cwdIfHeSuStatusTimingOffset
A measure of the current round trip time for this SU.
Used for timing of SU upstream transmissions to ensure
synchronized arrivals at the HE. Units are in terms
of (cwdIfUpstreamMiniSlotTimeBaseTick/64). Returns
zero if…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.3.1.7
cwdIfHeSuStatusValue
Current subscriber unit connectivity state, as specified
in the RF Interface Specification. Returned status
information is the SU status as assumed by the HE,
and indicates the following events:
other(1)
Any state ot…
Enumeration
Enumerated Values:
1other
2ranging
3rangingAborted
4rangingComplete
5ipComplete
6registrationComplete
7accessDenied
.1.3.6.1.4.1.9.9.167.1.3.3.1.8
cwdIfHeSuStatusIfIndex
The HE MAC interface index (ifType of
propDocsWirelessMacLayer(nnn)) that SU connects to.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.9.9.167.1.3.3.1.9
cwdIfHeSuStatusServiceId
The SU's primary Service ID.
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.9.9.167.1.3.3.1.10
.1.3.6.1.4.1.9.9.167.1.3.4 · 1 row entry · 7 columns
Describes the attributes of upstream service queues
in a Head-end System.
cwdIfHeServiceEntry entry .1.3.6.1.4.1.9.9.167.1.3.4.1
Describes the attributes of a single upstream bandwidth
service queue.
Entries in this table exist for each ifEntry with an
ifType of propDocsWirelessMacLayer(nnn), and for
each service queue (Service ID) within this M…
Indexes
IF-MIBifIndex cwdIfHeServiceId
Column Syntax OID
cwdIfHeServiceId
Identifies a service queue for upstream bandwidth. The
attributes of this service queue are shared between the
Subscriber unit and the Head-end System.
The HE allocates upstream bandwidth to this service
queue based on…
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.9.9.167.1.3.4.1.1
cwdIfHeServiceSuStatusIndex
Pointer to an entry in cwdIfHeSuStatusTable identifying
the Subscriber unit using this Service Queue.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.9.9.167.1.3.4.1.2
cwdIfHeServiceAdminStatus
Allows a service class for a particular modem to be
suppressed, (re-)enabled, or deleted altogether.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3destroyed
.1.3.6.1.4.1.9.9.167.1.3.4.1.3
cwdIfHeServiceQosProfile
The index in cwdIfQosProfileTable describing the quality
of service attributes associated with this particular
service. If cwdIfQosProfileTable is not supported, this
object returns the value of zero.
Integer32
Constraints:
range: 0-16383
.1.3.6.1.4.1.9.9.167.1.3.4.1.4
cwdIfHeServiceCreateTime
The value of sysUpTime when this entry was created.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.9.9.167.1.3.4.1.5
cwdIfHeServiceInOctets
The cumulative number of Packet Data octets received
on this Service ID. The count does not include the
size of the Wireless MAC header
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.4.1.6
cwdIfHeServiceInPackets
The cumulative number of Packet Data packets received
on this Service ID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.167.1.3.4.1.7