CISCO-WAN-FR-RSRC-PART-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
9

frPortCnfResPartGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.1.5.1 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frPortCnfResPartGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-RSRC-PART-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-RSRC-PART-MIB::frPortCnfResPartGrpTable' 
This table is for configuring resource partition
parameters. A resource partition is configured 
on frame relay port. The frame relay port 
if available in ifTable is identified by ifType
values frameRelayService(44) and frForward(158).
frPortCnfResPartGrpEntry row .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1
An entry for a resource partition. A resource
partition has to be created before connections
can be added on a frame relay port.
Indexes
Column Syntax OID
frResPartPortNum
The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.

If frame relay port is available in ifTable,
then the…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.1
frResPartCtrlrNum
This object identifies the controller
which can be used for accessing the resources.

The possible values are :
par(1) : Portable Auto Route controller.
: This value is applicable in Release…
Enumeration
Enumerated Values:
1par
2pnni
3tag
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.2
frResPartRowStatus
This object is used for adding/deleting/modifying
resource partition on a frame relay port.

In MGX Release 1.x:
To add an entry, this object should be set to add, value for
other objects should no…
Enumerationr/w
Enumerated Values:
1add
2del
3mod
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.3
frResPartNumOfLcnAvail
This represents number of LCNs available for this
controller and this port.
FRSM VHS 2CT3 can support LCNs upto 4000.
FRSM12 can support LCNs upto 16000.
Integer32r/w
Constraints:
range: 0-16000
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.4
frResPartDlciLow
This represents low end of reserved DLCI.
Integer32r/w
Constraints:
range: 0-8388607
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.5
frResPartDlciHigh
This represents high end of reserved DLCI.
Integer32r/w
Constraints:
range: 0-8388607
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.6
frResPartIngrPctBW
The percentage of total ingress bandwidth reserved.
percentageInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.7
frResPartEgrPctBW
The percentage of total egress bandwidth reserved.
percentageInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.8
frResPartCtrlrID
This is the controller identifier for the
resource patition.
The default value is set for PNNI controller.
Refer object frResPartCtrlrNum.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.9