CISCO-WAN-FR-CONN-STAT-MIB

        The MIB module for frame relay connection
statistics.
        
Terminologies Used:
        
 SIW    - Frame-Relay-to ATM Service Interworking
         
 FECN   - Forward Explicit Congestion Notification.
          The FECN bit in Frame Relay header communicate
          network congestion to the endpoint in the forward
          direction.
        
 BECN   - Backward Explicit Congestion Notification.
          The BECN bit in Frame Relay header communicate
          network congestion to the endpoint in the backward
          direction.
        
 DE     - Discard Eligibility. The DE bit in Frame Relay
          header communicates the loss priority. A marked 
          frame with a DE bit value of 1 is considered
          less important than other frames in transmission
          and should be discarded before frames with a 
          DE bit value of zero.
        
 Tagged - Some of the statistics objects described in 
         this MIB are applicable where the 
         information is Set by the Switch/Service-Module.
         These objects contain word 'Tagged' in the name.
        
         For example : 'rcvFramesTaggedFECN'; This is the
         counter where FECN is set by the Switch in
         the frame received from the network. FECN was
         not set in the frame from the Network.
        
         The bit Set by the switch on an incoming or outgoing
         frame is called 'tagged' in this mib.
    
Source file
CISCO-WAN-FR-CONN-STAT-MIB
Last revised
Identity
ciscoWanFrConnStatMIB
Base OID
1.3.6.1.4.1.351.150.48
Imported Objects
BASIS-MIB frChan
CISCOWAN-SMI ciscoWan
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WAN-FR-CONN-STAT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WAN-FR-CONN-STAT-MIB::ciscoWanFrConnStatMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-CONN-STAT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-CONN-STAT-MIB::ciscoWanFrConnStatMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (66)
.1.3.6.1.4.1.351.110.5.1.2.3
.1.3.6.1.4.1.351.110.5.1.2.3.1
.1.3.6.1.4.1.351.110.5.1.2.3.1.1
Integer32
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.1
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.10
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.11
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.12
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.13
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.14
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.15
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.16
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.17
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.18
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.19
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.2
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.20
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.21
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.22
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.23
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.24
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.25
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.26
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.27
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.28
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.29
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.3
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.30
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.31
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.32
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.33
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.34
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.35
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.36
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.37
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.38
Enumeration
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.39
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.4
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.40
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.41
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.42
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.43
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.44
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.45
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.46
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.47
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.48
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.49
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.5
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.50
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.6
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.7
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.8
.1.3.6.1.4.1.351.110.5.1.2.3.1.1.9
.1.3.6.1.4.1.351.110.5.1.2.3.2
.1.3.6.1.4.1.351.110.5.1.2.3.2.1
Integer32
.1.3.6.1.4.1.351.110.5.1.2.3.2.1.1
.1.3.6.1.4.1.351.110.5.1.2.3.2.1.2
.1.3.6.1.4.1.351.110.5.1.2.3.2.1.3
.1.3.6.1.4.1.351.110.5.1.2.3.2.1.4
.1.3.6.1.4.1.351.110.5.1.2.3.2.1.5
.1.3.6.1.4.1.351.110.5.1.2.3.2.1.6
.1.3.6.1.4.1.351.110.5.1.2.3.2.1.7
.1.3.6.1.4.1.351.150.48
.1.3.6.1.4.1.351.150.48.2
.1.3.6.1.4.1.351.150.48.2.1
.1.3.6.1.4.1.351.150.48.2.2
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCOWAN-SMIcisco
  3. BASIS-MIBcisco
  4. SNMPv2-CONFrfc
  5. CISCO-WAN-FR-CONN-STAT-MIBciscoselected
Conformance Groups (3)
Compliance Statements (1)

OID .1.3.6.1.4.1.351.150.48.2.2.1
The compliance statement for Frame Relay
Connection Statstics MIB.
Required groups
mandatory ciscoWanFrConnStatsGroup
optional ciscoWanFrConnABRStatsGroup This group is mandatory for Frame Relay modules
supporting ABR connections.
optional ciscoWanFrConnQueueStatsGroup This group is mandatory for Frame Relay modules
supporting connections providing queue depth
and DE threshold related statistics.