This MIB is used to support Programmable
CAS signaling Bit configuration on modules
that support voice traffic.
This MIB will enable programming of the CAS
bits in order to translate incoming/outgoing
bit patterns from/to the TDM or packet side
interface.
Terminology:
ABCD - Signaling bits describing off-hook,
on-hook, idle, flash, etc events.
DSP - Digital Signal Processing
CAS - Channal Associated Signaling
E&M - Ear and Mouth Protocol
TDM - Time Division Multiplexed
|
ciscoVoiceCasModuleMIB1.3.6.1.4.1.9.9.389 |
| ciscoMgmt | CISCO-SMI |
| EntPhysicalIndexOrZero | CISCO-TC |
| SnmpAdminString | SNMP-FRAMEWORK-MIB |
| MODULE-COMPLIANCE, OBJECT-GROUP | SNMPv2-CONF |
| MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 | SNMPv2-SMI |
| TEXTUAL-CONVENTION, RowStatus | SNMPv2-TC |
| Name | Base Type | Values/Constraints |
|---|---|---|
| casBitNoAction(1), casBitSetToZero(2), casBitSetToOne(3), casBitInvertBit(4), casBitInvertABit(5), casBitInvertBBit(6), casBitInvertCBit(7), casBitInvertDBit(8), casBitABit(9), casBitBBit(10), casBitCBit(11), casBitDBit(12) | ||
| dBit(0), cBit(1), bBit(2), aBit(3) |
![]() | .1.3.6.1.4.1.9.9.389 | |
![]() | .1.3.6.1.4.1.9.9.389.0 | |
![]() | .1.3.6.1.4.1.9.9.389.1 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.10 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.11 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.12 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.2 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.3 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.4 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.5 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.6 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.7 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.8 | |
![]() | .1.3.6.1.4.1.9.9.389.1.1.1.1.9 | |
![]() | .1.3.6.1.4.1.9.9.389.2 | |
![]() | .1.3.6.1.4.1.9.9.389.2.1 | |
![]() | .1.3.6.1.4.1.9.9.389.2.2 |