CISCO-VMPS-MIB Table View

A table for creating and controling an instance of
the VMPS.

vmpsConfigEntry row .1.3.6.1.4.1.9.9.53.1.1.1.1

An entry (conceptual row) in the vmpsConfigTable.

Indexes

vmpsIndex

Column	Syntax	OID
vmpsIndex An arbitrary index identifying this particular instance of the VMPS. This index need not be consistent across reboots. For devices only supporting one instance of the VMPS this object need only accept the value of 1. …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.53.1.1.1.1.1
vmpsAdminStatus The desired state of the VMPS as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the lecsOperStatus.	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.53.1.1.1.1.2
vmpsDownloadServerAddress The IP address of the host supplying the TFTP configuration data for the VMPS. If this value of this object is 0.0.0.0 then the VMPS will not attempt to download configuration information.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.9.53.1.1.1.1.3
vmpsConfigFileName The filename of the configuration file the VMPS will attempt to download.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.53.1.1.1.1.4
vmpsTriggerDownload When set to `loadDatabase' this object will cause the VMPS to initiate a TFTP download of the configuration tables stored at the host identified by the vmpsDownloadServerAddress. Setting to 'loadRcpDataBase' will caus…	Enumerationr/w Enumerated Values: 1 noOperation 2 loadDatabase 3 loadRcpDataBase	.1.3.6.1.4.1.9.9.53.1.1.1.1.5
vmpsFallbackVlan This is the VLAN returned in the configuration response when a given configuration request contains data that matches nothing in the VMPS database (given the specified classifiers). A value of the empty string signifie…	VlanNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.53.1.1.1.1.6
vmpsSecureMode If in secure mode the VMPS will instruct the requesting device to shutdown a port as a result of a match failure.	Enumerationr/w Enumerated Values: 1 secure 2 open	.1.3.6.1.4.1.9.9.53.1.1.1.1.7
vmpsManagementDomain The management domain this VMPS is servicing.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.53.1.1.1.1.8
vmpsRowStatus The status of the conceptual row. A valid value of vmpsManagementDomain must be set before the row can become active. Devices that only support one instance of the VMPS may opt to always have a row in this table insta…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.53.1.1.1.1.9
vmpsRcpRemoteUserNamedeprecated Remote username for download of the VMPS database file via RCP protocol. This object must be set when vmpsTriggerDownload is set to loadRcpDataBase(3). This object will be have no effect for protocols other than RCP.	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.53.1.1.1.1.10
vmpsRcpRemoteUserName2 This object deprecates the object vmpsRcpRemoteUserName to support full range, i.e. SIZE(0..255), of TEXTUAL-CONVENTION SnmpAdminString. The object indicates remote username for download of the VMPS datab…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.53.1.1.1.1.11

Statistics relating to this instance of the VMPS.

vmpsStatsEntry row .1.3.6.1.4.1.9.9.53.1.1.2.1

An entry (conceptual row) in the vmpsStatsTable.

Indexes

No indexes recorded

Column	Syntax	OID
vmpsLastRestart The value of sysUpTime when the VMPS was last restarted.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.53.1.1.2.1.1
vmpsInConfigReqs The total number of configure requests, including vmpsInConfigErrors, that have been received by the VMPS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.53.1.1.2.1.2
vmpsInConfigErrors Then number of packets received by the VMPS but which were not correctly formatted configure requests.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.53.1.1.2.1.3
vmpsOutConfigFails The number of configure responses sent by this particular VMPS whose status was other than success.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.53.1.1.2.1.4
vmpsLastFailClient The MAC address of the VLAN client whose last configuration request was rejected. This MAC address will be for the VLAN client who was delivered the last configure response that caused the vmpsOutConfigFails object to …	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.53.1.1.2.1.5
vmpsOperStatus This object reflects the actual state of the VMPS which may differ from that of the vmpsAdminStatus object. This can occur when the configuration database fails to load but the corresponding vmpsAdminStatus is `active'…	Enumeration Enumerated Values: 1 active 2 inactive 3 loading	.1.3.6.1.4.1.9.9.53.1.1.2.1.6

A (conceptual) table utilized by a VMPS to map a MAC
address of a end station to a VLAN.

vmpsMacConfigEntry row .1.3.6.1.4.1.9.9.53.1.2.1.1

An entry (conceptual row) of a mapping between a MAC
address in utilization by an end station and a VLAN.

Indexes

vmpsIndex vmpsMacConfigAddress

Column	Syntax	OID
vmpsMacConfigAddress The MAC address of an end station to be associated with an VLAN.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.53.1.2.1.1.1
vmpsMacConfigVlan A VLAN that will be returned to an end station that provides the corresponding MAC address in a configuration request. A zero length string indicates that the corresponding MAC address is not permitted on any VLANs, inc…	VlanNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.53.1.2.1.1.2
vmpsMacConfigLastAccessed The value of sysUpTime when this entry was last used to map a MAC address to a VLAN name. Managers may opt to use this object to garbage collect entries that have not been used for a prolonged period of time.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.53.1.2.1.1.3
vmpsMacConfigLastRequestor The IP address of the device that requested the VLAN associated with the MAC of this row. The manager may use this object in an attempt to locate where a dynamic host currently resides.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.53.1.2.1.1.4
vmpsMacConfigLastRequestPortId The ID of the port included in the configuration request that corresponded to the designated entry in this table.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.53.1.2.1.1.5
vmpsMacConfigLastResponseStatus The value of the status field in the response for the last configure request for this MAC-address.	Enumeration Enumerated Values: 1 success 2 versionNotSupported 3 insufficientResources 4 accessDenied 5 portShutdown 6 unknownManagementDomain	.1.3.6.1.4.1.9.9.53.1.2.1.1.6
vmpsMacConfigStatus The row cannot be set to `active' until an appropriate value exists for vmpsMacConfigVlan.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.53.1.2.1.1.7

A list of VLANs with restricted access from dynamic
ports. This list takes the form of a group of VLANs  
and a group of ports permitted for those VLANs. If no
entry exists for a particular VLAN then there are no
restrictions as to what ports are allowed to access
that VLAN. If entries exist for a VLAN, then all ports
not explicitly permitted for that VLAN are denied
access (in the form of a failed configuration
response).

vmpsVlanConfigEntry row .1.3.6.1.4.1.9.9.53.1.2.2.1

An entry (conceptual row) in the vmpsVlanConfigTable.

Indexes

vmpsIndex vmpsVlanName vmpsDeviceId vmpsPortName

Column	Syntax	OID
vmpsVlanName The VLAN name associated with a group of ports which are allowed access to that VLAN dynamically.	VlanName Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.53.1.2.2.1.1
vmpsDeviceId The IP address of the device containing the permitted ports.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.53.1.2.2.1.2
vmpsPortName The ifName of the port on which dynamic access to the specified VLAN is allowed.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.53.1.2.2.1.3
vmpsVlanConfigStatus The status object associated with the conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.53.1.2.2.1.4