CISCO-VLAN-TRANSLATION-MIB Table View

This table contains the device based VLAN-to-VLAN
associations for all the device's physical ports.
The translation is applied in both ingress and egress
sides of all the Layer 2 trunks.  VLAN translation
makes the traffic arriving on the VLAN
cvtGlobalOriginalVlan on the trunk ports to be mapped
to or tagged with the VLAN cvtGlobalTranslatedVlan.
It also causes all the traffic internally tagged with
the VLAN cvtGlobalTranslatedVlan and leaving the
trunk ports to be tagged with VLAN
cvtGlobalOriginalVlan.
          
A global VLAN translation configuration is inactive for
those ports that are not Layer 2 trunks. 
          
The global VLAN translations are mutually exclusive to
the port based VLAN translations.  The rows in this
table can only be created when the table
cvtPortTranslationTable is empty.
          
A conceptual row is created for each VLAN mapping
configuration on the device which supports the feature.
The value of cvtGlobalTranslationMax determines the
maximum number of rows in this table.

cvtGlobalTranslationEntry row .1.3.6.1.4.1.9.9.411.1.1.2.1

Information about the VLAN translation for a
particular VLAN to a different VLAN.

Indexes

cvtGlobalOriginalVlan

Column	Syntax	OID
cvtGlobalOriginalVlan The VLAN translation is applied in both ingress and egress sides of all the Layer 2 trunks. It makes the traffic arriving on the VLAN with this VLAN ID to be mapped to or tagged with the corresponding instance of cv…	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.9.9.411.1.1.2.1.1
cvtGlobalTranslatedVlan The VLAN translation is applied in both ingress and egress sides of all the Layer 2 trunks. It makes the traffic arriving on the VLAN with the corresponding instance of cvtGlobalOriginalVlan on the device to be mapp…	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.9.9.411.1.1.2.1.2
cvtGlobalTranslationEffective Indicates whether this VLAN translation is functioning on the device.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.411.1.1.2.1.3
cvtGlobalTranslationStatus The status of the conceptual row for this global VLAN translation. Once a row becomes active, value in any other column within such row cannot be modified. When this object is set to create…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.411.1.1.2.1.4

This table contains information related to the port
based VLAN translation on the device.

cvtPortConfigEntry row .1.3.6.1.4.1.9.9.411.1.2.1.1

A set of configuration information regarding port
based VLAN translation.

An entry exists for every physical port which supports
VLAN translation feature.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cvtPortTranslationEnabled This object indicates whether the VLAN translation feature is enabled on the port. Setting this value to 'true' enables VLAN translation on the port. Setting this value to 'false' disables…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.411.1.2.1.1.1
cvtPortTranslationMax Maximum number of configurable VLAN translation entries allowed on the port. A value of zero indicates no limitation on the number of configurable VLANs which can be translated.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.411.1.2.1.1.2

This table contains the port based VLAN-to-VLAN
associations for the device's physical ports.
The translation is applied in both ingress and egress
sides of the layer 2 trunk on the port. It causes the 
traffic arriving on the VLAN cvtPortOriginalVlan on 
this port to be mapped to or tagged with the VLAN 
cvtPortTranslatedVlan. It also causes all the traffic 
internally tagged with the VLAN cvtPortTranslatedVlan 
and leaving the port to be tagged with VLAN 
cvtPortOriginalVlan.
          
A VLAN translation configuration that is applied to
Layer 2 ports that are not Layer 2 trunks is inactive.
          
The port based VLAN translations are mutually exclusive
to the global VLAN translations. The rows in this
table can only be created when the table
cvtGlobalTranslationTable is empty.
          
A conceptual row is created for a translation on a
particular physical port which supports the feature.
The value of the corresponding instance of
cvtPortTranslationMax determines the maximum number
of rows for the same port.
          
On some platforms, VLAN translation may be configured
per port group rather than per port.  If multiple ports
belong to a port group, the VLAN translation configured
to any of the ports in such group will apply to all
ports in the same group.

cvtPortTranslationEntry row .1.3.6.1.4.1.9.9.411.1.2.2.1

Entry containing VLAN translation Information for a
particular VLAN on a specific port.

The entry is created and deleted by using
cvtPortTranslationStatus.

Indexes

IF-MIBifIndex cvtPortOriginalVlan

Column	Syntax	OID
cvtPortOriginalVlan The VLAN translation is applied in both ingress and egress sides of the layer 2 trunk on the port. It makes the traffic arriving on the VLAN with this VLAN ID to be mapped to or tagged with the corresponding instance o…	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.9.9.411.1.2.2.1.1
cvtPortTranslatedVlan The VLAN translation is applied in both ingress and egress sides of the Layer 2 trunk on the port. It makes the traffic arriving on the VLAN with the corresponding instance of cvtPortOriginalVlan on the device to be ma…	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.9.9.411.1.2.2.1.2
cvtPortTranslationStatus The status of this conceptual row for the VLAN translation on the specific port. Once a row becomes active, value in any other column within such row cannot be modified. When this object is…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.411.1.2.2.1.3