CISCO-VISM-RSRC-PART-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
9

vismPortResPartCnfGrpTable

table
.1.3.6.1.4.1.351.110.5.5.2.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk vismPortResPartCnfGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VISM-RSRC-PART-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VISM-RSRC-PART-MIB::vismPortResPartCnfGrpTable' 
The vismPortResPartCnfGrpTable contains the
configuration of port resource partition.
Currently this table contains a single row.
vismPortResPartCnfGrpEntry row .1.3.6.1.4.1.351.110.5.5.2.2.1.1
An entry for port resource partition.
Indexes
Column Syntax OID
vismResPartPortNum
This is the index to vismPortResPartCnfGrpTable.
If PXM1(Processor Switch Module) is used on the
shelf this object should be set to 1. For PXM1E
this object should be set to 255.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.1
vismResPartCtrlrNum
This is index to vismPortResPartCnfGrpTable.
Enumeration
Enumerated Values:
1par
2pnni
3tag
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.2
vismResPartRowStatus
This will 'add', 'delete' or 'modify' the partition.

To delete an entry, this object has to be set to 'del'.
The resource partition can be deleted only after
deleting all the connections Logical Channel
N…
Enumerationr/w
Enumerated Values:
1add
2del
3mod
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.3
vismResPartNumOfLcnAvail
This represents number of LCNs available for this
controller and this port. The default value for this
object is chosen based on the object vismMode
(defined in CISCO-VISM-MODULE-MIB MIB) :
Integer32r/w
Constraints:
range: 0-380
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.4
vismResPartLcnLow
This represents low end of reserved LCN. The LCN
identifies the local VCI(Virtual Channel Identifier)
value on the VISM when adding a connection.
Integer32r/w
Constraints:
range: 131-510
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.5
vismResPartLcnHigh
This represents high end of reserved LCN. The LCN
identifies the local VCI value on the VISM when
adding a connection.
Integer32r/w
Constraints:
range: 131-510
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.6
vismResPartIngrPctBW
The percentage of total ingress bandwidth reserved.
Since we have only one LCN for VoIP(Voice Over IP),
the value is 100.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.7
vismResPartEgrPctBW
The percentage of total egress bandwidth reserved
Since we have only one LCN for VoIP, the value
is 100.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.8
vismResPartCtrlrID
This is the controller identifier of the PNNI
(Private Network to Network Interface) controller.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.9