CISCO-SWITCH-QOS-MIB Table View

This table contains the mapping of CoS values to DSCP values.
This mapping table consist of eight CoS values (0 through 7) and
their corresponding DSCP values. The mapping given by this table
is used for all packets received on an interface if and only if
that interface has a trust state, as given by the value of
csqIfTrustState for the interface, of 'trustCoS'.

This table contains the mapping of IP Precedence to DSCP.
This mapping table consist of eight IpPrecedence values
(0 through 7) and their corresponding DSCP values. The
mapping given by this table is used for all packets received
on an interface if and only if that interface has a trust state,
as given by the value of csqIfTrustState for the interface,
of 'trustIpPrec'.

This table contains the mapping of MPLS-EXP values to DSCP
values.  This mapping table consist of eight MPLS-EXP values
(0 through 7) and their corresponding DSCP values.

This table always has 64 entries, one for each DSCP value. The
table contains four mappings from the DSCP value assigned to
a packet. One mapping is to the egress CoS to be stored in the
layer-2 frame headers for output on 802.1Q or ISL interfaces.
Another mapping is to the EXP value to be stored in MPLS label.
The other two mappings are to the remarked (or 'marked down')
DSCP values which are used when a policer requires that 
a packet's DSCP value to be modified. Of these two mappings,
one is for a normal burst, and the other is for maximum burst.

This table indicates CoS mutation maps in the
device.

This table provides management information for CoS
mutation mapping. CoS mutation is applied to ingress
traffic. This mutation occurs before the CoS to
DSCP mapping for applicable traffic as specified in
csqCosToDscpTable.

This table indicates DSCP mutation maps in the
device.

This table provides management information for DSCP
mutation mapping. DSCP mutation is applied to egress
traffic. This mutation occurs after the mappings
specified in csqDscpMappingTable.

This table indicates EXP mutation maps in the
device.

This table provides management information for EXP
mutation mapping. EXP mutation is applied to egress
traffic. This mutation occurs after the mapping
specified in csqExpToDscpTable.

A table containing the mutation configuration for
mutation capable interface in the device. If a
mutation capable interface does not have a row
in this table, there is no mutation performed
at such interface.

This table provides QoS configuration for QoS manageable
interface in the device.

This table provides the information for and configuration of
assigning packets to queues and thresholds based on their CoS
value.

This table provides the information for and configuration of
assigning packets to queues and thresholds based on their DSCP
value and traffic direction.

This table maintains threshold parameters for the specified
queue number and threshold number of an interface.

A table containing configuration parameter for each queue on
a QOS managable interface.

A table used to configure the QoS mode for layer-2
interface.

A table used to configure the QoS-port attribute consistency
check for Port Channel interface identified by ifIndex.
QoS-port attribute consistency check consists of but not
limited to checking for members of a Port Channel interface
having the same queue type.

This table provides QoS group information for
QoS manageable interfaces in the device.

A table containing QoS statistics counters per QoS manageable
interface.

A table decribes QoS statistics counters per module that
is capable of providing this information. Such module is
identified by the entPhysicalIndex in ENTITY-MIB.

This table describes additional QoS statistics counters per
module that is capable of providing this information. Such
module is identified by the entPhysicalIndex in ENTITY-MIB.

A table containing QoS statistics counters per QoS manageable
interface.

A table containing QoS statistics counters on
QoS manageable interfaces.

A table contains the utilization of the buffer allocated for
a specific priority group on the ingress of the QoS manageable
interfaces.

A table contains the utilization of the shared service pool in
the system.

A table contains the utilization of the shared service pool 
for internal devices of a specific physical entity that is 
capable of providing this information.

This table contains the usage of policers in the device.

The table containing information of DSCP Rewrite Enable for
each module. Such module is identified by the entPhysicalIndex
in ENTITY-MIB. The value of each entry needs to be viewed 
in association with the global value, csqDscpRewriteEnable.