CISCO-STACKWISE-MIB Table View

This table contains information specific to switches in a
stack.  Every switch with an entry in the entPhysicalTable
(ENTITY-MIB) whose entPhysicalClass is 'chassis' will have
an entry in this table.

cswSwitchInfoEntry row .1.3.6.1.4.1.9.9.500.1.2.1.1

A conceptual row in the cswSwitchInfoTable describing
a switch information.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cswSwitchNumCurrent This object contains the current switch identification number. This number should match any logical labeling on the switch. For example, a switch whose interfaces are labeled 'interface #3' this value should be 3.	CswSwitchNumber Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.1
cswSwitchNumNextReload This object contains the cswSwitchNumCurrent to be used at next reload. The maximum value for this object is defined by the cswMaxSwitchNum object. Note: This object will contain 0 and cannot be set if t…	CswSwitchNumberOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.2
cswSwitchRole This object describes the function of the switch: master - stack master. member - active member of the stack. notMember - none-active stack member, see cswS…	Enumeration Enumerated Values: 1 master 2 member 3 notMember 4 standby	.1.3.6.1.4.1.9.9.500.1.2.1.1.3
cswSwitchSwPriority A number containing the priority of a switch. The switch with the highest priority will become the master. The maximum value for this object is defined by the cswMaxSwitchConfigPriority object. If after…	CswSwitchPriorityr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.4
cswSwitchHwPriority This object contains the hardware priority of a switch. If two or more entries in this table have the same cswSwitchSwPriority value during the master election time, the switch with the highest cswSwitchHwPriority will…	CswSwitchPriority Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.5
cswSwitchState The current state of a switch: waiting - Waiting for a limited time on other switches in the stack to come online. progressing - Master election or mismatch ch…	Enumeration Enumerated Values: 1 waiting 2 progressing 3 added 4 ready 5 sdmMismatch 6 verMismatch 7 featureMismatch 8 newMasterInit 9 provisioned 10 invalid 11 removed	.1.3.6.1.4.1.9.9.500.1.2.1.1.6
cswSwitchMacAddress The MAC address of the switch. Note: This object will contain the value of 0000:0000:0000 if the cswSwitchState value is other than 'ready'.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.500.1.2.1.1.7
cswSwitchSoftwareImage The software image type running on the switch. Note: This object will contain an empty string if the cswSwitchState value is other than 'ready'.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.500.1.2.1.1.8
cswSwitchPowerBudget This object indicates the power budget of the switch.	WattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.9
cswSwitchPowerCommited This object indicates the power committed to the POE devices connected to the switch.	WattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.10
cswSwitchSystemPowerPriority This specifies the system's power priority. In case of a power failure then the system with the highest system priority will be brought down last.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.11
cswSwitchPoeDevicesLowPriority This object specifies the priority of the system's low priority POE devices.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.12
cswSwitchPoeDevicesHighPriority This object specifies the priority of the system's high priority POE devices. In order to avoid losing the high priority POE devices before the low priority POE devices, this object's value must be greater than value …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.13
cswSwitchPowerAllocated This object indicates the power committed to the POE devices connected to the switch.	WattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.2.1.1.14

This table contains stackport specific information.  There
exists an entry in this table for every physical stack
port that have an entry in the ifTable (IF-MIB).

cswStackPortInfoEntry row .1.3.6.1.4.1.9.9.500.1.2.2.1

A conceptual row in the cswStackPortInfoTable. An entry
contains information about a stackport.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cswStackPortOperStatus The state of the stackport. up - Connected and operational. down - Not connected to a neighboring switch or administrative down. forcedDown - Shut …	Enumeration Enumerated Values: 1 up 2 down 3 forcedDown	.1.3.6.1.4.1.9.9.500.1.2.2.1.1
cswStackPortNeighbor This object contains the value of the entPhysicalIndex of the switch's chassis to which this stackport is connected to. If the stackport is not connected, the value 0 is returned.	CISCO-TCEntPhysicalIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.500.1.2.2.1.2

Distributed Stack Link Information.

cswDistrStackLinkInfoEntry row .1.3.6.1.4.1.9.9.500.1.2.3.1

An Entry containing information about DSL link.

Indexes

ENTITY-MIBentPhysicalIndex cswDSLindex

Column	Syntax	OID
cswDSLindex This is index of the distributed stack link with respect to each interface port	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.9.9.500.1.2.3.1.1
cswDistrStackLinkBundleOperStatus The state of the stackLink. up - Connected and operational. down - Not connected or administrative down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.500.1.2.3.1.2

This table contains  objects for Distributed stack
Link information Table.

cswDistrStackPhyPortInfoEntry row .1.3.6.1.4.1.9.9.500.1.2.4.1

An Entry containing information about stack port that
is part of Distributed Stack Link.

Indexes

ENTITY-MIBentPhysicalIndex cswDSLindex IF-MIBifIndex

Column	Syntax	OID
cswDistrStackPhyPort This object indicates the name of distributed stack port.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.500.1.2.4.1.1
cswDistrStackPhyPortOperStatus The state of the distributed stackport. up - Connected and operational. down - Not connected to a neighboring switch or administrative down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.500.1.2.4.1.2
cswDistrStackPhyPortNbr This object indicates the name of distributed stack port's neighbor.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.500.1.2.4.1.3
cswDistrStackPhyPortNbrsw This object indicates the EntPhysicalIndex of the distributed stack port's neigbor switch.	CISCO-TCEntPhysicalIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.500.1.2.4.1.4

This table holds the information about all the power stacks in
a single data stack.

cswStackPowerInfoEntry row .1.3.6.1.4.1.9.9.500.1.3.1.1

An entry in the cswStackPowerInfoTable for each of the power
stacks in a single data stack. This entry contains information
regarding the power stack.

Indexes

cswStackPowerStackNumber

Column	Syntax	OID
cswStackPowerStackNumber A unique value, greater than zero, to identify a power stack.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.3.1.1.1
cswStackPowerMode This object specifies the information about the mode of the power stack. Power-sharing mode: All of the input power can be used for loads, and the total available power appears as one huge power supply. The power budge…	CswPowerStackModer/w Type Values: 1 powerSharing 2 redundant 3 powerSharingStrict 4 redundantStrict	.1.3.6.1.4.1.9.9.500.1.3.1.1.2
cswStackPowerMasterMacAddress This object indicates the Mac address of the power stack master.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.500.1.3.1.1.3
cswStackPowerMasterSwitchNum This object indicates the switch number of the power stack master. The value of this object would be zero if the power stack master is not part of this data stack.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.3.1.1.4
cswStackPowerNumMembers This object indicates the number of members in the power stack.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.3.1.1.5
cswStackPowerType This object indicates the topology of the power stack, that is, whether the switch is running in RING or STAR topology.	CswPowerStackType Type Values: 1 ring 2 star	.1.3.6.1.4.1.9.9.500.1.3.1.1.6
cswStackPowerName This object specifies a unique name of this power stack. A zero-length string indicates no name is assigned.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.500.1.3.1.1.7

This table contains information about the stack power ports.
There exists an entry in this table for each physical stack
power port.

cswStackPowerPortInfoEntry row .1.3.6.1.4.1.9.9.500.1.3.2.1

A conceptual row in the cswStackPowerPortInfoTable. This entry
contains information about a power stack port.

Indexes

ENTITY-MIBentPhysicalIndex cswStackPowerPortIndex

Column	Syntax	OID
cswStackPowerPortIndex A unique value, greater than zero, for each stack power port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.3.2.1.1
cswStackPowerPortOperStatus This object is used to either set or unset the operational status of the stack port. This object will have following valid values, enabled(1) : The port is enabled disabled(2) : The port is force…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.9.500.1.3.2.1.2
cswStackPowerPortNeighborMacAddress This objects indicates the port neighbor's Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.500.1.3.2.1.3
cswStackPowerPortNeighborSwitchNum This objects indicates the port neighbor's switch number. If either there is no switch connected or the neighbor is not Jack-Jack then the value of this object is going to be 0.	CswSwitchNumberOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.3.2.1.4
cswStackPowerPortLinkStatus This object is used to describe the link status of the stack port. This object will have following valid values, up(1) : The port is connected and operational down(2): The port is either forced d…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.500.1.3.2.1.5
cswStackPowerPortOverCurrentThreshold This object is used to retrieve the over current threshold. The stack power cables are limited to carry current up to the limit retrieved by this object. The stack power cables would not be able to function properly if …	AmperesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.500.1.3.2.1.6
cswStackPowerPortName This object specifies a unique name of the stack power port as shown on the face plate of the system. A zero-length string indicates no name is assigned.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.500.1.3.2.1.7