CISCO-SNA-LLC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
127

llcPortAdminTable

table
.1.3.6.1.4.1.9.10.8.1.1.1 · 1 row entry · 16 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcPortAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcPortAdminTable' 
This table contains objects that can be
changed to manage an LLC port. Changing one
of these parameters may take effect in the
operating port immediately or may wait until
the interface is restarted depending on the
details of the implementation.
llcPortAdminEntry row .1.3.6.1.4.1.9.10.8.1.1.1.1
A list of configured values for an LLC port.
Indexes
Column Syntax OID
llcPortVirtualIndex
This value represents a virtual LLC port.
It is assigned by the agent.

This value is set to 0 by the agent for
interfaces identified by the ifIndex value
that do not support virtual interfaces.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.8.1.1.1.1.1
llcPortAdminName
An octet string that defines the virtual port
to which this interface is assigned. Its value
shall be unique within the administered
system. It must contain only ASCII printable
characters. A write operation shall no…
OctetStringr/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.9.10.8.1.1.1.1.2
llcPortAdminMaxSaps
This parameter specifies the maximum number of
SAPs that can be defined for this port.
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.1.1.3
llcPortAdminMaxCcs
This parameter specifies the maximum number of
connection components that can be
administratively defined for this port.
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.1.1.4
llcPortAdminMaxPDUOctets
This object denotes the default maximum I PDU
size, in octets, that LLCs on this port may
send to their remote LLC partners. This count
is referred to as 'N1' in the IEEE 802.2
specification [5].

This por…
octetsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.1.1.1.5
llcPortAdminMaxUnackedIPDUsSend
This object denotes the default maximum
consecutive unacknowledged I PDU frames that
LLCs on this port may send to their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [5].
…
Integer32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.9.10.8.1.1.1.1.6
llcPortAdminMaxUnackedIPDUsRcv
This object denotes the default maximum number
of unacknowledged I PDUs that LLCs on this port
can expect to receive from their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [5].
…
Integer32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.9.10.8.1.1.1.1.7
llcPortAdminMaxRetransmits
This object denotes the default value for the
maximum number of times which LLCs on this port
shall retry a PDU following the expiration of
the acknowledgement timer, the P-bit timer or
the reject timer. When these retr…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.1.1.1.8
llcPortAdminAckTimer
This object denotes the default value for the
time interval during which the LLCs on this port
shall expect to receive either:

1) an acknowledgement to one or more outstanding
I PDUs. or 2) a response PD…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.1.1.9
llcPortAdminPbitTimer
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive a PDU with the F
bit set to '1' in response to a Type 2 command
with the P bit set to '1'.
…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.1.1.10
llcPortAdminRejTimer
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive a reply to a REJ
PDU.

The expiration of this timer shall cause the
REJ PDU to be retr…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.1.1.11
llcPortAdminBusyTimer
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive an indication that
a busy condition at the remote LLC has
cleared.

The expiration of …
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.1.1.12
llcPortAdminInactTimer
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive any PDU from the
remote LLC. This function is not described in
the IEEE 802.2 specification [5]. I…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.1.1.13
llcPortAdminDelayAckCount
This object denotes the default value for the
maximum number of consecutive I PDUs which the
LLCs on this port shall receive during the
interval defined by llcCcOperDelayTimertime
without sending an immediate acknowledg…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.1.1.1.14
llcPortAdminDelayAckTimer
This object denotes the default value for the
time interval during which the LLCs on this
port shall delay acknowledgment of one or more
I PDUs (up to the value of
llcCcOperDelayAckCount). This function is not
described…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.1.1.15
llcPortAdminNw
This object denotes the default value for the
number of IPDUs that must be acknowledged
before the working window size (Ww) can be
incremented by 1 when the working window is not
equal to the maximum transmit window siz…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.1.1.1.16

llcPortOperTable

table
.1.3.6.1.4.1.9.10.8.1.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcPortOperTable' 
This table contains current LLC port
parameters. Many of these objects have
corresponding objects in the llcPortAdminTable.
llcPortOperEntry row .1.3.6.1.4.1.9.10.8.1.1.2.1
Currently set parameters for a specific LLC port.
Indexes
Column Syntax OID
llcPortOperMacAddress
This is the MAC Address for this local port.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.10.8.1.1.2.1.1
llcPortOperNumSaps
This object defines the number of SAPs on this
port that are currently enabled. In other
words, this object is a count of the number of
instances of llcSapOperEntry that have a
llcSapOperStatus value of 'active(2)'.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.2.1.2
llcPortOperHiWaterNumSaps
This object reflects the highest number of
SAPs active on this Port simultaneously. In other words,
this object is a count of the number of
instances of llcSapOperEntry on this Port.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.2.1.3
llcPortOperSimRim
This object reflects support for transmission
and receipt of SIM and RIM control frames for
this port.

SIM and RIM are not defined in the ANSI/IEEE
802.2 specification [5] nor in the IBM Token
Ring Archit…
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.9.10.8.1.1.2.1.4
llcPortOperLastModifyTime
This object describes the value of sysUpTime
when this port definition was last modified.
If the port has not been modified, then this
value shall be zero.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.8.1.1.2.1.5

llcPortStatsTable

table
.1.3.6.1.4.1.9.10.8.1.1.3 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcPortStatsTable' 
Each entry in this table contains statistics
for a specific LLC port.
llcPortStatsEntry row .1.3.6.1.4.1.9.10.8.1.1.3.1
A list of statistics for an LLC port.
Indexes
Column Syntax OID
llcPortStatsPDUsIn
This object reflects the total number of
PDUs that have been received on this port.
This object is initialized to zero when the
port is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.3.1.1
llcPortStatsPDUsOut
This object reflects the total number of
PDUs that have been transmitted on this port.
This object is initialized to zero when the port
is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.3.1.2
llcPortStatsOctetsIn
This object reflects the total octets received
on this port. This object is initialized to
zero when the port is created.
octetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.3.1.3
llcPortStatsOctetsOut
This object reflects the total octets
transmitted on this port. This object is
initialized to zero when the port is created.
octetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.3.1.4
llcPortStatsTESTCommandsIn
This object reflects the total number of
TEST commands received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.3.1.5
llcPortStatsTESTResponsesOut
This object reflects the total number of
TEST responses transmitted on this port
in response to TEST commands received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.3.1.6
llcPortStatsLocalBusies
This object reflects the total number of times
that the local connection components on this
port have entered a busy state (RNR). This
object is initialized to zero when the port is
created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.3.1.7
llcPortStatsUnknownSaps
This object reflects the total number of times
that a connection attempt, from a remote LLC
station, for an unknown SAP was detected on this
port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.1.3.1.8

llcSapAdminTable

table
.1.3.6.1.4.1.9.10.8.1.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcSapAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcSapAdminTable' 
This table contains objects that can be
changed to manage a local SAP. Changing one
of these parameters may take effect in the
operating CC immediately or may wait until the
interface is restarted depending on the details
of the implementation.
llcSapAdminEntry row .1.3.6.1.4.1.9.10.8.1.2.1.1
A list of configured values for a local SAP.
Indexes
Column Syntax OID
llcSapNumber
The address of this local SAP.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.10.8.1.2.1.1.1
llcSapAdminMaxPDUOctets
This object denotes the default maximum I PDU
size, in octets, that LLCs on this SAP may send
to their remote connection component partners.
This count is referred to as 'N1' in the IEEE
802.2 specification [5].
…
octetsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.2.1.1.2
llcSapAdminMaxUnackedIPDUsSend
This object denotes the default maximum
consecutive unacknowledged I PDU frames that
LLCs on this SAP may send to their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [5].
…
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.9.10.8.1.2.1.1.3
llcSapAdminMaxUnackedIPDUsRcv
This object denotes the default maximum number
of unacknowledged I PDUs that LLCs on this SAP
can expect to receive from their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [5].
…
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.9.10.8.1.2.1.1.4
llcSapAdminMaxRetransmits
This object denotes the default value for the
maximum number of times that LLCs on this SAP
shall retry PDUs following the expiration of
the acknowledgement timer, the P-bit timer or
the reject timer. When these retries…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.2.1.1.5
llcSapAdminAckTimer
This object denotes the default value for the
time interval during which the LLCs on this SAP
shall expect to receive either:

1) an acknowledgement to one or more
outstanding I PDUs. or 2) a response PDU…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.1.1.6
llcSapAdminPbitTimer
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive a PDU with the F
bit set to '1' in response to a Type 2 command
with the P bit set to '1'.
…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.1.1.7
llcSapAdminRejTimer
This object denotes the default value for the
time interval during which the LLCs on this SAP
shall expect to receive a reply to a REJ PDU.

The expiration of this timer shall cause the
REJ PDU to be retra…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.1.1.8
llcSapAdminBusyTimer
This object denotes the default value for the
time interval during which the LLCs on this SAP
shall expect to receive an indication that a
busy condition at the remote LLC has cleared.

The expiration of t…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.1.1.9
llcSapAdminInactTimer
This object denotes the default value for the
time interval during which the LLCs on this SAP
shall expect to receive any PDU from the remote
LLC. This function is not described in the
IEEE 802.2 specification [5] but …
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.1.1.10
llcSapAdminDelayAckCount
This object denotes the default value for the
maximum number of consecutive I PDUs which the
LLCs on this SAP shall receive during the
interval defined by llcCcOperDelayTimer without
sending an immediate acknowledgement…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.2.1.1.11
llcSapAdminDelayAckTimer
This object denotes the default value for the
time interval during which the LLCs on this SAP
shall delay acknowledgment of one or more I
PDUs (up to the value of
llcCcOperDelayAckCount). This function is not
described …
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.1.1.12
llcSapAdminNw
This object denotes the default value for the
number of IPDUs that must be acknowledged
before the working window size (Ww) can be
incremented by 1 when the working window is not
equal to the maximum transmit window siz…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.2.1.1.13

llcSapOperTable

table
.1.3.6.1.4.1.9.10.8.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcSapOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcSapOperTable' 
This table contains objects that reflect the
current operational parameters of a local SAP.
llcSapOperEntry row .1.3.6.1.4.1.9.10.8.1.2.2.1
A list of configured values for a local SAP.
Indexes
Column Syntax OID
llcSapOperStatus
This parameter describes the actual state of
this local SAP.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.9.10.8.1.2.2.1.1
llcSapOperNumCcs
This object defines the number of connection
components on this SAP that are currently in
one of the 'connected' states. In other words,
this object is a count of the number of
instances of llcCcOperEntry that have a
l…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.2.2.1.2
llcSapOperHiWaterNumCcs
This object reflects the highest number of
connection components on this SAP simultaneously in
one of the 'connected' states. In other words,
this object is a count of the number of
instances of llcCcOperEntry that ha…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.2.1.3
llcSapOperLlc2Support
This parameter describes whether or not the
LLC implementation supports LLC2 connection
components.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.9.10.8.1.2.2.1.4

llcSapStatsTable

table
.1.3.6.1.4.1.9.10.8.1.2.3 · 1 row entry · 32 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcSapStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcSapStatsTable' 
This table contains objects that reflect the
current operational parameters of a local SAP.
llcSapStatsEntry row .1.3.6.1.4.1.9.10.8.1.2.3.1
A list of configured values for a local SAP.
Indexes
Column Syntax OID
llcSapStatsLocalBusies
This object reflects the total number of times
that the local connection components on this
SAP have entered a busy state (RNR). This
object is initialized to zero when the SAP is
created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.1
llcSapStatsRemoteBusies
This object reflects the total number of
times that the adjacent (i.e. remote) connection
components on this SAP have entered a busy
state (RNR). This object is initialized to
zero when the SAP is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.2
llcSapStatsIFramesIn
This object reflects the total number of
I-Frames that have been received by connection
components on this SAP. This object is
initialized to zero when the SAP is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.3
llcSapStatsIFramesOut
This object reflects the total number of
I-Frames that have been transmitted by connection
components on this SAP. This object is
initialized to zero when the SAP is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.4
llcSapStatsIOctetsIn
This object reflects the total octets received
from adjacent connection components on this
SAP. This object covers the address, control,
and information field of I-Frames only. This
object is initialized to zero when …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.5
llcSapStatsIOctetsOut
This object reflects the total octets
transmitted to adjacent connection components
on this SAP. This object covers the address,
control, and information field of I-Frames
only. This object is initialized to zero when…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.6
llcSapStatsSFramesIn
This object reflects the total number of
S-Frames that have been received by connection
components on this SAP. This object is
initialized to zero when the SAP is created.
Note - the ratio of the number of I-Frames to…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.7
llcSapStatsSFramesOut
This object reflects the total number of
S-Frames that have been transmitted by connection
components on this SAP. This object is
initialized to zero when the SAP is created.

Note - the ratio of the numb…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.8
llcSapStatsRetransmitsOut
This object reflects the total number of
I-Frames retransmitted by all local connection
components on this SAP. This object is
initialized to zero when the SAP is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.9
llcSapStatsREJsIn
This object reflects the total REJ frames
received from all adjacent LLC connection
components on this SAP since it was created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.10
llcSapStatsREJsOut
This object reflects the total REJ frames
transmitted to an adjacent LLC connection
components on this SAP since it was created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.11
llcSapStatsWwCount
This object reflects the total number of
times, since this SAP was created, that the
dynamic window algorithm has been invoked to
reduce the value of Ww on any of the connection
components of this SAP. This object is
i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.12
llcSapStatsTESTCommandsIn
This object denotes the number of TEST
commands this SAP has received and is a measure
of the number of stations in the network trying
to connect up.

This object is initialized to zero when the SAP
is cre…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.13
llcSapStatsTESTCommandsOut
This object denotes the number of TEST
commands this SAP has sent and is a measure of
the number of other stations we are trying to
connect to.

This object is initialized to zero when the SAP
is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.14
llcSapStatsTESTResponsesIn
This object denotes the number of TEST
responses this SAP has received and is a
measure of the number of stations in the
network responding to TEST commands this SAP
has sent.

This object is initialized t…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.15
llcSapStatsTESTResponsesOut
This object denotes the number of TEST
responses this SAP has sent and is a measure of
the number of other stations trying to connect
to this SAP.

This object is initialized to zero when the SAP
is create…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.16
llcSapStatsXIDCommandsIn
This object denotes the number of XID commands
this SAP has received and is a measure of the
number of stations in the network trying to
connect to this SAP. This object is a count of
all XIDs, including SNA XID, IEEE …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.17
llcSapStatsXIDCommandsOut
This object denotes the number of XID commands
this SAP has sent and is a measure of the
number of other stations this SAP is trying to
connect to. This object is a count of all
XIDs, including SNA XID, IEEE XID, null …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.18
llcSapStatsXIDResponsesIn
This object denotes the number of XID
responses this SAP has received and is a
measure of the number of stations in the
network responding to TEST commands this SAP
has sent. This object is a count of all XIDs,
includi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.19
llcSapStatsXIDResponsesOut
This object denotes the number of XID
responses this SAP has sent and is a measure of
the number of other stations trying to connect
to this SAP. This object is a count of all
XIDs, including SNA XID, IEEE XID, null XI…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.20
llcSapStatsUIFramesIn
This object reflects the total number of
unnumbered information (UI) frames received on
a local SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.21
llcSapStatsUIFramesOut
This object reflects the total number of
unnumbered information (UI) frames sent on a
local SAP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.22
llcSapStatsUIOctetsIn
This object reflects the total octets received
from adjacent connection components on this
SAP. This object covers the address, control,
and information field of UI-Frames only. This
object is initialized to zero when…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.23
llcSapStatsUIOctetsOut
This object reflects the total octets
transmitted to adjacent connection components
on this SAP. This object covers the address,
control, and information field of UI-Frames
only. This object is initialized to zero whe…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.24
llcSapStatsConnectOk
This object reflects the total number of
successful connections that have been
established on this SAP since the SAP was
created.

A successful connection is indicated by a
successful SABME/UA exchange.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.25
llcSapStatsConnectFail
This object reflects the total number of
unsuccessful connections that have been
attempted on this SAP since the SAP was
created.

An unsuccessful connection attempt is indicated
by a SABME/DM exchange or …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.26
llcSapStatsDisconnect
This object reflects the total number of
normal disconnections that have been
performed on this SAP since the SAP was
created.

A normal disconnection is indicated by a
successful DISC/UA exchange or merel…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.27
llcSapStatsDisconnectFRMRSend
This object reflects the total number of
abnormal disconnections (resulting from a FRMR
being sent) that have been performed on this
SAP since the SAP was created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.28
llcSapStatsDisconnectFRMRRcv
This object reflects the total number of
abnormal disconnections (resulting from a FRMR
being received) that have been performed on
this SAP since the SAP was created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.29
llcSapStatsDisconnectTimer
This object reflects the total number of
abnormal disconnections (resulting from a timer
expiration) that have been performed on this
SAP since the SAP was created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.30
llcSapStatsDMsInABM
This object reflects the total number of
Disconnect Mode responses that have been
received for CCs in ABM mode on this SAP
since the SAP was created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.31
llcSapStatsSABMEsInABM
This object reflects the total number of
SABMEs that have been received for CCs in
already in ABM mode on this SAP since the SAP
was created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.2.3.1.32

llcCcAdminTable

table
.1.3.6.1.4.1.9.10.8.1.3.1 · 1 row entry · 16 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcCcAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcCcAdminTable' 
This table contains objects that can be
changed to manage an LLC connection component.
Changing one of these parameters may take
effect in the operating link immediately or may
wait until the link is restarted depending on
the details of the implementation.
          
The entries in llcCcAdminTable can be created
either by an agent or a management station. The
management station can create an entry in
llcCcAdminTable by setting the appropriate
value in llcCcAdminRowStatus.
          
Most of the objects in this read-create table
have corresponding read-only objects in the
llcCcOperTable that reflect the current
operating value.
          
The operating values may be different from
these configured values if changed by XID
negotiation or if a configured parameter was
changed after the link was started.
llcCcAdminEntry row .1.3.6.1.4.1.9.10.8.1.3.1.1
A list of configured values for an LLC connection
component.
Indexes
Column Syntax OID
llcCcRMac
This value is the remote MAC address for this
Connection Component. This value is provided
by the SNMP agent.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.10.8.1.3.1.1.1
llcCcRSap
This value is the address of the remote SAP
for this Connection Component. This value
is provided by the SNMP agent.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.10.8.1.3.1.1.2
llcCcAdminBounce
This object controls the resetting of the
connection component. Setting this value to
yes(2) results in the connection component
being reset, llcCcOperState transitioning to a
value of aDm(1), and the value of
llcCcAdm…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.9.10.8.1.3.1.1.3
llcCcAdminMaxPDUOctets
This object denotes the maximum I PDU size, in
octets, that this LLC SAP may send to its
remote connection component partner. This count
is referred to as 'N1' in the IEEE 802.2
specification [5].

This ob…
octetsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.1.1.4
llcCcAdminMaxUnackedIPDUsSend
This object denotes the maximum consecutive
unacknowledged I PDU frames that this LLC may
send to its remote LLC partner. This count is
referred to as 'k' in the IEEE 802.2
specification [5].

This object …
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.9.10.8.1.3.1.1.5
llcCcAdminMaxUnackedIPDUsRcv
This object denotes the maximum number of
unacknowledged I PDUs that this LLC can expect
to receive from its remote LLC partner. This
count is referred to as 'k' in the IEEE 802.2
specification [5].

This …
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.9.10.8.1.3.1.1.6
llcCcAdminMaxRetransmits
This object denotes the value for the maximum
number of times that this LLC shall retry PDUs
following the expiration of the acknowledgement
timer, the P-bit timer or the reject timer.
When these retries are exhausted, …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.1.1.7
llcCcAdminAckTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive either:

1) an acknowledgement to one or more
outstanding I PDUs. or 2) a response PDU to an
unnumbered co…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.1.1.8
llcCcAdminPbitTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive a PDU with the F bit set to '1' in
response to a Type 2 command with the P bit set
to '1'.

The expiration …
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.1.1.9
llcCcAdminRejTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive a reply to a REJ PDU.

The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 t…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.1.1.10
llcCcAdminBusyTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive an indication that a busy condition at
the remote LLC has cleared.

The expiration of this timer shall caus…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.1.1.11
llcCcAdminInactTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive any PDU from the remote LLC. This
function is not described in the IEEE 802.2
specification [5] but is widely implemente…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.1.1.12
llcCcAdminDelayAckCount
This object denotes the value for the maximum
number of consecutive I PDUs which this LLC
shall receive during the interval defined by
llcCcOperDelayTimer without sending an
immediate acknowledgement. This must be less…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.1.1.13
llcCcAdminDelayAckTimer
This object denotes the value for the time
interval during which this LLC shall delay
acknowledgment of one or more I PDUs (up to the
value of llcCcOperDelayAckCount). This function
is not described in the IEEE 802.2
sp…
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.1.1.14
llcCcAdminNw
This object denotes the value for the number
of IPDUs that must be acknowledged before the
working window size (Ww) can be incremented by
1 when the working window is not equal to the
maximum transmit window size (TW). …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.1.1.15
llcCcAdminRowStatus
This object is used by a management station to
create or delete the row entry in
llcCcAdminTable following the RowStatus textual
convention.

Upon successful creation of the row, an agent
automatically cre…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.8.1.3.1.1.16

llcCcOperTable

table
.1.3.6.1.4.1.9.10.8.1.3.2 · 1 row entry · 21 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcCcOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcCcOperTable' 
This table contains current LLC link
parameters.  Many of these objects have
corresponding objects in the
llcCcAdminTable.
llcCcOperEntry row .1.3.6.1.4.1.9.10.8.1.3.2.1
A list of status and control values for an
LLC connection component.
Indexes
Column Syntax OID
llcCcOperState
This object describes the operational state of
the LLC connection. If the connection component
is disabled, llcCcOperState will transition to
aDM(1). If the connection component is enabled,
llcCcOperState will transit…
Enumeration
Enumerated Values:
1aDM
2setup
3normal
4busy
5reject
6await
7awaitBusy
8awaitReject
9dConn
10reset
11error
12conn
13resetCheck
14resetWait
 .1.3.6.1.4.1.9.10.8.1.3.2.1.1
llcCcOperMaxIPDUOctetsSend
This object denotes the maximum I PDU size, in
octets, that this LLC SAP may send to its
remote connection component partner. This count
is referred to as 'N1' in the IEEE 802.2
specification [5].

At conn…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.2.1.2
llcCcOperMaxIPDUOctetsRcv
This object denotes the maximum I PDU size, in
octets, that this LLC can expect to receive
from its remote LLC partner. This count is
referred to as 'N1' in the IEEE 802.2
specification [5]

The I PDU size…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.2.1.3
llcCcOperMaxUnackedIPDUsSend
This object denotes the maximum consecutive
unacknowledged I PDU frames that this LLC may
send to its remote LLC partner. This count is
referred to as 'k' in the IEEE 802.2
specification [5].

At connectio…
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.9.10.8.1.3.2.1.4
llcCcOperMaxUnackedIPDUsRcv
This object denotes the maximum number of
unacknowledged I PDUs that this LLC can expect
to receive from its remote LLC partner. This
count is referred to as 'k' in the IEEE 802.2
specification [5].
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.9.10.8.1.3.2.1.5
llcCcOperMaxRetransmits
This object denotes the value for the maximum
number of times that this LLC shall retry PDUs
following the expiration of the acknowledgement
timer, the P-bit timer or the reject timer.
When these retries are exhausted, …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.2.1.6
llcCcOperAckTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive either:

1) an acknowledgement to one or more
outstanding I PDUs. or 2) a response PDU to an
unnumbered co…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.2.1.7
llcCcOperPbitTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive a PDU with the F bit set to '1' in
response to a Type 2 command with the P bit set
to '1'.

The expiration …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.2.1.8
llcCcOperRejTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive a reply to a REJ PDU.

The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 t…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.2.1.9
llcCcOperBusyTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive an indication that a busy condition at
the remote LLC has cleared.

The expiration of this timer shall caus…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.2.1.10
llcCcOperInactTimer
This object denotes the value for the time
interval during which this LLC shall expect to
receive any PDU from the remote LLC. This
function is not described in the IEEE 802.2
specification [5] but is widely implemente…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.2.1.11
llcCcOperDelayAckCount
This object denotes the value for the maximum
number of consecutive I PDUs which this LLC
shall receive during the interval defined by
llcCcOperDelayTimer without sending an
immediate acknowledgement. This must be less…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.2.1.12
llcCcOperDelayAckTimer
This object denotes the value for the time
interval during which this LLC shall delay
acknowledgment of one or more I PDUs (up to the
value of llcCcOperDelayAckCount). This function
is not described in the IEEE 802.2
sp…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.2.1.13
llcCcOperNw
This object denotes the value for the number
of IPDUs that must be acknowledged before the
working window size (Ww) can be incremented by
1 when the working window is not equal to the
maximum transmit window size (TW). …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.8.1.3.2.1.14
llcCcOperWw
Maximum number of sequentially numbered IPDUs
that the connection component may have
outstanding (unacknowledged) at any given time.
Ww is initialized to the value of
llcCcOperMaxUnackedIPDUsSend when the link is
establ…
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.9.10.8.1.3.2.1.15
llcCcOperCreateTime
This object describes the value of sysUpTime
when this connection was created.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.8.1.3.2.1.16
llcCcOperLastModifyTime
This object describes the value of sysUpTime
the last time this connection component was
modified. If the connection has not been
modified, then this value shall be zero.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.8.1.3.2.1.17
llcCcOperLastFailTime
This object describes the value of sysUpTime
when this LLC connection component last
failed. If the connection component has not failed,
then this value shall be zero.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.8.1.3.2.1.18
llcCcOperLastFailCause
This enumerated object reflects the cause of
the last failure of this LLC connection
component. If the connection component has not
failed, then this object will have a value of
undefined(1).
Enumeration
Enumerated Values:
1undefined
2rxFRMR
3txFRMR
4discReceived
5discSent
6retriesExpired
7forcedShutdown
 .1.3.6.1.4.1.9.10.8.1.3.2.1.19
llcCcOperLastFailFRMRInfo
This object reflects the information field of
the FRMR frame if the last failure for this LLC
connection component was as a result of an
invalid frame. Otherwise, this field has no
meaning.
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.9.10.8.1.3.2.1.20
llcCcOperLastWwCause
This object indicates the reason that the llcCcOperWw
was reduced the last time this occurred.
Enumeration
Enumerated Values:
1neverInvoked
2lostData
3macLayerCongestion
4other
 .1.3.6.1.4.1.9.10.8.1.3.2.1.21

llcCcStatsTable

table
.1.3.6.1.4.1.9.10.8.1.3.3 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk llcCcStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNA-LLC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNA-LLC-MIB::llcCcStatsTable' 
Each entry in this table contains statistics
for a specific LLC connection component.
llcCcStatsEntry row .1.3.6.1.4.1.9.10.8.1.3.3.1
A list of statistics for an LLC connection
component.
Indexes
Column Syntax OID
llcCcStatsLocalBusies
This object reflects the total number of times
that the local connection component has entered
a busy state (RNR). This object is initialized
to zero when the connection component is
created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.1
llcCcStatsRemoteBusies
This object reflects the total number of times
that the adjacent (i.e. remote) connection
component has entered a busy state (RNR). This
object is initialized to zero when the
connection component is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.2
llcCcStatsIFramesIn
This object reflects the total number of
I-Frames that have been received by the
connection component. This object is
initialized to zero when the connection
component is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.3
llcCcStatsIFramesOut
This object reflects the total number of
I-Frames that have been transmitted by this
connection component. This object is
initialized to zero when the connection
component is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.4
llcCcStatsIOctetsIn
This object reflects the total octets received
from the adjacent connection component. This
object covers the address, control, and
information field of I-Frames only. This
object is initialized to zero when the
conne…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.5
llcCcStatsIOctetsOut
This object reflects the total octets
transmitted to the adjacent connection
component. This object covers the address,
control, and information field of I-Frames
only. This object is initialized to zero when
the conn…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.6
llcCcStatsSFramesIn
This object reflects the total number of
S-Frames that have been received by this
connection component. This object is
initialized to zero when the connection
component is created.

Note - the ratio of th…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.7
llcCcStatsSFramesOut
This object reflects the total number of
S-Frames that have been transmitted by this
connection component. This object is
initialized to zero when the connection
component is created.

Note - the ratio of…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.8
llcCcStatsRetransmitsOut
This object reflects the total number of
I-Frames retransmitted the local connection
component. This object is initialized to zero
when the connection component is created.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.9
llcCcStatsREJsIn
This object reflects the total REJ frames
received from an adjacent LLC connection
component since connection component startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.10
llcCcStatsREJsOut
This object reflects the total REJ frames
transmitted to an adjacent LLC connection
component since connection component startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.11
llcCcStatsWwCount
This object reflects the total number of times, since
connection component startup, that the dynamic window
algorithm has been invoked to reduce the value of Ww.
At connection component startupm this object must be
init…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.8.1.3.3.1.12