CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
7
Rows
7
Columns
168
.1.3.6.1.4.1.9.9.657.1.1
·
1 row entry
·
2 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk csbCallStatsInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB::csbCallStatsInstanceTable'
The call stats instance table contains the physical index for each of the physical entity (line card, primary, secondary cards). The index of the table is instance index which uniquely identifies the physical entity present on the box.
A conceptual row in csbCallStatsInstanceTable. There is an
entry in this table for each SBC instance, as identified by a
value of csbCallStatsInstanceIndex.
entry in this table for each SBC instance, as identified by a
value of csbCallStatsInstanceIndex.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
This object uniquely identifies the sequence number of an
entity or slot that is configured per device. This index is assigned arbitrarily by the engine and is not saved over reboots. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.1.1.1 |
|
This object indicates the physical entity for which all the
measurements are maintained. The exact type of this entity is described by its entPhysicalVendorType value. |
CISCO-TCEntPhysicalIndexOrZero Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.9.9.657.1.1.1.2 |
csbCallStatsTable
table.1.3.6.1.4.1.9.9.657.1.2
·
1 row entry
·
26 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk csbCallStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB::csbCallStatsTable'
This table describes the global statistics information in the form of a table which contains call specific information like call rates, media flows, signaling flows etc. The index of the table is service index which corresponds to a particular service configured on the SBC and all the rows of the table represents the global information regarding all the call flows related to that particular service. The other index of this table is csbCallStatsInstanceIndex which is defined in csbCallStatsInstanceTable.
An conceptual row in the csbCallStatsGlobalStatsTable. There is
an entry in this table for the particular service configured on
SBC identified by a value of csbCallStatsInstanceIndex. The
other index of this table is cs…
an entry in this table for the particular service configured on
SBC identified by a value of csbCallStatsInstanceIndex. The
other index of this table is cs…
| Column | Syntax | OID |
|---|---|---|
|
This object identifies the index of the name of the SBC
service configured. This object also acts as an index for the table. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.1 |
|
This object indicates the configured name of the SBC service.
The length of this object is zero when value is not assigned to it. |
SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.657.1.2.1.2 |
|
This object indicates the maximum number of calls per second
processed by the Session Border Controller in past 24 hours. |
calls per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.3 |
|
This object indicates the average calls per second processed by
the Session Border Controller. |
calls per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.4 |
|
This object indicates the minimum calls per second in past 24
hours. |
calls per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.5 |
|
This object indicates the number of media flows which are
available. |
flowsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.6 |
|
This object indicates the number of media flows which are
used. This is for the flow allocated and connected. The flow allocated but not connected is not counted. |
flowsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.7 |
|
This object indicates the number of peak flows in SBC.
This is the highest recorded value for the active flows since the box was booted/reseted. |
flowsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.8 |
|
This object indicates the total number of media support by this
instance of SBC. The total number of flows include the available flows and the active flows. This value is since box was booted/reseted. Total flows includ… |
flowsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.9 |
|
This object indicates the number of active signaling flows for
signaling pinholes. |
signal flowsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.10 |
|
This object indicates the peak signaling flow in SBC.
This is the highest recorded value for the active signaling flows. This object is calculated using csbCallStatsUsedFlows. |
signal flowsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.11 |
|
This object indicates the maximum number of Signalling Flows
that can be supported by this instance of SBC. |
signal flowsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.12 |
|
This object indicates the remaining capacity that can be
supported by SBC. |
packets per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.13 |
|
This object indicates the number of unclassified packets
processed by SBC. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.2.1.14 |
|
This object indicates the total number of RTP packets sent.
|
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.2.1.15 |
|
This object indicates the total number of RTP packets
received. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.2.1.16 |
|
This object indicates the total number of RTP packets
discarded. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.2.1.17 |
|
This object indicates the number of RTP octets sent by the
SBC. |
octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.2.1.18 |
|
This object indicates the number of RTP octets received by
the SBC. |
octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.2.1.19 |
|
This object indicates the number of RTP octets discarded by
the SBC. |
octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.2.1.20 |
|
This object indicates the accumulated No media event
count. |
no media eventsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.21 |
|
This object indicates the accumulated route error event
count. This counter is for the route error of media stream. |
route error eventsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.22 |
|
This object indicates the number of additional transcoded flows
that this media gateway manager (MGM) entity is currently able to configure. |
flowsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.23 |
|
This object indicates the current number of transcoded
flows that are actively forwarding media traffic. In this context, a flow is a media stream passing through the device. So a single voice call will be counted only… |
flowsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.24 |
|
This object indicates the peak number of active transcoded
flows since the statistics were last reset. In this context, a flow is a media stream passing through the device, so a single voice call will be counted once. |
flowsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.25 |
|
This object indicates the accumulated total number of
transcoded flows. This count contains both active flows and flows that were allocated but never connected. In this context, a flow is a media stream passing throug… |
flowsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.2.1.26 |
.1.3.6.1.4.1.9.9.657.1.3
·
1 row entry
·
46 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk csbCurrPeriodicStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB::csbCurrPeriodicStatsTable'
This table is used to collect measurement over several
different intervals as defined by the
csbCurrPeriodicStatsInterval object. When a new interval starts
the objects associated with the interval are reset and count up
throughout the interval. The index of the table is the interval
for which the stats information is to be displayed. The interval
values can be 5 min, 15 mins, 1 hour and one day. The other
indices of this table are csbCallStatsInstanceIndex
defined in csbCallStatsInstanceTable and
csbCallStatsServiceIndex defined in csbCallStatsTable.
The gauge values are reported as :-
1.If the period being queried is current5mins, this is the value
at the instant that the query is issued.
2.Otherwise, for the other intevals, this is an average value
during the summary period sampled at 5 minute intervals.
An conceptual row in the csbCurrPeriodicStatsTable. There is
an entry in this table for the particular controller by a value
of csbH248StatsCtrlrIndex. The other indices of this table are
csbCallStatsInstanceIndex defin…
an entry in this table for the particular controller by a value
of csbH248StatsCtrlrIndex. The other indices of this table are
csbCallStatsInstanceIndex defin…
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This object identifies the interval for which the periodic
statistics information is to be displayed. The interval values can be 5 min, 15 mins, 1 hour , 1 Day. This object acts as index for the table. |
CiscoSbcPeriodicStatsInterval Type Values:
|
.1.3.6.1.4.1.9.9.657.1.3.1.1 |
||||||||
|
This object indicates the number of calls that have become
active during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.2 |
||||||||
|
This object indicates the number of calls that have become
activing during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.3 |
||||||||
|
This object indicates the number of calls that have become
deactiving during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.4 |
||||||||
|
This object indicates the number of total call attempts during
this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.5 |
||||||||
|
This object indicates the number of failed call attempts during
this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.6 |
||||||||
|
This object indicates the number of call setup failures due
to routing failures during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.7 |
||||||||
|
This object indicates the number of call setup failures due
to resource failures during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.8 |
||||||||
|
This object indicates the number of call setup failures due
to media failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.9 |
||||||||
|
This object indicates the number of call setup failures due
to signaling failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.10 |
||||||||
|
This object indicates the number of active call failures during
this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.11 |
||||||||
|
This object indicates the number of call setup failures due
to congestion during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.12 |
||||||||
|
This object indicates the number of call setup failures due
to policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.13 |
||||||||
|
This object indicates the number of call setup failures due
to NA policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.14 |
||||||||
|
This object indicates the number of call setup failures due
to routing policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.15 |
||||||||
|
This object indicates the number of call setup failures due
to CAC policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.16 |
||||||||
|
This object indicates the number of call setup failures due
to CAC call limit during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.17 |
||||||||
|
This object indicates the number of call setup failures due
to CAC call rate limit during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.18 |
||||||||
|
This object indicates the number of call setup failures due
to CAC bandwidth limit during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.19 |
||||||||
|
This object indicates the number of call setup failures due
to CAC media limit during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.20 |
||||||||
|
This object indicates the number of call update failure due
to policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.21 |
||||||||
|
This object indicates the current time at the start of each
interval. |
OctetString Constraints: range: 0-80 |
.1.3.6.1.4.1.9.9.657.1.3.1.22 |
||||||||
|
The object indicates the number of transcoded calls that are
active during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.23 |
||||||||
|
The object indicates the number of transrated calls that are
active during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.24 |
||||||||
|
This object indicates the total number of call update failures
during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.25 |
||||||||
|
This Object indicates the number of calls through SBC that use
IPv6 signaling. This statistic totals all calls that traverse an IPv6 adjacency on either or both sides of SBC during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.26 |
||||||||
|
This object indicates the number of calls through SBC that have
been identified as emergency calls (by Number Analysis) during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.27 |
||||||||
|
This object indicates the number of calls through SBC that have
been identified as emergency calls (by Number Analysis) and have used the e2 interface to obtain location information for the caller during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.28 |
||||||||
|
This object indicates the total number of active calls which
use IMS Rx, during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.29 |
||||||||
|
This object indicates the total call Setup failures owing to
IMS Rx failure during this interval. |
failuresSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.30 |
||||||||
|
This object indicates the total call renegotiation attempts
using IMS Rx during this interval. |
attemptsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.31 |
||||||||
|
This object indicates the total call renegotiation failures
owing to IMS Rx failure during this interval. |
failuresSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.32 |
||||||||
|
The number of active audio transcoded calls through
this adjacency or account during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.33 |
||||||||
|
This object indicates the the number of active fax
transcoded calls through this adjacency or account during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.34 |
||||||||
|
This object indicates the total call setup failures due to RTP
being proposed when not permitted during this interval. |
failuresSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.35 |
||||||||
|
This object indicates the total call setup failures due to SRTP
being proposed when not permitted during this interval. |
failuresSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.36 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account which do not use SRTP on any media channels during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.37 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account that have one or more media channels which use SRTP. This count does not include media channels that provide interworking between RTP a… |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.38 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account that have one or more media channels that provide interworking between RTP and SRTP during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.39 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account for which DTMF interworking is enabled between DTMF in signaling and DTMF in media via RFC 2833 during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.40 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account for which DTMF interworking is enabled between DTMF in signaling and DTMF in media via inband DTMF tones during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.41 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account for which DTMF interworking is enabled between DTMF in media via RFC 2833 and DTMF in media via inband DTMF tones during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.42 |
||||||||
|
This object indicates the lawful intercept tap attempts
requested within the scope of this query during this interval. |
attemptsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.43 |
||||||||
|
This object indicates the lawful intercept tap attempts that
have been successfully implemented within the scope of this query during this interval. |
successSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.44 |
||||||||
|
This object indicates the Lawful intercept taps currently in
place on calls within the scope of this query during this interval. |
tapsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.45 |
||||||||
|
The number of active calls on this adjacency or account which
are to or from registered subscribers using IPSEC during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.3.1.46 |
csbHistoryStatsTable
table.1.3.6.1.4.1.9.9.657.1.4
·
1 row entry
·
45 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk csbHistoryStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB::csbHistoryStatsTable'
This table provide historical measurement in various interval
length defined by the csbHistoryStatsInterval object. Each
interval may contain one or more entries to allow for detailed
measurment to be collected. It is up to the platform to
determine the number of intervals to be supported like
5 minutes, 15 minutes, 1 hour and 1 day. In addition, the number
of
historical entries is also determined by the platform
resources.
The gauge values are reported as:
If the period being queried is previous5mins, this is the number
of calls that were active at the end of the previous 5 minute
period. Otherwise for the other intevals, this is an average
value during the summary period, sampled at 5 minute intervals.
A conceptual row in the csbHistoryStatsTable. The entries in
this table are updated as interval completes in the
csbCurrPeriodicStatsTable table and the data is moved from that
table to this one.
this table are updated as interval completes in the
csbCurrPeriodicStatsTable table and the data is moved from that
table to this one.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This object identifies the interval for which the history
statistics information is to be displayed. The interval values can be 5 min, 15 mins, 1 hour , 1 day. This object acts as index for the table. |
CiscoSbcPeriodicStatsInterval Type Values:
|
.1.3.6.1.4.1.9.9.657.1.4.1.1 |
||||||||
|
The platform assigns a number starting with one and
increments it each for each new row. When the maximum number of row is reached the oldest rows are deleted. It is up to the platform to determine the number o… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.2 |
||||||||
|
This object indicates the number of active calls history during
this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.3 |
||||||||
|
This object indicates the number of total call attempts history
during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.4 |
||||||||
|
This object indicates the number of failed call attempts during
this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.5 |
||||||||
|
This object indicates the number of call setup failures due
to routing failures during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.6 |
||||||||
|
This object indicates the number of call setup failures due
to resource failures during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.7 |
||||||||
|
This object indicates the number of call setup failures due
to media failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.8 |
||||||||
|
This object indicates the number of call setup failures due
to signaling failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.9 |
||||||||
|
This object indicates the number of active call failures during
this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.10 |
||||||||
|
This object indicates the number of call setup failures due
to congestion during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.11 |
||||||||
|
This object indicates the number of call setup failures due
to some policy violations during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.12 |
||||||||
|
This object indicates the number of call setup failures due
to NA policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.13 |
||||||||
|
This object indicates the number of call setup failures due
to routing policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.14 |
||||||||
|
This object indicates the number of call setup failures due
to CAC policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.15 |
||||||||
|
This object indicates the number of call setup failures due
to CAC call limit during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.16 |
||||||||
|
This object indicates the number of call setup failures due
to CAC call rate limit during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.17 |
||||||||
|
This object indicates the number of call setup failures due
to CAC bandwidth limit during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.18 |
||||||||
|
This object indicates the number of call setup failures due
to CAC media limit during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.19 |
||||||||
|
This object indicates the number of call update failure due
to policy failure during this interval. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.20 |
||||||||
|
This object indicates the time at the start of the interval
when measurements were first collected for this interval in the csbCurrPeriodicStatsTable. |
OctetString Constraints: range: 0-80 |
.1.3.6.1.4.1.9.9.657.1.4.1.21 |
||||||||
|
The object indicates the number of active transcoded
calls during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.22 |
||||||||
|
The object indicates the number of active transrated
calls during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.23 |
||||||||
|
This object indicates the total call update failures during
this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.24 |
||||||||
|
This Object indicates the number of calls through SBC that use
IPv6 signaling. This statistic totals all calls that traverse an IPv6 adjacency on either or both sides of SBC during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.25 |
||||||||
|
This object indicates the number of calls through SBC that have
been identified as emergency calls (by Number Analysis) during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.26 |
||||||||
|
This object indicates the number of calls through SBC that have
been identified as emergency calls (by Number Analysis) and have used the e2 interface to obtain location information for the caller. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.27 |
||||||||
|
This object indicates the total number of active calls which
use IMS Rx, during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.28 |
||||||||
|
This object indicates the total call setup failures owing to
IMS Rx failure during this interval. |
failuresSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.29 |
||||||||
|
This object indicates the total call renegotiation attempts
using IMS Rx during this interval. |
attemptsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.30 |
||||||||
|
This object indicates the total call renegotiation failures
owing to IMS Rx failure during this interval. |
failuresSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.31 |
||||||||
|
The number of active audio transcoded calls through
this adjacency or account during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.32 |
||||||||
|
This object indicates the the number of active fax
transcoded calls through this adjacency or account during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.33 |
||||||||
|
This object indicates the total call setup failures due to RTP
being proposed when not permitted during this interval. |
failuresSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.34 |
||||||||
|
This object indicates the total call setup failures due to SRTP
being proposed when not permitted during this interval. |
failuresSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.35 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account which do not use SRTP on any media channels during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.36 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account that have one or more media channels that use SRTP but no media channels that provide interworking between RTP and SRTP during this inte… |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.37 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account that have one or more media channels that provide interworking between RTP and SRTP during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.38 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account for which DTMF interworking is enabled between DTMF in signaling and DTMF in media via RFC 2833 during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.39 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account for which DTMF interworking is enabled between DTMF in signaling and DTMF in media via inband DTMF tones during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.40 |
||||||||
|
This object indicates the number of active calls
through this adjacency or account for which DTMF interworking is enabled between DTMF in media via RFC 2833 and DTMF in media via inband DTMF tones during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.41 |
||||||||
|
This object indicates the lawful intercept tap attempts
requested within the scope of this query during this interval. |
attemptsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.42 |
||||||||
|
This object indicates the lawful intercept tap attempts that
have been successfully implemented within the scope of this query during this interval. |
successSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.43 |
||||||||
|
This object indicates the Lawful intercept taps currently in
place on calls within the scope of this query during this interval. |
tapsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.44 |
||||||||
|
The number of active calls on this adjacency or account which
are to or from registered subscribers using IPSEC during this interval. |
callsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.4.1.45 |
csbPerFlowStatsTable
table.1.3.6.1.4.1.9.9.657.1.5
·
1 row entry
·
21 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk csbPerFlowStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB::csbPerFlowStatsTable'
This table describes statistics table for each call flow. The indices of the table are virtual media gateway id, gate id, falow pair id and side id (indices for side A or side B). The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable.
An conceptual row in the csbPerFlowStatsTable. There is
an entry in this table for vdbe Id, gate id, flow pair id and
side id. The other indices of this table are
csbCallStatsInstanceIndex defined in csbCallStatsInstanc…
an entry in this table for vdbe Id, gate id, flow pair id and
side id. The other indices of this table are
csbCallStatsInstanceIndex defined in csbCallStatsInstanc…
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This object identifies the virtual media gateway id. This
object also acts as an index for the table. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.9.9.657.1.5.1.1 |
||||
|
This object identifies the gate id. This object also acts as
an index for the table. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.9.9.657.1.5.1.2 |
||||
|
This object identifies the flow pair id. This object also acts
as an index for the table. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.9.9.657.1.5.1.3 |
||||
|
This object identifies the index corresponding to side of flow
pair either side A or side B. This object also acts as an index for the table. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.657.1.5.1.4 |
||||
|
This object indicates the type of the flow, like media flow,
signaling flow etc. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.657.1.5.1.5 |
||||
|
This object indicates the number of RTP packets sent per flow
by the SBC. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.6 |
||||
|
This object indicates the number of RTP packets received per
flow by the SBC. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.7 |
||||
|
This object indicates the number of RTP packets discarded per
flow by the SBC. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.8 |
||||
|
This object indicates the number of RTP octets sent
per flow by the SBC. |
octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.9 |
||||
|
This object indicates the number of RTP octets received
per flow by the SBC. |
octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.10 |
||||
|
This object indicates the number of RTP octets discarded
per flow by the SBC. |
octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.11 |
||||
|
The number of RTP packets sent by the remote end point to this
MG on this flow. Comparing this with the local number of RTP packets received from the remote end point gives an indication of how many incoming packets we… |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.12 |
||||
|
The number of RTP packets received by the remote end point from
this MG on this flow. Comparing this with the local number of RTP packets sent from this MG to the remote endpoint gives an indication of how many outgoing… |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.13 |
||||
|
The number of RTP packets reported as lost by the remote end
point on this flow. This information is from RTCP packet. Not all endpoints report this statistic, if it is not available it will be set to zero. This statist… |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.14 |
||||
|
This object indicates the End Point jitter per flow in the
SBC. |
millisecondsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.15 |
||||
|
This object indicates the maximum burst size for the
current FlowPair. |
bytesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.5.1.16 |
||||
|
This object indicates the bandwidth reserved for flow in
kilobytes/second. |
kilobytes per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.5.1.17 |
||||
|
This object indicates the mark packets sent for the
current FlowPair with, or zero if none set. The DSCP is a 6-bit value, which will be present in the top 6 bits of the lowest byte of this field. |
SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.657.1.5.1.18 |
||||
|
This object indicates whether the flow on the current
FlowPair has subscribed for the NAT latch event. |
OctetString Constraints: range: 0-10 |
.1.3.6.1.4.1.9.9.657.1.5.1.19 |
||||
|
This object indicates the flow on the current FlowPair has
subscribed for the media loss event. |
OctetString Constraints: range: 0-10 |
.1.3.6.1.4.1.9.9.657.1.5.1.20 |
||||
|
This object indicates the number of RTP packets lost per flow
by the SBC. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.657.1.5.1.21 |
.1.3.6.1.4.1.9.9.657.1.6
·
1 row entry
·
14 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk csbH248StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB::csbH248StatsTable'
This table describes the H.248 statistics for SBC. The index of the table is service index which corresponds to a particular service configured on the SBC and the index assigned to a particular H.248 controller. The other index of this table is csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable. This table is replaced by the csbH248StatsRev1Table.
An conceptual row in the csbCallStath248Table. There is
an entry in this table for the particular controller by a value
of csbH248StatsCtrlrIndex. The other indices of this table are
csbCallStatsInstanceIndex defined in…
an entry in this table for the particular controller by a value
of csbH248StatsCtrlrIndex. The other indices of this table are
csbCallStatsInstanceIndex defined in…
| Column | Syntax | OID |
|---|---|---|
|
csbH248StatsCtrlrIndexdeprecated
This object identifies the controller index of the H.248
server. This is also the index for the table. |
Integer32 Constraints: range: 1-50 |
.1.3.6.1.4.1.9.9.657.1.6.1.1 |
|
csbH248StatsRequestsSentdeprecated
This object indicates the requests sent through the Session
Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.2 |
|
csbH248StatsRequestsRcvddeprecated
This object indicates the requests received through the
Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.3 |
|
csbH248StatsRequestsFaileddeprecated
This object indicates the requests failed on session
Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.4 |
|
csbH248StatsRequestsRetrieddeprecated
This object indicates the requests retried through the Session
Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.5 |
|
csbH248StatsRepliesSentdeprecated
This object indicates the number of replies sent through the
Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.6 |
|
csbH248StatsRepliesRcvddeprecated
This object indicates the number of replies received from the
Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.7 |
|
csbH248StatsRepliesRetrieddeprecated
This object indicates the number of replies retried through
the Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.8 |
|
csbH248StatsSegPktsSentdeprecated
This object indicates the number of packets sent through the
Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.9 |
|
csbH248StatsSegPktsRcvddeprecated
This object indicates the number of packets received from the
Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.10 |
|
csbH248StatsEstablishedTimedeprecated
This object indicates the H.248 Controller established
time (the time at which the association became established). |
OctetString Constraints: range: 0-80 |
.1.3.6.1.4.1.9.9.657.1.6.1.11 |
|
csbH248StatsTMaxTimeoutValdeprecated
This object indicates the T-Max timeout value. This field
specifies the maximum delay (in milliseconds) for a response from an MGC before deciding that the request has failed. |
millisecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.9.657.1.6.1.12 |
|
csbH248StatsRTTdeprecated
This object indicates the calculated RTT value. This field
specifies the maximum round trip propagation delay in the network (in milliseconds). |
millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.13 |
|
csbH248StatsLTdeprecated
This object indicates the LT value calculated from RTT
value and Max timeout value. This field specifies the maximum delay (in milliseconds) for a response from an MGC plus the maximum round trip propagation delay in th… |
millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.6.1.14 |
csbH248StatsRev1Table
table.1.3.6.1.4.1.9.9.657.1.7
·
1 row entry
·
14 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk csbH248StatsRev1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB::csbH248StatsRev1Table'
This table describes the H.248 statistics for SBC. The index of the table is service index which corresponds to a particular service configured on the SBC and the index assigned to a particular H.248 controller. The other index of this table is csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable.
An conceptual row in the csbCallStath248Table. There is
an entry in this table for the particular Vdbe by a value
of csbH248StatsVdbeId. The other indices of this table are
csbCallStatsInstanceIndex defined in csbCallSt…
an entry in this table for the particular Vdbe by a value
of csbH248StatsVdbeId. The other indices of this table are
csbCallStatsInstanceIndex defined in csbCallSt…
| Column | Syntax | OID |
|---|---|---|
|
This object identifies the virtual media gateway id. This is
also the index for the table. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.9.9.657.1.7.1.1 |
|
This object indicates the requests sent through the Session
Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.2 |
|
This object indicates the requests received through the
Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.3 |
|
This object indicates the requests failed on session
Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.4 |
|
This object indicates the requests retried through the Session
Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.5 |
|
This object indicates the number of replies sent through the
Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.6 |
|
This object indicates the number of replies received from the
Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.7 |
|
This object indicates the number of replies retried through
the Session Controller Interface to an SBE or DBE. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.8 |
|
This object indicates the number of response segments sent by
DBE. This field will only be present if segmentation is enabled on this association. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.9 |
|
This object indicates the number of response segments received
by DBE. This field will only be present if segmentation is enabled on this association. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.10 |
|
This object indicates the H.248 Controller established
time (the time at which the association became established). |
OctetString Constraints: range: 0-80 |
.1.3.6.1.4.1.9.9.657.1.7.1.11 |
|
This object indicates the T-Max timeout value. This field
specifies the maximum delay (in milliseconds) for a response from an MGC before deciding that the request has failed. |
millisecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.9.657.1.7.1.12 |
|
This object indicates the calculated RTT value. This field
specifies the maximum round trip propagation delay in the network (in milliseconds). |
millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.13 |
|
This object indicates the LT value calculated from RTT
value and Max timeout value. This field specifies the maximum delay (in milliseconds) for a response from an MGC plus the maximum round trip propagation delay in th… |
millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.657.1.7.1.14 |