CISCO-QP-LBG-MIB

        This MIB module represents the Qam-Partition (QP) and Load
Balance Group (LBG) parameters in  the headend and it is 
supported by an snmp agent. It defines objects for managing 
both QP and LBG.
    
Source file
CISCO-QP-LBG-MIB
Last revised
Identity
ciscoQpLbgMIB
Base OID
1.3.6.1.4.1.9.9.824
Imported Objects
CISCO-SMI ciscoMgmt
ENTITY-MIB entPhysicalIndex
IF-MIB ifDescr
INET-ADDRESS-MIB InetAddress InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC MacAddress TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-QP-LBG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-QP-LBG-MIB::ciscoQpLbgMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-QP-LBG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-QP-LBG-MIB::ciscoQpLbgMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (58)
.1.3.6.1.4.1.9.9.824
.1.3.6.1.4.1.9.9.824.0
.1.3.6.1.4.1.9.9.824.1
.1.3.6.1.4.1.9.9.824.1.1
.1.3.6.1.4.1.9.9.824.1.1.1
.1.3.6.1.4.1.9.9.824.1.1.1.1
Enumeration
.1.3.6.1.4.1.9.9.824.1.1.1.10
.1.3.6.1.4.1.9.9.824.1.1.1.11
.1.3.6.1.4.1.9.9.824.1.1.1.12
.1.3.6.1.4.1.9.9.824.1.1.1.13
OctetString
.1.3.6.1.4.1.9.9.824.1.1.1.14
.1.3.6.1.4.1.9.9.824.1.1.1.15
OctetString
.1.3.6.1.4.1.9.9.824.1.1.1.16
OctetString
.1.3.6.1.4.1.9.9.824.1.1.1.17
OctetString
.1.3.6.1.4.1.9.9.824.1.1.1.18
.1.3.6.1.4.1.9.9.824.1.1.1.19
.1.3.6.1.4.1.9.9.824.1.1.1.2
.1.3.6.1.4.1.9.9.824.1.1.1.20
.1.3.6.1.4.1.9.9.824.1.1.1.21
.1.3.6.1.4.1.9.9.824.1.1.1.22
.1.3.6.1.4.1.9.9.824.1.1.1.23
.1.3.6.1.4.1.9.9.824.1.1.1.24
.1.3.6.1.4.1.9.9.824.1.1.1.25
.1.3.6.1.4.1.9.9.824.1.1.1.26
OctetString
.1.3.6.1.4.1.9.9.824.1.1.1.27
.1.3.6.1.4.1.9.9.824.1.1.1.3
.1.3.6.1.4.1.9.9.824.1.1.1.4
.1.3.6.1.4.1.9.9.824.1.1.1.5
.1.3.6.1.4.1.9.9.824.1.1.1.6
Enumeration
.1.3.6.1.4.1.9.9.824.1.1.1.7
Enumeration
.1.3.6.1.4.1.9.9.824.1.1.1.8
.1.3.6.1.4.1.9.9.824.1.1.1.9
.1.3.6.1.4.1.9.9.824.1.2
.1.3.6.1.4.1.9.9.824.1.2.1
.1.3.6.1.4.1.9.9.824.1.2.1.1
.1.3.6.1.4.1.9.9.824.1.2.1.2
.1.3.6.1.4.1.9.9.824.1.2.1.3
.1.3.6.1.4.1.9.9.824.1.2.1.4
.1.3.6.1.4.1.9.9.824.1.2.1.5
.1.3.6.1.4.1.9.9.824.1.3
.1.3.6.1.4.1.9.9.824.1.3.1
.1.3.6.1.4.1.9.9.824.1.3.1.1
.1.3.6.1.4.1.9.9.824.1.3.1.10
.1.3.6.1.4.1.9.9.824.1.3.1.2
.1.3.6.1.4.1.9.9.824.1.3.1.3
.1.3.6.1.4.1.9.9.824.1.3.1.4
.1.3.6.1.4.1.9.9.824.1.3.1.5
.1.3.6.1.4.1.9.9.824.1.3.1.6
.1.3.6.1.4.1.9.9.824.1.3.1.7
.1.3.6.1.4.1.9.9.824.1.3.1.8
.1.3.6.1.4.1.9.9.824.1.3.1.9
.1.3.6.1.4.1.9.9.824.1.4
.1.3.6.1.4.1.9.9.824.1.5
.1.3.6.1.4.1.9.9.824.1.6
.1.3.6.1.4.1.9.9.824.1.7
.1.3.6.1.4.1.9.9.824.2
.1.3.6.1.4.1.9.9.824.2.1
.1.3.6.1.4.1.9.9.824.2.2
Dependencies (12) 7 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (9)
A collection of QP notifications that may
optionally be implemented.
cqlciscoQpNotifsGroup object is
superseded by cqlciscoQpNotifsGroup1.
.1.3.6.1.4.1.9.9.824.2.2.1
A collection of LBG notifications
that may optionally be implemented.
.1.3.6.1.4.1.9.9.824.2.2.2
A collection of objects providing information
about the QP parameters.
cqlciscoQpObjectGroup object is
superseded by cqlciscoQpObjectGroup1.
.1.3.6.1.4.1.9.9.824.2.2.3
A collection of objects providing
information about the LBG parameters.
.1.3.6.1.4.1.9.9.824.2.2.4
A collection of objects providing information about the LBG
route parameters.
.1.3.6.1.4.1.9.9.824.2.2.5
A collection of objects providing information
about the notification enables.
cqlciscoQpLbgNotifsControlGroup object is
superseded by cqlciscoQpLbgNotifsControlGroup1.
.1.3.6.1.4.1.9.9.824.2.2.6
A collection of QP notifications that may
optionally be implemented.
.1.3.6.1.4.1.9.9.824.2.2.7
A collection of objects providing information
about the QP parameters.
.1.3.6.1.4.1.9.9.824.2.2.8
A collection of objects providing information
about the notification enables.
.1.3.6.1.4.1.9.9.824.2.2.9
Compliance Statements (2)

OID .1.3.6.1.4.1.9.9.824.2.1.1
These objects describe the support level
for QP and LBG.
Required groups
mandatory cqlciscoLbgRouteObjectGroup
optional cqlciscoQpNotifsGroup The cqlciscoQpNotifsGroup is unconditionally
optional.
optional cqlciscoQpObjectGroup The cqlciscoQpObjectGroup is unconditionally
optional.
optional cqlciscoQpLbgNotifsControlGroup The cqlciscoQpLbgNotifsControlGroup is unconditionally
optional.
optional cqlciscoLbgNotifsGroup The cqlciscoLbgNotifsGroup is uncondionally
optional.
optional cqlciscoLbgObjectGroup The cqlciscoLbgObjectGroup is unconditionally
optional.

OID .1.3.6.1.4.1.9.9.824.2.1.2
These objects describe the support level
for QP and LBG.
Required groups
mandatory cqlciscoLbgRouteObjectGroup
optional cqlciscoLbgNotifsGroup The cqlciscoLBGNotifsGroup is unconditionally
optional
optional cqlciscoLbgObjectGroup The cqlciscoLbgObjectGroup is unconditionally
optional.
optional cqlciscoQpNotifsGroup1 The cqlciscoQpNotifsGroup1 is unconditionally
optional.
optional cqlciscoQpObjectGroup1 The cqlciscoQpObjectGroup1 is unconditionally
optional.
optional cqlciscoQpLbgNotifsControlGroup1 The cqlciscoQpLbgNotifsControlGroup1 is unconditionally
optional.
Notifications / Traps (6)
NameOIDDescription
.1.3.6.1.4.1.9.9.824.0.1
The device generates this notification when a QP state
has changed and the value of cqlQpNotifyEnable is 'true'.
.1.3.6.1.4.1.9.9.824.0.2
The device generates this notification when a qam has
been added to QP and the value of cqlQamNotifyEnable
is 'true'.
.1.3.6.1.4.1.9.9.824.0.3
The device generates this notification when a qam has
been deleted from QP and the value of cqlQamNotifyEnable
is 'true'.
.1.3.6.1.4.1.9.9.824.0.4
The device generates this notification when a route has
been added to QP and the value of cqlRouteNotifyEnable
is 'true'.
.1.3.6.1.4.1.9.9.824.0.5
The device generates this notification when a route has been
deleted from QP and the value of cqlRouteNotifyEnable is
'true'.
.1.3.6.1.4.1.9.9.824.0.6
The device generates this notification when a qam
has been oversubscribed or cleared. This will be
enabled when the object cqlQamOverSubscribedEnable
is set to 'true'.