Standard view Table view

CISCO-QINQ-VLAN-MIB

        This MIB defines configuration and monitoring capabilities
relating to 802.1QinQ interfaces.  QinQ interfaces are capable
of terminating QinQ traffic and translating QinQ tags.
        
IEEE 802.1Q VLAN specification provides for an option to tag
Ethernet frames with two VLAN tags:
        
- An inner tag that specifies the customer's VLAN ID.  This tag
  is called the 'CE VLAN'.
        
- An outer tag that specifies the service provider's VLAN ID.
  This tag is called the 'metro tag', or the 'PE VLAN'.
        
The combination of inner and outer VLAN tags is used to uniquely
identify a particular customer's service flow.

Source file: CISCO-QINQ-VLAN-MIB
Last revised: 29 Nov 2004, 00:00 UTC
Identity: ciscoQinqVlanMIB
Base OID: 1.3.6.1.4.1.9.9.445

Imported Objects

CISCO-SMI	ciscoMgmt
IF-MIB	ifIndex
Q-BRIDGE-MIB	VlanId
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC	RowStatus TEXTUAL-CONVENTION (no object page)

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-QINQ-VLAN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-QINQ-VLAN-MIB::ciscoQinqVlanMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-QINQ-VLAN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-QINQ-VLAN-MIB::ciscoQinqVlanMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (23)

ciscoQinqVlanMIB		`.1.3.6.1.4.1.9.9.445`
ciscoQinqVlanMIBNotifs		`.1.3.6.1.4.1.9.9.445.0`
ciscoQinqVlanMIBObjects		`.1.3.6.1.4.1.9.9.445.1`
cqvTermination		`.1.3.6.1.4.1.9.9.445.1.1`
cqvTerminationTable		`.1.3.6.1.4.1.9.9.445.1.1.1`
cqvTerminationEntry	IF-MIBifIndexcqvTerminationPeVlanIdcqvTerminationCeVlanId	`.1.3.6.1.4.1.9.9.445.1.1.1.1`
cqvTerminationPeVlanId	Q-BRIDGE-MIBVlanId	`.1.3.6.1.4.1.9.9.445.1.1.1.1.1`
cqvTerminationCeVlanId	Q-BRIDGE-MIBVlanId	`.1.3.6.1.4.1.9.9.445.1.1.1.1.2`
cqvTerminationPeEncap r/w	CqvEncapsulationType	`.1.3.6.1.4.1.9.9.445.1.1.1.1.3`
cqvTerminationRowStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.445.1.1.1.1.4`
cqvTranslation		`.1.3.6.1.4.1.9.9.445.1.2`
cqvTranslationTable		`.1.3.6.1.4.1.9.9.445.1.2.1`
cqvTranslationEntry	IF-MIBifIndexcqvTranslationInternalPeVlanIdcqvTranslationInternalCeVlanId	`.1.3.6.1.4.1.9.9.445.1.2.1.1`
cqvTranslationInternalPeVlanId	CqvVlanIdOrZero	`.1.3.6.1.4.1.9.9.445.1.2.1.1.1`
cqvTranslationInternalCeVlanId	CqvVlanIdOrZero	`.1.3.6.1.4.1.9.9.445.1.2.1.1.2`
cqvTranslationTrunkPeVlanId r/w	CqvVlanIdOrZero	`.1.3.6.1.4.1.9.9.445.1.2.1.1.3`
cqvTranslationTrunkCeVlanId r/w	CqvVlanIdOrZero	`.1.3.6.1.4.1.9.9.445.1.2.1.1.4`
cqvTranslationType r/w	Enumeration	`.1.3.6.1.4.1.9.9.445.1.2.1.1.5`
cqvTranslationCosPBits r/w	Enumeration	`.1.3.6.1.4.1.9.9.445.1.2.1.1.6`
cqvTranslationRowStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.445.1.2.1.1.7`
ciscoQinqVlanMIBConform		`.1.3.6.1.4.1.9.9.445.2`
ciscoQinqVlanMIBCompliances		`.1.3.6.1.4.1.9.9.445.2.1`
ciscoQinqVlanMIBGroups		`.1.3.6.1.4.1.9.9.445.2.2`

Dependencies (18) 6 direct · 12 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-QINQ-VLAN-MIBciscoselected
- CISCO-SMIcisco1 symbol
  - SNMPv2-SMIrfcdefault fallback3 symbols
- IF-MIBrfcdefault fallback1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- Q-BRIDGE-MIBrfcdefault fallback1 symbol
  - BRIDGE-MIBrfc3 symbols
    - IF-MIBrfcshared1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared2 symbols
  - P-BRIDGE-MIBrfc1 symbol
    - BRIDGE-MIBrfcshared5 symbols
    - SNMPv2-CONFrfcshared2 symbols
    - SNMPv2-SMIrfcshared5 symbols
    - SNMPv2-TCrfcshared4 symbols
  - RMON2-MIBrfc1 symbol
    - IF-MIBrfcshared1 symbol
    - RMON-MIBrfc12 symbols
      - SNMPv2-CONFrfcshared3 symbols
      - SNMPv2-SMIrfcshared8 symbols
      - SNMPv2-TCrfcshared2 symbols
    - SNMPv2-CONFrfcshared2 symbols
    - SNMPv2-SMIrfcshared8 symbols
    - SNMPv2-TCrfcshared4 symbols
    - TOKEN-RING-RMON-MIBrfc5 symbols
      - RFC-1212rfc1 symbol
      - RFC1155-SMIrfc2 symbols
      - RFC1271-MIBrfc5 symbols
        RFC-1212rfcshared1 symbol
        RFC1155-SMIrfcshared1 symbol
        RFC1213-MIBrfc1 symbol
        IANAifType-MIBrfcshared1 symbol
        RFC-1212rfcshared1 symbol
        RFC1155-SMIrfcshared6 symbols
  - SNMP-FRAMEWORK-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared2 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared2 symbols
  - SNMPv2-SMIrfcshared7 symbols
  - SNMPv2-TCrfcshared4 symbols
- SNMPv2-CONFrfcdefault fallbackshared2 symbols
- SNMPv2-SMIrfcdefault fallbackshared3 symbols
- SNMPv2-TCrfcdefault fallbackshared2 symbols

Dependency-first compile order

Type Definitions (2)

CqvEncapsulationType	Enumeration	`isl(1)` `dot1Q(2)`
CqvVlanIdOrZero	Unsigned32	`range: 0..4094`

Conformance Groups (2)

ciscoQinqVlanTerminationGroup	cqvTerminationPeEncap cqvTerminationRowStatus Objects for providing configuration for QinQ termination.	`.1.3.6.1.4.1.9.9.445.2.2.1`
ciscoQinqVlanTranslationGroup	cqvTranslationTrunkPeVlanId cqvTranslationTrunkCeVlanId cqvTranslationType cqvTranslationCosPBits cqvTranslationRowStatus Objects for providing configuration for QinQ translation.	`.1.3.6.1.4.1.9.9.445.2.2.2`

Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.445.2.1.1

The compliance statement for entities which implement the Cisco
QinQ MIB.

Required groups

mandatory	ciscoQinqVlanTerminationGroup
mandatory	ciscoQinqVlanTranslationGroup

Object refinements

Object	Access	Description
cqvTerminationPeEncap	readonly	Create/Write access is optional.
cqvTranslationTrunkPeVlanId	readonly	Create/Write access is optional.
cqvTranslationTrunkCeVlanId	readonly	Create/Write access is optional.
cqvTranslationType	readonly	Create/Write access is optional.
cqvTranslationCosPBits	readonly	Create/Write access is optional.
cqvTranslationRowStatus	readonly	Create/Write access is optional.